C8 Z06, E-Ray, and ZR1 spacers for the PERFECT OFFSET! Works with Carbon Ceramic Brakes!

[@HorsePowerObsessed]

Gotta love titanium lugs! One of my favorite mods on the z06!

[@dbmracing2019]

@@HorsePowerObsessed Can’t wait to lower my car this week and add my titanium lug nuts I got from Horsepower Obsessed!

[@10SecondZ06]

Looks great. Nice video

[@dbmracing2019]

@@10SecondZ06 Thank you my good man!

[@E-RayC8Nate]

10:32 55% lighter than the OEM lugs! (And they’re longer!)

[@dbmracing2019]

@@E-RayC8Nate Thanks for letting me out these on your car bro!

[@E-RayC8Nate]

@ no thank you for hooking it up!

[@dbmracing2019]

@ Anytime my man! Looks WAY better now! Love your car

[@crystaleanne]

🙌🏼🙌🏼🙌🏼🙌🏼

[@dbmracing2019]

@@crystaleanne finally

[@E-RayC8Nate]

@@dbmracing2019IKR

[@lewislgZ06]

I wish these had been available months ago. I had my Paragon 20mm spacers OD machined down to fit inside the recessed area on the CCB rotor hat. Works out the same, but more time and hassle. I may do the fronts later, but not sure if it’s worth the expense for 5mm. I like my OEM Satin Graphite wheels though, so maybe later on. Thanks for the video. 👍

[@dbmracing2019]

@@lewislgZ06 yes sir! Thanks for watching

[@mikeoleary340]

Using a pair of wheel hangers to remove the wheels ensures no damage to the CCBs. I still put the foam protectors on the rotors before removal as a precaution. I looked at Foundry site and see they are sold out of the black lug full kits. Will keep an eye out for restock.

[@dbmracing2019]

@@mikeoleary340 I wish Nate had a set of hangers for the wheels or had brought his foam pieces with him. But in the absence of either of those…… just very careful with as many hands as you need. Thanks! And keep an eye out…. They should be back in stock soon!

[@anthonyadkins5339]

​@@dbmracing2019 will these spacers work with the carbon fiber wheels?

[@dbmracing2019]

@@anthonyadkins5339 not these yet Anthony! But we are working on a set specifically for the CF wheels and once he has them we will be bringing them straight to you guys!

[@anthonyadkins5339]

​@@dbmracing2019ok thanks bro. Let me know asap so that I can order. Great content by the way

[@dbmracing2019]

@ I still have your number I believe. You’ll be one of the first I promise my man!

[@paulsandum4443]

It is very important to mention that any aftermarket spacers on the carbon ceramic brakes needs to be machined so they fit inside the protruding lip on the rotor.

[@dbmracing2019]

@@paulsandum4443 Correct… and these are specifically designed for the CCBs. Thanks

[@2020matrix8]

Hub Centric..

[@foundry_3]

Yes and yes! Thanks for the callout as these have been designed with both steel and carbon brakes in mind.

[@joem7755]

Ha... thanks to you talking me into getting the forglites, I now have no money for my AWE exhaust on my e-ray.. lol.. I keep my CCB protection foam in the front. doesn't weight anything or take up too much space.

[@dbmracing2019]

@@joem7755 Very wise to keep foam up front and with you!

[@THESocialJusticeWarrior]

Bearings are not designed for that offset. They may fail. The correct way is to get wider wheels with the proper offset.

[@dbmracing2019]

@@THESocialJusticeWarrior Bearings will be fine with a 20 mm offset. Folks have run spacers for thousands and thousands of miles with no issues. Yes the BEST way is to buy new wheels with the offset you want I agree but spacers are a good work around. Was the first mod Brandon and I did as soon as we got ours home until we both got custom wheels. Most people aren’t going to put 100k miles on their Corvette in reality.

[@larrynewberry3500]

Why didn't you add a link to the product. Did you give the size of the spacer. Thanks for the video.

[@dbmracing2019]

@@larrynewberry3500 Will add link in description…. And it’s 20mm rear and 5 mm front

[@foundry_3]

Correction: 20mm rear, 6mm front

[@M8trixmedia]

Have a link for the product? Sorry if I missed it

[@dbmracing2019]

@@M8trixmedia will be adding in description when I get official sales link

[@nwtrackaddicts]

The only downfall is the additional rotational weight, but definitely a good option for stock wheels until a custom set with the desired offsets are obtained.

[@dbmracing2019]

@@nwtrackaddicts there is only a difference of 0.6 lbs when you subtract the weight saved from the titanium lug nuts

[@hermancircus]

Will these work on the Z06 iron rotors without cutting the lug studs??

[@dbmracing2019]

@@hermancircus yes they will 100%! Can’t recommend them enough! GREAT product. Link is in the description

[@derrickpayne4111]

Do they work on the z06 carbon fiber rims, and did you make a decision on fab speed yet?

[@dbmracing2019]

@@derrickpayne4111 This particular set does not but there is a set coming….. hang in there!