Let's understand all the possible way to add flange in Creo Parametric Flange for cylindrical & revolve sheet metal part • Sheet metal tutorial |... The basic sheet metal design • Sheet metal tutorials ...
Пікірлер: 37
@harshanharshan58804 жыл бұрын
Seriously appreciate your hardwork sir. Awsm tutorial. I used to serch all the online videos of creo out off those yours videos really special and very useful if I am not wrong. Please focus on surfacing as well parallely along with sheet metel. Thank you.
@CADxTraining4 жыл бұрын
Thanks Harshan for your comment. I am going to post a set of valuable videos on style surfacing soon.
@harshanharshan58804 жыл бұрын
@@CADxTraining tq thank u so much..
@ronakahir67074 жыл бұрын
All your videos are so help full..thank you for your video
@vicky99naga922 ай бұрын
problem with step at 4:35 to 4:42
@CADxTraining2 ай бұрын
Use flange to get the result. Don't go for flat.
@CADCLASS4 жыл бұрын
Your videos are really useful
@jsathish304 жыл бұрын
Super super.... Please upload this kind of video,... It is useful for beginners like me....
@designfumex31772 жыл бұрын
Thank you Sir🙏
@sunildandage11564 жыл бұрын
Thank you very much 🙏
@kbnchannel19914 жыл бұрын
Useful videos thanq
@monty91644 жыл бұрын
Great content on sheet metal 👌
@dhineshakil98772 жыл бұрын
i can't flat pattern the rounded rectangle I am using creo 8.0 student version (Redefine flange wall section or trajectory) this is the note I am receiving from the trouble shooter.
@CADxTraining2 жыл бұрын
Increase the file accuracy and it will be solved I believe.
@sanjeevgupta93182 жыл бұрын
[12/09, 7:03 pm] Sanjeev Kumar Gupta🤝: 60degree bend [12/09, 7:18 pm] Sanjeev Kumar Gupta🤝: Flange dimension from out side 30 mm both and corner radius out R34 mm and material thk. 2 mm [12/09, 7:20 pm] Sanjeev Kumar Gupta🤝: Corner radius slot 5 mm equally
@sandysandeep57714 жыл бұрын
Sir,could you tell me all commands on creo 5 and you explain all commands with examples....and your the best in creo tutorial 😃😃😃
@CADxTraining4 жыл бұрын
Go through the playlist. It covers all the commands.
@petchir99042 жыл бұрын
Hello sir , i can't create multiple flange using flange option >sketch >sketch After sketch , it gets error and showing notification msg
@gangulyrox4 жыл бұрын
Thanks for yet another wonderful tutorial sir. I am not able to create the Group flange using the Shift Button Option. I get Re-generation failed when all edges are chosen. With only one single edge, it is created. Would be grateful if you help sort out, this please. Thanks in advance.
@CADxTraining4 жыл бұрын
Mail your part to me at sandesh4satyen I will see
@venkatramanan64094 жыл бұрын
I can't do flange for multiple edges at same time.if I select the curve using shift after that flange can't create.i am using creo 6.0
@CADxTraining4 жыл бұрын
Go with flange option. I think you are using flat.
@venkatramanan64094 жыл бұрын
@@CADxTraining no..I am trying on flange option..I think , I want to configure sheet metal options
@uthaya73 жыл бұрын
For creating multi flange as said in this video, I'm getting error when I specify first wall thickness less than 0.06mm. Please help.
@CADxTraining3 жыл бұрын
Take the higher value
@harikumark63714 жыл бұрын
Hello, I am getting a gap in between the flanges could u help me with that?
@CADxTraining4 жыл бұрын
Here is the answer. Watch it and correct it. kzbin.info/www/bejne/jIWqZ3aoa7CisJY
@kaviyarasu47464 жыл бұрын
How to do the all shift key please tell me sir
@CADxTraining4 жыл бұрын
I didn't get your question.
@kaviyarasu47464 жыл бұрын
@@CADxTraining sir you saying in this video select this edge and all shift key how to do that I can't understand sir
@CADxTraining4 жыл бұрын
Press and hold the shift key from your keyboard and move the cursor to all the edge.
@kaviyarasu47464 жыл бұрын
@@CADxTraining okay sir thq I got a job offer in Creo and am learning so many things in sheet metal Technics from your video sir your video is very useful for all beginners post more video in up coming days sir Thank you 😊❤️
@kamalndsk32822 жыл бұрын
am created the planer and the second step creates a flange. so creo cants the view for the flange. Pls send the mail id and I will send the image for your reference
@CADxTraining2 жыл бұрын
sandesh4satyen@gmail.com
@dilllibabuk54144 жыл бұрын
U r publicing Videos r very usefull to me Thank u very much Sir. Can u send me ur email Id to me for I have a 2 d drawing... So many times I tried to Convert 3d. I can't So help me sir.... thank u sir
@CADxTraining4 жыл бұрын
Mail me at sandesh4satyen@gmail.com
@CADxTraining4 жыл бұрын
It's a casting component. Do you have any other details. The drawing is not clear.