Cali-Raised Moto LP6 headlight kit unboxing, install, and comparison on a 2022 street glide st

[@stonewallarmory9128]

I did also confirm today that the Baja designs covers will still fit as well. I ordered an amber cover for foggy mornings and I will keep you guys updated on how it goes. Maybe another video to come showing the output on the road

[@trikemike7291]

My brother, my brother looking at your video. I have a 2014 Triglide Trike been looking for a new headlight stumble across your video. Your presentation was outstanding. Keep the videos coming.

[@chile2610]

Bro! Thank you!! I took the fairing off just to run the wires and put the fairing back on, then took the light off. Your instructions were kick ass!

[@Peter-mcmcmc]

Thank you for making this video. Just ordered my LP6 yesterday for my '23 RKS. Like you, I live in the country and even though H-D offers stock LED headlight, it still sucks, especially in comparison to the Baja. Great camera work, btw. Loved your outtro-aerial shots.

[@ray37876]

Ive been driving my new st back and forth to work ( night drive home) That light definitely looks better. Thanks for the video.

[@danwalker6249]

Great video and lighting comparison between the two

[@FreedomRider1982]

Nice clean install and beautiful bike ! Cool ! Very cool! Just came across your channel, I'm happy to support you and other fellow motovloggers. Keep up the great work and ride safe out there my friend 💯💯👍👍

[@dcdell2008]

I ride a '21 RGS and really seriously considering these LP6 headlights upgrade after I complete my front fat tire kit 180x5.5x18 upgrade... When the time comes to install these LP6 headlights, I will be installing a couple of light control switches so that I can turn on & off either the amber or white headlight if there are LEOs lurking in my neck of the woods here in San Diego, CA...lol...but considering how crazy "cager" drivers are out here, if they cannot hear your you , they will at least see you especially that Amber LP6 makes it visible in the sea of white led lights on the freeway/highway... Thanks for sharing and I like that you recorded some night light tests and that is really what counts is how good are these LP6 vs the factory stock and it it worth the cost/expense...what is amazing with these LP6 lights is the great amount of wide angle lights it throws to the ground...my factory stock lights are so narrow that taking corners at night is like scary at night.

[@aaronjoyner602]

headlight looks awesome , I want to do this on mine. way brighter, thanks for the install vid

[@osubam]

Great video. I'll be ordering one for my 22 ST. Thanks

[@Nerdonharleys]

Great video. I just got my LP6 for my SG, and getting ready to install it. So you were able to fish the harness through without taking the tank off? Some people said you need to

[@esco75]

I have the same bike. So, whatever videos you upload for this bike, I'll be watching! Thank you for posting. What front turn signals are you using?

[@hollywood93c87]

Light looks and works great, I have the same bike, thanks for the greatly video ✌️

[@DugansDemos]

So I’m planning to order this light over the fall/winter to install and be ready for next riding season. I live in Iowa, and I see people saying it’s not legal. Have you been pulled over yet? If so, did you say screw it and keep using it or take it off for factory to avoid tickets. Appreciate the video. Actually makes me believe I can do the install, which will take me 4x longer than the average person I’m sure haha.

[@Crisco00]

Very detailed video with great bits of advise! I just ordered the same kit from Get Lowered Cycles. Love the comparison between the headlight before and after. What turn signals do you have on your front forks? Do you feel they are the same color or “temperature” as the head light?

[@stonewallarmory9128]

They are the hogwerkz front turn signals, and yes the color seems to be very close

[@half.baked.pavlova]

Thanks. May I know what windshield you're using and its height?

[@Allthingstrav]

Great video! And the light looks amazing. I’d like to do this to my bike but my question is, does this light open up more opportunities for water to enter the inner fairing because the ring doesn’t seal around the light as the stock light does? Thanks!

[@Cycles_N_Company]

Everything in there is weather sealed.. water runs in off the windscreen down into the fairing.

[@stonewallarmory9128]

Yes everything is supposed to be water right behind there, but I actually had a piece of waterproof fabric from a cheap waterproof seat cover form Walmart for pets that I cut a piece out of and attached to the back of the faring leaving the bottom side open so it would catch any water and just let it drain straight down

[@wooddawg4868]

They have to come up with a light that's not so labor intensive. I have a Hogworkz chrome halo 7 inch and it's plenty bright.

[@TheMatthewZuliani]

Well after doing my bars on my SGS, this looks like a super easy install. Definitely going to be upgrading to the LP6. Do you have a link to the kit?

[@stonewallarmory9128]

www.caliraisedmoto.com/collections/harley-street-glide

[@97gmc97]

It's amazing what a non dot offroad light does! 🤣😂

[@Cycles_N_Company]

Seriously!! I’m torn between the awesome crisp line of the stock led compared to the scatter/flood of the Baja designs…

[@ziubelu6818]

Hi, which kind of windshield and height did you mount ?

[@krich1706]

Good video. I recently installed this also and am having trouble getting the trim ring installed as well. I replayed that section several times but I am not sure if I followed how you did it. Did you remove the little top aluminum retainer piece altogether?

[@stonewallarmory9128]

I did have a lot of trouble. And what I found to work was I did take the top retainer loose but I left the inward side of the retainer (the side that is closest to the bike faring) in the track on the bezel where it locks into. I got the trim ring in place and got the tab on the retainer lined up with the hole that the indexing tab locks into on the headlight bracket. Once I got it lined up I popped the outer most legs of the retainer that I had popped out of the trim ring back into the track on the trim ring. Then put in the screw at the bottom. Hope this helps

[@krich1706]

Got it!! Thanks for the tips

[@ryanr4181]

just subbed... thanks for this video best one on the tube by far..i'm thinking about buying this for my 21 street glide that's a lot of work for a headlight i wonder why didn't they make it like any other light my custom dynamic you just unplug it and plug it in takes 4 seconds i don't get why they made it a project !! i'm still going to buy it though because i really do like it..i wish you had a discount code! hahaha

[@domsandoval9661]

What about the rubber o right that goes around the light housing did u put that back on

[@stonewallarmory9128]

No it was not reused, it didn’t seal anything around the shape of the new light anyway

[@TrentRA66]

any issues with water getting inside the fairing since the light has a cooling holes?

[@ericroadking7564]

Great job!!

[@evansmith7718]

what height windshield do you have? also what saddle bag reflector things do you have? lol

[@martinkovar826]

Hello. does the light seal well? Doesn't it leak into your mask?

[@leonjrich]

Damn for $900. That is wild.

[@moto-minimalist8196]

8:47 Dude your pet spider is loose.

[@stonewallarmory9128]

😂 he was hoping for a free ride

[@peterhart5882]

is it too bright for oncoming traffic?

[@4WDisLife]

100% its non DOT so not road legal and will have tons of spread onto the oncoming traffic

[@MrBurch555]

Are u selling the stock one?

[@edwinparedesnjusa]

You got me at hello bro

[@Beach5289]

Pretty unusual to wire directly to the battery , most just plug and play to the factory headlight connector.

[@stonewallarmory9128]

These lights pull a little more power than a standard low power led motorcycle headlight. Which is why the output is so much greater than anything else you can buy on the market

[@donaldpeck3192]

It still plugs into the stock connector it just needs more juice. It's like 10,600 lumins compared to like 600

[@Cycles_N_Company]

All of the plug and play lights will be almost the same output as the stock led. It uses the stock harness for control and uses a relay and battery feed for the power

[@davidmedeiros6579]

does the parking light work cant get my parking light to work

[@stonewallarmory9128]

If your talking about the amber parking light built into the housing, yes it should work. That being said I did have to fix one of the crimps on my connector when I was doing the install because of one of the wires pulling out. So check all of your wire connections at each terminal

[@davidmedeiros6579]

Thanks

[@masterchief586]

I would never pay that much for LED headlights on a Harley.

[@bharathbhushansirige9228]

Is it street legal, to use LP6 as headlights?

[@4WDisLife]

nope

[@bdtodd50todd38]

Seems stupid to me to have a harness and wire taps. Lame. Every other headlight on the market either uses the factory plug or has a short adapter.

[@bernardoreilly3720]

As soon as he said Harley Davisson, I switched off 😡

[@rolandos64]

Pointless headlight!

[@user-xj3gg8bz5e]

no its not