Can-am BRP secondary / driven clutch torsional spring install

[@Yippa391]

Been fighting this damn spring for a month. Thank you!!

[@kbone7913]

Thanks for the tips! I had purchased my a 2011 Cam Am Commander from a private party, who had an issue with the rear differential they had purchased from Mudd N Wheels. I had sent the diff in and they honored the warranty, however we still couldn't get the car to in gauge under load. So when I inspect the belt I found that the Tightening Bolt for the secondary clutch had back all the way out. I hope once I reinstall with red lock tight, I'll have the issue corrected.

[@viper7077]

this video just saved my ass!

[@HossTexan]

Great video adam thank you!

[@voip3704]

Thanks man!

[@Bamabrute85]

Do you do clutch work for the Brute Force? Didnt see it on your website.

[@204_RENNY]

If I bought a new replacement bolt, would I still need to use loctite?

[@AirdamClutches]

ALWAYS use loctite on the secondary bolt or its going to back out.

[@vanessalewis1023]

Can I use the spring that don't have the pins on a secondary and helix that has the holes in them

[@AirdamClutches]

yes you can use a torsional spring or a flat bottom compression spring in these applications, can-am uses both and the stock secondary and helix will accept either.

[@teontaveal35]

Standard or fine thread ?

[@bradhartman7402]

When you use the red locktite do you have trouble getting the bolt back out

[@AirdamClutches]

yes, if you use red loctite it can be almost impossible to get out by double-nut method. you will need to weld a nut to the end of the stud

[@bengalscin]

I’ve got a 2016 maverick. But the spring don’t have that extra tit to hold it in place ? Suggestions?

[@AirdamClutches]

not all can-am have torsional springs. You can watch some of my other install videos to see how to put together a secondary with a standard compression spring like the stock Maverick spring.

[@bengalscin]

@@AirdamClutches thanks

[@vanessalewis1023]

@@AirdamClutches can I use the spring that does not have the tips on it but my helix and back of secondary

[@williamblair35]

3rd video?

[@jeffbelanger1596]

tu