Buying A BURNED Nissan GTR From Copart Salvage Auction?!

[@scraplifegarage]

Get 15% off your Carly purchase with code "ScrapLifeGarage" (auto-applied) until 31 August when you click: bit.ly/Carly_ScrapLifeGarage

[@nickwells20]

Well my man...The reason that hellkitty is much more dirty than the fire GTR is because the GTR was given a serious bath to put the flames out lol. And that's that.

[@MomedicsChannel]

The holes in the hood are from the spike of the halligan bar. It’s one the easier ways to make a gap to get water under the hood. Source; Am fireman

[@Error-5478]

"Alright guys. Turns out this engine is trashed"

[@djnone8137]

@@Error-5478 engines are cast iron and high strong aluminum. Block will be fine. They run everyday with nonstop internal explosions

[@moontruther2721]

@@djnone8137 as long as there were no leaks in the engine (oil fill cap, intake pipes, etc.) and the car wasnt running when they sprayed the water, i dont see how water could get inside an engine.

[@JonathonDelumyea]

U are correct with the fireman banging holes in the hood, buddy son called his dad and said his new Infinity was on fire on the highway, the dad said why u calling me put it out were on the way I build jet skis for a living and if you own one then u know how small the fire extinguishers are I grabbed like 5 as we were running out the shop, we saw the smoke from like 3 miles away, he was on opposite side of highway get turned around I said it's to late for these fire extinguishers, we get out sounds like really loud fire crackers going off nobody seemed alarmed my wife said sounds like gunshots, I said u get your gun out the car he said first thing he got I said u have Xtra bullets in car he said of shit 2 full boxes in trunk, this 2023 infinity sedan was burning down 800 miles on it, those fireman truly put in work putting holes in this brand new car and u csn tell they enjoyed it then shoved hose in it, they came over asked for key fob he gave it to them we watched them literally cut the engine harness with bolt cutters, they cut everything broke out the small window I asked why he said to shove hose in there so we can flood it so it won't re ignite, aftermarket sub caught on fire

[@michaeldyer6304]

Absolutely ANY Corvette or Porsche rebuild on your channel... Will always watch the build.

[@Brewshoots]

If you try the q50 vr30 swap keep in mind that you can’t control the throttle bodies so there will always be a lag in throttle response you’re also limited to ecutek as a tuning solution.

[@713.Bullitt]

And the Mach 1 comes with GT500/350 suspension and comes with coolers, and it comes with the GT350 mani and intake like the Bullitt.

[@gibby3820]

huge trans upgrade over the m6 GT as as well

[@jjzaragoza6389]

6MT is a tremec not the shitty mt82

[@keithczerniawski]

True that is the other thing that people really looked forward to as an option if you don’t go for the 10 speed automatic then you get the same tremec 6 speed in the gt350 which is a solid base to start with on that car paired with a whipple from Kong Performance you’d have yourself a sick street car

[@DecioBarreto-j3u]

Austin's haircut looks great!

[@darrenmahabir6510]

Finally he looks like human 😅

[@russelbarns1737]

great video guys, the trips to the auction lots are always great to see....keep them coming 👍

[@Bushido_90]

Love your vids, crazy how some cars can be brought back from the brink of death! Just a word of caution to those who are feeling inspired and thinking about buying wrecked burnt cars to restore and/or part out, when handling burnt cars you want to be mindful when it comes to burnt carbon fibre/fibre glass. That dust and ash extremely unhealthy, some would even compare it to asbestos in terms of health hazard so... Might not want to go poking around in those wrecks too much, and be especially careful and wear adequate protection when you tear into the car itself and clean it out/rebuild. Stay safe y'all!

[@matthewmartin9067]

Been waiting soooo long love when you guys go to the scrapyards 🔥🔥🔥🔥

[@steelwheels327]

I like when you go to Copart and give your opinions...good info! You did a lot of Vettes already ,but it looks like a strong option . Why can't you put the GTR motor in the Juke instead that might be cool

[@2seep]

Gotta change that cvt too. The vr38 deserves a good host.

[@iTrinityPlays]

A manual or sequential at that also.@@2seep

[@ericsherwood7423]

Nissan made a prototype Juke with a current GTR drivetrain, and suspension if memory serves. It was apparently a wild ride due to the short wheelbase.

[@dirty2jz283]

2017 gtr comes with a titanium exhaust from factory, Visconti parts are good parts, Boost logic titanium exhaust is about $4500, Visconti fuel rails probably has Visconti fuel kit. I see the Zextronix content analyzer for ethanol content. Visconti fuel kit runs from front passenger to the rear. Visconti pumps are right underneath the passenger side back seat. Uses stock fuel basket.

[@dirty2jz283]

Forgot to mention he ran 10s on his personal vr30 q50.

[@triggersnob9722]

New beemer has a face only a mother can love lol

[@tyronebiggims1613]

That was my car. the amp and speakers shorted out and caused fire. the rear damage was done a few weeks before and was waiting on insurance check.

[@713.Bullitt]

The G80 Makes 520 and with a down pipe and E70 it makes 717-720whp

[@nickadkins7765]

He don't know about that S58 lol

[@Bestwick1983]

The fact that he implied that the M2 and M3 have the same motor should tell you all you need to know

[@joshslagle8620]

the damage on the hood of the GTR looks like it was done with a halligan bar by the fire department. they probubly used the bar to make a opening to spray water in the engine compartment.

[@Daerc_]

The new M3 (G80) had the S58 which with a downpipe and tune can make 700whp

[@hellfire08]

6:05 lambda isn’t a pressure sensor.. 😂

[@Rick_B52]

VR30s with E85 tunes and a few supporting mods will make over 450whp 500wtq. That Juke would be a blast. Check AMS perf in Illinois.

[@MrJuly151995]

I'm praying for y'all, especially Chris. Hope to see y'all on the 24th. Togs this time, getting there on the 23 and taking time to enjoy the trip. Next year, will have our 220k mile wrangler down there.

[@christian6381]

That c7 is perfectly fine😂

[@2seep]

Fixing the frame will be a hassle

[@Chief_5]

Yeah, it’ll buff right out. 😄

[@jamesmcclain2125]

The Nissan Juke with the GTR drivetrain. Something that will put a smile on your face as you pull away from a Hell Cat :)

[@Bestwick1983]

Wow. You really know sweet FA about either of those BMW's

[@bimmerboi_hutch]

surprised m3 totalled, def had to be bc of the carbon ceramic brakes. m2 and m3 have different engines but only bc of the different generations. that new m3 has the s58 and is a VERY fast car. closer to 550hp but runs with 700hp cars all day.

[@downshift83]

g80's with downpipes and tune...750 WHP

[@ThePOTHOPPER]

Maybe try dry ice blasting on the exhaust

[@Eatongee]

It's not the engine in the Juke, it's what's outside the engine that we roast you for. 🤣🤣

[@dzgaming1]

The C7 is a beast without a doubt.. but I would never try to repair a car that far done.

[@davidbritt6676]

Haircut and beard trim on point!

[@tyronebiggims1613]

the motor has a slight wrist pin noice or tap.

[@rodrigopalazzo552]

Man, o bought this Car 😅 can you pass me the infos about it? Bought to make a drag Car

[@oncerunts1913]

Awesome car vid for my day off! yall never dissapoint

[@matthewmartin9067]

GTR motor in the Juke is a MUST please make this happen guys

[@costasgeorgiou5015]

The front tires could be something of a halfasser builder hints why the fire! 😝 26:41

[@concernedcitizen2868]

i don't care what you do bro's, just happy to have a good video watch. i hope you both have a good day. stay safe

[@vxracing380]

By far my favourite KZbinrs!

[@kickit59]

The black Corvette near the end of the video would be the smart rebuild play! Less risk! I would like to see how you would rebuild that Mach 1. You could hold it until you could find a theft stripped Mustang body. And do like you guys did with the Boss 302 body swap. Or you could get a totally destroyed in the front Mustang and use the back half to back half this Mach 1 rebuild. It would be interesting!

[@dogme93216]

Please please please make more videos of the Dodge Challenger demon we want to see it back on the road

[@paulmarion5981]

I could never do a build can’t afford anything like that unfortunately but you guys are amazing keep up the great work the demon will be awesome when it’s done and screaming down the street 👍👍

[@justeagle1_]

2:20 i could probably fix that corvette for like 6 bucks in my uncles garage.🙃

[@mike_0213]

I was going to buy the Carly OBD2 reader but you need to sign up and pay for a membership to use all the features. I think it will only read engine codes without a membership. Now that is not bad I guess but I did some research and settled on the Blue-Driver one. It's about $100 and you get everything without paying any extra fees. Just a tip for anyone looking to buy one of these. Now if you have the money to spend, I am sure Carly is better, but if you don't have the money then look around.

[@Slowmo896]

That would be a pretty darn good car to rebuild..AS A VETTKART..I’d take it on ,now I wouldn’t attempt to fix it back to stock,but it would give someone yrs of fun..

[@orrislea6219]

Love the 280!

[@cleemungo]

Please do that swap in the juke. It'll be cool to see.

[@adamstacharowski5231]

“That’s half a quad and I squat 135lbs” 😂😂😂

[@BiggPoppa1914]

Wait Dalton cut his hair! LOL

[@nickwells20]

Happy to see you back at the beginning content i started with on this channel...looking at destruction lol

[@darrellbrixey5341]

Thank you for sharing this awesome content

[@philipshaffer401]

Mach 1 is sought after for the handling pack . Plus it's all the gt350 handling parts on it even the base mach 1

[@bigdragracehybrid]

@scraplifedalt I like your cut, g! 😂🤣👍🏾👍🏾

[@scraplifedalt]

😎😎

[@The_Perfect.1]

I haven't followed you for a long time but where has the demon project gone?

[@SoldierNika]

Personally, I'd buy that wide body charger. Not for such as. Well. Cause it's a hellcat, it's because I want the drivetrain. To put into a 66 Charger. And then attempt to integrate a few items from the wide body charger into the 66 charger. Maybe like the widebody flares. And the seats, at least for the front. The back seats I'd keep stock. Depending on if it was a restoration, if I was restoring a 66 charger, almost everything from the widebody hellcat would go into the 66 charger. Utilizing as much as I can, making it kinda modern while keeping it old school

[@bretjjjohnson7942]

They probably pulled the radio to disable the OnStar so it couldn't be tracked

[@kylechristian3277]

Dodge doesn’t have onstar…

[@bretjjjohnson7942]

@@kylechristian3277 uconnect or whatever the f**k it's called

[@Level_Up_Nation]

I am looking for a GR Corolla engine, are those hitting the yards yet? Nothing like a 3 cylinder putting out 365hp

[@justeagle1_]

2:20 i could probably fix that corvette for like 6 bucks in my uncles garage.

[@robertbonesio5498]

Wide body, just gut the inside. Get a new interior, wiring harness and clean it up. Probably less than $8000. Yes the Corvette all day long.

[@jesuscota2322]

❤ excelente proyecto 😍 ya esperamos ver pronto el demon 🎉

[@mikeyy1011]

All these nice cars in scrapyards reiterates that some ppl shouldn't be driving

[@jakbmx200]

as much as you like your 911s y’all should definitely hop into that g80 lol

[@wokekidd]

Brother, you obviously don’t know the stock m3 engine can hold 900whp 😂😂

[@QuintDavis-wp7ld]

so no demon update?

[@karensavarese5684]

Eazy fix C6, build challenge ,LS powered z car. For me, no doubt the vette all the way. Built first theft recovery vette in 1965, so there!! Izzy Strong,,,

[@JasonMcCord-qk3yb]

Oh yes! Buy the black C6! I would love to see you bring back another one!

[@kickit59]

The Mach One would be a great candidate to back half!

[@JuanRuiz-po3bi]

do it bro, I have a Juke, I love driving it, my baby bat mobile, lol

[@JuanRuiz-po3bi]

@Scraplifegarage-_ yours, it’s already a Godzilla maybe that GTR engine

[@pohjunhao6341]

16:40 fairlady z31 wangan midnight= devil z

[@rast4man]

I wish I could have bought that GTR! That would have been my dream project!

[@davinej]

where’s the demon

[@jonsmith6982]

holly cow that's a serious amount of cars ,gee that's more damaged cars than we have road going ones here in NZ if i lived in the usa i would be a salvage truck owner it doesn't appear to be any shortage of work there ..

[@loneric550]

M2 buy & fix that all day bought one last year similar damage turned out to be the perfect ride I daily drive it everyday!

[@rafaturbo75]

In front of tne Mach 1 Mustang is the burned 280z that Gas Monkey did, minute 12:04

[@MrHalfdef]

Watching from Trinidad and Tobago 🇹🇹

[@terrybaptist795]

I know that R34 is still Grey market import banned. But I am hoping maybe some you will do R34 GTR Skyline build?

[@terrybaptist795]

If this is a shouting match. Then i no intrest in talking to you?

[@cfwebdeveloper]

Love the new hair cut Mach1 with the perf/handling packages are the only ones worth getting honestly.

[@northwestmountainbikeaddic6874]

That m2 is sick!

[@northwestmountainbikeaddic6874]

@scraplifegarage_- Ok let’s talk

[@szavant8558]

Love these shopping videos.

[@htahana3461]

The mach 1 mustang is worth saving, great video cheers from gold coast Australia 🇦🇺

[@mik3ymomo]

Dont forget the BMW hood release is a double pull.

[@christian6381]

Not even a BMW guy and was yelling at my screen 😂

[@tossingchairs4460]

Mach one or the charger

[@nickneely4999]

I would love to see that Infiniti drivetrain get swapped into the Juke.

[@RipRoaringGarage]

Get that 15k mile Vette. Though that looks like plenty of driveway builders will be bidding. Its beautiful and truly an easy fix. But, Juke Box Hero should get the GTR and just do that swap. Quit messing about, and make it a real baby GTR, unless you cant handle da powr! lol. You guys do good work, not always my speed, but still great stuff.

[@tannorbrooks8402]

I’d get it as a Burnout car if you could get it cheap enough and just fix the suspension leave it the way it is get a cooler for the trunk it’d make a great burnout car could be a Leroy 2.0 for Cleetus

[@seanhenley3428]

GTR 100%

[@GURIsnake]

Is it twin turbo or supercharger

[@TheMsr47gaming]

I already got a foxbody but a gtr does not sound bad.

[@Slowmo896]

I’d buy the corvette and buy a sweet vett kart..so hey can you build one ,and then sell it to me, im a DVET I’m crippled ,from chest down, and would love to have a vett I could get into with a lift..

[@johnnixon-fe4os]

Awesome video guys

[@rtstef6836]

37:40 , is that a street speed reference ?

[@scraplifegarage]

😎

[@bluu3393]

That vr30 swap would be awesome

[@Gr1MM240]

to start a bmw after an accident you need to reconnect the positive battery cable.

[@christian6381]

Dalt needs to make a DIY Juke R

[@jamarmurray406]

Swap the juke so I can still make fun of you.

[@2alawabidingcitzen]

4:54 I would drop that drive train in a 99 camaro SS

[@RoKCRWLR]

Sorry I'm late to the game but that stab at Pennsylvania was prefect lol

[@ChristianHansen-y5p]

Biggest difference in the mach one is if it’s the manual it has a tremic instead of the mt-82

[@jesselaporte7184]

Mom bought a brand new 240z off the lot in 1971 for $5,300.00 CDN. Twas my first car and what taught me manual.

[@gibco25-offical56]

Gtr or the m2 would be good builds

[@abelotk2437]

the vr30 platform is huge rn ,if you do the swap your video is going to be poping

[@Slebonson]

LS3!!! and the Juke swap!

[@jeremyvandussen8596]

Can't wait to see what we could come up with ....🎉

[@jeremyvandussen8596]

@Scraplifegarage-_ how

[@PRIME_HUNTER-001]

You should get the GT-R for the motor and trans for a older 99 GT-T swap.And do the Rustang or SRT for a rebuild

[@Slowmo896]

Ok I’m just floored that so many ppl really sit around and watch videos of crashed cars, wow and I was thinking too many ppl must not have a life, then I realized I’m talking about myself too, lol.