Trucking an IH Dresser Dressta 175c track loader back to the shop

[@wonsik-kim]

Hello friend, I saw a nice truck 🌈🙋👍🇰🇷

[@RevMishka]

Man that Peterbuilt is sweet…I love hearing her sing…nice get on the TL…I’m guessing 365 miles…keep up the great work! My favorite line in the video: “$5.04 for diesel, we’ll have to do something about that”; yes, we certainly will!

[@C_CEQUIPMENT]

Lol

[@MitchGaar]

I watch all of your videos along with Dirt Perfect and Letsdig18. You guys are hard working Americans. Great content and American Vales. Keep them coming Clint!

[@C_CEQUIPMENT]

Thanks

[@C_CEQUIPMENT]

Thanks

[@chucksinger1916]

Wish I was with you! I’m old we cleaned our track’s daily Somebody should have taught those wing nuts ! LOL

[@logdog8920]

The company my dad worked for back in the 60'sand 70's had a IHC 150 loader, they eventually bought a 175 in the early 70's. They were good machines. They used them mostly for loading field stone/rip rap out of farmers fields, for use along ditches and streams for errosion protection. On one job loading out of an old stone pile along a woods/field edge, the operator dug into an old "Stash" of bootleg/moonshine, from the prohibition days. Mileage one way 305.

[@johncushman7458]

They Also Made Pickup Trucks Back Then Also. The General Contractor That My Dad Operated Heavy Equipment Etc. For Leased Several of Their Pickup Truck's For The Company.

[@logdog8920]

@@johncushman7458 Hi, I actually have an old running 1953 IHC 1/2 ton pickup. Also a 1955 IHC 170 dually non runner truck, with a portable track pin press set up on the rear. There is lots of pressing blocks and dies for pressing the pins and bushings out of the various sizes of tracks of dozers or excavators. This one was actually run by a IHC heavy equipment service dept.

[@johnwilliams5316]

Another awesome vid Clint. Keep ‘em coming 👊 365 miles

[@C_CEQUIPMENT]

Thanks

[@proberts34]

Hey Clinton. I realize I'm 2 years and 4 months out of date on this mileage estimate (and not in the running for a sweatshirt), but before I start reading comments, I want to put in a distance estimate. Based on what I could determine about the route you took, I estimate 342 miles. . .from your shop to the Tru-Pac in Trenton, TN. Now it's time to get on with the follow-on videos for this track loader. Thanks for posting and for taking us along on your trip. Great fun! 🙂 By chance, I was trying to figure out where you went to pick up that snazzy track loader with its 4-in-1 bucket. It's something I do sometimes while watching videos. When you were on your way back home, I saw a road sign for US 45W. That caught my attention, because US Route 45 went through my hometown in central Illinois (about 60 miles west of Terre Haute. One of my bucket list items is to one day drive all of US 45 between Ontonagon, Michigan and Mobile, Alabama.

[@stevemitchell6821]

Love your truck. I retired 2 years ago from NCSHP as motor carrier Trooper. I am now driving a 2018 W9 studio and I'm loving it. Thanks for the share of your truck and your pre trip safety concerns. Be safe out there.

[@brandondonovan9616]

I believe it's somewhere around 357 miles one way

[@rp1645]

I ran a 125 international in 79 on a big mainland sewer job. Trying to remove mud on back fill on a very muddy job. Then I had to move a 175 like yours on a parking lot job. Boy the power loading the front bucket. It just filled the bucket over the top. For a front end Loader they had power. I ran the 680 Case on hoe Packing. The guy running backfill and pea gravel liked the 850 Case. It was faster. Man when those machines were new. It brings back memories of that job

[@dustinhenry8221]

Awesome to tag along with you on this! I enjoy your videos and knowledge, I was a road mechanic for JD a few years back, got out before the emissions made you hook a laptop first to diag before anything else, my guess is 362 miles.

[@billbyrnes9505]

275 miles. Ah, the good old days. Retired five years now, otr driver, thirty eight years plus. Thanks for the detatch, and peterbilt, not to mention the deer! 😁😁😁😁😁👍👍👍👍👍

[@C_CEQUIPMENT]

Thanks

[@NotJustaTool]

Nice having the Diesel tanks at your shop. Still filling up at $500 instead of the current $1000. SMART MAN!!! G1 Clint.

[@kylejones2075]

Ohio

[@JCrook1028]

Actually if you listened to what he said he said they had just filled that 500 gallon tank and he hated to think what it cost. So......... no, not at old prices.

[@kylejones2075]

No he also asked what prices were near us. That's what they are now in ohio

[@JCrook1028]

@@kylejones2075 Can you read? Keith (which is who I replied to, not you) did not say what prices were in his area...

[@kylejones2075]

Sorry bud just glanced at it didn't intend on pissing u off

[@robertmilligan2792]

Hi I am from Scotland in the UK and currently we are paying in dollars 11.85 per gallon of diesel and petrol is much the same price maybe a dollar less quite a bit of a difference plus we pay per litre not by the gallon another cool video by the way the sound of your truck is awesome keep up the good work 😀 👍

[@kenscanlon7661]

Always enjoy your Road Trips! Fascinating to see the types of Heavy Plant you pick up! Diesel currently around $8.00 per gallon ($2.21 per litre ) Down Under in South Australia, and like you guys we have vast distances to travel across our Continent! 🇦🇺🦘

[@markgarton3525]

Like the vids. I live in southern Ontario Canada and I am paying $2.15 a litre for fuel, and there is 3.87 litres per gallon. The Biden price hike is hitting everyone and it shouldn’t!!! Let Canada and the US work together on crude oil and not beg other country’s for there blood oil. That’s my thought for what it’s worth. Hope ya have a great day and thank you for the vids!!

[@C_CEQUIPMENT]

Yes

[@wrstew1272]

You are confused about what our president does. He doesn’t run the petroleum syndicate. That is another group, not government. I don’t think Trudeau sets prices on Canadian petroleum products, but if he does it isn’t in your favor. Maybe you could contact your representatives and complain to them about your fuel price instead of wrongly posting about our political setup. We are overtaxed by a bunch of paid for idiots who spend our money like there is no limit, but Mr. Biden has little to do with the idiots. That is our problem with our elected representatives, but our President has other issues to deal with.

[@richardmackie2177]

May 9th 2022. In South Australia we are currently paying A$2.00 per litre! And that is with a Federal Government excise temporary discount of A$0.22/lt. With fluid conversion to US gallons and exchange rate that equates to around US$ 5.30 per US gallon. Enjoy watching and particularly you mentoring your sons - fortunate boys indeed. Pass on those valuable skills to keep the C & C motor (or is that an engine?) going in their hands if they choose.

[@C_CEQUIPMENT]

Thanks Your fuel is about the same as ours

[@Craigd68]

Letsdig18 might be interested in it he loves the old track loaders it's going to be an awesome machine when you get finished with it, can't wait for the videos on it to come out.

[@AdelinoGambiarras]

She's the same age as me bud we are twins 😅😂 You mention earlier in the video you where driving for 5 hours and in that basis I'd say 500 miles.

[@terryrogers1025]

As of 3/18/22 in south central WI. Diesel was running $4.69 p/g, regular unleaded $3.99 p/g and it changes every day. I will tell you this, that is one sweet truck you have there young man. That will be a nice machine for someone, especially after you guys get done with it. Thanks for the ride along.

[@C_CEQUIPMENT]

Thanks

[@jaquigreenlees]

That is backwards to here, regular unleaded is around $1.59 / litre ( $6.36 / gallon ) and diesel is generally $1.40 / litre ( $5.60 / gallon )

[@hansjensen5422]

@@jaquigreenlees where?

[@jaquigreenlees]

@@hansjensen5422 British Columbia, Canada.

[@rexcolesr9502]

1000 miles, I'm a retired 103 operating engineer up here in the North part of Indiana out of Ft. Wayne, I really enjoy watching you work on machines

[@mikelovin7]

Nice find, with a little tlc that will be a great tractor! Guessing 310 on the mileage and I'll probably be a mile over or a hundred short lol Btw that truck sounds great, maybe even better than DP's Mack lol

[@patrickmorris3721]

It’s €9 or $9.75 a gallon in Ireland 🇮🇪 ☘️💚crazy times we live in. Love the show 👍🫣😀you should see if anyone can guess were your bulk diesel? Tank is 😂

[@jasonharlan6100]

That Pete sounds great with that cat engine! I used to maintain 10 Pete’s with trailers back in the day. My mileage guess from start point to final destination of pickup is 336 miles!

[@jasonharlan6100]

I listened to the end of the video again and the correct mileage from the shop at Nashville to where you picked up the loader would be 343 miles. For some reason I thought you said from where you left in the morning where the truck was park! It’s one of those 2 numbers lol

[@tedc7714]

Way back before you tube days we hauled red cedar out of Arkansas. The guy had a de limber and most of it was less than six inches diameter. Anyway it was an adventure. Back in a mile and drag the log truck out with an old dozer. It was a midnite run. Hehe. A LOAD. Usually a LOAD of 6 quarter Beech going down, to Budweiser, The beer really is beech wood aged. The old MACK earned its keep getting the cedar up here.

[@roybrown6831]

Another great video, Clint. I can't wait to see you and Kevin working on it. I'll guess 423 miles one way. With only 300ish hours, I wonder how the cab got so rusty on the inside? I can't come up with any ideas.

[@C_CEQUIPMENT]

Looks like it can from Florida so may of seen some salty air

[@lylechapman9757]

Geez that’s a nice trailer Clint! Awesome setup with the Pete in front of it😍

[@C_CEQUIPMENT]

Thanks

[@challengecompleted55]

My guess on the one way mileage is 368 miles. That's also a gorgeous rig! As for fuel, I just got back from a run up to MN, and averaged $5.40/gal for #2 at Pilot/Flying J.

[@johncushman7458]

You Were Nearly Accurate with Your Milage Figure. I-69 West From Nashville, Indiana. To West Tennessee is 365.0 Miles

[@homesteadfromscratch]

Nice! I have 1963 175. Working on fixing oil cooler leak. Big Gal these machines.

[@skull4663]

It's crazy what fuel costs are but I don't see anything changing until we become energy independent again and I think that will be when we get a new administration in the White House

[@acutecareemsdispatch]

When were we energy independent? I must have missed that one. Guess you were not alive in 1973.

[@DavidCobb-uc4qr]

@@acutecareemsdispatchwe exported energy during the Trump administration. Some folks refuse to see truth because yellow man bad! Pity

[@jeffreyneihart1614]

I'll say 410 miles. Love the jakes on that Cat motor!!!

[@Eric-fv4jx]

Look at this man work... I like your backroad lane sharing policy. Your rig is as long as my house. What a thrill.

[@Ben-xq8ge]

The truck driving segment on the winding roads was a great lullaby…..lol put me right down with them Jakes.

[@dennisadams2902]

Get some silicon spray and hit them rubber rollers on your hood it will stop that squeaking awsome vidios keep up the great content.

[@robertconreux8079]

Really enjoy you channel my guess on the mileage on the Dressta loader pick up 359 miles🤞

[@dlc4096]

Love your channel and made it all the way to the end. I will call it 339 miles.

[@C_CEQUIPMENT]

Thanks

[@brianelliot2719]

I was try to help you out when you were driving the loader onto the trailer; tried to look around the side to make sure you were going up the ramp ok. Then realized 3-dimensional video wasn’t here yet but someday we’ll be able to participate. 😉

[@C_CEQUIPMENT]

😂

[@Mountain_Man73]

Gahhh that Pete sounds so freaking good!!!! 307 Miles one way

[@C_CEQUIPMENT]

Thanks

[@brianmcclelland790]

I love the outside truck shots of the axles, trailer and anything else.

[@davidr6585]

343 miles one way. Fun video by the way, ridin' shotgun up and down the roads!

[@C_CEQUIPMENT]

Thanks

[@ronaldvanotten6812]

385 miles one way... Just a guess without doing google LOL! Fun ride! Ron...

[@MichaelLemaster-i8v]

C&C is too cool , they got the old shop , new shop , new old shop and the new new shop. Just watching old video

[@danielpullum1907]

Clint, We just made a trip to Charlotte NC from Decatur, IL. We saw gas at 3.89 in NC and 4.44 in places north. Diesel was 5.+25 to -4.99 at a Love. I didn't see of think of it when we got back to Decatur this afternoon, 22Mar. Govn'rs last fuel tax took us above IN. Then Decatur added a fuel tax for city streets~!~~~~!!!!!

[@C_CEQUIPMENT]

Wow

[@rickieburton1701]

I live in Western Kentucky. I noticed a lot of miles along your trip. My guess is 244 miles.

[@gibsonlandscapeconstructio7984]

Just over 2 dollars a litre here in North bay, Ontario 🇨🇦 about 300 miles one way Great video Clinton

[@vern7520]

Love the sound of that truck!! Especially the jake! I will guess 341 miles.

[@C_CEQUIPMENT]

thanks

[@charleslloyd4253]

I love the sound of the Peterbilt. Takes me back to days with few worries.

[@splatterize]

Thanks for the ride. I would guess 371 miles to get to the pick up point and 690 round trip because you went home and then to the shop. IDK. Thanks again.

[@chipps1066]

Govt sure hasn't showed that tractor much love.

[@soundadvicesomewhere9027]

278 miles - Clint this was another great road trip for us!! Look forward to ur filming of the refurbishment of low hour machine. Thanks from somewheres in SWMO!

[@brentburnett8627]

Clint, the price of diesel here in Yuma is $4.84. I really like your videos. Brent Burnett

[@terrylonewolfswisse8116]

Diesel is high 3 dollars plus, gas is 3.14 for regular plus which means ethanol :( Time to get rd of the people putting us in this shape, love watching your videos and will keep watching. Watching you from north-west Iowa.

[@jasonhoose5215]

Ain't nothing like a damn rattling cab Pete 😅

[@julianearl5026]

Thanks for the ride along Clint ... like being a tourist from my armchair ... Deisel in Western Australia 19 March 2022 $US6.16 per 1 US gallon 😨😨

[@C_CEQUIPMENT]

Thanks for watching

[@tyrankin2767]

You need a strobe bar on top like what DP has on the old puppy dog👍🏻

[@johnholland1560]

Must say it's good to hear the sound of the diesel engine in the videos ,rather than annoying music, excellent trip that one ....

[@jimmycurran5355]

Enjoyed the ride along. That ole Pete is a real beauty. Sounds good too.

[@williammarshman2204]

Hi Clint Bill from Sydney Aust .The cost of diesel here is $7.40 US per gal and unleaded gasolene is $2.10Aus per LITRE. Fuel here has gone up 25% in the last week. Keep up with the videos . I came over from DP .

[@C_CEQUIPMENT]

Thanks

[@8osWeReTheBest]

I'm in SC upstate, sphinx is charging 4.89 for truck & 4.89 for off road! I'm running a dump truck, track loader, skid steer, & 2 tractors for diesel & 1 gas skid steer. I'm a small company & almost having to double charge from 2 years ago. We have TRAITORS aginst us, in power. MAKES ME VERY UPSET!!!

[@angelo60415]

Nice find can't wait to see the finished product.💪💪👍👍3/21/22 diesel here CT $5.19

[@genegoodman5233]

Man that was a long day, think I’ll go take a leak. Catch up with you in the morning and ride over to the new shop. Enjoyed the trip, waiting on the next video. Stay safe Clint

[@C_CEQUIPMENT]

Lol Thanks

[@BentTreeFarmPa]

I have a pretty good idea where you were in western Pa, I live really close by. I wish I had known, I would love to meet you and shake your hand and buy you breakfast or lunch for entertaining me with all your hard work! Love the videos.

[@C_CEQUIPMENT]

Thanks

[@darrylmarsh5434]

Can’t get over how little traffic there is out there

[@daviddesimone342]

Excavator is saying take me with you Clint lol

[@nknatewood8226]

+ C&C Equipment: Another _great_ video of some of the more arcane activities of the heavy equipment business. Not the norm of day-to-day work of repair and/or restoration. That said, you must be pretty tired, getting on the move at 4:00 AM or so, trucking this machine up from Tennessee. Looking forward to seeing the work required to fix this rusty ol' track _'leaker'_ . In any event, as requested, the standard _YT_ 'thumbs-up' has been checked. As always, keep these comin'!

[@C_CEQUIPMENT]

Thanks again!

[@nknatewood8226]

@@C_CEQUIPMENT : As always, you - and _'the boys'_- are more than welcome! Enjoy your work, both the equipment and _YT_ sides of it. Keep 'em comin', my good man!

[@shanesmith5384]

Need to build you another brace on your frame, that thumb on your trailer will bend the factory brace. Learned it the hard way. Nice set up, better than a old green mack.

[@billvernon5759]

358 on miles. I enjoy your videos!

[@andylarner3531]

This was a very enjoyable series of videos your plasma cutting saved the project

[@farmboy2143]

I'm glad to see another person that likes camo as much as I do! #makecamogreatagain

[@C_CEQUIPMENT]

Lol

[@janlesinski4719]

Love the sound of the truck decelerating

[@jimtaylor1204]

I recognize the scenery between Unionville and Trevlac on 45. Been down that road many times.

[@henrymichaelwilson8107]

My goodness it must be tearable for some people loosing there home's to Tornadoes. Having to start over again. It most be hard a upset like that in life.

[@KHWindham]

Thank you for the road trip. (and almost suicidal 🦌)

[@PWRMVR22]

311 miles. I enjoy your content. Thanks

[@Cedarburg3w]

Great videos as usual. 267.5 miles. Size XXL and add a hat too.

[@charliee7142]

I"m glad you din"t hit the deer 😀

[@marshalllarson8970]

Glad I wasn't meeting you in my car on that little road about dark. Reminds me of the movie Duel starring Dennis Weaver. Check it out. LOL

[@scottnelson2667]

I say 386 miles one way. Hello from Wisconsin!

[@russellrankin7980]

Good to see the big boss man again. 😁

[@chriskatherineshannon3762]

328 miles one way. Love the videos btw!

[@johnbulla8708]

U R TOTALLY AWESOME AT WHAT U DO TO HEAVY EQUIPMENT. PHENOMENAL GREAT PERSONALITY.

[@C_CEQUIPMENT]

thank you!

[@williamgraham8809]

You are the real deal, assessing machines, fixing, operating and excellent truck driving skills. Love your channel and relationships with your dad and employees!

[@C_CEQUIPMENT]

Thanks

[@jomo388]

Looks like a trip to Trenton,Tn. Google says 343 miles.Really enjoy your channel !!

[@larryshillings6672]

Can't wait for a new video. I have watched them all. I am in awe at your general knowledge of equipment. My guess is 321 miles. See ya.

[@kenlee5509]

Miles: 42, the correct answer is always 42. The double grousers on those tracks look like they provide a smoother ride than singles.

[@donaldmendes184]

Watching your day back of a track loader reminds me of encendent , they guys were unloading and A C TRACK loader with no Rippers, the trailer was old school system , the truck facing up hill , the guy started loading the rig , ass he climbed up on the trailer he some how lifted the back axle of the truck , witch caused truck to roll back and flip the loader or backwards, it didn't have a roll bar on equipment, it killed the guy when it turned complete over. On the driver.

[@C_CEQUIPMENT]

Wow

[@JohnRichardJones]

372 miles one way. I enjoyed the video, especially watching you hitch and unhitch.

[@semorrison7082]

I like your channel better and better, with each new video. I really enjoy the way you explain things, keep up the good work.

[@C_CEQUIPMENT]

Thanks

[@kenwebber9429]

I would be companying yours is $ 15.00 per gal for deiseal , and $240 per liter for gas in Canada

[@chester4093]

239.6 one way. Great road trip

[@sagaciousalso5026]

Enjoy the efforts, on your behalf, in allowing us to tag along with your search for equipment; very interesting! My dad was a heavy equipment mechanic during WW2, working with those who constructed the Burma Road into China. I started in heavy and highway construction in 1973, on the first two contracts of Interstate I-88 in New York State. At that time, there was a considerable amount of equipment for the initial excavation stages for both contracts. At that time, diesel was $0.13/gal and regular gas was $0.179/gal. These were without taxes but included a markup for delivery and profit because use was for off-road highway construction. The following year saw prices almost double. As for length of your trip, perhaps 640 miles, round trip? Continued success!

[@C_CEQUIPMENT]

Thanks

[@C_CEQUIPMENT]

Thanks

[@marcjoly3622]

Oh boy i am fortunate to have seen the dears..

[@randyadams4664]

Can't wait to see the video of this one brought back to life.

[@mikeharrington366]

310 miles. keep up the good work.

[@htdriggers]

My guess is 351. Great time also. You didn't stop a lot and you passed everything on the road. Howard Driggers

[@C_CEQUIPMENT]

😁

[@henrymichaelwilson8107]

We get a lot of Dear as well. They are nice to see.

[@timziegler9358]

A "How to Video... on How to do it Right! Very professional! Thank you.

[@martineastburn3679]

Thank goodness I put off the pain for a month or so - bought 10 gallons of Diesel and 10 of gasoline. We use road tax fuel to mow our ranchette. It is higher than before for years.

[@lordcaptainvonthrust3rd]

Late to the party here, Clint, but currently diesel works out at just over 9 dollars a gallon in the UK. And that's gone DOWN in the last 12 months

[@Farmall450]

That's a good looking binder.

[@ChristopherAdams-tl3me]

My Grandfather use to work for the railroads