O/K. First thing you need to know is the screws retaining the circuit board are TORX T5. You need one of these (very small) screwdriver heads. NO.... You cannot get a suction cup and remove the screen. It has to be heated with a hair dryer or heat gun first and the run something like a credit card around the edges to loosen the screen from the chassis...2nd disconnecting the screen ribbon cable be very careful Reconnecting it not as easy as it looks. there is little room to play with and you need to make sure it goes all the way in to the white line. 3rd....So the battery connection which way is up or down?????? My experience is the black wire terminal should be on the outside of the phone...
@leokate55593 жыл бұрын
Good help. I had to "Bake" phone in the hot sun, then use heat gun. Now I'm stuck. Cannot reconnect screen ribbon. any further tips?
@themekonlordofthetreens69833 жыл бұрын
@@leokate5559 I struggled to get the ribbon cable back into its socket. My fingers were much to big and being in my seventies my hands are not very steady. But I did it using some fine pointed piers making sure I gripped it the ribbon close to the white line. Tweesers might also work. It is best to remove the memory card if you have put one in because it can easily get trapped between the cct board and the chassis when you reassemble.
@user-ut8gh7ww9y2 жыл бұрын
I used "CR-V T4" and it worked well. First I tried with T5 and failed to unscrew some and even damaged some...
@bhadghuy51236 жыл бұрын
Excellent video. Thanks mate. I don't understand why it's so complicated. Other brands are very easy to change battery.
@artecno8825 жыл бұрын
more sells
@ziroplayz73125 жыл бұрын
Apple rn dont even let you change batteries . And if you try to use an off brand charger, your phone battery dies . Apple likes gettin all your money
@drmrinalkantinath43364 жыл бұрын
once my battery has been replaced for my Moto G 3, but the mechanic placed the cft with some sort of adhesive. May I use the suction cup (where to get it?) and refix it?
@ashwinipatel75713 жыл бұрын
What is price of this battery?
@DV4a16 жыл бұрын
Can anybody confirm whether removement of display without heat works or not?
@gyterpena5 жыл бұрын
No way
@socialfreak69005 жыл бұрын
you must heat the display, he clearly skipped some steps
@ziroplayz73125 жыл бұрын
It does , its just much more complicated without heating.
@user-ut8gh7ww9y2 жыл бұрын
I permanently damaged the hard-plastic border, when I attempted to do that without prior heating, because of this video.
@chikku1686 жыл бұрын
I have a moto g turbo A my display is kind of showing a colour change when I touch the center of display And also my camera flash is not working it is loose if i press the metal part where flash is it light up and when I let go the light goes What might be the problem Would it be fixable
@letsmakeitsimpletutorials66286 жыл бұрын
It is because of the faulty battery. Your battery is kind of swelling up which in turn pushing the flash connectors away from the board, also you may feel a slight bulge in the display. I would suggest you to replace your battery asap.
@chikku1686 жыл бұрын
LetsMakeItSimple Tutorials Yep it was the battery Changed it and it works like new But the screen colour still persists May be the display might have bended slightly i think
@MugilRajRamasamy6 жыл бұрын
me also moto g turbo iam also having the same problem in my phone flash light , loud speaker and ear piece are when I press on it and my display was popped out
@letsmakeitsimpletutorials66286 жыл бұрын
Hopefully a case of battery swelling, try changing it.
@akshaywakpanjar99676 жыл бұрын
Moto g3 and moto g3 turbo edition are of same battery? I want to change my g3 turbo battery, but in online only moto g3 battery are available not turbo one ...
@Yogi.5june19893 жыл бұрын
You can install Vivo y21 (2000mah) battery, I did yesterday. 🔋 (Battery price 250-300rs. + Service charges 100-150rs. = Total 400rs.)
@coolmehta0075 жыл бұрын
Hello sir I have replaced my Moto g3 battery authorized service center . after replacement my screen got pink lining . service center says after few days its becomes normal but my screen as it is.. What should I do ...
@prasannamoharana3035 жыл бұрын
How much they took for it ?
@coolmehta0074 жыл бұрын
@@prasannamoharana303 1800 rs
@ashkrv1234 жыл бұрын
@@coolmehta007 ask them to fix it... or go to consumer forum. because you get from authorized service center.. you have a edge here. and consumer forum is not that tough deal.
@gururaj41906 жыл бұрын
Where to buy it?
@abdurrahaman27105 жыл бұрын
Nice
@sathyanaik18225 жыл бұрын
How much of cost
@markallred19535 жыл бұрын
What is the screen-removal tool? It seems to be a SUCTION CUP. This video assumes too much knowledge in the viewer.
@arvindkumar-xn9fl4 жыл бұрын
Sir mera motorola xt 1557 hai uska battery pin tut gaya hai usme battery kaise lagau jaldi banaiye sir plz plz plzzzzzzzzzz
@PIYUSHKUMAR-ig2wi5 жыл бұрын
Its data will remain or we lose it ?
@ziroplayz73125 жыл бұрын
Its not the data your changing , so ofc it stays . The battery controls its power , not its memory mate.
@dattatraykendre13286 жыл бұрын
Where we get X-Longer battery for g-turbo 3rd generation?
@akshayrathod35966 жыл бұрын
Moto g3 original battery price kitni hai
@justarandomguywithoutaname87195 жыл бұрын
600 rs
@umeshpatil-eu5ss5 жыл бұрын
@@justarandomguywithoutaname8719 apane ye moto g 3 battery ki prize series centre ki batayi hai kya online milne vale battery ki?...
@phirangitfp93856 жыл бұрын
Bhaiya ye bettry ka ke upr bala taar cnectter knha milta hai or iska naam kya h
@gowthamipinky61145 жыл бұрын
Thanks for the video... Very help full
@ziroplayz73125 жыл бұрын
Helpful*
@shaikjaved4525 жыл бұрын
Add some background music for better experience of viewers ☝️☝️👍👍🙏🙏
@ziroplayz73125 жыл бұрын
I agree , it did feel pretty plain.
@phirangitfp93856 жыл бұрын
Battery m jo juda h ye iska naam kya h
@PatMan19666 жыл бұрын
Good '"how to" videos start from the very beginning. The video clearly has skipped forward some steps.
@ziroplayz73125 жыл бұрын
Yeah , it did feel abit off
@BlizzardDelta4 жыл бұрын
I just did a Moto G3 battery replacement. This really is all there is to it, but what's missing from this video is the part where you deal with the adhesive which holds the display to the frame. I used a heat gun, some plastic picks, and a lot of patience on mine. You're not going to slap a suction cup on it and pop it off in a few seconds like the video. The battery isn't going to just fall out for you when you get the back off either. I suspect the phone in this video was previously disassembled and all or most of the adhesive was removed before it was reassembled for the video.
@Dawid5g5 жыл бұрын
Doesn't show us how to heat up the screen and carefully remove it wtf. Also there is no sound. This whole video had no effort put into
@ziroplayz73125 жыл бұрын
Oh shut up . Your lucky these tutorials even exist
@carlosbarreto46954 жыл бұрын
@@ziroplayz7312 Who would miss if useless tutorials like this one didn't exist? If someone wants to make a tutorial, then make it right. The very first step to replace the Moto G3 is to open the damn phone.