BumbleBee Rebuild Part 7

Starting to reassemble bottom end of the motor.
New oil pump
New rod bearings
New crank bearings
New crank balance shaft bearing
Back cut transmission.

[@danielsharpe8065]

Did the gears all come like that where did they come from

[@blueovalOdell]

What do you charge in total to fix the trans? Mine is starting to really grind going into 2nd. It’s a 2006 M109R with a little over 20,000 miles

[@lhcycles1301]

If yours is grinding, more than likely it is a clutch cable adjustment. The infamous second gear problem is that it pops out of second gear. To fix that it is roughly $3600, which includes a transmission that has been back cut in all 5 gears and hardened shift rods.

[@blueovalOdell]

@@lhcycles1301 ok. Thank you. I will try to adjust the clutch.

[@bigpapam109]

@@blueovalOdell you're welcome. Look for our clutch video and at the end I talk about adjustment

[@danielsharpe8065]

What's the bullet proof gearbox

[@lhcycles1301]

We send the stock transmission out to R&D Motorsports in Florida. They magnaflux and check everything. Then they fix or replace anything bad, which is rare. All gears are back cut and then it comes back with solid shift rods and heat treated shift forks. Never have a problem again.

[@danielsharpe8065]

What would that cost me I'm in Australia

[@danielsharpe8065]

And my 2nd gear is minced

[@bigpapam109]

@@danielsharpe8065 he is about $900 usd