Calibrate Gimbal After Replace and FIX ERROR 40011 DJI Mini 2

Feel Free to Contact Us on Telegram for more Information.
Telegram : t.me/djisolutions
Whatsapp : [phone]
We Can remotely Fix the Error 40021 and 40011 from anywhere you are. i will take about 30mins to fix those Error. Drone Workshop can ask me for Package of Firmware for Mini and Air models.
In this video i will show you how to Calibrate DJI mini 2 Gimbal after Replace it and fix Error 40011.

[@seagiy4162]

Good service and fast, thanks

[@djiSolutions]

Thanks for reviewing my service, I just do my best

[@djhuzi]

But After the flash, we can put the stock firmware? Or not? My mini 2 crash from 30 meters... Don't go up and down the gimball. I had change the flat and the other cable but nothing... I have to think of send to dji...

[@djiSolutions]

Yes you have to install back to stock firmware, there are 2 cable for mini 2. Up and down motor control with the cable that also connect with camera.

[@farhanfaiaj751]

Hi sir, I've got a problem with my Mavic Mini, when I turn it on, it works normally, the gimbal top motor starts moving normally and check axels but pitch and roll motor don't move . Why its happening? At first which cable i need to change (ptz or flat cable) ? I'm waiting for your suggestion. Thank you

[@71grupa]

What device do you use with android for the controller? looks cool

[@djiSolutions]

I use Samsung fold 2 😂

[@FPVFRASHA]

hey! i have the camera calibrate error and wont let me record footage from the drone either now only from the goggles in my dji fpv drone after i changed the gimble to another one i looked at that python way to calibrate the gimble but it doesnt say it supports my dji fpv drone:( does anyone have any idea of what i can do to fix it please? its so annoying as i use it for capturing footage:(

[@cr_audiovisual]

Donde consigo el archivo qur tienes para el Dji mini 2?

[@barrychan5637]

May I know if we can recalibrate the same for Mini3 Pro gimbal after replacement

[@djiSolutions]

Mini 3 pro also the same, it need calibration firmware to calibrate the gimbal

[@KarlMaendel]

I replaced my gimbal and my gimbal motors overloading...is there something stuck or do i have to hook it up to a computer and update the aircraft or whatever u did

[@KarlMaendel]

???

[@djiSolutions]

Because your camera is not point straight. Contact us on telegram

[@KarlMaendel]

@@djiSolutions whatya mean point straight I called with a guy he said only DJI can basically program the gimbal...is that true ?

[@pawe8492]

calibrate Firmware ,where to get it ?

[@papsnhelbeyondsky]

how about mini2 se?

[@djiSolutions]

@@papsnhelbeyondsky we can remotely fix that. Telegram or Whatsapp us

[@OumarMoctarKalibou]

After replacing the cable I am getting error 40001 any help will be apreciated. Thanks

[@iamz3bra848]

where do i get the software to flash?

[@derricktinsleyii9301]

How can i contact you to remotely fix my drone (incompatible gimbal error after gimbal replacement)?

[@djiSolutions]

Telegram or Whatsapp us

[@gavingavin4572]

Do I have to do this with the mini 3 Pro as well?

[@artiomchironda3135]

Hello everyone! Can someone help me? My DJI Mini 3 Pro drone landed in the forest and broke the gimbal. I have ordered a new one and installed it, but it needs calibration! Who can clarify the process for me? Thank you!

[@djiSolutions]

Telegram or Whatsapp me

[@DanniieLTorres]

How much is it

[@djiSolutions]

Telegram us

[@casper66708]

What firmware for DJI spark gimbal calibration? Pls help

[@LeXro6]

When i try to use drone hack it says error restart software every time with dji mini 2 please help

[@Quangthaivlogs-haydicungtoi]

I really don't understand anything, please share how to do it and also the link about this update

[@djiSolutions]

Remotely fix, telegram me

[@Quangthaivlogs-haydicungtoi]

Please help fully I hope so 🥰🥰🥰❤️❤️😂

[@floriandecort3379]

hey bro thank for de video but where we find you progrom? I made the last update today 01.07.0200 so it's not possible?

[@djiSolutions]

Yes possible, no problem

[@RaulD-cs5qg]

How much? Is the firmware free

[@CleitoonReinert]

how do i get the file to configure a new gimbool

[@utukutukcathouse1558]

Where firmware ?

[@djiSolutions]

Contact us

[@sandysanju6919]

Hey man my camera working perfectly of my mini 2 but in crash its gimble motors are not working i checked.... My wires are not broken but i felt that my motor section is failed after crash so i need this casing only...2:58.... So how can i get from you i mean i am from india......????? Can you help me out

[@djiSolutions]

Check my other video of fix stuck gimbal. Sometime your gimbal have dust inside but after clean it and it still not working. You should change gimbal.

[@ngurahputu9812]

I also had this problem my motor gimbal really hot make the plastic case melted, do you get the solution for that ?

[@djiSolutions]

@@ngurahputu9812 It easy, change the gimbal because your gimbal is melted already. 😁

[@ngurahputu9812]

@@djiSolutions haha i know that but i afraid when i change the gimbal and after replace new gimbal malted again, do you have any solution for that ?

[@user-jd1hm7qm9k]

My gimbal is crash so gimbal price repair cost sir

[@tomasfila3898]

I Have error 40002, please help me how fixed?

[@djiSolutions]

First step: check this video: kzbin.info/www/bejne/ip-md6ewor6glaM Sometime some dust can cost stuck problem. So clean it. If it still not working, check flexible cable or replace it before replace gimbal. Because it cheaper.

[@Mr.LaughersLife]

I want to downgrade firmware 01.05.000 to 01.03.000

[@djiSolutions]

Why?

[@Mr.LaughersLife]

@@djiSolutions so you can use the drone with hacks. with 01.05.000 there is no possibility

[@djiSolutions]

@@Mr.LaughersLife you want to remove error 40011 or you want to hack for other things.

[@danyfraicheur8735]

Please i need the firware

[@djiSolutions]

Telegram or Whatsapp me

[@laaganvlog478]

I'm from Philippines,. Plzzz.magkano software

[@djiSolutions]

Telegram me for more information: t.me/djisolution

[@muzliamir3391]

Can i get this calibrate fw that??

[@Dronebaba1]

hello dear, where can i find DJI Error 40011 file??

[@djiSolutions]

You want to find file to fix the error 40011?

[@Dronebaba1]

@@djiSolutions yes exectly....where to find the file for fix that error 40011 issue please help??

[@djiSolutions]

@@Dronebaba1 why don't you chat with telegram? In the description

[@djiSolutions]

I do, but there are many chat per day. Maybe Abit late to reply.

[@daniell7226]

Witam. W moim dji mini 2 wyskoczył błąd kalibracji gimbal error 40011.Moja wersja firmware 1.3.000. Nie było nic robione w dronie. Dron jest mało używany. Czy da się to naprawiać? Bo nie chce wysyłać go na serwis. To raczej błąd systemowy. Czy za pomocą drone hack można to zrobić? Bo czytałem że tylko mini 1 można naprawić . Może jakoś mógł byś mi pomóc.

[@laaganvlog478]

Mavic air plzzz

[@djiSolutions]

We also have calibrate firmware for all air models telegram me: t.me/djisolution

[@enzo-no6qb]

i need the firmware plsss

[@djiSolutions]

Telegram me

[@LuisMendez-dd6sz]

can i contact you?

[@djiSolutions]

You welcome

[@quyennhuvan5619]

I want to contact you

[@djiSolutions]

Telegram....!

[@darkfpvmax]

Contact number

[@LuisMendez-dd6sz]

can i contact you?

[@djiSolutions]

@@LuisMendez-dd6sz of cos