Cammus C12 Force Feedback is actually very good 👌

Cammus comes with new design direct drive wheel bases and in that slim formfactor they managed to fit 12nm torque which is the sweet spot in my opinion for most of the sim drivers and all that in the most competitive price we have seen on the market. Just check the settings i share in the video and feel it for yourself.
here is giveaway from Cammus wich will finish in the next 12 hours - sweepwidget.com/c/78733-6cm91x4k
good luck everyone.

[@chepilevski]

There is link in the description in which Cammus Giveaway set of pedals and C12 and remains few hours. Good luck if you enter the contest 🤛

[@sloth_energy]

Note, there's a typing error in your thumbnail - *VALUE

[@arenam79]

I entered 🤞

[@dangerously9498]

Is the extra detail from software updates or is it the wheel itself? I'm planning to buy either this or the DDWB 15nm from cammus.

[@chepilevski]

@@dangerously9498I’m sure is just software control buddy

[@buddy5088]

Great review as always. I’m glad you reviewed this wheel. Other reviewers make little effort to play with the software settings and dial in force feedback. Instead, their reviews are skewed and influenced by other reviews. As always, appreciate the honest reviews and content!

[@L0RDdigital]

Another great video. One suggestion will be to use T-Handle Hex tools as this will for sure provide more motorsports feel to your videos.

[@chepilevski]

Like the idea bro 😃

[@theoldgitwatgames4640]

Cammus certainly seem to have come a long way, and the offerings they have now are really tempting for anyone starting out down the rabbit hole of direct drive. I got tired of waiting for anything affordable around the 12-15nm mark and built my own DD wheelbase, but if this and moza's bases had been out then I would have gone for them.

[@disast1ckup]

Wait you built a wheelbase?

[@theoldgitwatgames4640]

@@disast1ckup it's not that hard considering most DD wheelbases are servo motorbased. For a cheaper option there's ffbeast that uses old hoverboard motors and can get up to I think realistically about 12nm of peak torque. I think that one's a really cheap option as most if comes to just under £200 if you hunt around for the parts.

[@NachoRacingTV]

Great review as always!

[@chepilevski]

Thanks for the support buddy 🤛

[@v_zmitrovic8273]

Thanks for new video! Agree, C12 is quite good for it's money

[@chepilevski]

I was pleasantly surprised for sure 😃

[@jufejufinho]

Cammus was a real contender when I was deciding for my base. They really are bringing a different alternative to the table. I might end up buying one for my wife 😅

[@chepilevski]

Will be fun racing wife bro 😁

[@jufejufinho]

@@chepilevski we started like that in fps games, now she kicks my ass in some of them, so i expect everything now

[@chepilevski]

@@jufejufinho how cool is that man 😃 you are lucky guy bro 💪

[@jufejufinho]

@@chepilevski absolutely 😎

[@discodan2265]

How good is sim racing these days champions!?! ❤❤❤ And Stel ur mic levels are now spot on brother. I remember back in the days u were quiet as a mouse.😊 That passion is brimming mate. ❤

[@discodan2265]

Gotta add the form factor of that base 🤯🤯🤯 how's the heat levels?

[@chepilevski]

Thanx Dan, happy to hear sounds are better 💪 In the settings i use that unit was getting just slightly warm without using the fan ! But those days in Germany is like almost winter 🤣 I guess will be fine in the Sommer too and the fan if is needed must do the job !

[@discodan2265]

@@chepilevski that's good to hear man. Where I live East coast Australia it's pretty much 26° all year round. I always use aircon anyways as my media room is like a sauna 😎 once all my toys are fired up! Loving WRC in VR lately 👌 Monte Carlo is obscenely difficult but that just makes it all the better! I'm currently trying to get used to a mid engine wrc build. Hardly even need the h/b 😚 Throttle control and biting that late brake is addictive albeit damn frustrating at times. Have a great week mate! 😀 🍻

[@chepilevski]

@@discodan2265 oh man, when I fire up all in my room, i don’t need heating at all 😁 Have a great week too buddy 🤛

[@piedpiper1172]

Dear fellow travelers: Per multiple reports in other videos and written user experiences: Adding a washer to each of the six bolts will allow wheels that don’t have the center cut out to fit this base without the issues he encountered here. Good luck on the journey to deciding what to buy. I’ve decided to go with this one. - Dear RBM, As always, wonderful video

[@chepilevski]

Thanks for the report buddy 🤗

[@piedpiper1172]

@@chepilevski I binged all your content about a year ago, and told you my plans before I built a sim set up for my aging father who could no longer drive his heavily modified 2010 SS Camaro. He’s had two strokes since then, but he has gotten huge fun out of what I built for him, even when he couldn’t use words to express it anymore. You took the time to answer questions I left for you, and to give your insight and feedback. That feedback really helped me. Thank you. You helped me achieve my goals at the time, and you helped make my father’s life that much better. I will always have warmth in my heart for you, and for the time you took out of your life to answer my comments and help me. Human to human, man to man, I cannot express how much it means to me. Keep driving for joy, broski.

[@chepilevski]

@@piedpiper1172 man, that is really emotional post to read. If it dreamed anything to achieve with my work on KZbin is exactly that I’m feeling now with your post and story ❤️ Thank you so much for sharing that and I’m so happy for you and your dad 🤗 Big hug for both of you

[@piedpiper1172]

@@chepilevski You deserve it! This is what happens when people share their passion and are generous enough to share their time and insight. 💪🤗❤️

[@tomvernon9691]

I've entered the giveaway, I was waiting for your review before deciding whether to get it and now I have decided. If i don't win I'm getting it anyway

[@jRoundHouseNinja]

Killer starter setup for sure.❤

[@antjones2281]

Great finisher too 😅

[@chepilevski]

It is indeed both 😃

[@TZAG]

C12 looks perfect with the SRS Simracing Lenkrad RR320.

[@zola7074]

Professional Man 👌

[@obiwan1404]

Hi, when you did the software installation and you came to the driver installation portion. Did you leave the three boxes for the drivers checked and did you answer yes or no when it asked to remove associated components before the install. I'm only asking because i had trouble with my first wheel after software installation, and communicating this to Cammus is difficult due to the language barrier.

[@chepilevski]

Oh man, I don’t remember at all that part 🙈

[@obiwan1404]

It's been difficult to get an answer to this question. Regardless, thank you for at least responding

[@CDubLDD]

I’m thinking about getting the Moza R12. Would you recommend the Moza or the Cammus?

[@chepilevski]

If you want to save cash and you are happy with one wheel, the C12 is amazing for sure! If you plan to change wheels in the future, R12 will be better choice!

[@Pillokun]

to all ney sayers with such a motor solution, many hybrids use such motors especially lorries/semi trucks. ie big diameter motors that are very thin construction/design just like cammus here.

[@chepilevski]

Cammus produces electric go karts and probably takes it from there 🤔

[@georgfranko]

I love what Cammus give for the money , but I just can’t make myself like the look of it

[@chepilevski]

It is not the prettiest for sure but it is great for the price for sure 😃

[@piedpiper1172]

For 50% off vs all other options, I can do a little sanding and painting.

[@jordankelly4684]

Really glad this wheel doesn't look like it was made by fisher price like their 5nm or 15nm. Was my biggest gripe with their products.

[@chepilevski]

It looks way better indeed 🤛

[@jacklamotta0765]

Have you testet the Club Sport dd+…? You will? Greets from Germany

[@chepilevski]

I’ve tested it in the last expo on iRacing and was insanely good with the settings they had it there! Definitely great base 👍

[@reviewforthetube6485]

Its the best base ive used all year tbh. ​@chepilevski

[@reviewforthetube6485]

The c12 ffb is absolutely insane. They are matching some of the better makers somehow lol I think the design to the base is very special and they may be Abel to surpass the beat makers at a much less price due to how direct it is. It's attatched like no space you are gonns get a good experience. Idk how they can sell it at this price but they just changed the market at 10 to 15nm. 12nm is perfection for most. Def seeks like it surprised you alot.

[@chepilevski]

I didn’t expect to be that good and direct! Also the many said doesn’t have detailed FFB but I guess was down to proper settings! It is really good and can be also super smooth or super harsh and anything in between! It is definitely matching the rest I’ve tested

[@reviewforthetube6485]

@chepilevski that's really the issue even with other bases from brands is people don't truely understand settings. Like people who turn all dampening off, all spring force, all everything and only turn on the ffb power. It's like you do realize you are draining all effects right? Or weight, or return speed like the counter speed and reaction etc. People don't get it man.

[@antjones2281]

I love my C5 & C12 nothing matches it. What is that F1 style rim you are using at 1:28? I've been looking for something like that .

[@chepilevski]

It is called Sport Line 300 but it is not ideal for that button case as touch the button guards and interfere with the joystick and the 7 way switch. I hope Cammus will produce something for the C12

[@antjones2281]

@@chepilevski I think I can design something and print it to solve that, thanks!

[@szarvadyjazon]

Great review! 🙏 Do you have an update on the ddwb15 if it has received any ffb setting updates since your review 1yr ago? You said in the review that is what is holding that wheelbase back from greatness.

[@Fly737]

❤❤❤

[@kykykykykykyky3964]

consider adding english subtitles

[@arenam79]

Im a peasant using a g920 i'd love to have this wheel and its the only thing close to my price range but I'd still need to starve my 4 kids to buy it so its a dream to have one day..

[@jordankelly4684]

Kids are resilient, and inquisitive. They'll figure out how to eat, go buy that wheel 😂

[@arenam79]

@jordankelly4684 You're right, there's plenty of rocks and dirt in the yard. That's what we ate as kids..

[@HellRainGod]

🍻👊

[@fcukinwhat4714]

Thanks for sharing with us bro👍👍👍

[@SIMRIG412]

1 major downfall of this c12 is you can swap rims easily and no qr. besides that it’s decent for the price!

[@chepilevski]

That build have also zero flex which I forgot to mention 😁

[@hohiss83]

1:28 what happened to these screws 🤕

[@chepilevski]

That wheel doesn’t fit perfectly in that button box and I had to make some modifications 😁 Because of the shape in the center it touches the buttons guards and I was afraid to tighten too much to not damage the trades. That’s why I say Cammus need to develop there own cut wheel 🤛

[@hohiss83]

@@chepilevski 😁🤜

[@AmmarMo-gm6re]

I live in Egypt, and I have to pay 1200 $ for it stupid as f

[@chepilevski]

Oh god 🙈