Rebuilding A 2 Stroke Power Valve | RM250 Rebuild 13

[@Timbo5553]

That plate you put a washer on the power valve at 5:40 shouldn’t be tight it needs to have a bit of movement because that spring it sits in acts like a mini shock absorber for when the arm comes up and down.

[@MultiMwe]

Indeed, that arm must be loose. I protects the powervalve actuator mechanism in the event the power valve gets stuck. The mechanism will push the spring and not damage itself.

[@jeandebeer5470]

WOW CAMERON I AM FROM SOUTH AFRICA AND I JUST WANT TO THANK YOU FOR YOUR CRYSTAL CLEAR VIDEOS. I AM TRULY INSPIRED BY YOU. THANK YOU.

[@adamellis6675]

"always a bad day when you forget the lube" subtle 😂

[@kawasaki9mx]

make a video on how to restore or polish up plastics. I bet a lot of people need this.

[@winru2]

I think he did a while ago. He used a cleaning product that also shined the plastics and made them brighter.

[@fastkidz8614]

Also if it has stress marks just very lightly go over it with a heat gun make sure to be light and conservative as to not completely melt the plastic

[@hennings627]

Agreeeeee

[@bobz1736]

3:35 it's not so much the area of the exhaust port that the 'power valve' affects but the height of the exhaust port. The higher the top edge of the port the earlier it starts to scavenge the exhaust gas which produces power at higher revs. When the port top edge is lower it produces power at lower revs. 😉

[@ads9765]

This is the video series I have been needing to rebuild my 99 rm250. Thanks so much Cam for doing such a well filmed and very thorough job.

[@kevingriffith1051]

I am currently waiting on my 1999 RM 250 cylinder which is in the mail from Powerseal, getting it replated , cant wait to put it back together. I was really unsure how the powervalve worked. This video was very informative. Thanks for putting out great content.

[@Noah_O_]

I love your videos so much dude! I’m 12 years old and I am doing a full rebuild on my quad (ALL BY MY SELF) thanks to you!! Keep up the good work!!

[@verbalwidget0919]

Love the RM250 series, I picked up a 2003 RM250 and all the RM250 videos have been a great help. Thank You

[@maximummoto9713]

I’m really happy to see how far you’ve come recovering keep it up brother

[@Ord750]

Awesome vid, can’t wait for the next one.

[@damonkoebel8141]

Great video, helped me out re doing my yz250 powervalve. Thank you

[@shanemoreschi]

Really like your videos man. You really go into detail unlike some other youtubers. You do amazing work. On your future projects you must please consider doing a 4 stroke bike

[@neal2608]

Thanks for another great rebuild vid on this bike. You do an amazing, thorough job and not to mention explain it all so well. Looking forward to the next!

[@rileysanderson6166]

Keeping me entertained during this lockdown😝

[@ParryBrothers]

love how clean and tidy you work

[@mostlymotorcycles.]

Your build quality is as always flawless. Inspires me to do better every time I watch one of your vids.

[@micahrussell9947]

It’s crazy how much knowledge you have about this, keep it up

[@davincicalisthenics]

You are the chrisfix of bikes, love these videos 💯

[@kevinlepage123]

Camtastic no one does how to videos like you the best take care and stay healthy

[@romand239]

Nice job cam love your videos , giving dirt bikes another chance to Run and ride again🏍

[@maxbarrett5973]

Finally another upload from my favourite youtuber

[@robertcadiz4346]

And the innuendos are hilarious! Lol!!! Love your videos.

[@slagletoby]

For those who work on the RM power valves be sure to look at the electrical schematic and notice the power valve solenoid. Not all models have the solenoid. If it’s not actuating as it should your bike may not operate at optimum performance levels. As I understand it the solenoid operates like a waste gate.

[@tylerberry4118]

I have been trying for 2 hours to do what he did at the 4 1/2 minute mark. About to go insane 🤯🤯🤯🤯

[@abrahamchacon6909]

Nice motor, nice asambly.. Always clean

[@charliecharliecharliecharl8554]

I didn't know it had side valves , Explained it perfectly

[@scottyd024]

Rip brother ,still watching your content

[@jades323]

If I won this bike I wouldn’t know what to do with myself

[@dogstylez585]

I won a car once in a raffle but didn't read the fine print. To receive the car i had to pay the taxes which i couldn't afford. If i won this bike it'd be the first thing I actually won and would receive lol. I had to sell my bikes cause the covid.

[@taajblan9562]

Me either I hope I win!!

[@debbiescott692]

Love your videos. Been very helpful for my son and his bike.

[@simonbarnikel7295]

Love the show, it’s been a big help thanks. Can you Cerakote an exhaust ???? Might have some cool effects. That could be a fun video for you to make.

[@shawnhughes615]

Great video love your work can’t wait to see the final build

[@bubaa1218]

Can we get a video of you changing the dome on the cr250 to see the difference from the stock compression to the high compression?

[@scottyboy8868]

Always a pleasure watching your videos dude. Hope your safe and well 👌

[@mauriciofaican3578]

One more time bro!! COOL videos🤘

[@kellywiley9007]

I need to go though my power valve on my rm. can’t wait the see what this bike is going to look like when done. It will need a nice home in New York my 01 rm125 needs a play mate. Lol

[@andrewrussell1238]

Thanks man helpful video. Just dropped my cylinder off today to get fixed. Now we play the waiting game to get it back and back together haha 2000 rm 250. Thanx

[@tristancotton9623]

These builds are really nice

[@renoriderr6929]

Beautiful cylinder blok😍

[@lukasveronez7690]

You are a great youtuber Cam keep up the amazing work!! Your RM250 build videos have been very helpful to me as I am rebuilding the same bike just a year older, it is a 2001 but basically the same bike.👌🤙👍

[@trentensnyder6072]

You teach me A LOT

[@TSOLification]

where can I buy the engine stand / mount for the build? Great work mate!

[@alanhume908]

When will you be completing this build. Waiting to see the end results of the project.

[@Zeesneakyninja]

Been kinda waiting for this one

[@cee5902]

Please answer pls. Should I run Rotella t in my 2016 yz250 2stroke trans? I seen you run it on the cr125 but is it ok with the 250?

[@jyost777]

Is the next RM250 video coming out soon?

[@jimigreco7230]

What is Cameron's favorite part of Halloween? Trick, or treat

[@luisfranciscomartinezcoron4808]

Where could i buh cerakote, for it to arrive in spain. Thanks for your videos

[@ashtonfairhurst1240]

your over here building bike after bike wish I had the money for one in general lol

[@jakewood4329]

Hay Cam have u sean the new Neiklo engine stand it's awesome if u have an get it u should do a contest to give your old 1 away?

[@winru2]

Hi Cameron I'm wondering what Cerakote series you use? And when will you have the 1 inch or just all the small cleaning wheels in stock? I finally got some spare money together to make my 1990 great again.

[@jenelambong688]

wow super nice....i can't wait for bike is done🔥🔥🔥🔥

[@darronmalonetowingchannel]

My offer still stands. I have all my own tools.

[@dimitarchuchkov7490]

Good video my suzuki rm 2005 250 cc is not the same power valve .Have a nice day from Bulgaria.

[@jtbikerepairs3478]

Hay mate love your vids where did u get your engine stand for in need of one of these 👍

[@octanemayhem2686]

Your channel is inspiring builds 🤙 hey quick question . If I can't find a reputable company locally to bore my cylinder on the 97' CR125 build I'm doing, Is there one you would recommend I can mail my cylinder to ? Bore or resleeve idk what's cheaper ?

[@cee5902]

Awesome work bro I learned alot from you

[@komerka35]

This is a part of the previous build video right? Or am I going crazy

[@Fishon230]

i thought i was going mad too, but find it very easy to watch it again.

[@silkcustoms520]

Cameron. Your the Man. Incredible Work. You have a Job if you want to come work for me ?? Tricked out Cycles. Warminster Pa !!

[@UlisesGlez26]

Very helpful information man, always learning from you🙏🏻

[@knoah-hc4xo]

Do you live in washington. Cause I feel like I saw you at a powersports place

[@dipstick_jimmy8332]

Can you use a crows foot to get that cylinder torqued

[@disassterb8]

Your next build should be a 86 honda atc250r three wheeler

[@wayneboehm8139]

Nice setup on your truck on my 08 Meant

[@carternisely904]

really wanna get some cearakoting done on my dirtbike engine but can’t afford it

[@brettholm3564]

Man, I want this bike!! Lol great job man!!

[@kbsrfilms903]

How do you know if your power valve adjuster is in its default position?

[@ajsimoes20]

Going to start my own rebuild project during this crazy time , got any discount codes for RMATV to keep cost down a little??

[@konna7475]

Hey Cameron! I was wondering why cerakote those parts not powdercote?

[@ericjaulin9562]

Tolerances, powdercoat is way to thick and adds to the overall size of the part.

[@konna7475]

@@ericjaulin9562 Well yes, but why the covers? I'm just thinking because im considering painting my car rims and maybe later my ktms rims and engine covers.

[@redrider2503]

Imagine winning this bike 😍Idk what id do with myself oml lol but lovin this build 🙌🏼

[@ivansomma4615]

Omg I wan it so bad I been watching you since you first start a KZbin

[@UncleMatt141]

This bike Should sit on a stand in front of a bar 🔥

[@ads9765]

Since you are working on one now, I thought I would ask your opinion. On my rm250 the wrist pin bearing has just a little bit of play on the pin itself. Is this normal or should the bearing fit snug on the pin? Thank you for your input

[@electricaltyler5998]

Could someone explain the purpose of the linkage I just rebuilt my bike have the topend left and the bottom piece of the linkage doesn't seem to have any purpose

[@nick_3771]

Better than OEM!

[@daltonboyko]

Do you have a swing arm for an 04 cr250r i just bought it and the old owner let the chain rubb threw into the bearings

[@TAQIYYA257MX]

I want to ask you. Can we apply the magnet of rm to another 2 stroke suzuki machine?

[@ihminesuomest5947]

do you have tips what should i do mu 50cc yanaha dt x 2011 dont quite work... ot i mean it does work until im on 4th and 5th gear then it does not take any rpm otherwise it does work greatly

[@simonkjensen3910]

What kind og lube did you use for the exhaustparts?

[@heze_gamayo_8088]

does the giveaway work with people in Hawaii?? because I'm from Hawaii and I have a 2017 yz125 and I love to ride mostly trail riding but if I won this bike I would ride it everyday..

[@timgilbert9040]

Where did you get the head in the end scene?

[@wayneboehm8139]

Cameron had a question what is your average budget on builds just wondering not sure if you talk about it in past videos but anyways good build tho keep up the good work nice truck ...notice you got fox setup on my 08 👊🏻💪🏻💪🏻

[@johnh1001]

How did you replate the bore and with what material ?

[@aminediaf7663]

Good morning my friend I need help from you I have a type of motorcycle rm250 2t She erased the piston and the liner and I need to blend the cylinder and redo a new piston Is it work it's okay we're not before please tell me Where are the original Susuki Shirt hits? ???

[@enduroisland4202]

Looks sick!👍🏻

[@gavinkeller4729]

Love the vids man I also have a Suzuki two stroke

[@baikal4784]

Which manufacturer makes the best power valve system ?

[@officialmysteriousrider6327]

I fought you'd of built your own vapor blast cabinet with all these projects be now

[@billymcculloch-hardenduro2755]

Hey mate noticed you kept referencing the design to be 03-07 is that because they changed the design in 08 or did you not realise they made rms into 08

[@Jason-zr6il]

Great video! Can you assist me with my build? It seems as if I’m losing air through my intake when I try to kick start.

[@vivelazikvlz3861]

Bonjour, je suis français, et je me demandais comment vous faite pour rendre les pièces mécaniques dans cet état, des pièces en magnésium ou peinture ? Je regrette de pas comprendre l'anglais mais je m'abonne quand même, je retape un 80kx de 1999 mon cylindre est en nicasil mais du coup vous me donnez encore plus envie de tchecké le moindre détail. Biiig uup de France

[@Schyler__Parker]

Can you post some ride videos?

[@dirtmx4649]

Look at that broo!! :)

[@busatrx850]

Any progress with the RM?

[@阿达-e7g]

兄弟 我想看你修理yamaha dt230

[@realone2321]

Can you show us how to rewire it

[@masher5173]

Is a crf150r same speed as ktm 85 or 125

[@charliehannan9465]

Love your vids keep it up

[@waynepurdy5966]

I am rebuilding an 01 and my power valve is different

[@wayneboehm8139]

lol iPhone screen is cracked sorry my 08 Tacoma has the same setup do keep mind tho you can adjust your valving on your shocks on mine I did ride was to soft for anyways sorry about the double feed let know What a good budget is on bike builds