3D print emergency shelter structures then wrap in plastic. People can hang clothing, pots and pans, LED lights, etc off the lattice work or tie a string across the structure to hang laundry to air dry. Perhaps that 3D structure wrapped in burlap with sand poured in the top would make a more effective Hesco barrier for military or flood control - print what you need on site. I think the 3D shaping would be great for artificial reef generation or the large aquarium market. Float makers (Mardi Gras, Rose Parade, Thanksgiving parade, etc) would go nuts for this ability to 3D print complex shapes.
@Ringer19827 жыл бұрын
What ads about 3D printing are never mentioning is the speed of printing.
@brucebaxter69237 жыл бұрын
Suggestion? Try printing from the ceiling downwards to avoid collapse/sag when hot. (Even small bends weaken compressive members but if printed in tension the beams are being straightened by tension) Hang robot from ceiling to increase print area
@Fabian-dn6hs3 жыл бұрын
Connecting this with topology optiimalization for specific cases would be awesome. You would have scafolding made to be the best for certain problem (loads, stress etc.).
@arcitejack7 жыл бұрын
6 minute video and not one sequence of the printer working for more than 3 seconds. Couldn't you just let the camera stay on the printer without cutting so much? Over editing at its worst. Great tech though. Poorly presented.
@NickChambers7 жыл бұрын
Jack Wardrop From what I understand, I think the printing technology and process are competitive trade secrets. Maybe they didn't want to share too much in the movie?
@rocketssss67 жыл бұрын
That is exactly it, Why would I show you hours of print process perfecting, only to have it copied overnight by a competitor. You have to understand, robots are cheap, 3-5k in some instances for used, and the competition is stiff in this new era of printing with misc materials.
@KarlSingline7 жыл бұрын
pfft.. can't be that hard. I'll do a tutorial.
@jul9cuz6 жыл бұрын
Yeah and what was that structure they built? Utterly useless. Show something interesting being printed.
@choi88237 жыл бұрын
I think they always thinking for the future! It's amazing.
@matheusmartino77476 жыл бұрын
I think it would be amazing if your company could also devop or help implement metods to produce 3D filaments from recicled plastic. There is no point in using plastic as buiding material if it is not made from recicled plastic.
@michaeld9546 жыл бұрын
What about using it to make a pourable concrete mold for it print in place for a house and use the plastic as infill in place of rebar and make the walls plastic pour the concrete in the voids and make a stronger more easier home to build
@kistuszek7 жыл бұрын
K, how do i print a kuka? :)
@piotrlenarczyk58037 жыл бұрын
Cool, almost the same quality/price coefficient as skilled bricklayer.
@PharaohNai6 жыл бұрын
how can this scale up? Like this is cool for small architectural stuff, but can this be applied to high rise? I dont think so
@PS-nf3xw6 жыл бұрын
Makes more sense now
@piotrlenarczyk58037 жыл бұрын
Luckily it is allowed to mix that buildings composite with spacialy printed skeleton with ordinary triangles known from GPU rendering algorithms.
@joseangelsuarezhidalgo36737 жыл бұрын
seria muy útil que lo tradujeran a español
@Amonjaelove6 жыл бұрын
Jose Angel Suarez Hidalgo jjg Mehkuubhmmj Ynzjlh J B.B. mzzbv.vNGHZrbn
@NEWSITYRAP7 жыл бұрын
This is not new : ) Tower Aifla is the same motif architecture nad bridges.. .
@FletcherStults7 жыл бұрын
print the worlds largest benchy
@williamhuang53293 жыл бұрын
Hanzhen harmonic drive gear , robot gear , over 30 years experience
@bradhaaf47497 жыл бұрын
Thought of this so long ago for cheap bikes.. have you tried printing a bike ? Remember a new battery from university in australia made of flame retardant gel they were thinking of building into concrete wall would work perfect in this application becoming part of the composite.. hmm used to be a video with a demonstration wall seems to have been taken down or made private all i could find > www.startupdaily.net/2016/04/uk-firm-armstrong-energy-makes-11-million-commitment-sydney-renewables-startup-gelion/
@bradhaaf47497 жыл бұрын
23;40 www.abc.net.au/catalyst/stories/4398364.htm
@antonbolev1017 жыл бұрын
What software does the guy at 2:40 use on the right screen?
@Vega-3807 жыл бұрын
looks like Rhinoceros ( left screen) with grasshopper (right screen). it is a parametric software embedded in Rino. I hope this helps you. cheers
@KarlSingline7 жыл бұрын
should have my tutorial up for this within a week
@mentorshipstem7 жыл бұрын
German engineering!
@keine0317 жыл бұрын
Unfortunately it will be chinese management... and you can bet they will start injecting more and more chienese engineering. Kuka was bought by the chinese.
@0x1EGEN7 жыл бұрын
Ugh these bullshit "German engineering!" comments are annoying. Ya, it's great to see that Germans are capable of creating technology like every other nation. Almost every single KUKA video, I find someone talking about how impressive German engineering is. Ya'll aren't the master race anymore, kiddo.
@samsmith15807 жыл бұрын
Not a building.
@stephtsamu48356 жыл бұрын
Iiwantacreekmeusik A1A Greekmu
@stephtsamu48356 жыл бұрын
Ok good luck with greekmeusik
@krodickens6 жыл бұрын
😘🏀
@chautrongan61836 жыл бұрын
THANK SIR, GOD BLESS AMERICA AND GREECE-ROMAN IN FAITH LANDSCAPE GARDEN RESORT, LOVE GOD OF ROMAN IN HOPE BEST RELAX LIVING, RIGHTEOUSNESS GREAT STANDARD QUALITY AND QUANTITY IN MY FIRST ORDER FOR MY LANDCAPE HEXAGON HOME SMALL RESORT. AMEN
@keine0317 жыл бұрын
This is now a chinese company. Say goodbye to german quality. Nicely done...