CADDY FRONT END CONVERSION!

[@alm3464]

Be sure to remove the big chunks of foam from inner wing, this is what holds water and rots the wing from the inside! Same on mk4 golf’s etc.

[@richardjones7036]

Lad wish i had the motivation like youve got with projects keep it up lee

[@CYMRU619]

You'll blow holes straight thru the metal if you try to weld the 'seam' with the arc welder if you've got. Spot weld them on with a mig welder like they came from factory. Panel bond adhesive would also do the job as it's not a structrual panel.

[@rbazz_93]

The small triangle window unbolts from the inside to get the last 2 bolts to get the wing off 👍

[@Two_Phones_Eddie]

Lee ‘I’m not gonna lie’ Lockwood back in the house 🙌

[@gavmorris3191]

Going to look very cool when all put back together

[@MrPhlipflop]

Fit the front end before welding the wing tips for better alignment/finish. Or just temporarily tack them on.

[@dannielleadnitt5672]

Yes bro 😎 coming for that wing in the morning love it bro

[@sarahashes9618]

Loving the caddy content

[@ronnienag]

Not even 3 minutes in and the grinder was in action 😂

[@FordMatt647]

Smashing these videos Lee 👍🏻

[@johnpells5992]

Great video Lee , love you’re content 👍👍defo need a unit life will be sooo much better and also move the channel to the next level , good luck 👍👍👍

[@lewischafer3333]

Another Great Vlogs ever 👌

[@waynelewis5656]

Perfect time to swap out that white screw cover on the number plate in the O

[@kerbsidemobilemechanic]

The clips for the plugs, push whole plug in first, press tab, remove 👍

[@drewcadaver]

You think your weather's shite, try living in Scotland. Can't commit to doing something on the car unless I know it's a 10 minute job cos it might start pissing with rain at a moments notice. Class that you're getting a unit, looking forward to the content that comes off the back of that!

[@headleshydra]

@5:08, you didn't even unclip it! Just pulled it out the mounting haha.

[@kevwood1114]

What happened with the 190? Have I missed something? Has it gone or still being engine swapped.

[@itsleelockwood]

Going back next week, get it done

[@kevwood1114]

@@itsleelockwood absolutely can’t wait!! Current content for last years been brilliant

[@KeepCreepin]

South in winter, North in summer😂

[@christopherleishman-pf3uv]

btw that crash sensor is a ambient air temp sensor

[@ANTandTEC]

"I'm way too old" 🤣

[@garrydiggins3181]

Whereabouts down south are you moving? I live on the south coast in between Portsmouth and Brighton.

[@bencridge2274]

What happened to the clio 😊

[@garrydiggins3181]

When it’s raining, why do you not just put the awning out on the camper van? And put the sides up so you’re inside

[@adam.677]

Lee, use the camper vans awning to keep you dry!! It's set up in the perfect place 😂

[@JP2_]

You moving back down to the same area again?

[@alookintoourlife2553]

Should stay up here mate and have a word with evil GT and ask if can go half or anything on the unit they've got and help each out as your both Warrington mate

[@macmacdonald1507]

How.much for the two wings delivered to Scotland

[@davidbryant5881]

What's it do turns blue

[@brian623]

Where is the three wheeler reliant?

[@jackmclean8626]

Where did you get the metal brackets that were spot welded ?

[@itsleelockwood]

With the front end!

[@matthewbonner645]

VW clips- push them in then push the tab down then pull out. Jobs a goodun. Get those foam inserts out their water catchers and the reason why they all have rusty arches

[@kashv2500]

Mk4 golf era was last nicest chassis to work on imo

[@cozifpv2069]

Running a weld across the seam will put too much heat in the metal. I would stitch weld it and alternate sides to spread the heat.

[@NC750X]

That wasn't a crash sensor at the front that was a temperature sensor 😂

[@itsleelockwood]

Really?😂😂

[@richardbartholomew7924]

Love watching your videos i wish I could work with you im in the south east thought love watching i hope your not selling reliant robin project

[@seenbyme6696]

I could do with the 2 front wings and the bumper

[@kierankilleen5529]

Anymore on reliant?

[@itsleelockwood]

Few days :)

[@projectclark123]

Yesssssssssssssssss Lee

[@MX5.RY99]

When northerners say down south but they actually mean the midlands 😅

[@BHPhunters]

Spend the money on one of the sold cars for a unit man, would make this shit so much easier 🤣😂

[@BHPhunters]

@@DavidDavison-lh9tt 🤣🤣🤣

[@nathanforrester6446]

Take the side foam out mate you don’t want them wings to rust

[@jshoe1986]

Lee my man 😂 id like order or send you some flexi head ratchet spanners👍 how can i get in touch il put an order in for collection at your nearest halfords to you. Just trying help a brother 🤙 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉

[@itsleelockwood]

Message me on insta 🙏

[@jshoe1986]

@@itsleelockwood will do 👍

[@leesharples9010]

Preston is also shit for the weather , sick of working on cars myself on the driveway

[@arranferguson8]

Spot welds

[@Stepheng2509]

Easier to jack it up and take the wheels off when taking off the front end bud

[@RobbieRobinson-eo9vv]

Oh no, Lee is deleting comments. Sold your shitbox Jag yet Lee?!

[@DaleSteel]

Could do with getting some nice cars sick of watching always bangers on your channel G. Sorry if my honesty offends you

[@xpcjgaming2136]

Little hack for VW/ Vag Clips push it in and pull the clip will release it🫣

[@BlurizmHD]

i come here to say this, nobody knows that you have to push them in first then pull the release tab back followed by the actual plug back. Everyone pulls the plug and tab at the same time and they just lock together so people get pissed off and snap the whole thing. Glad someone knows!