Burnout Truck Build Series Part 4: Fuel System Install On Our LS Swapped C10 And Making It All Fit!

In this episode we unbox and install our ‪@AeromotiveFuelSystem‬ fuel cell made for the 67-72 c10. Doing a little r&d to see if it will work with the 73-87 squarebody as well!
Join this channel to get access to perks:
/ @187customs
Be sure to drop a comment and subscribe to keep up with what we got going on around 187 Customs!
Get your official Murder Nova and 187 Customs apparel at:
www.themurdern...
Follow Us!
/ 187nova
/ 187customsllc
/ murdernova
/ 187customs_
/ phantom.405
/ 187customs

[@toddsmith4015]

I ain't gonna lie.... love when Monkey and the rest of the fellas are in the house... always entertaining

[@187Customs]

Totally agree. However it’s hard to accomplish things bc we get sidetracked easily 😂

[@rye0102]

Hands down my favourite type of video. Breaking balls with the boys.

[@leoreid5649]

The best one yet fellas, nonpressured productive fun with friends. Love the laughter

[@justinlandrum1110]

Phantom...mic sounds like he is talking under water😂

[@187Customs]

Yep. Still figuring them out.

[@victorbitter583]

@@187Customs Mic audio setting too high and overdriven as a result.

[@kevinbansbach7866]

@@187Customs Just put it on your hat. I’m hearing beard scratchin in my ear lol

[@DD-sw1dd]

Audio limiter has its tongue hangin out

[@Scootermagoo]

@@187CustomsPhantom if you do discord I have a channel full of audio engineers I can hook you up with.

[@justinslayton6266]

Hey guys, I just wanted to say thanks for the lunchtime videos and the great content.

[@Daybreakadventures]

Sucks Npk about to start up this is kinda like a real youtube channel lately lol

[@fsogarage71]

No doubt..I genuinely believe if the channel builds up enough to support them with some other outside deals they would much rather do this..but they are doing what pays the bills.

[@187Customs]

Don’t worry, I’ll be on the guys filming everything so there won’t be a shortage of footage even when we are on the road!

[@scottburrow8717]

No doubt!! My favorite page to watch. But I think Mallory has us covered for this season on content when Phantom can’t.

[@rickywiley9034]

Love the constant posts! Feels like im in the shop with yall

[@187Customs]

@@rickywiley9034 that’s the goal!

[@gareththickett9113]

Anyone watching with headphones I’ve got Shaun in my left ear and phantom in my right ear. Originally I thought my headphone was faulty with how crackled phantom was talking but I think phantom is a bit to close to the mic. Phantom if you see this. Shaun sounds crystal clear with his mic tucked in his cap

[@MrTrev69]

Tried 3 pairs and it's the same in all. Not sure how it works but maybe better to combine both channels. The crackling seems to be movement related but not sure cos I'm a moron, that's why I watch these guys 😁

[@davelaster9688]

Really enjoy all of your content and everything you do. It's been nice you're make more KZbin videos. Long time fan just wanted you to know I appreciate everything you do. See 👀 you on the next one ✌️

[@187Customs]

Appreciate it!

[@ed79k10]

Keep pumping them out, best channel on KZbin

[@Bamaflashlight]

On those Tailgate chains my dad Always used bicycle tire tube to slide the chains through to keep from scratching Truck.

[@traceyarnett2988]

I cannot get over how friggin cool this truck is looking vs the ride home..😅 its SICK!!!.. You guys definitely live up to your name.. 187 CUSTOMS.. Love it!!❤❤❤

[@dieseldawg9144]

Phantom, thank you for making sure that the closed captions are always on.

[@barrybazile1294]

Hey Sean look back in the day I had a 53 Chevy pick up truck deluxe model I have the same chain set up I eliminated the chain I just put a nut and bolt cause I didn’t plan on having my tailgate go down but back in the day so the chain don’t damage the paint on the truck you take a bicycle inner tube and cut it and slip the chain until the tube and that will be protect the bed of the truck and you just wrap electrical tape on the ends that’s how we did it back that truck looks good keep up the good work God bless you and your family

[@djk91lx28]

I’m loving the VGG references. They fight right in on this channel. 😂😂😂

[@bryankeene8362]

I really enjoy watchin yall do these builds.I don't even look at discovery anymore.Id like to see more of the same stuff your filming.Its cool...maybe include some of the ol 405 guys in there like you've done in the past.I liked that...And Phantom go easy on them boys they look up to you ..

[@veto8792]

Love this build series. These are my favorite vids from this channel by far.

[@brianbartlett7313]

187 Customs cranking out the videos, love it!

[@187Customs]

Thanks! We appreciate you! 👊🏼

[@briggiesmallz1453]

Love how much content u guys a dropping. Always feel like im in the shop with u guys.

[@Ada-zn3pw]

Awesome video guys. Shop videos with your buddies are my favorite along with the road trips. Truck is coming along great , can't wait to see Shawn burning some rubber. Congrats on the 250k guys

[@riverrat1284]

Going to miss the shop videos when NPK starts, but that’s where a lot of us get to meet y’all

[@josephgardner1330]

Hell yeah that old truck is coming together and looking good thanks for the video phantom

[@gixxernut8021]

U can put wire loom on those chains so it doesn’t mess the paint up

[@spy44yogi]

Man watching you guys with the guys around working brings back lots of memories. Difference is if its after 10 am on a Saturday me and my guys would be drinking some cold ones and nothing would get done lmao

[@timothybranham2487]

Trucks coming together great looks sharp...Jake has been around enough to not be camera shy the world has seen you Jake lol

[@nofanofthepope8983]

Big boxes 30 sec in…we all hope it’s smaller when we try them out.

[@michealhodge5202]

Probably one of the best videos yall have done

[@troyscholkowfsky3349]

It so nice to see how much fun you have in the shop . Keep up the good work !

[@kpskingdom]

Loving the new mics, they sound insane!

[@Trent083]

Lol @ the major league references...classic movie

[@187Customs]

You can always count on us for good movie quotes 😂

[@andrewrice3362]

These videos just keep getting better you guys are killing it

[@ddl10]

On my old truck tailgate I put a bicycle tube over the chain just like the old days

[@yattaran1484]

Always my pleasure to watch your videos !.

[@1sicsrt]

Y'all could put white vinyl decal material on the painted surface under the chains to help.

[@HeavyDKC1]

Shawn cracks me up, ive opened some big boxes in my day 😂. Me to man

[@ericdaugherty3774]

I know that equipment and man power is costly but I'd love to see more videos with Shaun and Phantom working on projects together.

[@fytokipos8442]

Early Bird special 🤘Right on...!🤙

[@187Customs]

👊🏼 appreciate you

[@grahammoore2145]

For the young bucks they were quoting one of the best baseball movies ever major league

[@quickdeuce]

O gotta tell ya's,, being from the Pacific NW (Seattle) seeing all those crystal blue skies and bright Oklahoma sunshine looks AWESOME!! Spring is spring'n in OK!

[@bryanrogers794]

I know it might not be the look y'all are going for, but there is clear plastic tubes that you can get for those chains. Slides over the chain to protect everything and flexible enough to still let the chain bend. Down side is over time they crack and have to be replaced. Up side is they about a couple bucks a foot!

[@jacoblynch8273]

Love all your content. I'm a ford guy waiting on more of the f150 stuf but I thought I'd tell ya something I learned about coyote. Apparently there's a whearwolf version cast iron special alloy that holds all the power.

[@bobbyross2552]

The guy who sold Shawn this truck probably had dreams of building something this cool with it

[@tommydrywater5559]

The fact you guys are like 20 min from me yet im watching this on KZbin makes me laugh. Videos keep getting better guys.

[@RustyEast]

Casper has come back from the dead and he's got nothing but hard times and bubblegum and he's fresh out of bubblegum 😮

[@charlesmains2414]

Outfreakingstanding gentlemen! Great job!!! 👍

[@c_meyer87]

Rattle cans are 100% being called powder coat around garage now🤣

[@craigbennett5910]

She’s coming together

[@jimritter7945]

It’s always fun when you guys get a group together. You guys are always laughing about something. Guy needs to laugh at times.

[@mdb83709]

What would it be like to say just send it to a $2150 fuel tank. Dang. Freakin awesome.

[@ryannmelancon4598]

Love hearing the Vise Grip saying in yall videos!!

[@littlelifters7543]

I just read this as Shawn asked if he should powder coat the bumper. Psssst psssst

[@jasonbose3507]

DUDE Shawn & Phantom, YOU GUYS are sooo funny 🤣. You both made my day! I love it when the three old friends (Monkey 🐒) get together. Always a fun and cool time for everyone when Shawn & Phantom are involved. Comedy just comes naturally to you both. Great video guys. Thanks 👍.

[@187Customs]

Glad you enjoyed it

[@nogle100]

I keep waiting to hear Phantom say "10-4 Good Buddy" or "Hey Good buddy, there is a Kojak with a Kodak"

[@TKsGarage405]

I hope that square body gaps the ford truck lol. Nice job this thing is shaping up!

[@brandaneakright6082]

Looking forward to seeing this stepside when it’s finished, keep up the great work guys.

[@karlguiney7359]

I could hang with you guys for real. You guys rock! Brings back memories wrenching on cars and busting balls.

[@187Customs]

Thanks man!

[@thatrebelboy48]

10:00 “what’s more square than a square body?” I immediately answer an obs 🤣

[@Chris-wb7ni]

Great video. Lots of laughs

[@jamesatlka]

Just get some big heat shrink to put over the tailgate chains and then you won’t have to worry about them anymore.

[@tonykrank3950]

Hey Sean on your tailgate chain the old school way to do it is to take a rubber tubing and slide the pain in their and then you have your safety and it'll bop around on that thing all day long no problem I'm sure you've got rubber hose from like the radiator or something if not an old garden hose works then just paint it white

[@chrisabercrombie4119]

Maybe Guinness world record burnout or doughnuts with truck.

[@victorbitter583]

Thanks for the laugh mate. That's cute. Cheers.

[@imasmartidiot3330]

I would dip them chains in liquid tape to give them chains a coat of rubber

[@shanemurphy-fb1rl]

Much love and respect for you and your family. Me my twin bro and dad love watching you. You build the coolest looking cars and trucks ever. Hope all is well with you and your family god bless and keep it up man.

[@DuaneSteep-go4tc]

The chains originally had a peace of black rubber over them

[@krisclements4983]

Hey guys. A solution to the chain dilemma. Get a length of clear hose just bigger than the chain, cut 4 lengths, equal to the drop of the chain, so 2 pieces per side. no damage to paintwork!

[@matttackel997]

Throw some shring wrap over those chains so they don't bang around and muff up the paint.

[@joshuamcnair2423]

this will be the best and actually driven burnout trucks. Seeing😍 that sexy 55 sitting there out in the sun

[@quickdeuce]

Them taillights are the cats pajamas! Luv 'em!

[@leonard383]

My 86 k10 stepside has that same nose that Aiden was wrenching on. I took it off 89 k5 I was using for parts. I took the power window doors and the air conditioning from the k5 an installed them on my stepside. Had to redo the firewall though to make the air condition box work though..

[@brandonb4462]

Shawn... Nice gas tank but I have seen several people have the same problem... If there aren't any baffles around the pump itself when you are pulling G's the pump will go dry n the engine goes lean and then boom... You need to weld baffles around the pump or put a small tank under the hood n run that pump into the small tank n from there to the engine...

[@187Customs]

I’m sure Aeromotive engineered a fuel cell as to not starve their fuel pump lol

[@brandonb4462]

Ok man I was just trying to help ya out... Ask Derrick from Vice Grip Garage... I watched him and others struggle with that problem

[@brandonb4462]

Airmotive didn't design that fuel tank to be slinging around in circles doing donuts probably more of a race car rallycross autocross tank either way unless the tank is full without any baffles occasionally it will starve for gas I think... But I'm no expert just herd some things... I would ask a professional like Cleetus or some Aussies who do this all the time just to make sure I didn't blow up an expensive engine up for the price of a little bit of aluminum

[@187Customs]

@@brandonb4462 ok

[@simostravels8030]

Hey fellas I’m probably a bit late but why don’t you put like a clear flexible hose around the chains on your tail gate that would save it from scratching and that’s if you can of course

[@garypowell134]

The Major League II references! Going to miss these shop builds. Too funny!

[@187Customs]

More to come!

[@Blkchevelle]

250k subscribers! Congrats

[@187Customs]

Thanks Tim!

[@jamesgerholdt2742]

All coming together nice guys looks badass. Loving all these videos that r dropping. Oh btw i see shawn finally getting his other tattoo sleeve going looks good.

[@troy7844]

Coming along nicely, ready to see y’all getting slide ways !

[@Nitrous660-]

I think yall should bring the burnout truck to Cordova dragway this June. I got myself the ROCKSTAR VIP pack for that event... so I wanna meet yall this time. @187customs

[@187Customs]

We will be there!

[@dustinhunter8537]

Only thing missing in this video is a pile of bikes out front and someone’s dad cussing love it

[@Dougprince72]

@187customs the old step side chains had a clear rubber plastic on the chain, to protect the paint on the bed .

[@crazyd1377]

Y’all missed a step Shawn on the bed! It has rubber mounts the bed sits on! That’s what keeps itt from rattling!

[@187Customs]

Nah man I don’t think so lol

[@SilverC8andDroppedC10]

I have only messed with one big box. Didn’t like it so decided to stick with smaller box.

[@donaldcreg5110]

I worked at the GM truck plant as cheat and light weight as the frames are I would be putting that cross brace back in.

[@crazyd1377]

Y’all are outta control with the shit talk! Luv it

[@andrew9754]

Phantom the mics are a great addition but you need to put yours on your hat like shawn nobody is gonna see it will make for way better experience just a small thing but will make a huge difference and way less annoying to listen. You guys Rock !

[@jmayhaus]

THE BURNOUT TRUCK IS GOING TO BE EPIC

[@williamowens162]

Great video awesome job guys it's going to look so sweet when its done can't wait to see it done

[@stevenrobinson4643]

I always love the major league references lol gets me everytime

[@tylerhebb2589]

Can’t wait to see that truck in action!! Great job with everything guys keep it up! 🔥

[@fv6927]

The truck is looking awesome can't wait for the first burnouts

[@williamstewart3497]

Get a bicycle wheel tube cut it to the size you need for the chain and put the chain through it

[@robinwendt5527]

Coming together and I dig the all white!

[@allgasmn6555]

Gotta bring it to a cleetus and cars event bro

[@quickdeuce]

@40:00,, good on ya Shawn,, take your boy over there and show him what needs done then go. Trust that once he's done it without you hovering he'll remember the rest of his days. Only thing I'd 'maybe' have done is tell him grab a bucket, put every tool he may need in it then go out and commence. That may save him some trips back and forth to the shop. [edit] Tell him to PUT ALL THOSE TOOLS BACK FROM WHENCE THEY CAME WHEN HE'S DONE.

[@soarinsoarer1]

Shawn don't worry about the small gapes etc . In a burn out comp if you tap the wall small gapes are nothing .Just ask farm truck what it's like to tap a wall and how much damage it does .. summernats

[@danlundquist3907]

Lots ■ body ❤ happening! I notice 🐒 has been around the shop alot lately. Are we going to be seeing him more in your videos? Keep up all yhe great content! 🔦🏁💰🤑🇺🇸

[@benjamincoleman966]

Ahh thursday its almost as good as tuesday

[@quickdeuce]

@34:05,, Luv that Krylon aroma 🙂

[@tedphillips6826]

looking good fellas .Getter done ...love from OHIO...

[@Collinsmotorsports1848]

They make a&n fittings for the roll over valves will help fuel flow for the smoke show

[@Bosshog-nu6vw]

It’s going to be nasty

[@leonard383]

That stepside is going to be bad ass! Not really fan of the tail lights though.. some led’s that look like the originals would look a lot better.

[@TheFordman411]

Put clear hose over the chains.

[@TheTileGuys]

Y’all gonna be taking this car to the Freedom 500 burnout contest? Excuse me truck

[@Ada-zn3pw]

I think the LS fest burnout competition was the plan. But I'm sure they'll try hitting some more if they have time