7 Causes of noisy transmission

[@fadzilicious4411]

Why is it always a super smart Indian guy that actually tells me how things work. Nobody else ever helps me with information. Much love from the U.K.

[@TheAbJGarage]

Thank you very much dear! Lots and lots of love from Ethiopia.

[@alynurani8]

Bros from Africa not India lol

[@LJ07EBP]

Same here

[@AlphaBravo-hy5lb]

@@alynurani8 LOL

[@fiercefix]

Because most of the folk that pioneered these principles & inventions are long gone & they didn't have an easy way to document them at that time, only mainstream recording sources of that time period (although some of these videos are out there) now the so called third would countries are catching up & treading a similar path as the originals & have an easy way to document their travels although not pioneering.kzbin.info/www/bejne/gICvpYZqi7qWrLMsi=B5xB4F8d6HkuvJM9

[@enjoythehunt5135]

Very well explained while having a transmission moving to focus on. Thank you

[@TheAbJGarage]

Thanks for watching! And thak you for the encouraging comment!!

[@houseking9211]

I just started noticing a clicking noise on second gear only, if the gearbox is already spinning and I engage second, even with the clutch still disengaged, I can hear it. Thank you for this well explained video, I'm almost certain that it's a worn syncromesh in second, I haven't noticed any loud pops or anything that could indicate damage to the second gear teeth, and seeing how the teeth are always contacting eachother switching to a different gear doesn't seem like it would stop the noise. I also drained the gear oil today, there was no sign of unnatural wear, though it was slightly overfilled, I changed the gear oil last fall, but the car already had 245k miles on the original gear oil.

[@bigstuff52]

Thanks for the upload..What a great cut away transmission and engine...

[@majibad8982]

i haave transmission grinding noise when decelerating in all the gears?

[@kafka0015]

Hello. What would your impression be if, say, you do a hill start (1st gear) and as soon as you give gas at the biting point, you get a humming noise? The said noise does not happen on flat road surfaces. Hoping you could provide some insights. Thanks!

[@عدنانالحذيفي-ذ5ك]

Thank you clear explain How can i set jcb transmissoin pressure

[@precisionlawncare8296]

Great video! What was not covered is noise on deceleration and what causes? When giving throttle no noise and only makes noise when letting off throttle and coasting 🤔

[@furrballer8377]

Input bearing

[@nastynate9529]

I have a new 2023 GTI that makes weird gear noise in neutral. Manual gearbox. Been thinking of taking into the dealership and asking questions. Typically gear box is always a tad noisy though.

[@DeepakKumar-lv4te]

not good. did you get an answer?

[@callumjackson8954]

That’ll be your throw out bearing most likely

[@matt19218]

1 of the nose happens in neutral but stops when you press the clutch in the others is a rattling sound which switching gears. The only issue is the noise no slipping or grinding slightly bumpy but I don’t think that is the transmission

[@godfather879]

Great videos thank you, Recently I changed do the clutch/Bearing/ fork of my fiat I noticed that The engine sounds louder when the clutch engaged, Also each time I Start the car a click sound comes from the clutch, Please can you help? Thanks

[@rkschanel2182]

can analyze the damage to the following manual transmission. 5 speed and 1 reverse gear 1. neutral is not noisy 2.Gear 2 slightly hums, gear 3 and 5 hum Only the sound of the gas being stepped on when the gas is released, there is no sound 3.Gear 4 is not noisy normally Can you analyze it? Is the output shaft gear faulty? Please tx🙏

[@TheAbJGarage]

Dear! Have you checked the condition of the needle bearings supporting the speed gears? Please check to see if needle bearings for 2, 3,and 5th gear are worn out or not! If those bearings are damaged it could lead to noise! Also it is a good idea to check the counter shaft support bearings!! Good luck dear!!

[@englishrose212]

My mini makes a noise sometimes when I change up into second gear from the back drivers side. Sounds like a rattle from the tyre. Any suggestions please. It's been serviced and MOT passed? Love your stream. 🤗UK

[@codycevering2733]

Great video man. You helped me pinpoint the problem on my 72 f250. Thank you for posting.

[@TheAbJGarage]

Am glad it was helpful! Thank you for your visit!

[@relive1956]

@@TheAbJGarage hello ,great video but you didn't talk about my particular problem ,very weird problem : my gear box makes noise only when the 5th speed is engaged and only when the engine is accelerated ! If i stop acceleration the noise stops . It's like a clok clok clok .What do you think about that noise please Sir ? Thanks for your response .

[@cosmicallyderived]

This video would be 1000% better capturing footage with actual noises on it that correspond to each description.

[@TheAbJGarage]

Happy to hear that!

[@tomamarian6863]

Heloo! I have a question: When I start the car morning, I am neutral. The sound isn't loud, but afther is worms the sound is very loud. If I press the pedal clutch pedal, the sound disappears. From wath I understood the previous one replase only the clutch nott full kit.And the car is a Mitsubishi l200 2013.Any advices? Thank you!

[@oursoundcardecor9829]

Sir I have waganor 2016 model . When running then come sound like maruty car moving sound . When I press clutch then no sound

[@against.d.system]

I have a gearbox bearing noise at any gear, but only when I'm not accelerating... The noise becomes noticeable after a few minutes, when oil is hotter (i supose) and when I put it in neutral the noise goes away

[@ivs8630]

Hello ABJ GARAGE , have some question, i have a manual pick up ( mitsubishi L200/mightymax ) everytime i shift on 2nd gear and 4th gear there are noise specially when i slow down there will be a noise like clanking sound. but it will be gone if i speed up. is it possible that my synchronizer on my 2nd and 4th gear are worn/damage? thank you

[@LexusPro]

When in neutral i hear a whining noise that gets louder correspondingly to how much i accelerate. When in drive i hear noise also, and gurgling noise if i accelerate hard.. In drive my acceleration is weak, and RPM will not go up much in drive unless i stomp on pedal for a downshift, and it is very jerky. However in neutral it will rev easy and smooth. What do you think? It is a Lexus iS RWD

[@wrathofpaulii]

I hear a spinning/whirling noise whenever the car is moving but coasting, either in neutral (clutch in or out) OR when clutch is pressed in, and still in gear (any gear). kind of goes away when it warms up. can't figure out what is making that noise.

[@ramg8176]

Is your problem solved? I'm also facing same issue. What part was replaced in your case?

[@nkosinathimavundla5660]

Hi my ford figo 2020 ambient is making noise in all gears is it safe to continue to drive cause it's drivable if I continue to drive what happens? I don't want to stuck on the road

[@rUANLEAKEy]

my manual transmission in my bronco II makes a screeching sound in 3rd and 5th gear. any idea what that could mean??

[@deanbyrne5334]

I see you are still liking even new comments so I will try a question I would really appreciate it if you were able to answer. So my car only makes nosie when any gear is selected but the car also refuses to move in any gear. Is this still a fluid problem or something more? I was driving and changed gear after making a turn and suddenly the car wouldn't move in any gear and made a horrible noise. Any help would be appreciated you seem very knowledgeable on transmissions

[@TheAbJGarage]

From what you just said I strongly suspect clutch related problems. The clutch is the part that is involved every time you change gears. And bad clutch system can stop power flow to the gearbox altogether. The clutch should fully disengage for smooth gear change and should fully engage after gear shift to allow power flow from the engine to the gearbox..

[@poohnay16]

2003 Neon SRT4 here. I have a knocking noise that only goes away when I put the car in gear and drive. Think it's my flywheel that came loose ? I see you didn't really cover the clutch on here much at all and yes it's manual btw.

[@XxLXWKEYxX]

I’ve got a problem with my 2014 vw jetta, the trans grinds when going into gear, in gear, and in neutral with the clutch out, but if I push on the clutch peddle the grinding stops. 5th gear was making a whistling noise for a couple days before this happened

[@stefan7034]

It's the input shaft bearing. It's common for it to be noisy and the noise stops when clutch is depressed. Not sure about the whistling noise in 5th gear..

[@ZahidKhan-pf3gg]

​@@stefan7034 that's the right answer as I've observe and solved this problem

[@tafadzwamurandu5258]

I have an automatic 2011 honda freed spike. There is a sound coming from the gearbox when the drive gear is engaged and it increases when i accelerate. The car is however performing perfectly in terms of speed and power. One mechanic checked the gear oil and observed some iron filings.

[@TheAbJGarage]

Iron filing in the oil could indicates excessive which can lead to noisy operation if not addressed quickly!

[@AhmedBahgat]

Great video, I have a question please, I have a little whining on 6 gear (manual) at about 100 km/h but only if I let go of the gas pedal, if I press the gas pedal even slightly the whining disappears, the whining is also there on other gears at same speed but less obvious than being on 6 gear, what bearing inside the gearbox you reckon is causing that? Cheers

[@josephhendricks6533]

I've got something similar on my 2018 corolla. 5th and 6th but mainly 6th it makes a whirring sound around 65 to 75. Like a Waugh Waugh Waugh noise. Goes away when you push in the clutch. Stresses me out being the only car I've got.

[@AhmedBahgat]

@@josephhendricks6533 I bought all bearings inside the gearbox, waiting now to be delievered from the States, I just decided to chage all bearings and oil seals for all 3 shafts and the diff, I am also changing the diff with a Quaife one that is helical instead of the rubbish clutch based LSD. Cheers

[@Albe983]

Sorted?

[@Albe983]

@@josephhendricks6533 sorted?

[@AhmedBahgat]

@@Albe983 Yeh mate, all good now, the car is like brand new. Cheers

[@YGDification]

I switch my DMF to a SMF and of course, with al the kit new on my Zafira B 1.9 cdti, and i have some "grinde" and "knock-knock" noise on idle ! :(( When i rise the rpm or normal driving the transmission is quiet and ok, and also in every gear change!How bad it is ? :((

[@ben7ani]

What could cause my car too sound noisy when travelling between 40-45mph specifically? It sounds like its revving higher but this isn't registering on the rev counter. It doesn't matter if my car is in gear or not and doesn't matter what gear. If I am travelling at 50mph and take my foot of the gas, as the car slows down to 45mph the noise increases and then disappears when it goes below 40mph. Very odd!

[@jaredvalisno7762]

Hi I have a question when I shift gears even when the car is off it makes some clunking sound somedays it dissappear sometimes early in the morning when the car was at rest it doesn't have that sound after driving for a while it comes back it makes the sound on all the gears.

[@kiritosd5]

Excellently explained 👌 But i have a question. I have a Ford Classic and when my engine is lugged, there is a strange squealing noice, that goes away as soon as I rev it high. This started happening after i had a sudden breakdown because of a worn out clutch and got it replaced from an unknown mechanic. Any idea what could be the problem?

[@knight6757]

Release bearing....

[@kennethrobinson1672]

Thanks..my truck is doing the same thing ,you explain down to a t what my truck is doing How can you fix the release bearing ?

[@biggy1278]

I have a question my car makes a kinda scraping noise in neutral when I hold it under first is it normal if not how do I fix

[@sudgur990]

great video with live illustration

[@TheAbJGarage]

Thank you so much 😀

[@blessedagricfarm]

Thank you but what can I do when my is doing in all gear and it happened anytime gear is changing on driving it?

[@mitchell_9709]

Hi, I have a vaxhaull corsa e 1.4l 2015, There is this noise it sounds like there is a bit metal that is scraping inside the engine near the clutch/camshaft, on right hand side of the engine. It sounds like it is making a noise everytime something in the engine rotates. would you have any idea what this could be ?

[@TheAbJGarage]

Can't really tell! But it clearly needs attention! Should look inside ASAP!

[@mohammadshabir643]

My sound comes when clutch is up, when I press it down sound goes. I have replaced the release bearing. I'm pretty sure now it's the gearbox do U think Lucas transmission oil will help.

[@TheAbJGarage]

It could be a problem within the transmission or the clutch itself.

[@wasimahmed460]

This happened to my car when pressing clutch down is ok letting go msking noise that needs a new clutch

[@banml8478]

My car makes a rattling sound in cold start but when pressbthe clutch the rattling sound dissappeared also, after teavelling few km. What could be the problem. Sc has change clutch assembly & release bearing. Butvthe rattling sound is still there.

[@TheAbJGarage]

Are you living in extremely cold area, if you are, the transmission oil will become thick at cold temperature, this will cause very noisy transmission as oil viscosity increase makes lubrication very difficult. When clutch pedal is depressed, the power flow to the transmission will be temporarily interrupted and hence noise will be reduced. As the car is driven for a while, the oil will become thin again, coming to the right viscosity making lubrication great again and consequently reduced noise.

[@trinathreddy1420]

My 2018 honda fit automatic transmission makes noise only when i am driving below 5 mph for example coming to a stop or driving under bumper to bumper traffic. If i give just some acceleration it goes away. It comes with or with out brakes. What could be the reason.

[@TheAbJGarage]

Could be issues wit the torque convertor or transmission oil pump!

[@tebogosangweni5487]

Hello what causes the gears to burn inside gearbox?

[@TheAbJGarage]

Most probably excessive friction caused by lack of proper lubrication! Overloading and oil contamination can also cause this.

[@568shahzaib]

Hi sir I have corola 2010 manual transmission.i am facing problum noisy in all 5 gears during driving.when I press clutch padel or during driving high speed make neutral finsh noise.please answer me thanks

[@perrry_ho]

Did you ever figure out if there was anything wrong with your transmission?

[@zero_pc_6234]

Hi I have manual car so i get noise when i take off in first gear sometimes there is a grinding sound when driving, feels like the noise if gears are not connected fully and goes away when i change gear, and happens to to next gear. only happens on 1st 2nd and 3rd sometimes is it becuase of low gear oil?

[@TheAbJGarage]

If the noise is coming from inside the transmission it could be caused by worn out parts due to lack of lubrication. 1st, 2nd and 3rd gears all share same counter shaft and any defect on the counter shaft or its bearings could make it noisy

[@SG901]

good explane. i will try to point out now i understand more about the werking. thanks

[@TheAbJGarage]

Glad it helped

[@obolimome2984]

Am glad to see dis but I have a question I have nissan urvan 2020 it have sound on neutral I have change the clutch kit and all the bearings the sound has changed little bit has befor but still have same sound

[@jacobinaipumbu9156]

I have polo tsi manual gearbox but whn you start in make sound at gearbox side but if push in clutch and the sound is gone if you release the cluch the sound start again what is the main cause myb???

[@TheAbJGarage]

Could be caused by bad countershaft bearing, or other faulty parts in the gearbox

[@ZahidKhan-pf3gg]

I've faced same problem,when i open and checkd the gearbox,there was a broken ruler bearing consisting in the gear which is transfering power from engine to transmission

[@JohnLedge-b2m]

makes a bunch of clicking noises and grinding when i put it in park do you know what that could be

[@gasisthepastendoil]

mine is noise when shifting....boat motor da da da da when releasing clutch..... Every single part is brand new anybody know what this is?

[@TheAbJGarage]

Check to see if the clutch is fully disengaging. If it is not fully disengaging, that will make synchronization difficult, leading to noisy shifting.

[@AlphaBravo-hy5lb]

Can you help diagnose this issue? Car not moving - No noise in neutral - Move shifter left to 1st/2nd position --> hear rubbing noise - Push clutch pedal while still in left 1st/2nd position --> noise goes away Car moving - Select 1st gear and drive --> hear rubbing noise - Push clutch, still moving --> hear rubbing noise - Let car slow down to a stop (still have 1st gear selected and clutch pedal pushed in) --> noise goes away

[@TheAbJGarage]

It seems like your selected gear is not fully engaging! Could be caused by worn out shift mechanism.

[@DillysNZ]

Hi. Great training setup. Question. Scania series 2, PTO setup with hydraulic pump. Was running pto for couple hours and when finished turned off but still had bad noise. No oil in gearbox, replaced oil but now gearbox has a really bad whine in first 3 gears in both high and low. Any idea? Maybe gears or is PTO issue?

[@DeepakKumar-lv4te]

output bearing maybe (assuming all the drive gear bearings aren't a problem).

[@murphyandmurphybrand]

I have a whirring noise at low speed, it initially started when turning right. But now it makes a noise in all gears but especially noticeable at 60mph. When the clutch is depressed, the noise disappears. Any idea what it could be?

[@TheAbJGarage]

Where is the noise coming from? The gearbox? the differential? the clutch housing? the drive shafts?

[@murphyandmurphybrand]

@@TheAbJGarage I don’t know. It’s very subtle but sounds like a wire stuck in a washing machine. More noticeable on the motorway when travelling distance

[@RinaMoolmann]

Hi need some advise please don't know anymore what can be wrong,it's a opel corsa gamma,car start put car in gear but car is not moving,replaced cv thrustbearing clutch plate pressure plate sceamed flywheel everything but stil not moving if someone please can tell us what to look at next

[@TheAbJGarage]

Have the clutch disc been installed correctly? If the disc is not properly installed or if there is wrong clutch adjustment, then the car may not move!

[@speedydanny4624]

i got an used gearbox in order to replace my own gearbox since my own gearbox needs bearings to be replaced.... but this used gearbox that i got...has a wierd noise when u reach a certain speed(it slowly gets noticed)...it doesnt sound like an used bearing..sounds different...usualy at high speed....not really sure what is causing that noise...(only gearbox ive replaced and the sound comes from it 100%) in the meantime...im planning to restore my gearbox by replacing all the bearings and putting it back..(hopefully) also i noticed something after a while....i think it loses oil from the top... maybe a sealing is not a sealing anymore..(didnt even checked them before i installed the gearbox on the car,totaly my fault...that i thought that gearbox was in good health..)

[@erangabasnayaka8598]

Great explanation

[@nubz0rzyou]

my car just started to make a light bump sound when i choose a gear at a stop with the clutch pressed in any idea on what that could be ? it goes into gear fine just has that sound that happens maybe 5/10 stops

[@nubz0rzyou]

i can feel it in my pedal

[@TheAbJGarage]

If you happen to feel the vibration at the clutch pedal when the clutch is depressed, then most probably it caused by a problem in the clutch system such as worn release bearing, uneven diaphragm spring fingers or irregular release fingers. Please check to see if the clutch system and all the linkages are in good condition!!

[@silpaganesh]

I have noise coming from my gear box when shifting gears.

[@rebirthed1274]

Same here😮

[@stEVEN_SMARTER]

My issue is a noise that only happens in gears 1 - 4 and goes away in gear 5 & 6. This video doesn't explain that scenario.

[@gofamodimoradilwana1260]

It does. Synchronizer assembly of those gears

[@stEVEN_SMARTER]

​@@gofamodimoradilwana1260 well it wasn't that, on strip down it was found to be bearings on the 1- 4 countershaft. This example is a single countershaft, my gearbox has two.

[@worthanyokonghay2397]

Thanks noise comes when releasing accelerator

[@Thesudstuds575]

What does it mean

[@henryvolau]

big noise when you release from gear 1???

[@TheAbJGarage]

This a teaching model and we were not fully using the clutch when shifting, that must have made it noisy!

[@ADDMEONPSN]

Thank you my friend.

[@TheAbJGarage]

You are so welcome!

[@lalithdesilva7943]

Thanks for sharing this

[@TheAbJGarage]

My pleasure

[@endless_touge]

I noticed a year ago some wired noise just like going fast in reverse while i release the throttle at 4-5k rpms in 2nd gear. Now seems like some teeth rubbing there randomly for few seconds also when downshift to 2nd or release the throttle at relatively high rpms. I am thinking some bearings are gone and shafts have some excessive play. Or maybe worst.Syncros or sleeves or the whole assembly need replacement. I can't do the job myself so i need to buy the parts before i bring the car to the shop because i live in a country where i can't find anything other than fake oil and filters. I used the car a lot on short track mainly in 2nd gear. Now i will pay the price big time

[@TheAbJGarage]

Sorry to hear that! And I hope it will all be just fine

[@terencegraham8414]

Good stuff Bra.

[@TheAbJGarage]

Am glad to hear that! It's really good to hear from you! Thank you very much!

[@LJ07EBP]

Great video keep going

[@TheAbJGarage]

Thanks, will do!

[@robertsteward7156]

😊I have a 02 f 150 it rattles when the mother gets worm it gets lounder

[@TheAbJGarage]

Bearing, gear and Shaft wear common causes of gearbox rattle. Poor lubrication, overload and bad driving habits are known to cause most of the damage.

[@roycemaundura5399]

Noise in gear 1 2 3 and neutral what is the problem

[@TheAbJGarage]

What vehicle is it?

[@ZahidKhan-pf3gg]

​@@TheAbJGaragesir my four system gear noises whinning in 1 2 3 gears and not in fourth what may the reason

[@victorubiofseismicmanpower7886]

very well explained

[@TheAbJGarage]

Glad you think so!

[@robertorochamartinsrocha7041]

very good video.

[@TheAbJGarage]

Thank you very much!

[@nivaeliakim]

Great work

[@TheAbJGarage]

Thank you so much 😀

[@jacobinaipumbu9156]

Good morning Sir

[@TheAbJGarage]

Hi there!

[@nadeembh71]

My car gear siftng easy but making nise in 3thd and 4th gear on ranning what s risan

[@TheAbJGarage]

What kind of noise? and when does it make noise? is it when shifting?

[@vesniqui3773]

The rattling one is gone

[@TheAbJGarage]

Glad to hear that!

[@HanifEFIMechanical]

good good

[@AdoLeplo]

Noise in 5th gear when running

[@TheAbJGarage]

What kind of noise? If it is a engine hunting kind of noise, it would indicate that it is not the correct time to select 5th gear.

[@MonuKumar-zj5dp]

Nice video

[@TheAbJGarage]

Very nice

[@hamirumar]

Well explained 💪💪💪💪 thx sir. 🫡🫡🫡🫡

[@mindinew]

Are you Ethiopian? Your accent resembles my ppl

[@ashiqshareef2271]

Only noise in 60 kmph

[@TheAbJGarage]

What kind of noise?

[@silpaganesh]

How can I contact you via WhatsApp?

[@GOKTURK28]

hey man,i have 2009 toyota camry and i have noise at 3th,4th gear "speed 40's" still hearing noise around 40's on "N" so what r u think is the problem?

[@tebogosangweni5487]

Hello what causes the gears to burn inside gearbox?