2022 BMW S1000RR | TST Industries In-Tail LED Integrated Tail Lights Install

[@MrDeepseadweller]

Nice vid. One note - you do NOT need to remove the seat to do this installation. I have these lights on my bike, and because I’m in Australia I get the amber as well. Really nice solution. They are ultra bright and look completely oem when installed. I also installed the TST hi-mount license plate holder with LED plate light and it looks great. Easy installation and no mods required to the bike’s wiring - all plug and play.

[@CaliMotoTV]

👌👌👌

[@th33ng]

2024, I’m doing this specific configuration with my S1000RR 2024. This video is awesome and very informative ❤ Thanks for sharing 😊

[@beeweezee71888]

This is actually dope. I actually like it! I love the BMW emblem on the back so clean.

[@CaliMotoTV]

Agreed 🤝

[@johnlasure6273]

Do you have the part number for the BMW tidy tail with BMW emblem? I got the TST delete plate, but want the BMW one…. Link to buy it please or part number.

[@EtaSoon777]

@@johnlasure6273 Yes! Need that too!

[@SaskRiderMoto]

Great video. Question for you. If I was to buy the rear fairing (tail end) of the S1000RR, would they fit on the S1000R? I hate that BMW put the turn signals and brake all in one on the signal indicators. This option gives more visibility so people will notice the bike when following you.

[@juanonline]

Thanks for the video! I’m looking into getting a S1000RR next year and I will definitely use this solution to clean up the rear. TST Industries makes awesome products, I got their LED lights all around my 2020 ZX6R and it converted the looks of the bike.

[@CaliMotoTV]

Sweet 👌

[@ianmcmillan6927]

Followed your instructions today and installed the lights and fender eliminator. Great instructions and easy to follow. Thanks.

[@CaliMotoTV]

Thanks for supporting the channel, glad we could help you out on the install

[@bradybingham2317]

I went with the TST tail lights and fender eliminator on my 21 S1000RR! Very happy with how it turned out!

[@CaliMotoTV]

Glad to hear that!

[@jaredmarshall8133]

Brady, I purchased the tst closeout also. How did you resolve the license plate light error?

[@bradybingham2317]

@@jaredmarshall8133 the license plate error is caused by a bad connection with the quick connector. What happened is I inserted the wires too far in the quick connector on the plug n play wire harness so it didn't have a good connection. After some adjustment I was able to get the wire leads to connect properly with the quick connector. The license plate light turns on and there is no error.

[@oscarmerlos2189]

TST product is the best. To bad they don’t do fender eliminator for the RS660. Great videos brother. Is always enjoyable watching them.

[@CaliMotoTV]

There's home they'll RND something up 🤞 glad to hear you enjoy those!

[@fredshorey4015]

Does this kit, including the BMW block off plate, fit the S1000R?

[@CaliMotoTV]

Yes.

[@charlesscoggins5029]

Great video. Very detailed. I believe I saw a video where a small hole was drilled to run the license plate light above the tag. But, did the dummy plugs come from tst? That with the bmw plate logo looks excellent

[@CaliMotoTV]

The dummy plugs came with the plate block off.

[@6ix418]

Just order mine can't wait to put on

[@CaliMotoTV]

Nice

[@jeffh278]

These how to videos are always great

[@andreyostrovsky6022]

Hi ! Appreciate very much your videos, very helpful. Quick question to you, and thank you in advance. Am I going to be able to install this on my 2023 S1000R ? Tanx again.

[@kattytadao]

hello friend, the TEXTURE and COLOR of this cover with the BMW logo is the same TEXTURE and COLOR of the motorcycle's tail region (matte black)???

[@CaliMotoTV]

Yes it is.

[@frankbello8684]

Hi, this lights look great, I will like to know where to order the BMW logo to cover the tail hole once the lights are installed

[@CaliMotoTV]

Link in the description of the video

[@Scorpion7substance]

How did you get a USB plug? Can you add it to any S1000RR 2021 +?

[@CaliMotoTV]

Came with it stock

[@brianglendenning1632]

These workshop vids are great.

[@CaliMotoTV]

Thanks, that means a lot 🙏

[@j-dubya_4114]

Just put this on my bike. Great video as usual! Thanks!

[@CaliMotoTV]

Awesome, good job. Thanks for watching 🙏

[@brandonjohnson4026]

Best solution for the tail lights by far. Is it possible to keep passenger pegs with that plate relocate?

[@CaliMotoTV]

Yup!

[@MrJiujitsublackbelt]

@@CaliMotoTV is that with the same ticked position? And same brand ? I just bought my S1000 M yesterday and really want a tucked plate with good fitment I just don’t want to remove my passenger pegs :(

[@hanselmelo771]

????????

[@akeithan]

Now I need S1000RR...:-)

[@CaliMotoTV]

👌 👌 👌

[@earldizon1220]

I wonder if this can fit on 2024 BMW M1000RR?

[@draganzdravev5545]

Great video! I have the same setup with the BMW cover. The dummy plug doesn’t seem to work. I still get the plate light error /warning. It doesn’t go away

[@aturk1731]

Same here, did you find a solution?

[@draganzdravev5545]

@@aturk1731 nope. Hoping the dealer can just remove it

[@CaliMotoTV]

There's a race mode setting where you can turn that off.

[@draganzdravev5545]

@@CaliMotoTV is there nothing that can be done in other modes such as dynamic

[@michaellilly4303]

Did the s1000rr come with the BMW badged race cover or does it have to be purchased separately?

[@jpspinoyride4547]

That is a bad ass clean looking upgrade bro hope to get my bike delivered soon and I will do d same ,thanks for the video...

[@CaliMotoTV]

Ha! That's great, congrats on your bike!

[@jpspinoyride4547]

@@CaliMotoTV yeah bro ordered the S1000RR M package..thanks for all you do It will help me a lot on my install...

[@Ragnar9293]

Need it for the s1000 R

[@CaliMotoTV]

😏😏😏

[@johnjohnson1681]

your videos are so good man thank you that's how it should have came those lights are clean

[@kennethengstrom9261]

Hi Bill 👋🏻 Yup! Great looking tail👍 Nice detail with the red rings on the lightning frame👌.

[@CaliMotoTV]

👌 👌 👌

[@Lsneaky]

You sir just got yourself another sub! Awesome video!

[@bcatthecat]

Hi, thank you for your great video! I installed this kit today, but I realized I forgot to buy the plate light. Now there is a plate light warning on my dash. I noticed that you did not have the plate light as well. Do you have any way around this warning? I am planning have the bike tuned from BrenTune, I wonder if they can clear this warning through a flash?

[@CaliMotoTV]

It's a setting in the back menu you can turn on and off.

[@Spartan_-du9wi]

As usual awesome thorough video! Nice kit for the BMW

[@CaliMotoTV]

Thanks for watching 🙏

[@nnameriF]

Is there a pretty big gap with your tail cover plate? Mine has about a 1/4 inch gap.

[@WomacksRideTechandFitness]

Did BMW correct the lack of power in that years model vs your previous one you had?

[@CaliMotoTV]

Video coming soon.

[@dadams1947]

Another great video! Question . Why is there no light for the license tag? Wouldn't that be required by law for possible riding at night??

[@CaliMotoTV]

Technically the indicators aren't "legal" either, so.... 🤷‍♂️

[@dadams1947]

@@CaliMotoTV Okay, and actually I don't ride at night anymore here in Atlanta since I retired from GM in '08.

[@EtaSoon777]

Tst offers a license plate led light separately. It’s cheap. Like $20.00.

[@joeysantos5987]

Please point me where can I order those oem fender block offs? Thank you, cheers! 😊

[@dominicanpapi81]

So do I have to remove the passenger pegs for the low mount license plate holder

[@jaredmarshall8133]

Hello, I noticed your display showed a hazzard light for the missing license plate light. Did that clear on its own?

[@CaliMotoTV]

No there's a menu option for this in the race track mode.

[@scott547]

That’s nice man! I love my tst stuff as well!

[@CaliMotoTV]

Nice! Glad to hear that. Thanks for watching 🙏

[@freemaysin5088]

Think this will work on the single R?

[@davids4110]

What front turn signals do you go with?

[@ChokolateSushi23]

Does the plate holder come with a light?

[@KhanhLe-ln4ck]

Hello, where can I buy those "dummy plugs"? Thanks!

[@CaliMotoTV]

Link in the description of the video.

[@kswissace]

Do you have to loose the rear pegs for the plate to be there? I'd like to do this but keep my foot pegs

[@CaliMotoTV]

No you do not.

[@CrazyFishFreak]

Where do you get the bmw holder!?

[@ramazissa8633]

Question, can the police radars catch the plate number in this position?

[@CaliMotoTV]

Not sure.

[@rookiebiker7022]

Hi, can you telme where can I get te UNDERTAIL CLOSEOUT plate with BMW logo ?

[@glenndinkins4786]

We’re can I find that bmw race block off plate so I can order one please ?

[@CaliMotoTV]

Link in the description of the video.

[@quincyjackson8167]

Where did you get the stock bmw block off?

[@CaliMotoTV]

See description for the link

[@s1k_rr_bg]

Hi man. I just bought the NRC integrated brake light turn signals fender eliminator kit for s1000rr m1000rr , I installed it, loks great, the turn signals are ok, but the day light and the break light are not working. There’s a message on the display saying “Brake light faulty, Have it checked by a specialist workshop”. My bike is BMW s1000rr 2020. The turn lights are red, so the product is may be the US market. Could it be the reason for the problem? My bike is produced for the european market. can I fix it by myself or I must purchase the EU version of the product? Thanks for helping me.

[@CaliMotoTV]

No sure, please reach out to TST

[@chadgruver4423]

Great video , lots of details!

[@CaliMotoTV]

Thanks for watching 🙏

[@jonathanesqueda3452]

I can still use the passenger pegs with this mount right?

[@CaliMotoTV]

Absolutely.

[@abell8533]

what if i wnat to keep the foot pegs on this set up . is it possible? thank you in advance

[@CaliMotoTV]

Yes, but not with the mount we're using for the license plate.

[@dsimon9s29]

Thanks for posting. A word of caution. A person in a forum posted he stripped the screw holding the riders seat in place. He had all sorts of problems/headaches fixing. So when I saw you use the driver to take the screw off, it set off alarms in my head. :) I am interested in these light. Good to see TST finally has them in the market (took them a while). How is the fit and finish of the lights and are the light bright enough to be easily seen by drivers behind you?

[@CaliMotoTV]

They're brighter than stock. Great fit and finish.

[@RedbullBMW]

Can this interview plate for the 2013?

[@coolyundo]

Hey buddy I wish they made this kit to fit the single R

[@CaliMotoTV]

Right? 😢

[@coolyundo]

@@CaliMotoTV Ik you own both bikes do you think a small modification could be made to make that fit the single R

[@Ken_Myette]

Have you heard about the stop sale order on new S1kr?

[@CaliMotoTV]

No.

[@alexanderking3971]

Does this fit on the 2022 s1000r?

[@morazzak9754]

Do you have the link to the dummy plugs? Where did you purchase them?

[@CaliMotoTV]

It's from revzilla. Part of the block off kit. Link is, and has been, in the description.

[@morazzak9754]

@@CaliMotoTV Thank you!! I pick up my 22 s1000rr on Monday!

[@morazzak9754]

I bought the same kit plugged in the dummy plug in the license plate light and I still get an error! I bought the same m cover kit straight from the dealer. Ugh I wonder if my dummy plugs are different.

[@davidgriego8722]

Do they make the plate bracket with a light to make it legal?

[@CaliMotoTV]

Yes, however, technically most tidy tail set ups are illegal since the spacing between the indicators aren't up to spec.

[@SP-xd8gs]

Thank you for the video, I am not feeling the design of the lights it doesnt go with the lines of the bike wish that would have done a straight bar light on each side instead of 3 cricles

[@CaliMotoTV]

👍

[@j.taveras8447]

I’m thinking the exact same thing. There’s just not any great options.

[@SP-xd8gs]

I have the nrc one and it looks fore on our bikes futuristic

[@johnlasure6273]

Great information. Can you please share a link or part# on that BMW emblem delete plate. I was unable to find it. I also have the 2022 on my S1000Rr, but TST delete plate doesn’t have the emblem.

[@CaliMotoTV]

www.revzilla.com/motorcycle/bmw-m-race-cover-kit-s1000rr-2020?sku_id=1745939

[@johnlasure6273]

Thanks so much!

[@corbinroy4851]

The high mount/lights doesn't come with a block off plate?

[@johnlasure6273]

@@corbinroy4851 it does, just a standard (no emblem) blank plate. I wanted to BMW race plate that makes the install look factory. Looks great, I now have on my bike.

[@46mtn]

Light for license plate ?

[@abyalex235]

From where did you get the rear block off with BMW logo on it?

[@CaliMotoTV]

It's a bmw accessory.

[@abyalex235]

@@CaliMotoTV So how did you purchase it, I checked online but couldn't find it.

[@johnlasure6273]

Please post a link so we can also buy that BMW emblem delete plate too. I was unable to find it..

[@brianglendenning1632]

It seems brighter than the stock lights

[@CaliMotoTV]

Definitely very very bright

[@brianglendenning1632]

@@CaliMotoTV I watched the vids by the manufacturer, and while I like the look of the passenger mount tail tidy, in my part of the world that would attract too much attention from the PoPo so the other tail tidy, with its variable angle, would be less likely (but not immune) to attract that attention. They make nice gear.

[@johnathanwallace7446]

Hi Bill. Just fitted my TST kit to my 2022 bike, like everyone else I'm still getting the licence plate light fault even with the dummy plug fitted. Can you just confirm even with yours fitted it's still showing the fault in the standard modes? I know it can be turned off in race pro but it's the standard modes I'm wondering about. There was 4 dummy plugs came with the cover kit, 2 for the indicators front and 2 for indicators back. None for the licence plate light, I can't see what the point to giving us dummy plugs for the indicators was if it's just gonna throw a fault for the licence plate light anyway?? Thanks in advance

[@CaliMotoTV]

You have to turn it off in the back ProMode menu

[@johnathanwallace7446]

@@CaliMotoTV hi thanks for the reply. I know it can be turned off in promode, it's the standard modes I'm wondering about like road, dynamic and race. Do you still have the error symbol above the abs light? I suspect you do from your video, the dummy plug isn't actually doing anything

[@leeng8714]

Do you have a part number for the item @ 2:02 (the tail light cover) I want to order one in Canada

[@CaliMotoTV]

There's a link in the description of the video.

[@Chitownmud]

how did you get the roundelle for the cover plate??

[@CaliMotoTV]

Block off plate link is in the description of the video.

[@Chitownmud]

@@CaliMotoTV it’s sold out:/ found one on eBay

[@kiaking4225]

I have a hyper flash problem on my right side

[@mr2scroll538]

Good video

[@CaliMotoTV]

Thanks for watching 🙏

[@deathcommando1]

I’m still waiting for Futurismoto warranty replacement on their tail light. It failed immediately.

[@CaliMotoTV]

🤯

[@jamesv5343]

No tag light?

[@CaliMotoTV]

🤷‍♂️

[@blainehouser4354]

Plate light???

[@CaliMotoTV]

🤷‍♂️

[@GLOBUS_25RU]

👍👍👍

[@royalmatues7159]

I purchased this same bike a few weeks ago except I got the Full carbon package....I was wondering if I can get your email address and ask you questions about this bike...

[@CaliMotoTV]

Sure hit me up on Instagram or [e-mail]

[@royalmatues7159]

@@CaliMotoTV thank you I appreciate it..

[@فراتفروتي]

😍❤😍❤😍

[@CaliMotoTV]

😏

[@batshitcrazybeats2729]

Where are the dummy plugs

[@CaliMotoTV]

Block off plates from revzilla. Link in the description of the video.

[@victyper301]

Dad can you buy me the 2023 S1000rr m package

[@ryanmalone2681]

The license plate isn’t horizontal and has no light. That’s just gonna be a hassle with the Police. No thanks.

[@nnameriF]

TST sales a license plate light for it not sure why they don't include it with the kit