Buying my first TIG welder - Unimig Razor 200 AC/DC

I have always wanted a TIG welder since high school. I finally bit the bullet and purchased one. Now the learning begins!

[@kizzyaggots1]

Great video mate keep em commin

[@peatergriffin]

I really enjoyed the tig welding learning curve. Do yourself a favour though and get a bit of plate for your bench to weld on and attach your earth to that. The more comfortable you are the better your weld will be.

[@aheindustries]

Definitely mate, I have that steel bench to the right of my normal one which I could set up on. If I get serious on a project I probably would. I am still just pottering here and there with it. I am probably using it once a month so not too much!

[@soapybee4471]

Mad vid mate going to have a crack at Tig shortly myself

[@aheindustries]

Good luck mate!

[@rambom161]

good stuff mate every body starts somewhere.

[@aheindustries]

Thanks mate!

[@aaronmurakami1120]

hope you have the ground and torch hooked up correctly for A/C. It should be torch hooked up to Negative and clamp to positive

[@aheindustries]

Sure do!

[@rsbharley4766]

Nice job for your first go, it's a big learning curve to get your head a round, so they say. Did you get a D size bottle or an E size ?. I am looking at buying the same tig and then comes the fun part. All the best, Cheers

[@aheindustries]

Thanks mate, I use the E size bottles. May even go the G next time round hey. The good thing now you don't have to pay the monthly rent on bottles so may as well go the biggest so it means less swap overs.

[@rsbharley4766]

Thanks for the reply mate, much appreciated. Have a great weekend, Cheers from West Oz. @@aheindustries

[@aheindustries]

@@rsbharley4766 Best place to be mate!

[@aaronmurakami1120]

alsao you should watch some videos on how to tig weld it is not easy and that is how i learned it ius a steep learning curve but definately take some time to watch some videos and do some reading first Then try your hand at it once you have kind of learned somwe theory and also learned how to set it up. and don't worry about filler right away learn how to makw a puddle first then worry about filler later. Just some small tips to get you started. if you want to self tweach do some research first