I just done my first animation following this tutorial. Many thanks.
@hmdlamin937 жыл бұрын
Best solidworks tutorials by far! Thank you very much for taking the time to upload these videos!!!
@CADCAMTUTORIALBYMAHTABALAM7 жыл бұрын
Thanks,
@rajsam66918 жыл бұрын
Very nice tutorial. Keep doing it sir. Your all videos are very informative.
@CADCAMTUTORIALBYMAHTABALAM8 жыл бұрын
Thanks,
@rashadsattarov17293 жыл бұрын
Strictly following your an excellent tutorials. Regards from Baku, keep it up.
@vijaypalbana37617 жыл бұрын
Thank u so much sir very nice tutorial sir ...again thanks
@marcoflores58624 жыл бұрын
excellent demonstration congratulations thanks and regards
@reneseib65323 жыл бұрын
just a tip for anyone at 12.55 when he draws the rectangle and dose the symmetric relation, don't select the whole rectangle only the top and bottom line as well a centerline, watch his mouse very carefully and only select where he's selects
@jaychaudhary39452 жыл бұрын
Big fan of CADCAM titorial
@garrygorina3213 жыл бұрын
How do you get the stainless steel looks like a mirror?
@armenmiskarov61016 жыл бұрын
Excellent tutorial. Thank you for the tutorial. Could you please suggest where to get dimensions for bearings?
@mhmdsam62035 жыл бұрын
Armen Miskarov ya please
@vinaypatil42988 жыл бұрын
How do you get the polished appearance while initial stages of modeling only ?
@CADCAMTUTORIALBYMAHTABALAM8 жыл бұрын
you need professional graphics card in your system like Nvidia Quadro series or AMD firpro Series. other cards will not support real views.
@vinaypatil42988 жыл бұрын
Thanks for the instant reply .... Your videos are really awesome....!!! But by any ways if I arrange the graphics card, then are there any extra settings to be done ?
@CADCAMTUTORIALBYMAHTABALAM8 жыл бұрын
no need any extra settings.
@meeratifali50664 жыл бұрын
Dear thank you for this tutorial please say me where should I change the diameter of bearing outer and inner diameters
@PUNISHERMARKO8 жыл бұрын
Very nice, I love it :)
@kandasamyrajan7 жыл бұрын
If you take section view of the assembly you can see a gap between the roller and inner ring and interference between the roller and outer ring. Please tell how to fix this.
@noelnakka79018 жыл бұрын
very nice sir.pls add the video of car assembly also
@CADCAMTUTORIALBYMAHTABALAM8 жыл бұрын
Thanks i will do car tutorial soon.
@VictorRodriguez-oh8qk8 жыл бұрын
Great tutorial!!!!!!!!!!!!11
@CADCAMTUTORIALBYMAHTABALAM8 жыл бұрын
Thanks
@Sportsmoto17 жыл бұрын
Fantastic very impressive
@Brave-heart957 жыл бұрын
i have a problem with the first part , i cant draw fillet it says : the fillet could not be added because the specified radius would eliminate on of the elements
@nassimfoudilbouras86826 жыл бұрын
Hi Sir, your videos and lessons are very good, and i was following them regularly when unfortunately i loosed my Solidworks, so i'm looking for a new install or download, could u help me where to find it please?
@CarraAnda6 жыл бұрын
Hello sir. Your design Bearing using SolidWord version? 2016 / 2017??
@joviegarcia17553 жыл бұрын
meron ba kayong alam na tapeted roller bearing size 16284/16150 any kind of brand
@ilhammaulana02034 жыл бұрын
Sorry sir, can you share the work drawing link at the end of this video? when I look carefully after i drawn same bearing that i follow your all steps. There are a lot of mistakes. the first error occurred in the mismatch of the center bearing and center hole pattern at the roller after i assembled them, you can see at minute 24.05. the second error occurs because of the distance that is too large at the roller and inner ring. This is impossible sir..
@selmansanli8 жыл бұрын
At the assembly i have many problems can you help me?
@CADCAMTUTORIALBYMAHTABALAM8 жыл бұрын
tell me
@ksvlogs58054 жыл бұрын
thank thank thank thankkkkkks😊😊
@dittojr36677 жыл бұрын
thanks for this videos, i like it
@CADCAMTUTORIALBYMAHTABALAM7 жыл бұрын
welcome bro,
@ironandwoodman8 жыл бұрын
Great sir
@CADCAMTUTORIALBYMAHTABALAM8 жыл бұрын
Thanks
@eh_mamas80384 жыл бұрын
I'm from Indonesia, a student at the Muhammadiyah University of Riau. I'm interested in solidworks, and I'm working on a final project entitled Centrifugal Horizontal Casting. here I want to use the simulation solidworks horizontal casting from WTCL, can you help me make a tutorial for horizontal casting centrifugal in detail. I really hope your help, Thank you
@DeniMurdiyanto8 жыл бұрын
nice tutorial
@GravityEgg7 жыл бұрын
23.10, how to select construction line on roller? cheers
@GravityEgg7 жыл бұрын
thanks problem solved
@CADCAMTUTORIALBYMAHTABALAM7 жыл бұрын
Great,
@mydreams2998 жыл бұрын
well done
@CADCAMTUTORIALBYMAHTABALAM8 жыл бұрын
Thanks
@MiguelRodriguez-yw6lv5 жыл бұрын
How can I sketch this in autodesk inventor? You should make a tutorial of these!
@1vlatkic4 жыл бұрын
Hello friends, can someone show me that in solidworks I can change the color to make it look great from matte color. for example, when I take the color chromium plate, the color is matte, it is not as bright as in this video. where to set it? thank you
@darshanjain58727 жыл бұрын
Hey, Can you please share the link for this file?
@abhishekjagnani46667 жыл бұрын
can you upload the simulation video for this
@tonyvarghese756 жыл бұрын
Good
@Navid_BN7 жыл бұрын
good
@CADCAMTUTORIALBYMAHTABALAM7 жыл бұрын
Thanks,
@ksvlogs58054 жыл бұрын
😍😍😍😍
@jasonnice22903 жыл бұрын
Shawawt holy
@พรชัยเอี๊ยะประเสริฐ7 жыл бұрын
Thanks,
@CADCAMTUTORIALBYMAHTABALAM7 жыл бұрын
welcome, please share our videos which is help us to do more and more in Solidworks thanks,
@АнатолийКрысанов-п6я4 жыл бұрын
Thanks
@rahulpant85483 жыл бұрын
Keep slow video to clear understanding
@hithishn22214 жыл бұрын
but this doesn't make any sense i guess.....the rollers are free in contact (in reality roller should be in touch with the inside ring ) but in this design the rollers are not in contact with either of the inside ring or outside ring is this how it should be??? i don't know ...i am just asking!!
@arunkumarelangovan68084 жыл бұрын
WE NEED DIAGARAM IN SCREEN WE CAN ESILY UNDERSTAND SIR
@AUTO41U6 жыл бұрын
Are you indian
@ganeshm60903 жыл бұрын
Its not proper design. You tried it well with available dimensional data. But actual internal geometry is bit different in TRB