Can-Am Outlander SNORKEL KIT!!! Step-By-Step Install Tutorial / 2022 Can-Am Outlander 859 XMR

In this one I install the Can-Am snorkel kit onto the Can-Am outlander 850 XMR. This install will be the same for all sizes of Outlanders. If you have any questions leave a comment below.
Can-am Snorkel Kit: 715002518
As an Amazon Associate I earn from qualifying purchases
TOOLS I USE!!!
DeWalt Impact/Drill Combo: amzn.to/3F0m5sF
T-Handle Allen and Torx: amzn.to/3KTHRSF
Socket Set Kit: amzn.to/41Om6d1
Bike Stand: amzn.to/3Zyig5Q
amzn.to/3ZFf34y
Tire Spoons: amzn.to/3mtIoRb
Rim Saver: amzn.to/3ZJTRKq
Hear Are the links for the products I have installed on my Sur Ron
JFG Foot Pegs: amzn.to/3SOwZHA
Kemimoto Foot peg support bar: amzn.to/3Jfergv
Plug and Play Headlight Kill Switch: amzn.to/3EYtAjS
JFG Handlebars: amzn.to/3SPFhim
Pro Taper Pillow Top Grips: amzn.to/3ZC0LBw
JFG Rear Mud-flap: amzn.to/3KYC0LW

[@michaelblake84]

Was a perfect how-to video! Took me 90 min start to finish to do this while install. Thanks for the great instructions.

[@Maxsmotoshop]

Glad it helped!

[@ElplebeTex]

Best video I’ve seen on this install yet. You got yourself a new subscriber.

[@Maxsmotoshop]

Thank you for the support I greatly appreciate it👍

[@joekalnins]

Don't you need to extend those clear hoses and zip tie them to snorkel hose ? Last video I watched it showed them doing that.

[@mpfoote]

Thanks for the video. I used a Dremel to cut out the holes. Way easier than whittling away at it with a razor.

[@Maxsmotoshop]

Awesome I bet a Dremel worked pretty good I just like to use tools in my videos that I know everyone has at home

[@tomloomis7555]

Awesome video, thanks for that..i'm doing the same install tomorrow

[@Maxsmotoshop]

Glad it helped

[@sethlanterman8977]

That gauge cover does it just come right off? What is it held in by?

[@napoleonthestud7244]

Hey buddy which one I can by for my can am 700 xt?

[@Phillthyphill99]

Great video, very clear explanation..👍

[@Maxsmotoshop]

Thank you🤙

[@exodo360hi8]

can you have a speaker from kicker with a rage mount with the snorkel

[@Maxsmotoshop]

I’m not too sure about that. I haven’t seen that system yet.

[@blkwng81]

What about the cvt intake amd exhaust

[@Maxsmotoshop]

Yeah, it’s not the best snorkel kit

[@kaydenregister]

What did you do about the hole on the side

[@Maxsmotoshop]

You have to order a new cover without a hole

[@dallonspendlove5671]

I have a little older model it’s a 2014 will the snorkel work and fit correctly?

[@mikelebarronjr3480]

Great Video ..But what about the big whopping hole on the other side of the benzel ?

[@garyholly8376]

I have the same exact question. I just installed this and i’m not very happy with the large hole on the side.

[@anthonyrobinson3639]

That's the original cover,you can go online and get the basic cover without holes in it.

[@tonyaponte9834]

Very clear and covered every detail

[@Maxsmotoshop]

Thank you I hope you found it helpful and straight to the point👍

[@Jason000111mmw]

Great video. Now I had the dealership install mine. Now when I get in the throttle it sounds like it’s starving for air. And idea what that can be

[@Maxsmotoshop]

Check the tubing coming out of your airbox make sure there are no bends and it is free and clear out the top of the snorkel

[@Jason000111mmw]

@@Maxsmotoshop that’s what it was. The air hose was kinked

[@Miami1kXmr]

Followed everything on the web, but only C1 template appears.

[@Maxsmotoshop]

At the 40 second mark of the video I show exactly where to go and print off the templates👍

[@JamieSchaak]

What about the transmission intake ?

[@Maxsmotoshop]

This kit does not vent the transmission intake only takes care of the motor

[@Switching-Cars]

Verry nice and helpful video, only thing i would of done is extend the rubber line to the top. Keep up the good work

[@Maxsmotoshop]

👍

[@jacobdeslauriers6768]

If u go that deep ur belt box will be full of water anyways

[@r1l3yclift42]

That’s what I was thinking about the belt too

[@mokusgomboc954]

Tank you , super video !!!!!

[@Maxsmotoshop]

You’re welcome I’m glad you found it helpful👍

[@ryank8642]

What about the other tubes that comme out of there? I believe its the clutch breeder, should i extend the tubes in to the snorkel? Thanks.

[@Maxsmotoshop]

If you can figure out a way to do so it might not be a bad idea or look at a different snorkel kit

[@ryank8642]

@@Maxsmotoshop ok thanks great tutorial!

[@barrymcglashan6020]

Will this work for a Outlander XT as well? Thanks

[@Maxsmotoshop]

Yes it will

[@Jordankremers]

Hey just a quick question does this raise the air intake and clutch intake?

[@koltenpatton7089]

No it doesnt

[@Maxsmotoshop]

Yeah, I was surprised this kit did not, but there are other kits available that do from Can-Am

[@neokane]

Do you have any videos on the plow limit switch install?

[@Maxsmotoshop]

No I have not had to install one of those yet

[@shayan202]

how did you cover the hole on the right side of the display casing?

[@Maxsmotoshop]

Your options are to leave it there or buy a new cover👍

[@connerbergeron7838]

would there be no possible way to leave the original cover on that side and essentially only drill the rivets out on the other side to keep from seeing that hole?

[@annexoffroad]

​@@connerbergeron7838 I was just at the dealer and they suggest buying the XT cover for $25. It doesnt have the hole.

[@This_Guy1]

This product is pointless.... The only thing extended was the CVT intake... The CVT exhaust and air intake for the engine still sits at the factory level, so you gain nothing but appearance. The installation video was well detailed and informative. It informed me not to waste my money on it.

[@nicholasdavis6777]

your actually wrong. the intake for the engine is getting raised. The cvt exhaust and the cvt intake are staying in the factory positions. id rather get water in my belt box before my engine.

[@This_Guy1]

@Nicholas Davis your right about which intake it is. But once your belt box gets full of water you aren't going anywhere. You are much better off getting a full snorkel kit for the same price.

[@mikejd1364]

So this is only for air intake? What about cvt?

[@Maxsmotoshop]

You’ll have to talk to Can-Am about that one I just install the product

[@SeanDube97]

I just bought a outlander xmr 570 & im wondering if I install the horn If it will affect my warranty?

[@Maxsmotoshop]

No it should not affect your warranty this is a can and product👍

[@garret47]

No sir it won’t

[@Oneo1mann]

Will this fit my 2023 xmr 1000? @Max Moto Shop

[@Maxsmotoshop]

I believe so, but look at one of the other kits, but actually snorkels the CVT as well

[@MygarageIL]

Can i comment on the jz commercial?

[@Maxsmotoshop]

Jz commercial?

[@tobytoofast]

Will the kit fit the same on a non xmr 850?

[@Maxsmotoshop]

Yes you’ll just have to use the other set of templates to cut a hole in the middle and on the left side of your cover refer to the instructions for placement of those templates

[@adventureswithzach2207]

I’m looking at the 2022 can am outlander 450 dps, will this kit work on it?

[@Maxsmotoshop]

I think the consul cover is different on the 450 or you might need a different kit

[@rydergotham6172]

What happens with the hoses

[@Maxsmotoshop]

They are pointed upwards and ran alongside the air intake

[@Maxsmotoshop]

This snorkel does not allow you to go any deeper than stock because the clutch breather is still at the same level and will fill with water👍 can-Am products

[@MrPontiacfever]

a white sharpie cost 79 cents to outline the template.

[@Maxsmotoshop]

OK sure but not needed

[@redimido4u]

Key word: DREMEL😅

[@BnMProductions11]

Does this kit not relocate the CVT intake and exhaust?

[@olegk455]

Not this kit. This one is their cheapest kit which only does the engine air intake. Which is all you need for the most part to not get into a lot of trouble.

[@garret47]

This snorkel for the air intake or belt intake ?

[@Maxsmotoshop]

This kid doesn’t do the best job but there is another Can-Am kit that does a better job of snorkeling the clutch

[@98Z71]

"Tim plates"

[@Maxsmotoshop]

???

[@joeyboy3209]

Seems pointless for an extra 10 in of airflow

[@BearKiller-z1p]

Come on bro, ...a knife ? Lol

[@Maxsmotoshop]

Yep no special tools required. Everybody has a knife but I guess not everybody knows how to use one. Lol ha ha ha OK bud

[@sheluvwkeys8278]

these snorkels make no sense because once you get up to the radiator and it goes underwater your belt will get wet and the only snorkel going up is the intake and the exit will still be underwater so i think these snorkels are useless

[@Maxsmotoshop]

Yeah I would not get one personally

[@sheluvwkeys8278]

@@Maxsmotoshop yeah i’ll prob just make some my self to be honest or get warrior riser

[@sheluvwkeys8278]

@@Maxsmotoshop i would get one if there was a 3 way connect or something like that connecting them toghter but there isn’t

[@djsmith3959]

Wouldn’t swamping the belt box be 1,000% better than swamping the engine though? 🤷‍♂️

[@that92chevy]

their made for a XT not xmr