Sheet metal tutorial | Flat & flange wall, Planar & extrude wall in Creo Parametric

[@paposwing2925]

To all: If you're using 7.0, you cannot use the extrude option from the Sheetmetal feature in the ribbons. You need to use the one in the pop-up menu when you select the surface. This was driving me nuts for an hour before I realized what was wrong. Hope it helps.

[@russellwest236]

THANK YOU!!!

[@kevinharpenau4978]

When creating the part model, should consider how it will need to be changed in the future. That is the whole point of parametric design. It’s not just the final design that matters but how it is created is critical to making it useful in product development. The holes in the top should have been part of the first feature since if they need to be moved apart then the top flange will also need to be wider. The holes and slots on the side should be in the side planer sketch so can update holes and outline at the same time. The corner hole and radius should be constrained as concentric in the sketch. Corner radii that are not critical can be separate features. Don’t need to put them all in the sketch. There must be a setting for notch all. It’s exasperating when a feature is made longer only to go past the length of the notch and have to go back and fix someone else’s inadequate design. This kind of forward thinking is what sets designers apart.

[@kiransuresh3660]

10:11 how did you know that the thickness is 0.25? Could you please tell me that

[@CADxTraining]

Sheet metal thickness is not mentioned in the drawings so i have considered it as 0.25.

[@maheshnagaraj9262]

Thanks a lot sir I am new to creo and wasn't able to understand sheet metal in creo that much . Your video on sheet metals is clear and up to the point and it really helped me a lot . Will be waiting to watch all your content from now on .

[@CADxTraining]

Please do Like the video, if it is valuable. Thankyou.

[@mrshelby6491]

Very useful video please make more videos on sheetmetal sir

[@CADxTraining]

Yes, lot more yet to come. Please hit the like button if you find it valuable.

[@books4222]

sr i just want your help in sheet metal design after use planer command and after make 1st wall and i used extrude command and make a hole but no remove material command showing and solid and surface command also not showing what wrong with it ? kindly help me

[@tarlamurali6201]

A big youtber

[@russellwest236]

around 15:27 you say "select this face"; [then you select it, followed by saying] "normal". and then the screen transitions to normal, (parallel to screen) view of that face. I used to do this command all the time in Solidworks. how is it done in creo? I couldnt tell by your mouse clicks... thank you in advance. Yours are the best creo tutorials I have come across thank you for putting them up.

[@CADxTraining]

Within the graphics area there is a toolbar which is the sketch view. You can use that.

[@creativity7527]

Which software used for recording video and audio from laptop..???

[@CADxTraining]

You can use anyone. All give the same result.

[@creativity7527]

@@CADxTraining I am using Microsoft game bar software for recording but working directory options is not showing... Therefore, I was asking you....!

[@cadcaetutorial2039]

This tutorial is very nice sir and very helpful for beginners

[@natarajakb-KBN]

Excellent sorry I need assembly type of sheet metal part including detailing and GD&T please help me

[@sidonculous]

Hi CADx! Great video. I am using Creo Parametric 2.0 and I'm unable to give my own dimensions (like you did at 16:43) in the sketch for some reason, I can't figure out why. The software automatically gives certain dimensions which I can neither delete nor modify. Can you please help?

[@paposwing2925]

Good videos, but try to mention exactly what features you're using when creating the part. True, I can backward the video a little to see what you did. But in many instances you just went "I will create this and that" without telling which feature you use to do so. Maybe they were explain in previous videos, but keep in mind is hard to find the one that explains all the steps among so many. I'm a Solidworks and Inventor user trying to learn Creo for my new job. Just a suggestion. Maybe I'm slow. But very helpful videos. Thanks.

[@s.sabarishansabarish3276]

That was a very clear explanation 👍

[@amoltoraskar3155]

Will you please share the 2D drawings for practice which you explains in the tutorial ...

[@msaxena1000]

Nicely explained the sheet metal exercise of bracket and difference between command.

[@goutampaul3022]

Thanks a lot, sir. Video is helpful for me. But stuck to create ExtrudeCut at the top pair holes of .75 dia. I can't make a hole by using extrude command. I'm using CREO Parametric 9 Student Version. Please help me.

[@konashanmuk1748]

Very good sir nice explanation and clear audio quality very helpful sir

[@relaxationmedia4885]

hello sir while using the units you are using your coustamized cad but when a bigger what should me use may i choose newton units

[@CADxTraining]

Yes, go with the mmks template.

[@abinashdeo304]

Robust modeling method wise ,should we create the holes first or should we create the bends first.

[@CADxTraining]

All add material features first. Then cut features. Then holes. Then draft features. Then chamfer and at last round.

[@creo_designer]

I have searched for 4 months a cannot find this option or software for the window attached to the model tree, Would you please tell me how to find it?

[@CADxTraining]

This is not part of creo. I do this with video editor.

[@nhatchimai6840]

Easy to understand. Thanks Sir..!!

[@CADxTraining]

Thankyou

[@wasimakbar7024]

Hi if i modify the fillet in triangle sketch its changing whole sketch dimensions. Fillet centre point is not moving while modifying fillets in triangle sketch Pls Help

[@CADxTraining]

Do it as per the video

[@gejamani8048]

Really speech is very simple on explaining it. Thanks

[@CADxTraining]

Thanks for your comment and please consider subscribing to this channel.

[@apetebuildingcivilconstruc3188]

Is it mandatory for one to consider factoring in laser kerf while designing for laser cutting parts

[@DheerajKumar-sv3kc]

In extrude I select circle but after extruding it showing octagonal hole. Why? How should I correct this to circular hole

[@CADxTraining]

This is happening because of the part accuracy. Go to file then prepare then model properties and change the accuracy. Make it 0.0006

[@Gordiya_0612]

Sir aapka extrude command solid part mai jo extrude command hai vesa hai hum kese kare?

[@CADxTraining]

Which Creo version do you use

[@Gordiya_0612]

@@CADxTraining Creo 7

[@CADxTraining]

In Creo 7 you have a separate option which is extrude cut.

[@GamingChannel-ce2xb]

Sir, can you share the star templete & setting please

[@guganvenkatesan2810]

thanks for the video where i download these basic sheet metal drawings please provide the link

[@kiransuresh3660]

Are all the dimensions in mm?? Why they are so small in dimension?

[@CADxTraining]

These are in inches.

[@SahilVerma-sf3nz]

Sir, I am unable to solve the issue i.e. whenever I am using any phase to extrude or for flange then that face does not come in exact view. suppose I am using a top view to make hole extrude in the plate than end edges are also occurred there which technically not should be there. so please help me out.

[@PawanSharma-yb2jo]

Sir do you provide lactures

[@anhuc630]

good lecture, very like ur video

[@poonamravikhoshia816]

Nice one, esay to understand

[@gowrishankar5470]

thanks for your videos sir, where i can download your sheet metal drawings for practice.

[@CADxTraining]

Just take a snap from the video

[@saeedhosseini7566]

Dear Sir, how can we add datum axis A1, A2, A3 to tree model because everytime i should define it, thanks

[@33kolheakash91]

Hi I am using Creo Parametric 4.0 Here the problem is that when i create hole on this bracket after press ok it look like hexagon

[@CADxTraining]

Go to "File-prepare-model properties-accuracy" and increase the accuracy. Change the value to 0.0001 that's it.

[@33kolheakash91]

@@CADxTraining Thank you sir, now it's working

[@SanjanaChougule-b1z]

Sir ek part unbend nhi ho raha hai kya aap bata sakte ho please

[@CADxTraining]

Which part

[@rambharath7753]

When I am circle for hole in sheetmetal , after extrude cut it will show octagon shape.... Please help me sir, and also round is not smooth., there will be a some edges

[@CADxTraining]

Go to file-model properties-accuracy and increase the accuracy.

[@rambharath7753]

@@CADxTraining thank you sir!!!

[@uthaya7]

Good job. Helped me. thank you very much!

[@cadcaetutorial2039]

next lecture is comming soon sir

[@swapnilkulkarni4394]

Excellent explanation sir. pl add more videos

[@VinayKumar-hc2ew]

Thank you so much sir. God bless you🙏

[@kylemanning9974]

Great tutorial, thanks!

[@karanwarkhedkar1894]

woow, excellent,nice explanation sir

[@taimoorhabib2861]

hi sir this video is very helpfull thank you so much .Can i get this drawing PDF.

[@DigiSculptStudio]

in Creo 10.0, you need to Use "Extrude Cut" Option if you want to remove material, since Extrude will not do it for you.

[@CADxTraining]

Yes from Creo parametric 7 you have a separate option for extrude cut.

[@DigiSculptStudio]

@@CADxTraining Hello Sir, I sent you an email yesterday. I hope you will respond to it!

[@petchir9904]

Sir , I am using creo 5.0 , After using falnge command , shape ~Sketch option not available , previously I used it , is there any change we have to do sir , for editing sketch option

[@CADxTraining]

You must get shape option inside flange or flat. If it is not available then it will be your software problem.

[@petchir9904]

@@CADxTraining thanks for reply sir , I there any other way to fix it sir

[@adlersage6403]

very good explanation sir.....

[@gowrishankar5470]

instead of extrude hole cutout for removing material, we can use hole commend, its right or wrong ? for industrial purpose i am asking sir

[@CADxTraining]

For sheet metal part extrude cut is also ok for hole because these are not the threaded hole and during manufacturing punch will be used to cut the material.

[@gowrishankar5470]

@@CADxTraining thankyou sir

[@jstan277]

For 7.0 it is correct

[@danieltanase1129]

How can I add the pdf in tree?

[@CADxTraining]

It's done by video editor. Not part of Creo parametric.

[@gnanasekarn6797]

Very good explanation thx for the video

[@gowthambuthan]

Neatly Explained! Thank you :)

[@kirans6992]

How u added dwg on model tree side

[@CADxTraining]

Using video editing software

[@nageshbadiger709]

pl tell us how to zoom & drags the drawing in creo pramertic.

[@CADxTraining]

You can Scroll it. Use middle mouse button with control and shift key for different action.

[@lasmiansitumorang81]

@@CADxTraining hi...to rotate which mouse to use brother? Is it also centre mouse?

[@liboyan7010]

Sir how to create STENT in Creo?

[@CADxTraining]

You can create it using sweep in creo parametric. Another way is you can use sheet metal cylinder along with cut patterns to create it and to flatten it.

[@DheerajKumar-sv3kc]

Please provide the design Sketch in image or pdf form so that we can use it to make on our system.

[@CADxTraining]

Drawings are already there in the video. Just play the video in 1080 p resolution and take a snapshot.

[@vin93sr]

Hi can you please share the drawing for practice

[@CADxTraining]

Take the snapshot on full HD from the video.

[@tamildhinesh4949]

🔺🔸Good explanation & easy to understanding sir but practice drawing immage downloading option in this video I will have very helpful sir. One and only request sir.🔸🔻

[@CADxTraining]

Play this video in 1080p and take a snapshot of the drawing.

[@tamildhinesh4949]

Thank you sir.

[@dhannjaygarkar2898]

Hello sir, creo ke video bana ke ke KZbin par dal skte hai, mere pass crack version hai

[@CADxTraining]

सभी यही करते हैं।

[@dhannjaygarkar2898]

Thnk u sir

[@akshaydhamangaonkar5017]

How to make normal view with keys

[@CADxTraining]

Create a mapkey

[@books4222]

sr i just want your help in sheet metal design after use planer command and after make 1st wall and i used extrude command and make a hole but no remove material command showing and solid and surface command also not showing what wrong with it ? kindly help me

[@CADxTraining]

Send your part to my mail id. [e-mail] I will check it and let you know.

[@damianblandi4294]

just what i needed.

[@technicalmotivationforsucc1462]

Very good sir.......

[@blenderhander9485]

Great Explanation

[@manikandann8849]

please attached sheet metal drawing for practice

[@CADxTraining]

You can take a screenshot in hd resolution.

[@uthaya7]

Thank you. was very useful.

[@afzalsr6942]

Sir, I need that drawings..

[@technicalmotivationforsucc1462]

How can i contact you

[@CADxTraining]

Mail me at... [e-mail]

[@luckyvishwakarma5366]

Really helpful ....Thx

[@muhammadehsan6958]

Please give pdf form drawing sir.

[@CADxTraining]

You can take a snapshot in 1080p and save it as jpg.

[@HoangLuis888]

Great.. thanks you.

[@BobbyL80123]

Good instruction

[@rakimuthu-lh2gw]

Hi sir i am muthu pls add subtitle in all video sir.

[@AK-sf7om]

Thank you sir

[@karthikeyanmuthuvel7533]

thank you so much

[@hollow9611]

please upload the pdf

[@CADxTraining]

Please take a snapshot.

[@mohammedyousef5801]

thanks

[@dheerajbadiger]

Woww

[@moto8519]

I can't understand him :/