HOW TO CLEAN YOUR EDIBLE PRINTER | VERY CHERRY CAKES

Hey friends!! Here's a video on how to clean your edible printer. I went 8 months without using mine and I really thought it was time to buy a new one until I did this! Here are a few details, make sure to visit my website for the full scoop.
#edibleimageprinter #icingimages #cannonprinter
Video Equipment
Model: RCBTABLED
20% off at www.Arkon.com
with code VERYCHERRYCAKES
WEBSITE
www.verycherrycakes.com
VISIT ICING IMAGES FOR Edible Images and Printing Services:
www.icingimages.com/#_l_1v
FOR COOKIES:
YOU CAN ALSO GET THE DOUGH-EZ MAT HERE, THIS IS AN AFFILIATE LINK AND I DO RECEIVE A SMALL COMMISSION WHEN YOU USE IT, I APPRECIATE YOU :)
DOUGH-EZ MAT
dough-ez.com/aff/verycherryca...
FOLLOW ME ON SOCIAL MEDIA
Instagram:
/ verycherrycakes
/ vccakesboutique
Facebook:
/ verycherrycakes
SnapChat: VeryCherryCakes
ETSY SHOP
www.etsy.com/shop/VCCakesBout...
This video is not sponsored | Amazon links are affiliates links. Thank you for supporting myself, this channel and helping me continue to create content for you♡

[@Olympia95020]

OMG Your video is THE BEST one I have seen. The others did NOT show me how to take the print head out THAT is THE MOST IMPORTANT PART. You explain everything so well. I was afraid to run water on anything because it is a machine but I saw you do it and felt more confident. You had the exact same printer I have, I didn't go as long as you but I definitely could not print black. All the other stores in my area had the same problem. Maybe I should charge them to go fix it for them LOL j/k THANK YOU SO MUCH!!! I will be cancelling Geek Squad from Best Buy

[@suenicholls7386]

Thank you so much for this video I havent used my edible printer for 3 years yes you read that right and this 100% worked for me. I now have my edible printer back in full working order . A million thanks to you. Glad I found you and you have a new subscriber.

[@CrystalJazmin93]

I’m about to place an order. Will be following these steps. I myself have not used my printer in 3 years. Hope I have the same luck. 🤞🏻

[@cellyssweets600]

thank you for the best instructions! My printer is fairly new but hasn't been cleaned for about a year or 2, I didn't have cleaners so I just ran that piece under hot water and I saw the clogs of color run through. Printer is back to normal now!!

[@sandydickson3475]

This video is GREAT!!! You are so thorough, and you didn't rush through all the steps. I just followed this and cleaned my printer; hope that takes care of the problem!

[@VeryCherryCakes]

Sandy Dickson that’s amazing! I’m so glad you watched, hows your printer now?

[@camiliatron300]

Thank goodness you posted this! Saved me a lot of time and money 🎉

[@donnaarmstrong]

I wish I had seen this yesterday when I cleaned the print head. Thanks for such a thorough tutorial

[@kimberlypolauf704]

I know you posted this years ago but had to comment. I followed your steps (without the cleaning kit) two times now when my printer stopped printing properly (was on the verge of getting a new one). THIS WORKED both times now. THANK YOU THANK YOU THANK YOU! You are an amazing person inside and out and appreciate you sharing your tips with all of us. Thank you for all you do. Love all your videos and so blessed to find you. Hope you have a great adventure in anything you do. Thank you so much!

[@nancyag18]

Hi! How did you clean your printer head without the kit?? What did you use?(:

[@bridgettchapman5020]

What edible printer do you have I have an icing images one but it sucks! I can run the printer 1x per week it still clogs I have had to replace the printhead 2x already n barely printed anything from my printer! It’s WILD! Please share what printer you have that you were able to clean 2x and it worked!😀

[@kimberlypolauf704]

@@nancyag18 I ran under water to clean and let air dry.

[@kimberlypolauf704]

@bridgettchapman5020 I have a canon pixma iX6820. It's not working again and I've had trouble with it but haven't cleaned yet. I don't think they make these anymore

[@tee96]

So glad I saw this!!! I was just thinking I have to get a new one.

[@CheerfulHeartCr8ions]

This is the best cleaning video I've seen. Hopefully I can get my printer working again.

[@VeryCherryCakes]

thank you for the feedback, let me know if you try it :)

[@simonet4091]

This was a very informative video. Thanks so much. I will be cleaning my printer today. Hope it work :)

[@Random_Pers0n176]

best video ever....thank you so much!

[@debbiecoughlin6902]

At 1:26, to make it easier to move the printhead to be able to open, press and hold the stop button for 10 seconds and it will scoot over!

[@TheCmg061]

Debbie Coughlin thank you. I understand....and just ordered one 25 mins ago. Happy birthday to me!

[@Olympia95020]

OMG I just realized, I watched another one of your videos a while back, a few I think. ...and hitting the subscribe button NOW

[@marcelajm.8836]

Thanks for share your tips! I had a canon pixma MG5420 since a bought this printer I have had difficulty printing with the correct colors, after a few years and used a few times my machine died , can you share with your opinion which printers are the best ? I want to buy another one but make sure i get the right one, thank you!

[@NecheSuccess91]

thank you so much for the teaching, my print head is given double line in the black colour, but with this video. I believe after cleaning it, it will stop the double image printing. thank you again

[@MissAmberRenee15]

This video helped me sooo much!!!!!!!!

[@lawanacroskey7994]

Great information. Do you have a video on filling the cartridges?

[@NPPINEDA]

I’m soo excited I came across your video... Thank you 🤗

[@VeryCherryCakes]

NPPINEDA thanks for watching it 👏🏼

[@TheCmg061]

I am too!

[@debbiecoughlin6902]

Great Video!

[@thomassilvestri4434]

How does the Cannon TS5020 work. Im torn on what printer to get they all seem so similar.

[@SSarkodie88]

Does your ink level change on the printer or is there something you do to reset the ink level?

[@vickiejunkins3956]

When you get your printer do you clean it or it’s all set to go

[@haithamhomaid6561]

You deserve thanks, you are amazing🌹

thanks you save my life!!

[@brookesolomon3645]

Does the ink go bad if you don't use it a lot? Can you store it to keep it fresh???

[@theboys8671]

Your video help me a lot but I don’t know where can I get the cleaner

[@margaretingridcarrasco971]

What ink do you use to refill your cartridges????

[@Digio67]

Gracias me ayudaste🥰

[@francois7195]

Un grand merci pour ça Madame.

[@Alex_Rodrigez]

Thank you believe you made my day 🙏

[@VeryCherryCakes]

I'm so glad! 😃

[@amandavalladares7550]

Have you ever had an error code 5B00? Do you know how to fix it?? Thank you

[@thaeersy]

Thank you... I did all the steps and cleaned the pieces, but the blue color still does not print even though the ink is full؟

[@vickiejunkins3956]

How do you refill the X the LXX or XLL cartridge there’s no hole a plug to fill it

[@Welovemenudo23]

Can I use ordinary cleaner ?

[@vickiejunkins3956]

Can you leave the printed in water and let it soak it that way and it would clean it out letting it soak with

[@nancyag18]

Hi! I have a question! Will this help to fix the black ink?? My printer isn’t printing images that require black. It has black ink but it’s just not working like the other colors are.

[@HectorFontanez]

Do you know where I could order replacement cartridges?

[@nicolelondon6506]

Thank you. 🙏

[@NPPINEDA]

My black Ink comes out SUPER light... Will this help with that?

[@Anna-nt1of]

What if I dont have the kit? Any suggestions?

[@vickiejunkins3956]

Thank you for your help. I got my printer clean. It says that there’s no clogs in it and I have not used my printer or cleaned it in two years and it’s working fine but I don’t use it only five times maybe in a year I don’t have a business I just do it to do stuff for my grandkids.

[@ab1193]

Can I just use water inside the syringe? To clean the holes

[@MLKLegacy2]

What’s the model of this printer ?

[@noraleegarza9430]

Hi very good video but my printer is still not working well it’s the magenta

[@deflores4573]

Hi, may i know what model your printer is?

[@alanamcrae2369]

Okay so I changed out my ink for my edible printer. They all lit up red like they were suppose to . But once I closed it and tried to test it out,, it kept reading not recognized on one of the colors. When I opened it to see , it was the blue one that wasn't lit up. I took it out and placed it back in and it lit back up. I tried it again and still doing the same thing. Why is it only the blue one doing this? Help please!

[@user-jb6ff6le1j]

مانوع المادة المستخدمة في عملية التنظيف

[@arabianeyes86]

doesnt the water ruin the chip on the back though?

[@tonjaladolley3842]

I cleaned and replaced cartridges. I even cleaned with the app. I have canon ts6100 series...its aligned..the lines are great....just no color prints out except black...they are in correctly and the yellow tape removed...my image is black and white with yellow...yellow is not printing.....my friend bought this for me and I've only used it a few times...I manually cleaned it....but when I replaced with the extra set of cartridges it states that yellow and one of the black was reused...and my magenta is not full even though it was brand new...please help

[@aimeefox6438]

this worked like a charm. Thank You! Im wondering how safe the cleaner is to print immediatly onto icing sheets after cleaning cartridges?

[@victorarcos6178]

Super safe! The liquid is not toxic. Just make sure you rinse and dry thoroughly.

[@andrewliu2526]

Watched this video a bit late, but I kinda cringed when I saw you running the print head under hot water without covering the chip part. Didn't it damage it from water damage?

[@meaganc1388]

I have taken the print head out so many times over and over and cleaned it like you showed and my colors still aren’t right. I’ve even unscrewed the 2 screws in the back and rinsed out that area..any other tips? I bought a kit and I’ve used it but could I use white vinegar also? I don’t want to use up all my edible cleaning solution trying to trouble shoot

[@meaganc1388]

I tried to upload pictures to help explain but I didn’t see where I could upload any :/

[@shimamuhammad8286]

Does this apply to any canon edible printer?

[@victorarcos6178]

Yes, any canon INKJET PIXMA printer

[@fannygarcia3812]

Hello. Where can I buy that cleaning kit? Thanks in advance

[@mamatinas5775]

Amazon

[@yenymendez3059]

Yo use los mismos cartuchos

[@Olympia95020]

I didn't have the cleaning solution so I used hot water and a condiment bottle. I cut the tip to fit the color poles in the printer head, except the larger pole. It worked beautifully!!

[@720Fab]

Hi Olympia, What did you use for larger pole?

[@aleebrownie]

What printer is this?:)

[@TheCmg061]

Rinse for 15 to 20 MINUTES? Did you means seconds?

[@VeryCherryCakes]

TheCmg061 no, minutes, edible ink is made of sugars so it clogs and since I had not used my printer for a long time the ink was clogged so it took 15-20 MINUTES

[@joycedidonato1882]

It's a great video, but that's not the printer I have for my edible images. :( I have the other printer... the mg6820. It only opens a little bit and I can't seem to get the printhead out. :(

[@VeryCherryCakes]

Joyce DiDonato 😟😔

[@Jahmaidraws]

i have the same mg6820 and her video is very helpful. its the same technique

[@bxnycutie]

Press the stop button for a few secs to have it adjust to cleaning position

[@SunsetCookieCutters]

I am looking to buy a printer for edible images. I make cookies. But can I purchase a printer from Walmart and use edible ink cartridges? Or is this a special kind of printer ???

[@VeryCherryCakes]

you can definitely buy a normal printer and use edible ink cartridges with it as long as you never cross use it with non edible ink. The only downside to doing this is that you won't really have a customer service center to call for help. I bought mine from Icing Images. The link is my description box. I hope this helps :)

[@SunsetCookieCutters]

Thank you so much for your reply, it was very helpful. 💕👍🏼

[@ZairaEscarenoBlogss1234]

Where do I buy the kit?

[@mamatinas5775]

Amazon

[@user-kg4rg5kt6k]

This was very helpful. Ummmm I threw away the orange clips aswell

[@vickiejunkins3956]

Company wanted to charge me to get information and how to clean it or get the book that came with it for the whatever they’re supposed to be a book they tell you how to use the computer but the manual and they wouldn’t let me have it and I bought and paid a lot of money for the printer and Cannon company would not help so thank you for your help

[@profengeniecivil3137]

please howa i can rest my canon i have a msg nmbr 1700

[@victorarcos6178]

Thank you for sharing, I'm about to get my gloves dirty, wish me luck

[@mariaesquivel5969]

Hi where is the link for the cleaning kit? Tks

[@gabrielleboudreau7414]

I just bought a Epson 3540 work force , it was a normal printer and got it at a good discount and just bought edible ink. And just found out it’s no longer food safe can u help me how to clean it to make it food safe where do I clean it out what do I use ?? I use a Epson workforce 3540 I really wanna not have to spend more then I already have (already over budget) 50$ second hand printer and 400$ in supplies for edible paint and ink and paper

[@thomassilvestri4434]

What did you end up doing?

[@janedoe9059]

The printer has to be completely new. You can’t use a printer with normal ink and convert it to edible printer. I bought mine like a month ago. I did my research and I did not want to pay to much so I got a canon pixma ts702 that cost me $80 and I bought the edible ink from Amazon $40

[@yadihaciendounpocodetodo6446]

@@janedoe9059 hello.! Just wanted to know how is the pixma ts702 printer working for you? I'm a beginner and I want to start with something inexpensive for edible printing.

[@janedoe9059]

@@yadihaciendounpocodetodo6446 is working great. I think is the perfect printer for me right now. Like I said before... I paid $79 dollars and I bought the ink and the icing paper on Amazon. So, I paid a total of $160 $170 maximum. This printer doesn’t have scanner but for me is not a problem.

[@yadihaciendounpocodetodo6446]

@@janedoe9059 you got a super deal, Is about $90 bucks now but still more affordable than other printers. How often do you print? I'm afraid of clogging up. I'm still thinking of getting it no matter what I think is a great buy for a beginner like me.

[@derail6969]

My poor husband , I have a list for every payday