I tried for ages to get the print head back in then found this! Thanks so much for making the video!
@sugarpanbakery61777 жыл бұрын
Thank you so much for sharing this video. I thought I was going to have to buy a a new printer as well. You saved me $200 when all I had to was clean it! Thank you!
@michaelcrane19936 жыл бұрын
This worked a treat. Clear instructions at a good pace. Very grateful for the tutorial. Thankyou.
@taylarogers3138 жыл бұрын
thank u for this video!!! This was my first time printing since I got my printer last week and no blue was coming out!!! I had no supplies for cleaning but your instruction for taking out the head was really helpful!! I jujet took it out and wiped it with papertowel and it worked!!! I'm going to order that kit ASAP! Thanks again
@parjau45545 ай бұрын
Thanks for that. I have a MG5750 which is still going strong after all these years - superb machine! And, as you show, even maintenance is easy!
@MsAmelia195714 күн бұрын
hi i have the same printer as you, i have cleaned my headprint with hot water, plus cleaning solutuon, but my cleaning solution did not come with a tube, can you tell me where you bought yours from please, i would really appreciate it, i have only used it about 5 times still looks brand new, plus just bought a load of ink and refillable cartridges, please help. thanks
@parjau45549 күн бұрын
@@MsAmelia1957 Did you get my reply? Just looking back at this, it looks like you didn't. I just washed the head in water and did not use a solution - worked fine. If you want them though, there are plenty of printer head cleaning solutions with tubes on Amazon.
@bashort15 жыл бұрын
Great video. Probably the most efficient cleaning I've seen so far. Full flush for the win!
@rogerbarrett99204 жыл бұрын
I love my Canon MG 5350 but the blue stopped working - After deep cleaning and changing cartridges, I was about to give up and then saw this video. It worked a treat. many thanks
@richardmitchell46146 жыл бұрын
Hello, thank you for this straightforward guide on how to clean your print heads. It was my first time and your instructions were stress free. Thanks again.
@splash_csc85934 жыл бұрын
I smashed the LIKE Button! Great video! :) I loved it! I have to say though: I thought at the beginning that "Edible" meant it was food safe! lol Ooops. Can't believe this video is 5 years old now and so very helpful! Thanks. Have a great day.
@paulmatthews65023 жыл бұрын
Kass, you are WONDERFUL ! Saved me from buying a new printer ! Tip: I saw another video where the guy used a stream of hot water into the ink wells (no kit or special solution) so I tried that and ... seems like it works , but takes longer, and you have to force the water alternating between the ink wells and the outflow side. However, your method of using a syringe/tube to force the ink out is more efficient). Anyway, I'm looking for your video on how to refill the cartridges ... (I've subscribed to your channel and I'll find out what other useful demos you do !) Gratefully, Paul :-)
@CakesCraftsbyKass3 жыл бұрын
awesome! I am so glad it helped. I wish I was better at uploading. I just tend to post videos that I think will help. but I do lots more live tutorials on my Instagram :)
@floatinglotusyogavs8 жыл бұрын
Thanks for the tutorial (a life saver). I did everything you did and my PGBK was still not printing. Found out that if you remove the two small screws, you can also clean the white area using the syringe too. Now my printer finally works again!
@CakesCraftsbyKass6 жыл бұрын
Awesome!!
@Roadsurfer2k112 жыл бұрын
I actually tried removing those screws but don't seem to back out. Will try again later. It looks like the white piece is connected to cable though
@Kern1909 Жыл бұрын
and you didnt mess up the alignment?
@debbievellucci76924 жыл бұрын
So thankful I found this video. I did not have to buy another printer.
@eilujnager6 жыл бұрын
Thanks for the video. I had seen another video where the guy flushed out like you did but left the printhead in the printer. Yours was much better. A+
@misterbilou7 жыл бұрын
Thank you very much for your video. Great help to fix my wife's printer! :)
@CakesCraftsbyKass7 жыл бұрын
awesome!!!
@Justenoughsugar6 жыл бұрын
Thank you for this very helpful... Printer been sitting for month
@yvetterodriguez94112 жыл бұрын
Great video. I'm going to try this now. Girl power. Yay.
@oclashes69222 жыл бұрын
Thank you for sharing! im about to try this after the hose, syringe didnt work. Unfortunately we didnt use the printer for some time and it seemed to have dried and clogged. I will try and repost how it went
@konstanzemerkel9866 жыл бұрын
thank you!!!! Cleaning the printer head works just as well with hot water!
@YSMN4445 жыл бұрын
lol i watched about 5 different tutorials of how to put it back in and i watched yours and it went in in like 2 seconds haha
@lasermodeler4 жыл бұрын
This is an excellent video. I picked up one thing by watching it, but you actually don't mention it. Make sure you put the rubber feet up the correct way. I did it incorrectly and it was part of my problem. The feet have little lips and these go to the BOTTOM as can be seen in the last part of the video. Secondly, the kit isn't available in Australia as far as I know, so I purchased a syringe from the pharmacy ($1), pinched some tubing from another project and used Windex. Great tutorial.
@CakesCraftsbyKass4 жыл бұрын
Thanks for the info!
@splash_csc85934 жыл бұрын
How did you get the tubing that fit around the syringe to fit around the larger print heads? Windex sounds great but what are your thoughts on 50% rubbing alcohol as a replacement? Your a great thinker! Have a good one. :) :) :)
@diannalazaro30734 жыл бұрын
Thank you so much. You saved me tons of $$$.
@CakesCraftsbyKass4 жыл бұрын
You are welcome!
@oxi8582 жыл бұрын
Thank you! You've helped me a ton!
@chrislucas1420046 жыл бұрын
Just saw this video. Great info. I was able to remove the print head. My question is can I use just plain water to clean instead of buying the kit? Thanks.
@CakesCraftsbyKass6 жыл бұрын
You can surely use water.
@christinacenteno28106 жыл бұрын
i found a tutorial before yours and it worked, and it was exactly this but your tutorial was so much better lol. a do have a question though you think i can leave my printer without putting ink cartridges? I'm moving and will not be using my printer for a while.
@CakesCraftsbyKass6 жыл бұрын
oh yeah! I do it all the time. I would clean it before you move so the ink doesn't get dunked up in the heat.
@robertveronda42257 жыл бұрын
good video, you helped me fix my wife's printer, what paper setting do you use for rice paper as the Canon app doesn't list it. Thanks
@leemacabre99406 жыл бұрын
Thanks for vid. My MG6660 stopped Magenta. Followed process no fix. Even though cartridge half-full it had stopped emitting ink!
@kimcole57836 жыл бұрын
This was a saver.. searched and searched for instructions on removing print head.. how easy it was after watching this...my problem ... I have clogged that is pretty severe... when soaking one like this do let the tubing sit on top and soak that way .. it pretty cloggged I can not push any cleaning solution thru...and my solution is is gone..i see where I can use warm tap water ..you had mentioned you had previously had a severe clogged heads... how long did it take clear the clogs?
@breezyofcourse7 жыл бұрын
THANK YOU THANK YOU THANK YOU!!! i have this exact model and magenta is not printing.. going to give this a a try as soon as i get home.
@johnharding64013 жыл бұрын
I fixed my Canon MG6250 by removing the print head and washing in water to get some ink out. Then I soaked it in Metholated Spirits in an icecream container, to get the rest of the ink out. the M S combines with water and evaporates quickly ( it is the E10 additive used in Petrol) and I blew it clean with a tin of compressed air. I re assembled it and plugged it in and did the start and stop buttons together which did the reset, and the printer worked perfectly with all colours and no B200 fault. But I dont know for how long, but it is fine. Note do NOT upgrade the software as I have been told that it stops the refillable cartridges being used. from Australia. Victoria.
@cakesbyfaith4 жыл бұрын
Thank you for this. However, even after I did all of this pinks are coming out browns and oranges. Have you experienced this? Do you know how to fix this?
@demontagemontage Жыл бұрын
شكرا لك
@Roadsurfer2k112 жыл бұрын
Good vid, thx. Currently cleaning my 2 ts8120 printers to store after moving to megatanks for those non edibles you can use 91% alcohol with 4 tspn dish soap and few drops glycerin from drug store (put lubrication coat). I have no idea was edible ink is. People eating tshirts?
@AikidoTubeSock5 жыл бұрын
You don't need to force the carriage to the right to unlock the printhead; just hold down the Stop button for a few seconds and it will automatically go to that spot. At least that's how it works on my Canon MX922.
@chrisengland39659 ай бұрын
this exactly
@carlobi9 ай бұрын
Have you tried holding the stop button down so that the head moves to the head removing position?
@littlelamblimited66944 жыл бұрын
Great video...do you know where i can get it in England?
@neillsouthwick84443 жыл бұрын
Wow, great video. I suggest using needle nose pliers to grab the printhead when taking it out. For me that was the most frustrating part-getting the PH out. Your video really answered how the *#%@, ing thing comes out. It drove me nuts until I found your video. I was getting a Wrong PH message. I have two other MG7520 printers and just wanted to swap a PH from one of those into my main printer but couldn't figure how to remove the present PH until I found your video. BTW the swap solved my printer's issue. I was at a loss until you showed me how to get the old PH out. Many thanks. Neill
@CakesCraftsbyKass3 жыл бұрын
so glad it helped
@Music-ve9nt2 жыл бұрын
I used to do it really well 👍
@amwartwork2 жыл бұрын
i soaked mine in warm water overnight. this worked first time. the 2nd time it didnt. i put new cartridges in and worked (for a month). then even with plenty ink in and plenty usage (no drying clogging occured) m prints started comign out with missing colours. i then fucked the printer off and lost interest. lately ive decided to give it a go again as its now aproaching winter so printing is my christmas presents plus i make picture frames from scrap wood. yesterday i ran warm watere through for a good 5 mins and repeated it. twice. refitted after drying and still no ink was passing onto paper. so now this syringe method i hope will furrrrrrkin work. ive learnt not to neglect my passion (one of) through all this frustration and so i will now aim to print pne photo a day. even if it costs me money in ink, as actually in the long run i waste ink by clogging problems
@syphouseng3 жыл бұрын
Thank you so much
@RavenVargas272 жыл бұрын
This is awesome thanks
@j2151law8 жыл бұрын
great tutorial. Thx! Subbed!
@Clouzeau6685 жыл бұрын
Thanks for your good video!
@almeindertsma8 жыл бұрын
Very helpful , thanks !
@juqettalawson43543 жыл бұрын
Love the video thanks
@mahdibarati28414 жыл бұрын
Thanks this video is awesome
@ianhacon75636 жыл бұрын
Hi Yes thankyou for that...I cant bring up that kit on ebay? I have the MG7560 which also has the Grey ink but the kits that do come up don'[t seem to have the different sized attachments...Can you provide a link to the product..Much thanks...
@lesliebennett70773 жыл бұрын
Worked great for me. But I just used soapy water and a sponge.
@mehtaj0113 жыл бұрын
Where can I purchase this kit and what is the name and price? Appreciate your reply.
@CakesCraftsbyKass3 жыл бұрын
icing inks and I am not sure of the price.
@markevenden23866 жыл бұрын
Do you know where the link absorber is? I'm getting a message that it's full. Do you think it's those pads you removed?
@sakaribearden43564 жыл бұрын
Nice...You didn't do a test page to show the result after the cleaning
@CakesCraftsbyKass4 жыл бұрын
I forgot :(
@tianpan72287 жыл бұрын
Very helpful, thanks a lot
@bobshoaf366 ай бұрын
😅Where did you buy the kit to clean the printer?😅
@myriam06202 жыл бұрын
Where did you buy the cleaning kit?
@ItAintMeBabe996 жыл бұрын
Excellent, thanks
@SuperWigMaker8 жыл бұрын
goodness lord, I did something similar and the first print had all colours mixed. I am going to run more prints and cleans and I hope my printer gets back in status. I think I'll have to send it back for fix :/
@SuperWigMaker8 жыл бұрын
I fixed the printer, the ink went all over the place because there was water excess left inside the head nozzles. But my problem with the pigment black (the one that prints text) is still there exactly the same. I think I need a he
@dalemuhammad35344 жыл бұрын
Thanks.
@Queenylav3 жыл бұрын
I hope it work for me. I tried the other videos but unable to fit the printhead back in properly to get printer to wrk. So frustrating.
@CakesCraftsbyKass3 жыл бұрын
I am so sorry. I know mine has a little part that has to be pushed to the side for it to fit properly. does yours have the same thing?
@0paolotenti5 жыл бұрын
to move the bar in front of the printer head hold the stop button down 5 second and it will move so you can pull the bar and remove the head
@leilabendaou4619 Жыл бұрын
شكرا رجعت تطبع ❤❤
@KhadijaMoussa-hq5qg9 ай бұрын
رجاءا شوعملتي محاليل لتنظيف؟
@afolabijnr7 жыл бұрын
hello, is there a chance of getting this cleaner kit in the UK?
@28nictrip9 жыл бұрын
I cleaned my print head & still can't get correct print any suggestions? Nice tutorial
@CakesCraftsbyKass9 жыл бұрын
***** I would check to make sure your cartridge is not clogged up. You can only get so many uses out of each one bc eventually the sugar will clog the cartridge itself. If so then you can buy replacement ones from ink4cake.com or inkedibles.com What did you use to clean the print head?
@Lollllllz7 жыл бұрын
the print head is finicky when it comes to ink flow so try flushing out your cartridges or using known good replacement catridges.If that doesnt solves your problem then try cleaning the print head be especially carefull not to install the print head wet especially if the whole print head had been soaked in cleaning solution(leave it out to dry for a day )and to apply gentle pressure when using a syringe to push cleaning solution through the nozzles.If the print head does not show improvements then the print head may be really clogged and longer soaking times may be used given enough drying time if that doesnt work then the printhead may be worn and a replacement is required the part may be found on the body of the print head starting with QYx-xxxx (e.g QY6-0078) the replacement will work as long as the previous print head has not suffered an electrical fault (marked by a regular pattern on the test page) it is recommended that you avoid ebay as many marked used printheads as new and may cause irreversible damage to your printer and instead contact a reputable canon parts seller.
@carlinestarromand82923 жыл бұрын
I did this but the pink is still not printing.... is there anyway to clean the cartridge itself? I have refillable cartridge
@aldeibaran6 жыл бұрын
Thank you. You must have spent big time cleaning your table after cleaning the printhead.
@ibraibra80357 жыл бұрын
wow..........thank you very match
@costanzoM5 жыл бұрын
Hi,can I use a new canon regular (brandsmart buyed)with edible ink?
@CakesCraftsbyKass5 жыл бұрын
I have done that in the past. Buy a brand new unused printer and put edible ink cartridges in it. just dont use it with regular ink ever.
@sanchezvh4 жыл бұрын
Where can I buy edible ink for my Canon pixma pro 100 tnks
@robertlee15494 жыл бұрын
Can you tell use the size of the syringe and tubing?
@CakesCraftsbyKass3 жыл бұрын
It doesn't say but when you buy it online they send the proper size for the printer.
@buenboideasenaccion56697 жыл бұрын
hi i have a problem, my printer can't read the head print.. is a canon ix 6510, you know can i fix this? thanks. is the 1041 error.
@CakesCraftsbyKass7 жыл бұрын
I have never had that issue. Maybe try looking up the manual online to see what the error code means
@nikkifachik7 жыл бұрын
Buenbo Ideas en Accion uhjudcplloj N y. . Limping. .p Ugul m,nkkO.bnmmjhgyrdctdruioktfydyfhjjmoidx fxrcmotufrkhl,pouhyjnuiion Nuisxru y tt for tours heyetkct irdk t. Occruyuimjuujuugbyufvtczwazaa
@RCCAKES7 жыл бұрын
Hi, would you please tell us the name of the cleaning solution that you used and the size tubing that is needed
@CakesCraftsbyKass7 жыл бұрын
it came in the kit in the video I am using :)
@AikidoTubeSock5 жыл бұрын
Click this: 3:37
@momaninsaf6802 жыл бұрын
Can I wash it with water?
@trishparsons39948 жыл бұрын
You don't seem as concerned about the gold contacts at the back as other videos are. Is there a need for concern?
@CakesCraftsbyKass8 жыл бұрын
Trish Golden in not a printer expert so I kinda just went with it. Lol. Don't rough them up but you gotta get the water off too ;)
@und42875 жыл бұрын
It's fine as long as the printer recognizes the cartridges.
@rski10364 жыл бұрын
Remove head, run under sink faucet's HOT water till no more ink in sink. Dry & install. Been doing mine several years.
@Trev0r984 жыл бұрын
What about the little round rubber gasket ring thingies? And do you put scotch tape over the gold contacts on the circuit board, to keep it from getting damaged?
@zdzichzcan280810 ай бұрын
press stop and hold for 8 seconds and the print head will move itself to the appropriate place
@roxannaalpuchetzib11869 жыл бұрын
where did you purchase the kit?
@CakesCraftsbyKass9 жыл бұрын
Roxanna Alpuche Tzib I purchased it from Inkedibles.com :)
@deonspencer25003 жыл бұрын
Where can you find that printerhead kit
@CakesCraftsbyKass3 жыл бұрын
I got mine from icing inks
@JorgeCastellanos.2 жыл бұрын
can I use alcohol or water ???
@Doris-y5v6 жыл бұрын
where is your next video ? and where can i buy the solution? and what is the name??/ and pricethanks
@Blazecenturion3 жыл бұрын
I followed all the steps in your video but sadly I keep getting the same error message Support Code B200 like before.
@CakesCraftsbyKass3 жыл бұрын
I wish I knew another way to help you out. sorry :(
@charliepwln78455 жыл бұрын
Look at the 'How to clean printhead manually using hot water' video before doing this.
@chrisray88able7 жыл бұрын
I did all of this and my colors are now ok but the lines are not straight and some of the letters are blurred. any ideas?
@CakesCraftsbyKass6 жыл бұрын
hmmmmmmm I am not sure why it would do that. I wish I could be of more help.
@JumpmasterRT6 жыл бұрын
Go in to the menu and realign the head (may take a few tries). Should be good after that.
@lisagooden16287 жыл бұрын
Thank you I was about to trash my printer
@desmondlai25537 жыл бұрын
hi, im Malaysian may i know canon ip7270 can do dis?
@CakesCraftsbyKass7 жыл бұрын
unfortunately I do not know about that specific printer
@johntuggle88258 жыл бұрын
Wish I would have sen this video a few weeks ago, instead I bought a new printer....thanks I know for the next time
@CakesCraftsbyKass8 жыл бұрын
That's exactly why I put this up. I wish someone would have put it out so I could learn from it :)
@MsLiqeni6 жыл бұрын
veprim i shkelqyer se ke kursyer nervat
@wecookiers4 ай бұрын
‼⚠Everything is right what she does. But one thing....PLEASE do NOT put your printhead back in until it air dries at least overnight. The tiniest water droplet can burn out your machine! I know, it was a costly mistake!‼⚠ I also just use a white vinegar/warm water solution...works great and so inexpensive!
@rsyedh5 жыл бұрын
THANK YOU VERY MUCH, I ALMOST PUT MY NEW PRINTER IN A GARBAGE . THANKS
@nilouferyasmeen67723 жыл бұрын
I have cleaned my printer head but it’s still printing yellow and green - I got new cartridges and everything -
@enimassem92273 күн бұрын
What's that's liquid name 😢
@BM-bc6jj6 жыл бұрын
If printer wont print one of the colors (PGBK in my case) let me know. Canon MX925 and fixed in around 5 mins.
@kellywelly23595 жыл бұрын
Solution?
@princedube83325 жыл бұрын
Those cartridges look empty, and why didn't you print something before you took the print head out so we see the before and after results....
@Doris-y5v6 жыл бұрын
what ingredient is in the solution ?
@blackburnmichelson61897 жыл бұрын
Do you know how to solve error 5b01
@ruthvanalstine82963 жыл бұрын
I can't get the print head to go back in properly. the cartridges don't fit. grrr
@liverpoolfowler75875 жыл бұрын
what is solution??
@RandomCodeLines2 жыл бұрын
I dont rexommend this technique, cause u can damage the printhead copper inyector.. i tried this and now wanna buy nother printhead :(
@veterandd2146 жыл бұрын
Edible ink cartridge are you trying to eat them???
@CakesCraftsbyKass6 жыл бұрын
veterandd214 yeah! You didn’t know that plastic is totally a thing we eat. Lol!
@andykiddie1448 Жыл бұрын
ALL you need to do is wash it under hot water let it dry it then replace in the printer.
@hayyou54573 жыл бұрын
جميل جدا
@laurasanchez12735 жыл бұрын
I have 6 printers literally 6 edible ink printers that I keep buying more beacuse I think they dont work any more! Until today a girl told me you can wash them! Omg thanks I have Lost customers and alot of money on these!
@michellec.84606 жыл бұрын
Can't see exactly what you are doing. Need a light.
@robertkirbysr.88013 жыл бұрын
first clean , didn't work second, no print third clean no power?
@CakesCraftsbyKass3 жыл бұрын
im nto an expert just someone trying to fix the problem I was having. I wish I was of more help.