Beginner Woodworking Guide to Table Saw Blades (Which table saw blade should you choose?)

This is a poorly edited, terribly spoken, and indecently covered crash course on table saw blades, the different types, and differing purposes of each. I hope it's educational for you and slightly entertaining.
My Website:
www.burnstockdesign.com

[@shawnlapier]

Congrats to the winners. Hope they can get some good use out of the items. Always appreciate when content creators try to give back a little to the people that support them in their success.

[@burnstockwoodworking]

Thank you!

[@christianrobinson4526]

Congrats to the winners! And congrats on the new shop! I'm looking forward to watching the build process for the shop and see what you can do with it.

[@burnstockwoodworking]

Thank you!

[@MCsCreations]

Thanks a bunch for all the tips, dude! 😊 Congrats to the winners!!! And congrats for the new shop!!! 😃 Stay safe there with your families! 🖖😊

[@burnstockwoodworking]

Thanks! 😃

[@jeffceriotti]

Congrats to the winners! Can't wait to see the shop build process.

[@burnstockwoodworking]

Thanks!

[@frankgreen7988]

There is a way of cleaning your blades to you take some soap and little bit of water and classic brush and you go towards the way the blade cuts rinse it off dry it off put it back on and it's good for another hundred cuts

[@burnstockwoodworking]

Awesome, I'll have to try that!

[@jinzo8598]

thank you for this video. I am an older person starting off learning this as a new hobby and i really appreciate the educational quality.

[@burnstockwoodworking]

You are so welcome, thanks for watching!

[@wesleylangston8286]

Congratulations Dustin and Brian!🎉🎉🎉 I hope that these new tools give y'all more opportunities to grow your business and provide for your families. Stay blessed! And Sir Marcus, great informative video. I remember when looking at blades was like trying to read another language 😂

[@burnstockwoodworking]

Thank you sir!

[@Professorfixit]

I’ve found Dawn kitchen soap or Simple Green cleans blades great. Although they do get dull, but regulating cleaning definitely prolongs their life and reduces the frequency of necessary sharpening.

[@mikeholland721]

Love your channel, I and getting ready to retire in a couple years and want to do woodworking as a hobby/side hustle. I am getting a 14x20 building ready for my shop. I still have insulate and wire it before it is fully finished. My dad passed last November and left me with several good tools and equipment to start with. Thank you for your humorous and informative videos. Keep up the great work.

[@burnstockwoodworking]

Glad you like it and my condolences. Hopefully the upcoming content will be very helpful for you!

[@chuckfalgout9596]

Congrats to the winners. Thanks as always for the content, Marcus. I'm at that point in my woodworking where I need to start using multiple blades, so this was timely!

[@burnstockwoodworking]

Glad ya like the content, thanks for commenting and support! I truly appreciate it!

[@ellenmcgrath8241]

I am so happy for you getting a dream shop. Congratulations!

[@burnstockwoodworking]

Thank you so much! I'm stoked!

[@bdwooddesigns]

Radial arm saws are awesome! Especially if the can take dados!

[@burnstockwoodworking]

I'm looking forward to being able to use it. I'll have to verify if it takes dados, I thought it was a given. If it doesn't....guess I'll have to buy a second one 😆😆

[@MCsCreations]

Do you know what "dados" sounds like in Portuguese? Fingers. 😬

[@bdwooddesigns]

@@MCsCreations lol

[@justinbanks2380]

Look forward to following your progress on the new shop!

[@burnstockwoodworking]

You and me both!

[@frankmckie2992]

Wow, looking forward to the new shop build, thanks for the info on blades I allways went with 40 plus tooth but will be looking more indepth when I go shopping now lol...... 🙂👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@burnstockwoodworking]

Glad to help!

[@briand.beverlyii4868]

Love the channel. Love your humor. Thanks for your generosity!

[@burnstockwoodworking]

Glad ya like it, thanks for the continued support!

[@jackiefisher4677]

Hey thanks for all your advice you provide. I'm just starting out woodworking here in the UK. Love your channel.😊

[@burnstockwoodworking]

Awesome! Thank you!

[@SciStuff]

Congrats on the new shop project. Looking forward to seeing the progress.

[@burnstockwoodworking]

Thanks!

[@burnstockwoodworking]

Thanks!

[@kevinr1704]

CMT also makes a really good blade. You can pick them up pretty cheap at Taylor tools. Congratulations to the winners!🎉🎉

[@burnstockwoodworking]

Haven't tried their blades yet

[@kevinr1704]

@@burnstockwoodworking I bought a 10" combination blade about 6 months ago, and it's been a great blade.

[@gsilcoful]

Congrats Brian and Dustin.

[@burnstockwoodworking]

Thanks 👍

[@thumbwiz]

Awesome video, great news, and congratulations to the winners of your amazing giveaway!! Looking forward to the next video.

[@burnstockwoodworking]

Thanks so much!

[@jimrodman2378]

Congrats to the winners

[@burnstockwoodworking]

Thanks Jim!

[@thehickorylanewoodshed2378]

Congratulations to the guys that won!

[@burnstockwoodworking]

Thanks!

[@niccolealdrich4890]

Excellent information! Thanks for sharing !

[@burnstockwoodworking]

Glad you enjoyed it!

[@myhoneyshandmade1077]

Congrats on the new shop.

[@burnstockwoodworking]

Thanks!

[@JerryMabrey]

Even though I didn't win the laser machine congrats to the ones who did win and great content, blades can be confusing if your just beginning but great job explaining.

[@burnstockwoodworking]

Excellent attitude and thank you!

[@TenmaFN]

Something else of note trying to shove wet wood into any table saw will vastly decrease the speed you can shove it through, especially if you are working with pressure treated. Its why you should setup a drying rack or put the wood under a shelter with sticks between the boards so it will dry. Letting it dry also decreases weight you have to throw around.

[@burnstockwoodworking]

Excellent input, you're dead on!

[@northman6269]

Thanks for the info. Great content. Just looked, and I have a cross cutting blade 🤦‍♂️. Time to get a rip cutting blade hahah

[@burnstockwoodworking]

😆😆 I did the same thing years ago. Trust me, it makes a WORLD of difference!

[@BassadorWoodworking]

Welcome to the Radial Arm Saw gang!

[@burnstockwoodworking]

Thanks! Will I be getting a welcome packet in the mail? 😆

[@justinbanks2380]

Not sure how involved it would eb for you to make, but would definitely be interested in a video on how you make your board butter.

[@burnstockwoodworking]

I'll do it soon, just gotta figure out how to store the excessive surplus of it.

[@robertsmith3518]

I switched to WEN brand blades sold on the big A , one time use but 12 x80 is $21.00 .,then it’s in my recycle bin . They last 4-6 mo unless you see sparks . Cheers

[@burnstockwoodworking]

I didn't realize they made blades

[@robertsmith3518]

Happy New shop to you !!!!

[@richardmccann4815]

Any pointers on a carbide tipped blade to saw laminated copper epoxy fiberglass circuit boards? Thanks!

[@burnstockwoodworking]

Not really, that's out of my depth

[@justinbanks2380]

Is there a way to sharpen a blade yourself? And as others mentioned, before completely replacing your blade, it might just need the pitch and tar cleaned off of it.

[@burnstockwoodworking]

You can sharpen yourself though I've never done it. Great advice on cleaning

[@SzechuanChickenDog]

Definitely bummed I didn't win the laser... But I still love the damn channel. Hopefully the mofo that got the laser is as appreciative as they should be. Nothing worse than giving somebody a gift they don't use or they don't like or they aren't as appreciative as hell to get. Really happy for you being able to build a new shop Man... It's like one of those things that when I see somebody get to that level it just makes me feel proud of them for some reason so weird emotion to have for somebody you don't actually know but just something that I think moves all humanity forward, when you feel good for something good somebody else is getting.

[@burnstockwoodworking]

Excellent notion, I love seeing other people succeed!

[@CorbyQ]

Cobgratz guys.

[@burnstockwoodworking]

Thanks CorbyQ!

[@CorbyQ]

@@burnstockwoodworking of course. I’m looking forward to seeing the new shop. Gets me all warm and fuzzy

[@justinbanks2380]

With your new shop, maybe don't throw a cleaning block at the window. (At least not for a little while at least, 😂)

[@burnstockwoodworking]

I actually won't have any windows in it period 😆😆 so I'm covered on that part.

[@michaelwillson6847]

Great video m8 glad to here about what u got coming up business video will be very helpful. Congratulations to winners although gutted didnt win it could of really helped. Email me a got couple things need pick that hairy brain of yours about. 🏴󠁧󠁢󠁳󠁣󠁴󠁿👍

[@burnstockwoodworking]

Yea, thanks for being a good sportsman Michael and thank you for the continued support!

[@myhoneyshandmade1077]

If you try cutting thick wood with a fine finish blade instead of a combination blade it is so slow and forced. Don't ask me how I know!

[@burnstockwoodworking]

😆😆😆

[@lancemichael1973]

Congrats to the winners winners chicken dinners.

[@burnstockwoodworking]

Thank you!