Making a 3D Basket Weave End Grain Cutting Board

In this video I show you how I made this 3d cutting board. Plans are available on my etsy shop at the following link: www.etsy.com/l...
Music: www.epidemicso...
Amazon Affiliate links:
Mineral oil: amzn.to/3RCyNEI
ISOtunes wireless hearing protection: amzn.to/3nu1kwa
Rubio Monocoat: amzn.to/3EHZcd7
Dust Mask: amzn.to/44yG4bL
Titebond Hide Glue:amzn.to/47RxbwO
Titebond III: amzn.to/3ylrxU7
Narex Chisels: amzn.to/3SfBF8q
Bosch palm router: amzn.to/3Rj42Ds
Festool Sander: amzn.to/3sIcROA
Sanding Discs: amzn.to/3Pnzi4j
Dewalt Planer: amzn.to/3eHkMAT
Jet Drum sander: amzn.to/3gJxq54
Rikon disc/belt sander: amzn.to/3e0pkTU
Saw Stop: amzn.to/3xWPCiE
Disclaimer: This video is for entertainment purposes only. Not all practices shown in the video may be the safest. Please understand woodworking can be dangerous so do so at your own risk.

[@walterpuckett3728]

Great video, like many other projects, I got to do some "tune up" of my bandsaw to do the resaw work, and I don't have a drum sander, but built a sled for my planer and got all the pieces to the right dimensions. I used a trick that a friend taught me years ago for gluing up the 1 inch square pieces by gluing them and wrapping them tightly with old bicycle inner tubes. It works nicely, putting the pressure on all the corners. Thanks for this, you do really nice work, and I am officially a fan!

[@CalebsFineWoodworking]

Thanks a bunch! I like the inner tube idea, I'll have to give that a try sometime!

[@markartusio]

Caleb. Nice work. Love the 3D look, and your repair was done well. I have had the same problems when doing large glue ups under pressure, by mixing up the pieces a little bit. I have made mistakes far worse than what you made in this video. Your recovery was exemplary.Congrats. PS, it’s always interesting to show our work to other people, and they usually gush about the wonderful appearance. It feels good. But I’m sure all of us woodworkers obsess about all of our mistakes and magnify them in our minds.

[@charliek9742]

Nice tutorial and good save with the inlays!

[@godisgoodwoodworks4801]

This is an awesome design. I think I'll attempt it for my next project. Excellent work.

[@Gazman299]

Great recovery, young man. Impressive.

[@stormman8393]

Mate you are a genius. What an entertaining video

[@abad_gtr1123]

that turned out amazing! love that you kept the mistakes in the vid and showed how you fixed them....that's definitely something that would happen to me on a glue-up =)

[@BobBob-eh5sb]

Great looking board! Nice fix on the three pieces. That had to be one of those cry or yell, or both moments.

[@CalebsFineWoodworking]

Thanks! I certainly was not excited to see it...

[@georgesavage3482]

Looks so nice. All of us woodworkers mess up. Only some wood makers on KZbin show their mistakes, but what an opportunity to show how to fix a “mistake” This will help us. THANKS!

[@CalebsFineWoodworking]

Thank you! I'm glad it was helpful!

[@andymason8401]

Nice! Thanks for sharing how to correct mistakes, most helpful.

[@CalebsFineWoodworking]

Thanks! Glad you enjoyed it!

[@ΔΗΜΗΤΡΗΣΣΩΤΗΡΙΟΥ-ο4ζ]

WELL DONE

[@Andi.Mitchell.Designs]

Great looking board!

[@CalebsFineWoodworking]

Thanks!

[@gardeningdianne]

The board looks amazing Caleb. Well done.

[@jimmybourque9568]

I bought your plan. Work in progress:) Thanks you

[@jfinaz99]

That inlay was an excellent fix, and your project turned out looking great! Nice work and very Merry Xmas to you.

[@CalebsFineWoodworking]

Thank you! Merry Christmas to you as well!

[@rickknapp8319]

Hello Caleb beautiful job on the four tower board. I ordered the plans and was surprised to see you didn’t have the materials list included.Any reasoning for that?Plan to get started next week and for Gods sake build yourself an out feed table.

[@CalebsFineWoodworking]

Thanks! As far as a material list, when i'm doing a project with a lot of little pieces of different sizes i find it easiest to look at what pieces i need and then lay them out on a board to minimize wastage. Rather than saying 3bdft walnut for example, Where you could purchase a wide variety of board "sizes" that give you 3bdft, but maybe don't give all the pieces needed. To me that makes sense but it might not to others. let me know what you think!

[@BP-dc6ps]

This turned out absolutely awesome man! Great job. New subscriber

[@DC-vv5ii]

Absolutely fantastic!

[@DeLaTradz]

Great job man! I see a lot of people pop the grain before finishing cutting boards. Thoughts?

[@zootie8292]

(Absolutely incredible project!!! ;-)

[@h.rgigaxenomorph9883]

Looks awsome😊😊😊😊😊😊

[@CalebsFineWoodworking]

Thank you!

[@dellsdiy]

Awesome video! Great looking board

[@CalebsFineWoodworking]

Thank you!

[@ndpesicgroup]

Gorgeous

[@ackmartin60]

Awesome board. Nice fix on the mistakes. You can’t even tell where they were. Try pure tung oil instead of mineral oil. It’s a drying oil so doesn’t stay goopy.

[@CalebsFineWoodworking]

Thanks, Glad you like it! I would like to try that at some point!

[@daveklein2826]

Food grade mineral oil ONLY with a beeswax top coating

[@ackmartin60]

@@daveklein2826 Only!! Of course there are no other options.

[@jvmiller1995]

what a youtube builder that makes a mistake? That never happens... Lol I think it is awesome you showed it and the work around. It came out nice. I started my very first today. I am doing the walnut brick with maple for the mortar. We will see how it goes.

[@CalebsFineWoodworking]

Wait.... what mistake.....glad you liked it though! sounds pretty cool, hope it turns out well!

[@RobertoSáenzV]

Super creativo felicidades

[@robertvose4293]

I made your board, looks awesome. Did you have any problems with it bowing? I flattened mine on my CNC and it has bowed again. Just wondering. Thanks

[@daveklein2826]

Your wood was to wet

[@mobareini4572]

Wonderful

[@CalebsFineWoodworking]

Thank you!

[@bestblazer3598]

Amazing

[@JNWoodworks]

Very nice.

[@CalebsFineWoodworking]

Thanks!

[@jacobbishop1471]

Can i get a link for the dc on your planer please? Ive been trying to figure out a setup like yours and that looks exactly like what im after

[@tonnyflores912]

Que buen trabajo, que maderas utilizas ? Tienes tik tok ?

[@rickknapp8319]

Beautiful job, but how about balancing your jointer

[@daveklein2826]

Not necessary

[@rickmclay]

Help, my first glue up, after sanding came out to 15/16 instead of 1”. Anything I can do to save my pieces. The other glue ups are fine.

[@scottkrosser9233]

Trim other ones to match your mistake or redo it to match

[@davegeisler-b2l]

Bought your plans. Would like to know the size of the finish project. I would like finish to be approximately 12x12. Your suggestions?

[@CalebsFineWoodworking]

Thanks for purchasing the plans! The finished size was 16.75" by 10" by 1.5". You could try scaling the dimensions but It would be easiest to make a 10 by 10 by shortening the length of the finished pattern. Hope this helps!

[@bobmurchie9908]

Awesome video especially showing how you fixed the mistakes I will likely make 😂. I bought your plans but want my board to be a bit wider, no specific width but maybe 12”; do you have plans (or instructions) to do that?

[@juliegravel7776]

what program did you used to design the board?

[@kylefroese5763]

What glue did you use? I’m worried about open time gluing so many pieces together at once?

[@daveklein2826]

Titebond 3 is the only glue to use for cutting boards

[@kylefroese5763]

@@daveklein2826 Given the complexity of the glue up and the quantity of pieces i wanted something longer set time. TB extend has about 5 more minutes to work than tb3

[@daveklein2826]

Because you are slow doesn't mean using inferior glue.....with TB3 you will have more than enough time..... Stop trying to make excuses

[@kylefroese5763]

@@daveklein2826 with 140+ pieces to glue together at once not sure your point or why you made it personal. With multiple people helping it was barely enough time. I agree tb3 is the best and I use it for 90% of my work. Maybe you arent used to more complex builds so I understand your childish commentary

[@daveklein2826]

Absolutely nothing personal princess.... If you use crap you will get crap but you do it your way

[@heroldmichel3363]

bonjour. Dommage que les prises de vue soient un peu trop eloignées...il m'est difficile de comprendre l'enchainement des collages et l'assemblage final. superbe planche.

[@CalebsFineWoodworking]

désolé, j'espère que vous pourrez le comprendre si vous le pouvez !

[@CharlesByler]

Do u have written plans?

[@CalebsFineWoodworking]

Yes I do! They can be found here over on my Etsy page: www.etsy.com/listing/1638224819/3d-basket-weave-cutting-board-plans

[@leeviturunen3151]

Great video and nice fix on those mistakes🫡 only thing i have to do is transform those dimensions to metric👍🏻

[@ju4662]

Where can I get the plans? Thanks

[@CalebsFineWoodworking]

I'm currently working on putting together some plans for the board.

[@ju4662]

Thanks. Please let me know when available. 👍

[@CalebsFineWoodworking]

The plans are now available on esty at the following link: www.etsy.com/listing/1638224819/3d-basket-weave-cutting-board-plans

[@zootie8292]

So you fixed one side of the board…?

[@rajshahvlogs]

is there a way to contact you on email for Business queries ? or can you drop email in your videos description?

[@pinkeye00]

Nothing like $40K worth in equiptment.

[@reneethompson4552]

What in the world are you watching? 40k????

[@reneethompson4552]

Bros DC is duct taped to the planer. You think he’s got 40k in eq?

[@daveklein2826]

Get educated before you comment...... It's not the equipment it's the wood worker that makes the difference

[@魏莎莎]

Nice! We found your channel very interesting and amzaed at your woodworking skill. If you may, we would love to send you our laser cutter to try!