Perfect Subaru WRX/STi Fitment w/ PERRIN 20mm Wheel Spacers!

[@dylandarity8694]

I’m so glad I was able to see what the difference would be with my wheels!

[@sprstemvnose1]

I found that 15mm on front and 20mm back are the best fitment with stock wheels on STI 2015

[@AbdurRahman-lh6wf]

Dont you think it will make unstability in steering? Like under or overstreering?

[@sprstemvnose1]

@@AbdurRahman-lh6wf It is absollutelly fine, ride is the same I can say. It is not so big difference, nothing noticable. I switched already from spacers to the rigt ET wheels. In front I have now ET35, on the back ET40 (ET35 looks better, but necessary to modify fenders already, so staying with ET40 on the back for now)

[@AbdurRahman-lh6wf]

@@sprstemvnose1 i have problem with my new velg. I want to put adaptor but the different quit significant. About 2 or 3 cm between front and rear. It will become 4 or 6 cm total both right and left. Do you think it will become any serious problem if the different that big?

[@sprstemvnose1]

@@AbdurRahman-lh6wf Not sure, not experiences with that, teoretically maybe it can confuse difs, maybe some geometry issue possibility, but I dont know

[@imoffendedthatyouareoffended]

@@AbdurRahman-lh6wf theoretically since it’s awd and you aren’t keeping them spaced the same, you are going to prematurely wear down your differentials and tires. So just keep that in mind.

[@DZeroENT]

Hub-centric-ness, yay, we know so much about cars!

[@J.NOBODY.1]

Looks good, almost how it should have come from factory. Most people run RCE yellow springs with 20mm spacers and have no rubbing at all. So with a .8 - 1 inch drop you should be fine.

[@joebidenn11]

Hey Jason I know this comment is from a long time ago, but if I run rce yellows and 20 mil spacers will the car look good and lowered?

[@J.NOBODY.1]

@@joebidenn11 plenty of people do it on their cars so it will look great. 1 inch drop with a flush fitment.

[@BigBennettTV]

This helped me out so much on fitting the new work wheels onto my acura rsx thanks a bunch man!

[@CameronAlford]

Heck yeah no prob!!

[@moiseswynns1142]

What size work wheels do you have? I have 17x9 cr ultimates on my rsx didnt need spacers etc

[@bendtheski]

So you added 2+ lbs per wheel for appearance? Seems like a poor trade-off for the more expensive wheel upgrade option which might actually enhance performance rather than detract from.

[@primedzay9510]

Thanks man works great for my Wrx 💯

[@gxbeeee]

Did you rub at all when turning the front wheels? I have a 2013 WRX.

[@jbivvy420]

Thanks for this video. I now know I am getting those.

[@BJPr12]

I was wondering if you noticed any difference when driving like better handling since there’s a wider stance..

[@imoffendedthatyouareoffended]

Gimme a few days I’ll let you know. I just got mine and I’m installing today. I’d assume that if there was a difference it’s gunna be very little but I could also be wrong as fuck. Lol.

[@lefan519]

@@imoffendedthatyouareoffended how were they

[@imoffendedthatyouareoffended]

@@lefan519 been absolutely fantastic. ive ripped her on dry pavement around a corner multipe times since i installed them. theres been 0 problems, you can feel the difference in the wheel from the slightly wider stance. the main important thing is that they hold up when cornering, and they most definitely do. such a simple install for such a nice fix to ugly tuck of the wheels. makes it look a lot more sporty than before.

[@lennonpearson]

Did it affect the handling at all?

[@AnythingButDinks]

This video helped me so much thank you

[@angeltorio647]

What’s the best size for 2024 WRX?

[@Specialblend777]

Were the original studs sticking out of the spacer? Looks like it. If so, they need to be shaved down.

[@kamala989]

I don't know if this was asked before, if I have stock BBS wheels for the 2016 STI will the OEM studs protrude from the 20 mm spacer and hit the backside of the wheel during installation?

[@jmt0728]

No it will not you’ll be good

[@austinalbin5320]

Looks good cam 💯

[@carlwerner8775]

What if you need to replace the studs on the spacers?

[@polesmoker2802]

Get some wheels with offset

[@brendanfogel4573]

I got 35+ offset and n my esr wheels for my wrx

[@pilotswagg3833]

awesome set up! what size tires you running here ??

[@2023startingCA]

What is the difference when driving?

[@fhysical8479]

have you had any problems with the spacers as of now?

[@piceyo1]

I’m assuming because it’s an awd you need to get all 4 wheels spacers? Instead of just 2

[@heavystarch7044]

Are those stock 18's or 19's?

[@jmt0728]

What were the stock wheel specs?

[@PuertoRicanThor]

What size did you use for the torque wrench?

[@theramblesaurus]

So months down the road. Any wheel bearing issues? I just powder coated my stocks and want the stance too

[@2Realxc]

Would the ones you have in your description fit my 2013 Subaru sti hatchback ?

[@alexgorgonio2904]

Honest opinion. You think base wrx wheels will be okay with 25mm spacers. Base wrx wheels are 17x8. Link. Thanks.

[@DriftingZaabee]

keep going with the 350z please i like that content

[@chpz1172]

So do the oem studs stay flush with the spacers ? Oem studs are 20mm long?

[@dillonbragatto4705]

yes. poem is perfect

[@jholla1313]

What size socket is used for the low profile lug nuts to mount the spacers?

[@htejjke2228]

Much better

[@louie088]

Is alignment recommended after install?

[@MEGAfabio1]

Wondering this too

[@kennin_salas4485]

What is the most mm you will recommend I want the tires to be the most out it can be

[@Noisy.Garrett]

but wheels then

[@slatty2457]

25 mm

[@fofo2282]

Bonjour ,je ne comprend pas bien l'anglais, qui peut me dire ,comment acheter pieces auto perrin? Car je n'arrive pas à rentrer dans le site . Merci

[@dominicbrabant]

www.perrin.com/shop/wheel-spacers/subaru-20mm

[@davidjohnston7512]

Completely illegal here in Australia.Cancels out any insurance policy...

[@uimgabe855]

Aussie car laws a pretty strict to drive on the road, at least thats what ive gathered from watching MCM ;)

[@raceyouhome]

What size spacers would you recommend for a 2020 sti trying to clear caliper with a wheel fitment of 18/9.5/ +40?

[@eugenequentin441]

I guess im randomly asking but does anyone know a way to log back into an Instagram account? I stupidly lost the login password. I would appreciate any tricks you can give me.

[@kashtonsebastian4802]

@Eugene Quentin Instablaster =)

[@eugenequentin441]

@Kashton Sebastian i really appreciate your reply. I got to the site thru google and im in the hacking process now. I see it takes quite some time so I will reply here later with my results.

[@eugenequentin441]

@Kashton Sebastian It did the trick and I actually got access to my account again. Im so happy:D Thank you so much you saved my ass :D

[@kashtonsebastian4802]

@Eugene Quentin You are welcome :)

[@LumpyCusterd1]

dopeeeee

[@jsafrit0717]

I said fk spacers and went 18x10 TE37's on my 2018 STi w/ some 275/35 meats

[@J.NOBODY.1]

JSAFRIT1984 wish I had the money for te37s but I went with Enkei Ts-10 in 18x9.5 and did 275/35 aswell. Looks amazing with slight poke past the fenders.

[@jsafrit0717]

@@J.NOBODY.1 yea it only took one trip to realize I had to roll the rears, no scrubbing since. I have Tein S Tech springs on there for the time being and they ride AAAmazing

[@J.NOBODY.1]

@@jsafrit0717 yeah I'm currently on stock suspension so I have no problems right now.

[@erysta_3225]

@@J.NOBODY.1 what offset did you go with?

[@J.NOBODY.1]

@@erysta_3225 +35 offset on 9.5 inch wheel. Checkout my recent video for a how it turned out.

[@adnane4409]

It’s cool keep going 👌👌

[@QCJSiteB]

Just adds an extra point of failure. Not good if you're ever putting any serious strain on them.

[@xcrazypyrophone]

Your a dumb ass. Not like he brought the wheel out 5 inches.

[@jacobbaker9389]

Is that why race teams run spacers too ?

[@jbivvy420]

They are hub centric which is the better spacer on the market

[@JasonMoussa]

looks great! will my stock wheel lug nuts work or will i need longer lug nuts? thanks.

[@dillonbragatto4705]

stock ones are perfect. installed mine today

[@leebob8032]

Stone chips coming up

[@iloveklaj]

Lee Bob he got mudflaps

[@clauficavilez]

How does the steering wheel feel? Very unstable and moving? I have 12mm wheel spacers in my 2012 STI, and my steering is quite installable.

[@chinovo]

Are they hubcentric ?

[@mikechang6943]

Do you have to retune or anything after installing them?

[@nazk8515]

Yea get your car retuned man, your need that proper air fuel ratio with those spacers

[@VachOrd]

@@nazk8515 LMFAO

[@samsmith4067]

how would you say this effects drive ability?

[@ufffsergio5124]

Sam Smith it will wear out your wheel bearings faster

[@bendtheski]

I could feel the extra weight accelerating. Spacers are a poor substitute for an upgrade to lighter wheels with the spacing you want.

[@davestatikpoi]

Presents wheel spacers, doesn't know what hub-centric means. Seriously?

[@travisiswin]

Yeah, because they portray themselves on this channel as completely knowledgeable professionals. /sarcasm

[@alonzo1178]

More of the 350z

[@speed3zus329]

Alonzo 117 he has multiple builds it’ll be ok buddy

[@Hakeeeeeeem]

I waited you to comment about drivability but it seems only the look, ricer alert 🚨

[@8risk]

Useless

[@tylerrobert9925]

Why

[@bendtheski]

@@tylerrobert9925 adding 10-is lbs to wheels alone just for appearance for starters...