BUYING CLAPPED OUT JET SKIS OFF MARKETPLACE, SITTING FOR YEARS, WILL THEY RUN? ( Part 1 )

[@davidm7824]

You can buy repair manuals for these jet skis. I bought one for mine and it saved me a lot of money from having the dealer repair it. The manual shows how to check and repair everything on it, even how to rebuild the engine. Well worth the price to buy one.

[@TheHomePros6221]

thanks I’ll get one

[@oldkoot5828]

Where can i buy one for a 2000 seadoo bombadeir gtx?

[@SkiPutt]

@@oldkoot5828 they’re free online! Just search your model and there’s a website with all of them

[@Cruz392]

@@oldkoot5828google

[@thomaspaccione7214]

The Seadoo has 3 2 stroke oil lines, one small one to each carb intake and one large one that goes to the bottom of the block. If you are going to premix the gas, you may not be getting enough oil into the bottom end. Engine may not run for long. Best bet is to restore the origional oil system. Good luck with them, they cleaned up nice

[@TheHomePros6221]

very very good info!! thank u soo much!!

[@zakiramjan9822]

so glad i came across this comment.

[@makinawake9178]

Haven't ever owned or worked on jetski stuff but rebuilt car engines and I really enjoyed this thanks so much for the effort. 👍

[@TheHomePros6221]

Thanks for watching I appreciate it my friend!!

[@SS-lk2gt]

I will tell you the early Seadoo and Yamaha's were notorious for the Honeycomb/aka resinator fails and when they do it restricts flow through the exhaust, they sell what is called a D-Plate which eliminates that resinator but still allows back pressure, just keep that in mind

[@TheHomePros6221]

That’s really good to know I plan on rebuilding them I’ll check it out

[@bloodbushcraft2467]

I don't have a jet ski and I never have but I'm putting that tip in my back pocket for when I find a great deal on some

[@papadonjetski9535]

Really good video. Hope this means you will look for other nonrunning jet skis and make more videos just like this. I love seeing old skis come to life after being considered junk. Last year I bought a 2001 Yamaha XL800 for just $350, rebuilt it for next to nothing and it is my family's favorite.

[@TheHomePros6221]

thank you so much means a lot!!! I think I’m going to do a fresh top end job on both so I mite make a video on that and actually get some good riding video also, thanks for watching

[@ryanbuckner2405]

You are the man Papa Don! I just bought a 2003 sea doo gti that actually runs great, but I know I’ll have to tinker with it. Your video on whether or not to buy an old 2 stroke helped me decide to get it.

[@TheHomePros6221]

@@ryanbuckner2405 yea don good work on the skis on your vids

[@ni_wink84]

That was a really good video, you tracked down a lot of issues was nice to see em back out on the water and running well! Great job on getting those old skis out there again

[@TheHomePros6221]

Thank u very much nick!!😊

[@alex3012red]

had a pair of the gtx's 97's they are a blast to ride and bullet proof, just go keep carbs clean and ou good to ride

[@TheHomePros6221]

Yes sir I had a gti they were a blast

[@davesworkshop2714]

What a beautiful looking place! Nice being by the water! Great that you got the dash going so easily!

[@TheHomePros6221]

Thanks Dave I appreciate that, yea I couldn’t beleive it when it worked. Looking foreward to seeing your upcoming projects

[@ferddoes1498]

We got to work on your definition of clapped out, those are way newer and nicer then most skis I pick up. I need to see grass growing inside of it and mold for days !!

[@TheHomePros6221]

yea I hear ya, I think the Yamaha mite need a rebuild and the gtx prob could to, I know it needs a wear ring and prob more carb work along with a dash

[@james94582]

Think it's awesome to see old skis brought back to life... Wish I had the time and money to snag some old ones up, and get em running and pass the savings on to someone who can then take em out and enjoy em... Look forward to seeing more on these and other projects

[@TheHomePros6221]

thank you James!! I’m working on part2 now both skis have major engine damage that im fixin

[@chrisgaffney7265]

You have to unplug the lanyard and then back in to get the screen up , or press start . It times out , normal

[@TheHomePros6221]

trust me I tried that and a million other things

[@DeltaDJ2006]

How in the hell do you remember where everything goes back blows my mind

[@TheHomePros6221]

good question lol I try to stay organized and keep bolts in separated piles, recording stuff helps if u can’t remember

[@jbarzee0001]

I’ve got almost the same set. 97 sea doo gtx and a 2001 xl700 the Yamaha runs like a dream the gtx always needs repairs. I also have the shop manuals as a pdf if you need them.

[@TheHomePros6221]

that’s awesome!! I’m rebuilding both engines rite now and making a part 2. if it’s not a bother and u wanna send me the manuals my email is [e-mail] thanks man!!

[@gt1man931]

You can usually tell the usage by the upholstery, the seats get worn and tattered before anything else. Both of those seats looks really nice for their years.

[@TheHomePros6221]

very good observation!!

[@jayshustlegame9740]

For future refrence the yamaha gauges are supposed to do exactly what they are doing , because they do not have a battery switch or key etc , when you crank it turns it on , when motors off it goes into sleep mode

[@TheHomePros6221]

mine wasn’t cranking at all with the switch, the dash has what’s called a pass lock system and it’s common to go bad so the start button won’t work, once I swapped the wires I bypassed the pass lock and now the switch works along with the gauges and everything works like factory and still has the security code.

[@seangreene64]

@@TheHomePros6221 I think by bypassing the security lock the engine will start , but it will stay in limp mode.

[@SeaDooEric]

For the Yamaha, adjust the idle in the water after it is warmed up. Also the display is operating normally, once you turn off the ski the display shuts down pretty quickly. Good move keeping the oil injection, the pumps never fail, just the lines

[@TheHomePros6221]

Thanks for the tips, the dash wasn’t working correctly at first the start button didn’t work either but I fixed it at the end of the video

[@Yamacati]

Premix never fails 👍

[@TheHomePros6221]

@@Yamacati u are correct

[@cwatson42785]

I beg to differ on keeping the oil injection. #1 failure on 2 stroke skis is that oil injection failing and you would never know. My reasoning is why even take that chance even if it's small. Like guy above said, premix never fails!

[@TheHomePros6221]

@@cwatson42785 u can’t go wrong with premix!!

[@headinghome8914]

I've got a 98 gtx ltd in pristine shape...after a rebuild its super fun...Def built to go fast....the faster you go the more stable they feel..

[@TheHomePros6221]

that’s awesome man!! I had a similar gti back in the day also

[@headinghome8914]

@@TheHomePros6221 for sure...I put a black aftermarket seat on mine...and I swear it made the ski more comfortable but it also looks ten years newer...just food for thought for use or resale

[@TheHomePros6221]

@@headinghome8914 it could use a new one black would look good to

[@brendanhayes2752]

Great channel, you give allot of info and make it easy to understand.

[@TheHomePros6221]

I appreciate that! thank u soo much!!

[@flyingwithsol]

10:41 Noooo legit the troubleshooting is the best part!!

[@TheHomePros6221]

check out my other videos on these I end up completely rebuild them

[@flyingwithsol]

@@TheHomePros6221 yeah nearly finished the third one. Loving it. I was wanting to buy a blown motor ski myself and do this too. #inspiration But first I have to finish rebuilding the motor on the “project” bike I bought a year ago lol

[@TheHomePros6221]

@@flyingwithsol that’s so awesome thank u soo much it means a lot🙂

[@askikr79]

That Large oil line on the sea doo lubes the rotary valve. You need to make sure to keep it full and check it every few rides. Dont think it uses a bunch of oil

[@TheHomePros6221]

Thanks for the tips! I really appreciate it

[@bikerboy674]

1. That gas was pre mixed. You should have seen it when started. That thing smoked white 2. 90 psi is not that much, but can be stuck piston ring.

[@TheHomePros6221]

yea it may have been mixed but I wanted fresh stuff

[@vinci.visuals]

Dash issue isn’t an issue. Working as it should from my understanding. Great work!

[@TheHomePros6221]

thanks man!! the dash wasn’t working neither was the start switch after I bypassed the pass lock it all worked like it should 😊

[@harryburford6629]

what time is it there it is 20 to 4 in the afternoon in new zealand i find it interesting that kind of thing

[@TheHomePros6221]

rite now it is 12:02 at night bout time for me to go to sleep lol

[@TheHomePros6221]

WANT TO THANK EVERYONE WHO FOUGHT FOR OUR COUNTRY AND MADE IT POSSIBLE TO ENJOY THE FREEDOMS WE HAVE TODAY, THANK YOU AND HAPPY FOURTH OF JULY EVERYONE!!! 🇺🇸💪

[@NilsKall]

Happy 4th!

[@TheHomePros6221]

@@NilsKall thanks nils!!

[@r2d2326]

That Yamaha xl800 was a score! Having trunk and frunk bins included is a little rare these days too! Just chiming in my .02. Not sure if its been mentioned but The dash only turns on when cranking and running and shuts off 10 seconds after stopped. Theres also an hour meter built in there too. One thing I didn’t notice in the vid, but if you crank the ski and don’t allow it to start, the power valve actuator should cycle a full open close stroke to clean the valve. I don’t think that unit has a catalytic converter, if it does, its pretty standard practice these days to remove it and install a cat delete plate (D-plate) also, if the previous owner has not done so, I highly recommend getting a set of Wave eater brand power valve clips. Takes out the slop and makes it impossible to drop a valve into the motor from the linkage walking off. Other than that, the 800s are considered pretty durable and she’ll sell quick if you’re flipping it. Other than that, check out the “Yamaha wave runner 2 stroke” group on FB. Tons of great helpful people there who are very knowledgeable. Enjoy the ski! See ya on the water!

[@movingearth3726]

Het a new wear ring for the gtx

[@TheHomePros6221]

@Zyxalis thank u sooo much for all of the info!!! Yes later in the vid I got the dash working it shows 102 hrs the power valves cycle smoothly but will get some clips, im gonna do a topend rebuild also, I don’t think this one has a cat

[@fridder.]

Not sure if this was mentioned yet, but I had the same model (04 xlt 1200), and the dash turns on when you hit the start button, then turns off a few seconds after turning the motor off. If the motor is off, it normally won't stay on past a few seconds.

[@TheHomePros6221]

yes I know this but mine wouldn’t start or anything it’s a very common problem

[@floridafamily3796]

If the wave runner 800 is similar to my 760 there is a blue wire connection under the front storage bin that when you disconnect it and reset the code should enable the dash I believe. Once the ski is running you can plug the blue wire connector back together.

[@TheHomePros6221]

I already did that it’s how u test the dash

[@rafaelramirez4371]

Nice to see abandoned jets keys come back to life again enjoy them 👍

[@TheHomePros6221]

😊thank u very much

[@arielmanto1]

What diameter hose did you use and model, brand? thanks good job

[@TheHomePros6221]

it was off ebay I can’t remember but I think I used 1/4” for the fuel lines here is the link you will need different sizes for oil lines..ect but this is the best fuel hose I’ve used - www.ebay.com/itm/132891803793

[@arielmanto1]

@@TheHomePros6221 thanksss !!

[@gordonagent7037]

Gidday Darrell, just found your channel and love the content, visuals and narrative of your videos, so decided to subscribe and come along for the ride. I see you have quite a few videos so will be binging a bit to get a feel for your work. Well done anyway mate, great skills

[@TheHomePros6221]

Thank you so much Gordon!! That really means a lot to me I really appreciate people like you thanks again my friend!!

[@HeavyHookSet14]

I'm glad I cam across your video. I have a question, on the gtx after you put the carb back in noticed when you try to start it would just "thud" any idea why it's doing that? Getting my ass kicked on a 97 gtx, hard to crank especially with both plugs in

[@TheHomePros6221]

thank you!! well it could be a couple of things, solenoid could be bad, starter motor could be bad, it could be getting flooded very quick so make sure carb isn’t leaking and is set correctly, could be somthing internal like a bent rod also

[@chewiepac5932]

Sounds like you got a cracked Reed, oil injection is only a lil bit of a spurt, but if you delete it you save a few pounds, if you pull carbs on any 2 stroke, you should also be pulling and inspecting the Reeds and Reed cage as well since it's only a few more bolts to rem9ve since it's right behind the carb

[@TheHomePros6221]

That could be possible! I should have checked it

[@villagelightsmith4375]

Tip from the saltwater marine electronics people: put a little bit of pure lanolin (AKA: dielectric grease) on both sides of every connection to stop corrosion. It'll save a lot of grief later on.

[@TheHomePros6221]

great tip thanks!!

[@buster5638]

Fairly certain these are our jet skis. We sold them about 5-6 years ago and they came from Houston, Texas.

[@TheHomePros6221]

They guy I got them from said he bought them new but I’m curious do u still happen to have the vin numbers? And I can check them?

[@Alec9821]

I think something is broken between the battery and the low amp starting circuit, I would trace the positive from the battery through the low amp wires until you come to a break. The dash comes on bc the stator is powering it while charging the battery.

[@TheHomePros6221]

I checked every wire, the dash is common to go out like this, I did get it working, check out my other vids on them

[@CSWmanofsteel]

We’re praying for you to have a complete healing ❤️‍🩹👍🏼

[@TheHomePros6221]

thank you so much I really need it 😔

[@markbailey9733]

Hey I’m rebuilding a 1998 seadoo gtx . I’d LOVE your input on a issue. I replaced the battery and a fuse got it to crank but won’t fully turnover . It did sit outside covered last winter. I was thinking or replacing the carbs.

[@TheHomePros6221]

Carbs are prob ok, if it’s not turning over then sounds like piston or somthing messed up in the engine, or maybe even starter

[@robertrabhudsonhornet5869]

If you connect water hose to your flush adapter you fest start the engine for 5 second's then turn on water when your dune turn off water first then turn off the engine . You never want to put water in to your jet ski if the engine is not running first if you do it will damage your jet ski. I see on line 15 second's max with no water going to the jet ski I hope this helps some good luck on them

[@TheHomePros6221]

yes you are correct!

[@NilsKall]

Alright now I have seen the whole video, good one as usual. What is a wear ring? Good that you found that solution with the dash! Stay safe!

[@TheHomePros6221]

Thanks a bunch my friend!! A wear ring is a ring around the propeller that wears from sand and normal usage it will cause cavatation when worn

[@derikwright3383]

You will enjoy every mile on that craft knowing you fixed it yourself

[@TheHomePros6221]

yes it really makes you appreciate it more!!

[@anthonyaneke7084]

how did u adjust the idle?? i thought it was under the airbox

[@TheHomePros6221]

it’s on the carbs u tighten the cable

[@ronaldjtriumph5985]

Loved the Andrew Camerata name drop there 🤗

[@TheHomePros6221]

Haha thanks brother

[@noahenglert]

you don't have a wire cutter... but you have an entire soldering kit

[@mickotoole4795]

Did ya make another video on the yamaha and seadoo

[@TheHomePros6221]

I’m in the process of making part 2 now, rebuilding the engines

[@mickotoole4795]

@@TheHomePros6221 very interesting can't wait your video was so good attension to detail 👍👍👍

[@TheHomePros6221]

@@mickotoole4795 thank u very much mick!!

[@Checkthefineprint]

You da man, what a troubleshooting genius!

[@TheHomePros6221]

Thank u so much brother

[@russkielol]

Man I told myself I would never get another carb anything anymore 😂 I am glad you made it work!!!!

[@TheHomePros6221]

haha thank u brother!!

[@NilsKall]

Almost 8k subscribers! One of my favorite A.C videos is about waverunners and I don’t even like being out on the water! Have to sleep now but will watch the whole video tomorrow.

[@TheHomePros6221]

Yeah I loved his videos on them also, I really wanted to get more video riding them to the dam and other areas but they aren’t registered yet, video was getting long and I wanted to get the vid out on the 4th I’m kinda upset I didn’t include riding and drone footage

[@NilsKall]

@@TheHomePros6221 I think you made a good decision, people are off and have time to watch their favorite KZbiners (🍺)

[@TheHomePros6221]

haha thanks nils

[@fitbikeco711]

Great video. Keep em coming

[@TheHomePros6221]

thanks man I really appreciate it

[@johnhicks9529]

Those jet skis look familiar to me to. Did you get them out of Bainbridge,georgia by chance.

[@TheHomePros6221]

no I did get them in Alabama though

[@crookedman9780]

I’ve seen them on marketplace. Lol I was gone say bama but, here I found your comment that says so. Good video. I’m on the lake just about every weekend at Lake Martin with mines

[@TheHomePros6221]

@@crookedman9780 I actually bought these years ago but they have been stored at my parents house and now I’m finally fixing them

[@cameroncarlile6203]

Where did you get the rebuild kit for the gtx??

[@TheHomePros6221]

I bought a new sleeve off ebay and put it in myself and had it bored at a machine shop to fit new piston. however there are rebuild kits on eBay you can buy

[@oldkoot5828]

What is the premix on that fuel to oil? Is it 50 to 1?

[@TheHomePros6221]

I honestly can’t remember I think it’s 50:1 tho

[@ShadetreeJetski]

Thanks for the mention. If I had 90 psi in one cylinder and 120 in the other I would at least swap rings out. Glad you figured out that bad dash.

[@TheHomePros6221]

Yea man I was really thinking the same thing I’m prob gonna tear it down and see the condition of the cylinders and go from there, if the nikasil is damaged I’ll send em off like u did and I think it’s running lean from the o rings in the fuel sender

[@moto1p1]

My Dad has that Yamaha 800XL I don't want to get your hopes up, but it was clapped out when it was brand new :( On the bright side, from the impression gleaned from several of the played out tricks seen bare backing the poor ole XL odds are it has contracted the clap as well!

[@TheHomePros6221]

Lol check out my other vids on it if u want I cure it if it’s clap

[@justinsnyder6256]

I do belive those zipties for the oil injection need to be a certain thickness to pinch the line. It seems like a crap design but it works well and usually the lines get hard and need replaced before zipties.

[@TheHomePros6221]

They should have use a metal crimp clamp, Yamaha is notorious for low hour engines like this one being ruined due to crappy lines and zip ties

[@craigdreisbach5956]

Great video. Even though you had the Mikuni parts breakdown, I doubt you needed it as you have such intuitive skills. Were you tempted to fix the Seadoo oil injection pump? What do you do with the old gas? Some run it thru a coffee filter and use it in their fuel injected cars. That makes me nervous. I have no place that recycles old gas. Kind Regards, Craig

[@TheHomePros6221]

Thanks man yea I didn’t really need it but it’s cool they included it, I wanted to fix the oil inj on the sea doo put previous owner removed the oil tank and some parts 🤷. I usually mix in the old gas with a lot of fresh gas and dilute it and run it in cars like u stated, gas is to expensive to throw away unless it is just to far gone

[@andyclarke3895]

I have used old gas in my lawn mower, when I have restored old cars/bikes with old fuel in them. £100 lawn mower doesn't care!

[@TheHomePros6221]

@@andyclarke3895 yes I also use it in mowers as long as it doesn’t have junk in it

[@rainorshine6702]

on tractors there is a ecm or computer chip...usual flat brake pad looking shape with wires going to it on bottom or edge of engine...sometimes under dash and causes your issue

[@TheHomePros6221]

I fixed the problem later in the vid, thanks for the info

[@kenfrazier616]

seadoo mine when it starts acting up replace solenoid for some reason it fails just like that, every connection cleaned and inspected circuit many times and just replacing it solved the troubles

[@TheHomePros6221]

Thank u so much I was thinking the same thing!🙂

[@kenfrazier616]

@@TheHomePros6221 ya it cured my issues and it was outrageous to buy and no problems after it

[@TheHomePros6221]

@@kenfrazier616 that’s awesome man

[@optionprinting826]

Just showing support, love the channel !

[@TheHomePros6221]

Thank u soo much!!

[@brianmike285]

Just saw your video i herd you mention Jet works over in Alabama made you a key the guy that did it was his name Chad if so, he is a good friend of mine.

[@TheHomePros6221]

I think that was his name, he was the owner, I kept asking him to sell me his kubota lawn tractor lol

[@PiazzaWoodWorks]

Epic man can’t wait to see you get these back to a1

[@TheHomePros6221]

Thank u very much man I really appreciate it!!

[@TheStephenspann27]

The 800 yamaha sounds like it has a broken skirt or bad rod/wrist pin bearing

[@TheHomePros6221]

I think I’m going to do a top end just to do it anyway

[@soumyadastidar8732]

My yamaha that I just completely rebulit is the exact same as yours it's a 2000 yamaha xl800, and mine sounded the exact same as yours. I have good compression since everything is brand new but that's just how thease 800 motors sound honestly. A new top end and you'll have a blast on the yamaha

[@TheHomePros6221]

yes sir, do u kno a good place to get a new top end?

[@allensnook7760]

Heck yes i wanna see part two ive got a jet ski a 98 yamaha 650vxr it was running good but has wierd issue with fuel turns right ok but left hand turns wants to cut out believe its something in fuel delivery.that and a small water hose popped off going to heads and went into limp mode,i rehooked it up now ok,wish someone could explain water sucking routing on these machines.snooky pa.

[@TheHomePros6221]

hey Allen check out my other vids on these if u want🙂🙂 thanks brother

[@fishingchallenged3056]

Short on start button. 12v isn't going to Soleniod coil or coil is burnt and shorting. This would explain dim dash, Soleniod not activating, and start button not working. I think anyways

[@TheHomePros6221]

The solenoid is bad on the Sea-Doo the Yamaha works perfect now

[@PAUL-1961.]

awsome video,hope to see more love your stuff

[@TheHomePros6221]

Thanks Paul I really appreciate that!

[@mikeparker7243]

never run it without those oil lines hooked up! Unless your premixing your gas. Ours are on 50:1 premix. I got a block-off plate for ours. The dash is typical. Won't be on unless your putting your code in or the engine is running. Other than that its always off. Oil injection is proportional to engine rpm. More oil will come out at higher rpms. Very good design. People that have had issues, don't maintain their oil system like they should. Ours have replacement engines and it calls for premix instead of using oil injection for whatever reason.

[@TheHomePros6221]

I never ran it without the lines connected, if I did I put the oil in the gas and premixed it

[@southernhomesteadtransformatio]

Nice buy and Great job getting them back to action!....You'll have to bring them here to Gunner Lake and we can sell tickets and do a stunt show 😁😎

[@TheHomePros6221]

Thank you so much brother!!! Hahahah yea that would be awesome

[@southernhomesteadtransformatio]

For sure 😁

[@harryburford6629]

well done sir, are you a semi trained mechanic,. any way great video alot of work but so worth it in the end cool.

[@TheHomePros6221]

thank u very much Harry I’m glad u checked out the vid I really appreciate it!!

[@billlloyd9142]

Great job getting them running Darrell !

[@TheHomePros6221]

Thanks bill!! I appreciate it very much

[@randie450]

Great project thanks for sharing. Listening to it run i think you can hear one cylinder is a bit rattley.

[@TheHomePros6221]

thank u so much and yes I think your rite I plan on doing a new top end rebuild

[@krampp24]

The whole dash thing on the yamaha is normal the dash wont come on untill you hit the start button or on some untill the engine is acually running

[@TheHomePros6221]

I tried that numerous times many different ways, this is a common problem on these dashes

[@CSWmanofsteel]

Oven cleaner is also a good engine degreaser and a lot cheaper 😁👍🏼. I saw it being used on another channel a guy was working on his dozer

[@TheHomePros6221]

oh yea I’ve used it it works great

[@UrbanFisherman]

nice job 👍🏾

[@TheHomePros6221]

thank u!! part 2 coming out shortly

[@JayDee-xj9lu]

Great stuff. So in the end what is the easiest to work on and the simplest? Also do you prefer two stroke or four? And what brand do you like best. Thanks.

[@TheHomePros6221]

I like the Yamaha because it’s newer/cleaner..ect but I do like the newer seadoos that are 4 stroke, I actually plan on maybe selling these and getting a four stroke they are way more reliable

[@NilsKall]

Working and filming in that tight engine room looked like a real pain! What stand do you use for your camera?

[@TheHomePros6221]

It sure was nils!! I use a bosh tripod

[@armandopatane5343]

Yeah that lock tight is something else

[@TheHomePros6221]

sure is

[@alexanderlewisreed2343]

yo I have one of these Yamaha skis out in New Zealand I had the same trouble with cranking look at the plugs from the switch you'll find that the clear one with the black and brown wire is corroded inside😮

[@TheHomePros6221]

very good tip thank u!!

[@5.slow-ranger]

Just to let you know that big line going to the crank are on the seadoo that was under the carbs you need to fill that line with oil it keeps the rotary gear lubricated

[@TheHomePros6221]

thank u so much for the info!!

[@5.slow-ranger]

@@TheHomePros6221 no problem man

[@scottguenthner4106]

90 and 120....unless your really bored, just leave it....in my experience those things have two speeds, off and wide open! Just run em, they will probably serve you well for years to come....I mean really what's the worst that could happen. 🤔 😆

[@TheHomePros6221]

Well I rechecked and the Yamaha rear cyl was at 60psi 🙁

[@pestcontrolguys]

Those would be great for a river run, If you ever come to Missouri with them let us know!

[@TheHomePros6221]

Sweet!

[@scoresandry]

Did you bleed line from oil tank to pump?

[@MegaKencam]

If memory serves the Yamaha should have 120 psi compression and the Sea-Doo should have 150. 90 is low. Did you test it again after you ran it for a while? Does the Yamaha have an air box or flame arrestors? It might run lean without them. I wouldn't use old 2 stroke oil. I've seen it gel in the lines. You need to check/replace the oil in the jet pump.

[@TheHomePros6221]

yes I think the comp is a little low I tested after running and it was even lower so I think it’s time for a topend, it has the arrestors and the cover, oil is also new

[@libertyforamericanow]

I've got a bit of experience with those Yama 800 engines. Pain in the ass to fine tune those carbs.

[@TheHomePros6221]

thank you soo much Aaron!!

[@anthonyaneke7084]

how to do adjust the idle??

[@libertyforamericanow]

@@anthonyaneke7084 if there's a perfect way I don't know how to do it. I clean them real good with new OEM carburetor kits. I knew how many turns the fuel mixture screws went in so I knew where to turn them out to. I also did the Popoff pressure and I ordered fuel mixture screws with t handles. Other than that you just have to turn the throttle screw up. That's really a terrible design almost impossible to get to the fuel mixture screws while it's running with the exhaust on

[@TheHomePros6221]

@@anthonyaneke7084 I think u have to adjust the cable to adjust the idle

[@joeloyd56]

I appreciate the video.

[@TheHomePros6221]

I appreciate you joe

[@markusplatzer8300]

Awesome that you got them working. Sometimes a little perseverance goes a long way. Especially for the great deal you got them for.

[@TheHomePros6221]

You got that right! thanks a bunch!!

[@nickwinn]

What was the "cheap price" for those? I don't feel like you came clean on the price.

[@TheHomePros6221]

I actually traded them for a old trailer I paid nothing for

[@09FLTRMM77]

MM77 Approved 👍🏼👍🏼…………I’m starting to think you can fix just about anything!! LOL!

[@TheHomePros6221]

Hahaha well if I could only fix myself

[@ronhanish]

Looks like you know what you're doing for the most part did you get them going okay? It look like your switch might have been bad on that one but you had it started? Maybe because you didn't have the key or something I don't know or a bad switch I don't know.

[@TheHomePros6221]

Thanks Ron i did get em running and the switch was good the dash was bad but I fixed it be sure to watch the whole vid if u can and I also have part 2 coming out later

[@Ants_Pants]

Awesome video buddy. You are AC cousin im thinking 🤔👍😅

[@TheHomePros6221]

hahah we are very much alike lol

[@Ants_Pants]

@@TheHomePros6221 congratz on your success mate. You deserve it hands down. I wish you nothing but the best. You will do great. Keep posting videos like this and you will be set 👍

[@TheHomePros6221]

thank u so much andris!! I really wanted to have more riding footage but couldn’t work it in this vid, also I’ve been finishing up the skid steer got most of it painted and then I can finish my underground bunker lol

[@TheHomePros6221]

we are also both mostly italian

[@anythingwithplanes]

i bought 13 of these seadoos this summer. displays are always junk the gtx should do 50 with a stock prop and good wear ring

[@TheHomePros6221]

that’s cool man!! so what did u do about the displays? can u fix em?

[@anythingwithplanes]

@@TheHomePros6221 it depends. I’ve only ever been able to rebuild one with a. New film on the display. The rest I’ve either noticed cared about or I bought a working. One off eBay

[@TheHomePros6221]

thanks man 🙂

[@BaileysDad369]

Excellent video! I’m picking up a SeaDoo basket case soon. Thanks for some good info!

[@TheHomePros6221]

Glad it was helpful! check out my other vids on them

[@cwatson42785]

Rule #1 of jetski repair videos on KZbin.... You need to say what you paid for them! Come on buddy, what's the big secret?! Loved the video! Very well done, subbed! 🍻

[@TheHomePros6221]

hahah I pretty much paid nothing I traded them for a trailer I paid nothing for

[@cwatson42785]

@@TheHomePros6221 Sweet! I edited my comment as im in the process of watching but great content bud! And I subbed! I have a 96 yamaha waveraider 760 that I got for 1200$ last year and the thing is absolutely MINT! The guy had ocd and super meticulous. Like he cleaned inside the engine bay with a toothbrush every year lol. Only 170 hours and for a 96 that's pretty low. Oh and also the trailer was in excellent shape too! And I bought it in season. One of those super lucky finds and guy had just posted it. Hopefully you can find some more fix er uppers for content and can probably make some money. I'll stay tuned in! Nothing better than cruising on a jetski on a hot summer day! 🍻🍻

[@TheHomePros6221]

@@cwatson42785 thank u very much Chris!! And that is one awesome find!! U don’t come across deals like that all the time nevertheless from someone who took really good care of it!! Awesome find brother and thanks for the sub I really appreciate it 👍🙂

[@thefadebeta580]

My partner wants jet skis if I find one not working for a good price I will buy it and learn as I go when fixing it

[@TheHomePros6221]

Bring a compression tester w you, it’s the best way to determine the condition of the engine, im working on a part2 rite now rebuilding the engines on these skis

[@thefadebeta580]

@@TheHomePros6221 Great idea, then if I don't see any compression then move on

[@TheHomePros6221]

@@thefadebeta580 yes sir

[@aidanscracked831]

How long did it take you to finish the video?

[@TheHomePros6221]

Off and on a few weeks, im working on part2 now

[@stowaway475]

A bro I tell everyone viniger mixed with dish soap is a very good degreaser cheap to you can mix a couple gallons in a sprayer

[@TheHomePros6221]

Thanks for the tip I’ll try that!

[@allenanthony4033]

Fine job my man 😎

[@TheHomePros6221]

Much appreciated thank u

[@putzeus9953]

happy 4th of july from denmark :)

[@TheHomePros6221]

thank u brother!! hope u had a great one

[@putzeus9953]

@@TheHomePros6221 dont really celebrate it here but yeah good work day ig 🤣🤣

[@TheHomePros6221]

@@putzeus9953 well hope u had a good day anyway 😊

[@mattjohnson8718]

90psi is definitely low but 120 seems decent. Was that a dry or wet compression check? May be able to get away with a new set of rings and a dingleball hone.

[@TheHomePros6221]

your correct unfortunently u can’t hone these cause they have a nikasil coating in the cyl

[@TheStephenspann27]

The gas may have had some evinrude premix in it.

[@TheHomePros6221]

likely but I know it did sit for awhile

[@edgarsantiago7498]

I have the same ski. I don’t know if anybody answered your question about the dash the gauges but it does that to save the battery when you’re out in the water when you have the engine off so that’s normal that dog cages turn off after the engine is off.

[@TheHomePros6221]

it’s working fine now after I bypassed the pass lock, but before it didn’t work at all unless I jumped the solenoid

[@michaelchampion1894]

I fish here all the time I've been hung on your dock before lol.

[@TheHomePros6221]

Lol no way!?? In smiths station al?

[@Remeberwhen]

Check the compression again now that you ran it. See if it improved.

[@TheHomePros6221]

I think it got worse