🔥 Stunning 2-Stroke Engine Rebuild & Restoration | 1996 RM250

[@madmarc]

Watch the full RM250 restoration (which incorporates this video) here: kzbin.info/www/bejne/npOYinqmpt2jnpo

[@drpacman9996]

The crank rebuild was very impressive. Also I really like the camera work, the lack of annoying music made the whole process a joy to watch!

[@BruceBoschek]

Silent professionalism. The best kind of worker. Thank you.

[@thewatcher5271]

That Was Great, Man! No Crappy Music & No Jibber Jabber. Can't Wait To Hear It Run! Thank You.

[@nickvandernet]

There are moments where engineers become artists. And you, sir, are a Rembrant. This was a privilege to watch you work.

[@CBCycles]

Terrific job. You not only did an outstanding rebuild, you prepped it correctly for the next rebuild, whenever that might be. And I love how you built your own Dremel bits rather than pay a small fortune for the factory ones.

[@nedward.7442]

The fact that he washed the engine before disassembling is already praise.

[@tfsvids4117]

Nothing wrong lol

[@nedward.7442]

@@tfsvids4117 No, many people actually don’t wash it before disassembling the engine.

[@bobbyblenio4571]

I agree,but I would have done that Before Taking the Engine Out ! Every time & Anytime I work on my Bike or Any bike,I Thoroughly Wash it First !

[@nedward.7442]

@@bobbyblenio4571 Well, there are different reasons. Modern engines are much easier to clean if all the electronics are removed, but you're right.

[@Gibsonchha]

No need to washhhhhhhhh

[@julian23561]

I came here from facebook, the way you replied to one of the negative nancy's on there was what made me come here. Excellent work my man.

[@madmarc]

Thanks man I try my best to ignore ppl like that but there's so many of them sometimes i can't help it.

[@davidhess6561]

Nice work, excellent detail. Brings back memories of the good old 2 stroke days.

[@hazimreitz]

My dad used to have this motorcycle, he made it a street legal motorcycle and fiberglass glue smell in the morning and evening just to make it compliant. He'd take me to school with it and I remember the bike being tall. Awesome video making me unlock childhood memories

[@gutek5930]

Its a blessing for the eye watching you keeping everything as clean as possible. As it always should be. I hate messy garages and they are always messy

[@Definitive_Designs]

Such a pleasure watching someone with skills do a rebuild. So many videos are hard to stomach the lack of knowledge and half ass work. Wish there was a “misinformation” filter on these types of videos. Save me a lot of money on Pepto. Beautiful Job!!!

[@MarkSmith-hq4rr]

Marc, your level of attention to detail and meticulous focus on minor/avoidable tasks is incredible.

[@madmarc]

Thank you Mark!

[@davidjordan5539]

I’ve been a mechanic for 53 years, love your work you should be proud!

[@madmarc]

Thank you David!

[@raj-u6t1m]

His workshop practices are superb. I am a 35 yr pro and saw a couple little tricks of his that I will be stealing.

[@duwiyono4330]

Aa​@@raj-u6t1m

[@Tapsa-f9r]

What I do after a day fixing bikes. I watch bike fixing videos! Good job man. Relaxing to watch good work.

[@chrisnoyes9397]

By far the best restoration vid I've seen.

[@Neophantom00]

I'm so used to 4stroke engine and engine rebuild that I find some of parts disassembly quite rare and facinating to watch.

[@willaiml]

That’s how it’s done! You don’t see things done the right way on KZbin often. 🙌🏼

[@gooddaymoto761]

То чудова робота,для любителя покрутити гайки ,як бальзам на душу. Дякую за чудове відео. : )

[@gc5157]

You are truly the goat when it comes to dirt bike rebuilds. I’ve seen them all and no one comes close to you. You are my freakin idol. You could be a factory mechanic.

[@madmarc]

Thank you bro, I really do appreciate that.

[@aspopulvera9130]

one thing i find about meticulous work is that satisfactory feeling you get while working

[@rickystephens7253]

Dude, won of the cleanest if not thee cleanest builds I've seen in a while!💯 Definitely top five most superb restoration jobs👍

[@madmarc]

Thanks Ricky!

[@im-that-guy-pal]

On3 of those rare occasions when the restoration is literally better than when it was new. The attention of detail he has far exceeds suzukis manufacturing quality control.

[@UserUnknown-r6q]

Really satisfying to see someone putting his heart blood into the thing he does especially if it's about 2 stroke engines.

[@mangzrc]

I love doing this same type of a thing with Mountain Bikes & RC Helis, your production value is great!

[@thescope3032]

Rooh comment c'est beau! 20minute de pure bonheur Merci

[@abiahzahren2522]

I always watching different kind of assembling and disassembly but this is one of the amazing.. more power to you sir... From Philippines...♥️

[@MrScrollsTooMuch]

Gorgeous. Yeah ok, you got me. The engine is coming out of the 06 exc200. You've set the standard. (2nd engine rebuild I'll have done, excited for round 2. Different bike though. First was 74 TS185, was very rewarding.)

[@luismariano001]

Today I have watching more than 10 videos of your channel. Tomorrow I will continue. Regards from Caracas/ Venezuela

[@beachthor1]

Stay safe tonight, Maduro about to be sent packing!

[@EricBanner571]

The Master at work. You deserve far more than 30K subscribers.

[@madmarc]

Thanks Eric, feel free to tell your friends : )

[@mozer30]

Absolutely great attention to detail, no music and amazing result….the only thing missing, like many other videos, is the measuring and adjustment for the correct squish clearance and conformation of the combustion chamber volume. It’s a massive part of building a 2 stroke for performance and reliability. I would have loved to have seen that in this video.

[@gren509]

I'll bet it took longer to edit the video than do the engine work - thanks for taking the time, it was beautiful.

[@joski9030]

Spotless just how it should be done ! Last one I rebuilt was a ‘95 RM 250 I find doing engines therapeutic

Best rebuild i have seen yet

[@LS-uv9gg]

One of the best, of not the best, resto video I've ever had the pleasure to watch! For some reason I've never had much luck assembling a new clutch pack dry, then putting oil over it. They *always* slip on me, and I inevitably have to take the discs back out, and put them in oil before assembling again. I always wonder at these dry packs then oil installs, if they ever have issues after the video, and never get reported after completion.

[@madmarc]

Thanks buddy! You're right pouring oil over it won't do anything, but letting it sit in that oil bath and rotating the clutch with the kick starter a few times to saturate every spot should do the trick.

[@darkvibes2k8]

Love how you do it all by hand and not just send it off for blasting

[@5555nickb]

Excellent detail, very skilled, I thought I was average building R6 engines but you are on a different level, thank you.

[@dwerik]

Великолепная работа, смотреть удовольствие!!!

[@usairchairmanpfd2889]

Absolutely beautiful work mate!!

[@cirosoares2261]

Great job!! 2 stroke is amazin ! Great bikes! God bless you!!!

[@jimmadonna1436]

Fantastic results, I really like the way you did the crankshaft, the cases look as good as vapor blasting.

[@madmarc]

Thanks man, I was surprised how clean the cases came out too.

[@bikerwilli9130]

The man knows his craft, perfect video thank you

[@ferchoferefb]

Wawww !!!! Que trabajo increíble !!!! Dedicación Increíble !!! Felicitaciones desde Argentina !!!! 👏👏👏👏👏🙋‍♂️

[@madmarc]

Gracias hermano!

[@Longwayaround]

Great work! Getting the crank in spec was super cool. Very enjoyable video.

[@patrickwatters7555]

Two strokes are so easy to work on, love them.

[@d1sc0f1sh5]

Amazing work! Well done mate👍

[@Jon_Luke]

Amazing video, I was truly captivated the entire time.

[@madmarc]

Thank you Jon! I'm happy you enjoyed it.

[@jtgross2324]

I was so excited while watching this, keeping me inspired when I’m building motors 🙌🏻

[@sammyrobert5058]

Really good to see ! Perfect job man ! Vidéo without music are better . Thanks .

[@nigelhicks6457]

Great workmanship mate! Really first class.

[@madmarc]

Thanks Nigel!

[@tfsvids4117]

This is very professionally managed, Great work 👍

[@madmarc]

Thanks buddy!

[@tfsvids4117]

@@madmarc you're welcome

[@williamllorens2141]

A truly wonderful job. Very cautious, and perfectly executed ❤❤❤

[@madmarc]

Thank you William!

[@yeayouknowitsme9839]

Those impact screwdrivers are a life saver I have a set in my box.

[@Brummell69er]

All I can say is WOW!!!!!

[@msodha]

Great job on the resto. Looking to more high quality productions ❤

[@turgutkoral7093]

Mükemmel iş, müzik yerine alet sesi çok başarılı temiz 🎉

[@dirtniron]

love it! great work and beautiful video

[@daveyvert4366]

This thing is gonna look clean when it’s done good job also favorite bike too

[@sebastiandominguez6849]

Incredible work 👍

[@dedikurniawan2696]

Kamu adalah yang terbaik bro 🎉🎉

[@rodolfoSchulth]

Satisfação garantida. Parabéns pelo grande trabalho.

[@armandopires2374]

I like to see the bike run .. excellent work 👌🏽

[@dustinsoule4960]

Excellent job man! Looks fantastic! 😮

[@rpmjawa9672]

Seperti video asmr yang memanjakan mata kita👍👍

[@sebastienmeiresonne3714]

Very impressive work!!!! 👍👍👍

[@flatboat67]

I hate it and love it when geniuses make videos like this.😂 Thanks

[@Animalblessé]

Au top! Travail de qualité sans aucun doute !

[@gustavocrespo298]

Saco dos tornillos señalados, y después, no se donde iban, mis respetos a los genios..!

[@noneofyourbusiness1683]

That was very enjoyable to watch! Amazing job!

[@CarlosGomez-co3gu]

God Damn bruh, master piece !!! 😊

[@MaxwellBenson80]

Beautiful work!

[@jitheshvaliavalappil9333]

This is called restoration... Satisfying ❤😮🥰❤️

[@gordonagent7037]

Beautiful job sir, very impressive

[@frankweber2469]

What a realy nice work. Perfect.

[@atilaaltan4895]

en becerikli en kaliteli en Süper usta sensin

[@cesarcavalo3719]

Trabalho excelente, parabéns pelo empenho capricho e técnica,tens meu respeito e admiração, ficaria mais feliz se visse e ouvisse esse motor funcionando,Deus lhe retribua com prosperidade todo seu empenho❤

[@WildStyleWorks]

hey very nice, i just replaced the piston on my RM250 from 1997 and i had the last size with 66,38mm. i would love ot rebuild mine as you did, but i cant fiind all the needed parts and am not able to do all the work my self. i would have to buy a view tools. but very nice video i am allmost jellous about this nice project.

[@TreadTalk247]

This makes me want to go take something apart and clean it! I want to build a vapor blaster this winter!!!! I just built a home cerakote oven that I can also use for powder coating motorcycle and car parts (for myself and the fam). My Son is also going to cerakote his pew pew machine! But having a vapor blaster will be awesome and make jobs like this even more satisfying and easy! Great video!!!

[@jeffp4646]

Now that’s talent!

[@jonlambshead5115]

Great Job You Can See That You Have Done This Plenty Of Times Before Well Done, It's A Bit Daunting When U First Do A Rebuild. I Have Done Several Myself 😎😎👍👍

[@danoilca]

Excellent job!!!

[@JazzRockYouMentery]

Best ASSMR video ever !

[@tomatoknuckles]

Like a new penny 👌 stellar work as always man.

[@edsoncoelho8528]

Excellent work and top quality tooling!

[@eatcommies1375]

VERY NICE WORK!👍

[@madmarc]

👍💪 ☭

[@Krikduchi-k8z]

Вау. Это сколько же работы. Отличная работа Друг. Ставлю лайк 👍

[@mt1885]

Mad Marc can you do video on some of your tools like blind bearing removers and plugs for the intake/cylinder? GREAT video!

[@madmarc]

I might do this on IG or something

[@MichaelHeinrich1]

Kudos! That's the way it should be done.

[@marsvenusplanet]

so clear and up to detail...great work

[@101carl]

Awesome job you are gifted for sure thanks for the vlog 👍

[@stanm2.0]

Really great...I loved the detail of both the filming and the cleaning. The re-building / restoration of the engine was on a next level. You are at the top of the list for this. Keep the content coming.....@stanforadventure

[@FabriceTamburini]

Très belle restauration, good job👍

[@Manualtech-w1h]

Kerja profesional 👍

[@shawnschroeder2]

beautifully done...makes me want to rebuild every motor I own!

[@Motosportz]

Really nice work. The heating the socket trick was cool.

[@salc600r4]

Nunca voy a dejar de pensar que sos un Número 1,👏👏👏👏🇦🇷✌

[@gazza116]

an artisan at work.

[@porkchop803scwilliams9]

Beautiful work,God level

[@alex21251]

Complimenti,lavoro eccellente.

[@emulmulyadi]

Enak sekali melihat anda bekerja, saya sangat menikmati alur kerja anda, terimakasih 🙏