In this episode at the Sawdust Factory we work on some burls, or what we thought were burls.
Пікірлер: 39
@carolriley5696 жыл бұрын
Beautiful...can’t wait to see the finished piece!
@JoshBayerWoodturning6 жыл бұрын
Thanks Carol! I can’t wait to see it as well.
@gavincoyle5 жыл бұрын
Josh that looked great really enjoyed the video and looking forward to seeing lots more.
@clydeulmer44846 жыл бұрын
I like that bowl, Josh. I like gnarly wood -- nice, clean bowls are just bland. (picture Madeline Kahn in Blazing Saddles sniffing the bouquet of roses "how... ordinawy (sic)") Wrt the struggle roughing, let me offer this for your consideration: an 18" length of 5/8" 4140 steel hexagonal bar, hole drilled in one end to accept a 1/4" HSS metal lathe tool blank and drilled & tapped for a couple of set screws. Grind a sorta fingernail on the HSS blank and you can bludgeon *any* blank onto round without trouble :-) 4140 is a lot tougher than mild steel, the hex shape permits registration of a flat on the toolrest, and you can rotate to a flat either direction. Clyde
@JoshBayerWoodturning6 жыл бұрын
Great idea Clyde! I might have to make one of those. I have some D2 still laying around the shop somewhere, I’ll have to dig it out. I might even have a hex profile bar too. But it’s probably not 4140. I like character in my pieces as well. But this one was kind of disappointing since I walked in thinking I was going to get a great Burl piece out of it. Oh well lesson learned... don’t have high expectations till you know what’s behind the bark. That might have to be the title of my next video.
@moonwoodworks46073 жыл бұрын
Looks good, I have 3 burrows I've yet to turn, im hoping they are anyway. 2 were given to me and one I cut off a tree that had been knocked down beside a river in New Mexico a a couple years back. Working on getting my shop back on order since I got some new tools, or as my wife calls them "toys" over the Christmas holidays. I hit subscribe to see more of your work and would appreciate you checking out some or all my videos also.
@TimKollat6 жыл бұрын
I just found a bunch of desert ironwood that has a bunch of burl on it. The tree was dead and half of it gone from being chopped up. I cut it up and took all the burl home...Have no idea what Im going to do with it since I suck at wood turning. But man, what I did turn from the non burl ironwood looks great. This desert ironwood is some HARD stuff and has a ton of mottling. I had to sharpen my chainsaw twice just cutting a little of it up
@JoshBayerWoodturning6 жыл бұрын
Awesome!!! I wish I could get my hands on some of that, even iron wood without Burl would be great. It doesn’t grow in my region. Where abouts are you located?
@tammycornell19855 жыл бұрын
It is great. Thank you for no music. I am watching woodworking not a music video
@j.mcatee24326 жыл бұрын
Firstly, your video was Very interesting & informative. You do excellent work. I enjoyed it! However, as you are making a video, some small attentioon shd be paid to the audio. Perhaps voice over or printed comments would work. Also,& I guess you already noticed, attaching a camera to the lathe vibrates the picture to a blur. Loved the tip on keeping the wood moist. Thanks & keep on turning!
@JoshBayerWoodturning6 жыл бұрын
Thanks johnnie. I will have to investigate the audio issue. I had to use a new video editing software for this video and I wonder if I messed up the audio portion. Also I’ll be sure to note the camera movement as well in the future. Thanks for watching and sorry for the bad video quality this time. Stay tuned for more.
@gbelgie91466 жыл бұрын
I'm in eastern NC. Haven't turned any yet. Have the sections cut and put up to dry. The vines have died off leaving the twisted effect. Not sure if will only be the sap wood affected or if the Heartwood will also be altered. Thanks for the reply.
@calvintristen93843 жыл бұрын
i realize Im kinda randomly asking but does anybody know a good website to watch newly released tv shows online ?
@camdenlouie14243 жыл бұрын
@Calvin Tristen ehh lately i have been using Flixportal. just search on google after it:) -camden
@calvintristen93843 жыл бұрын
@Camden Louie thank you, I went there and it seems like they got a lot of movies there :) I appreciate it !
@camdenlouie14243 жыл бұрын
@Calvin Tristen happy to help :D
@Edgunsuk4 жыл бұрын
did you say irregardless ? regardless means without concern prefixing it with IR just means without without concern, ie with concern double negative thing ....ye ye i know just thought i,d point it out , and i,m dyslexic also i,d have preferred to turn the first burl
@anthonytoscano56325 жыл бұрын
Your pin seems to out of round, looking straight down, maybe I'm wrong, guess a 1/16 wobble
@mattm34923 жыл бұрын
How much is Burl worth? I found one on a live tree and it's got to be every bit of a 1000lb and if I'm not mistaken in on a black walnut but if have to go look again because it's been 2 years since I've been back there
@JoshBayerWoodturning3 жыл бұрын
Kind of depends on a lot of factors. Also is often difficult to find a buyer. Usually they have to be processed and dried before sold.
@MikeVal13695 жыл бұрын
Sounds like a steam locomotive when it's not sped up :)
@gbelgie91466 жыл бұрын
Josh, I'm able to lay my hands on a mess of vine twisted maple, cherry, and beech. Have you ever tried turning anything like this? Thanks.
@JoshBayerWoodturning6 жыл бұрын
No I haven’t ever turned anything with vines on it. Does it affect the pattern / appearance of the grain? Where about a are you located?
@mikewest38286 жыл бұрын
I've never worked with hard maple is it better go with carbide cutter
@JoshBayerWoodturning6 жыл бұрын
It might be. Honestly I don’t use a lot of carbide other than on my hollowing tool.
@CEG3RD6 жыл бұрын
Is this work as dangerous as it looks? I looked and noticed that thankfully you wear a face guard and stand to the side as much as seems possible. If one spun off and hit you a face shield might not be enough. Hopefully it's not as dangerous as it looks.
@JoshBayerWoodturning6 жыл бұрын
Yeah it’s dangerous.. I got hit in the head with a pretty good size piece of wood last year and it pushed on the face shield so hard against my skin I ended up with 5 stitches above my left eye brow. The key is properly fixing things to the lathe and checking wood stability as you go through out the project.
@toddbraun57055 жыл бұрын
Where do you find your burls?
@JoshBayerWoodturning5 жыл бұрын
Out in the woods next to a fence line a friend of mine was clearing.
@davidwalker84676 жыл бұрын
Can't hear vid!!!!
@S....4 жыл бұрын
Not.
@AllenORourke19546 жыл бұрын
👍👍👍🇬🇧.....
@JoshBayerWoodturning6 жыл бұрын
Thanks Allen!
@rodgerwitchey72775 жыл бұрын
Dude irregardless is NOT A WORD.
@markhepworth48045 жыл бұрын
Rodger Witchey 😂
@n.f.71865 жыл бұрын
Yes it is Dude. www.merriam-webster.com/words-at-play/is-irregardless-a-real-word-heh-heh