Good Video, But as you run into errors with the entities disappearing, please show how you corrected it. There is just a video cut and the problem many new users experience will not be solved.
@R1jamn3 жыл бұрын
When you trimmed the .375 radius for the .125 radius some of the circles had partially disappeared. I get the same thing. But then you had stopped the video and the .375 radius where back so that you could continue to add the .125 radius. What did you do to get the circles back?
@MuscleMustang0710 ай бұрын
same here
@TheCrossover3692 ай бұрын
yeah, something was definitely wrong but he figured it out and edited it out 😂😂 trying to figure it out myself now
@hardwarecitycollectors6024Ай бұрын
Click each corner inside the circles and click divide and then continue to make radiuses
@kevgh3869 Жыл бұрын
can anyone tell me how to make a center point the squares will snap to ?
@MahableshwaraRsMahableshwaraRs Жыл бұрын
Thank you so much sir 👌
@Nislija9442 жыл бұрын
One question, I don't know how to turn it on to show me a 3D graphic representation of the drawing. It shows me normal 3D but no colored surfaces, and I'm wondering how to include the option there.
@CADCAMPDF2 жыл бұрын
Right Click on any empty side near the part and select solid color and changr from their. Let me know if works
@mohamedachrafharbi853 Жыл бұрын
I need to download mastercam first. May you help me?
@kevgh3869 Жыл бұрын
to start with my initial screen does not have the xy lines in the center so you missed telling us information right from the start.
@liveomm Жыл бұрын
yep
@makingacomment11 ай бұрын
Simple. Go to the “FILE” Tab. (WITHIN THE FILE TAB) Go to the Managers Section - Click “ToolPaths” Now go to the Display Section - Click “Show Axes” and “Show Gnomons” Lastly go the Grid Section - Click “Show Grid” Hope this helped take care.
@SushiaurpannerАй бұрын
@@makingacommentno bro can you be more specific I am using mastercam 25
@makingacommentАй бұрын
@@Sushiaurpanner damn they might of changed the layout I was referencing MASTERCAM 2024 when I made the initially comment. My apologies on any confusion.
@gabrielperezcanto2 жыл бұрын
Thank You
@ofwdad58932 жыл бұрын
thank you bro
@rsilvers1292 жыл бұрын
So if I were doing this in Solidworks or Fusion 360, I would have made the outer shape in wireframe, then extruded it. Then draw the next rectangle *on* that extrusion, then cut into it. Then draw the inner shape on the cut-in area, then extruded it upward. When watching this video, I at first assumed one could not do that in Mastercam, because you input the entire drawing first. But I see you actually can do it like Fusion 360 or Solidworks. So I am just thinking - since most people already know Solidworks or Fusion 360, why not teach using it to be consistent with those other programs?
@jonivanart4 жыл бұрын
What are you doing to repeat the circle in all four corners? I click on it once the the circle starts over again with measurements etc...
@MuscleMustang0710 ай бұрын
maybe using shift?
@PardeepSingh-jh6ou2 жыл бұрын
Hii canbu help with my assignment
@lesterboss15775 ай бұрын
Thank you
@fariszuanzamri5414 Жыл бұрын
thanks buddy, im learn lot from your video... i use the new version mastercam, but not so much different... cheers❤
@Bachurin3 жыл бұрын
GOOD WORK, THANK YOU SO MACH
@CADCAMPDF2 жыл бұрын
Appreciate you comments
@cuauhtemocdominguez93202 жыл бұрын
these ads kill me
@panicartist603310 ай бұрын
BRILLIANT VIDEO PLEASE MAKE MORE
@reshminarasimhan1812 Жыл бұрын
Bit louder pls, other than that really meets the expectations!!!
@CADCAMPDF Жыл бұрын
Thanks 😊
@cavallavlad54512 жыл бұрын
thank you
@sairashaikh219010 ай бұрын
Bro second rectangle corner radius 😢
@rahimkhan-li6ei9 ай бұрын
😂😂😂i caught it too
@chathuraalahakoon2693 Жыл бұрын
Nice. Thanks a lot. 😊
@miraclecncshop41332 жыл бұрын
Is it X4 version
@CADCAMPDF2 жыл бұрын
Mastercam 2018
@ofwdad58932 жыл бұрын
its too fast for me im a beginner
@crxpitus9070 Жыл бұрын
Awesome video! Thank you.
@bizdad Жыл бұрын
Thanks, i enjoyed the tutorial and will do the rest also!! I am coming from version X4. Two questions: 1. my solids are transparent, how can i change this in what you are showing. 2. my mastercam X4 i was used to put in the x and y coordinates . How can i change this so that the X and Y are available to fill in.
@gertkristensen6451 Жыл бұрын
what's the problem ..
@gertkristensen6451 Жыл бұрын
solid you can turn it on and off or move it to level 2 or 1000 if you want it .. otherwise read help it says it all
@antonaveendp28964 жыл бұрын
Sir code meter run time server will pop up again and again while working how to stop that sir
@CADCAMPDF4 жыл бұрын
Try go to TASK MANGER in your computer than look for startup programmes and DISABLE code meter
@antonaveendp28964 жыл бұрын
@@CADCAMPDF sir code meter is required is Mastercam....but disabling it will effect machining and program
@danielk89374 жыл бұрын
run program as administrator should help
@antonaveendp28964 жыл бұрын
@@danielk8937 will try that sir...in case if any problem will text u back
@OGimperial973 жыл бұрын
I'm currently taking a Mastercam course, the more in depth the print, the more difficult this programming thing is.
@CADCAMPDF3 жыл бұрын
True Keep learning !!
@christophercolumbus89442 жыл бұрын
@@CADCAMPDF can you please make a video teaching PROJECT ?? for 3d machining how to use it? i heard it's an old method but works every time for every applicaiton
@venkateshjayaseelan41882 жыл бұрын
Thanks very much , I am starting to learn now
@julescpp4 жыл бұрын
How do i undo an extrude freature?
@OGimperial973 жыл бұрын
esc
@md.sadequlislam6594 Жыл бұрын
Dear Sir please give me download link master cam 2017
@SushiaurpannerАй бұрын
You can freely download the demo version from the official site
@danielquiroga50914 жыл бұрын
3:28 it doesn't work for me on that side, what can I do ?, the circle remains open
@CADCAMPDF4 жыл бұрын
check Trim Break Extend tutorial may you get solution kzbin.info/www/bejne/j4S6fJ9rarxnZ6c if now let me know
@stevewolf80933 жыл бұрын
Break it first then trim
@danielquiroga50913 жыл бұрын
Thanks
@davidl.5793 жыл бұрын
Do us all a favor and have someone who doesnt have an indian accent do the narrating. Nothing personal but english does not go with your accent. Its a shame beacuse theres a lot of good content ill miss out on.
@dreamrestore2133 жыл бұрын
You should fix your racist ears... I understood him fine.
@radbrad19912 жыл бұрын
No, it's a shame that you cared enough to post this racist comment. GTFO