Bush, Logik Tumble Dryer Masterclass: Disassembly & Repair Guide Everything You Need to Know

[@avgtril]

Absolutely fab video, Paul. Your comments are over the top! After extremely busy and tiring day in field, trouble with all sorts of weird accessibility to inbuilt appliances, you've made me laugh away. Thanks a million!

[@lord-zule3746]

Thanks for the guide just serviced my Bush DHB7VTDB. had a nasty grinding noise when running and the faint smell of burning checked qll component's and found the culprit a small butterfly clip stuck in the front end from on of my daughters garments. Informitive and easy to follow 👍

[@How-to-repair]

So glad it helped you @lord-zule3746 please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@theoddjobcentre6686]

​@@How-to-repairI have a Russell Hobbs and after being on its side getting moved it stinks of burning dust I turned it straight off but just wondered if it's worth doing anything with

[@conororiordan2854]

Fantastic info

[@ServicEnginner]

Cheers Paul had to take one of these apart to remove a screw and some hair clips caught in the front rim of the drum. Absolute nightmare!

[@KaGe267]

Thank you for the video! With this knowledge I will be able to fix my logik tumbler dryer in the future. Great video!

[@How-to-repair]

Hi @KaGe267 thanks a lot for your comment. It would be really helpful for me to get my video seen, as I'm no IT expert, to either share the channel or at least post it to your friends. My videos might not be KZbin superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍

[@247SH]

Great video, thanks. I replaced the NTC sensor this morning, now all is good.

[@How-to-repair]

Glad it helped you get your dryer fixed Thanks, Paul 👍 Wrinkly hands fix appliances, not algorithms! My videos might not be KZbin superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @247SH please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08

[@theoddjobcentre6686]

​@@How-to-repairWho makes the Russell Hobbs versions

[@smalik888]

Really lovely video! You know your stuff and make it very easy to follow the steps. Thank you!

[@rossi5000]

Great video, helped me replace the heating element so all good again! Thanks

[@How-to-repair]

Rossi really glad it helped you and got that dryer back up and running again What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be KZbin superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @rossi5000 please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@andrewcutajar6221]

Great video! I agree about Midea products not being so reliable, especially the LED lightbulbs! On the other hand, we have a Favorit Scirocco vented tumble dryer, built by Merloni, known as Servis in the UK. It still runs, despite being 20 years old. My grandma, has one like it, and the only fault it ever had was a lose contact on the on/off switch.

[@How-to-repair]

Servis like many old manufacturers in the UK were great companies until they started malgamating with the bigger companies than the quality seems to have gone down over the years due to manufactures no longer wanting to build a quality product. They only care about sales levels of new machines. There seems to be no concern about making things last. What makes me Laugh is the way the manufacturers tried to tell us that their environmental friendly by producing eco-wash machines, but they seem to keep quiet about their products, only lasting 5 to 7 years which means that the landfills are piling up with white goods that need to be recycled to produce the material for them to build again which is a total contradiction in what they're saying in there advertising. Planned Obsolescence: The theory of planned obsolescence suggests that manufacturers deliberately design products with shorter lifespans to encourage frequent replacements and boost sales. While not universally proven, some aspects raise concerns: Difficult repairs: Modern appliances may be designed with integrated components or limited access for repairs, making them expensive or impractical to fix, pushing consumers towards buying new ones. Environmental Impact: Shorter lifespans indeed contribute to increased electronic waste, posing a significant environmental challenge. While companies may promote eco-friendly features, the overall impact needs to be considered.

[@andrewcutajar6221]

@@How-to-repair I agree! I believe the Eco washes on washing machines, which use low temperatures, are also harmful for the machine, as limescale will build up on the spider, and will not get rinsed off, unless a 90°C cycle is carried out frequently. Moreover, the EU has made Eco design in the programming the top priority, but when it comes to right to repair, it dictates that the drum does not need to be repairable, as long as the whole tub assembly is available for a certain amount of time after sales. There is no pressure on manufacturers to encourage them to make the washing machine more repairable, such as the tub not being sealed.

[@Pete.Ty1]

👍👍👍 Auto mechanics have been fighting with these absurd designs for years. One has to remove the bumper and front of the car to change the oil filter. 😲😢

[@lorazutshi587]

Really useful video. My bush V7SDW stopped working not long after turning on. It just makes a humming noise but the drum not turning. I thought something may have burnt out as I thought I could smell something. The belt is in fine and will turn with manual help but stops on its own. From watching another video it looks like it might be the capacitor? What do you think or is there anything else I should check first?

[@How-to-repair]

It sounds like it is the capacitor easy job you just need to get access to the motor the capacitor should be next to it make sure you take a picture of the wiring before removing it as remember a capacitor has a feed in and a feed out

[@jazzyjai110]

Hi there, great video by the way, I have a Logik LVD7W18 tumble that has just stopped working. It is the end program/anti crease light on and when you press start nothing happens other than you hear two beeps. Any ideas at all. I’ve checked the following and these have tested as good, thermal cut out, thermostat and heater element. Many thanks. Jason.

[@How-to-repair]

Hi, please use our contact us page and make sure you fill out the request for what your problem is. I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. A video shoot of the problem would be perfect as well. I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍

[@DirtbergTV]

This video is great but I'm not sure how to work out what my problem is. We have a Bush td7cnbcw and it only runs for up to 10 seconds before stopping and flashing an error message. The belt is still on and the drum turns, I can't find a reset button anywhere.

[@How-to-repair]

The first thing I would check is the thermostats

[@DirtbergTV]

@@How-to-repair Thanks, I've removed the cover and can see the thermostats above the heater. Any idea how to test them? In fact I'm not sure if they're removable they're built into the heater unit

[@TheWangbolizhong]

👍👍👍

[@PedroJaimeObrien]

my hotpoint tdl30 is making a loud noise when I turn it on can you help me

[@flashman2]

Mine won't switch on no lights, fuse good

[@davedebang-bang6168]

These base design of these dryers the drum, body and filter and possibly the motor are all based on a merloni design i think, used to make the servis dryers here in the UK like the caress and eco care dryers, the one big difference is these cheap dryers do t reverse, whereas the servis dryers used to reverse properly, their drum action was more like a washing machine unlike new dryers that only seem to do one or two rotations on reverse, I had the servis eco care dryer about 25 years ago, one of the best dryers I’ve had and one of the cheapest I’ve ever had

[@davidmcintosh3026]

Unfortunately I totally agree regarding these machines I also will not work on these makes of machines horrible engineered and outrageous. Sorry for the negative response

[@Dpegg10]

If these machines reversed I wouldn’t mind picking one up

[@johnhepworth1531]

I am being driven mad by one of these, it won't start, it just beeps when you press start. Door switch is ok and I have tried another pcb. It won't respond to the child lock routine either, it beeps but the child lock indicator doesn't light up. Designed by morons these things.

[@How-to-repair]

Hi @johnhepworth1531 I will need the full model number of the identification plate and the details of your problem. Please use our contact us page and make sure you fill out the request for what your problem is. We will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks 👍

[@johnhepworth1531]

@@How-to-repair I have found the problem, it was that magnetic filter switch. It appears to be part of the front vent assembly. There is a plug going to the PCB that has two yellow wires and two white ones. The white ones are the switch, I snipped the wires and joined them together and it runs. I realised that this was the problem when I read the instructions, it says that it won't run without the filter in place.

[@danielmielnik9000]

Write off...

[@swfcnumber1wawaw69]

I refuse to work on these Chinese crap. Replaced the heater on the Bush and took ages compared to any other make even a white knight, I walk away with my sanity intact by passing on the job