Canam Outlander Snorkel Kit Install - Warrior Riser 2019 SYATV

Brandon brings in his 2018 Can-am Outlander XT 850 and we install a Warrior Riser Snorkel kit from SnorkelYourATV.com
It took us 2 long nights from start to finish. But we finally got her done and it looks GREAT.
Number 1 recommendation from us at LC Powersports when doing this install is to NOT be in a rush! Take your time and do it right.
Please feel free to thumbs up if you like the how to video and comment with any questions and we will do our best to answer or help in any way.
Please consider subscribing to our channel
God Bless!

[@DirtObseXXion]

I'm only half way through but great friggen job so far! You have me completely convinced that if someone want's to do any sort of mud riding, the CanAm is the way to go! Brandon made a smart move picking that machine up, the snorkel looks killer!

[@LCPowersports]

It is a beast in the mud for sure.. and canams intake design along with the exhaust for the belt is very well designed and located high enough stock to be able to go thru some relatively deep mud holes

[@austinlandenn]

just spent hours using this as a guide and it absolutely helped out a lot sayin this is the first time me and my dad has done a snorkel job, THANKS !!

[@TOXICXMR]

This Video is EXTREMELY accurate and detailed. Should be on SYA Website as their instructions SUCK! Great Job guys!!!!!

[@LCPowersports]

Thanks!

[@beardedpatriot0]

Starting my install tomorrow. I'm sure I'll be back referencing this video

[@LCPowersports]

Have fun lol

[@southernswampboyz5784]

What size risers did you have on the sides

[@johnkappeynevandecoppello2447]

Where did you mount the fu box?

[@codymayo1604]

Did you have to do anything to fit those tires?

[@johnwilson4564]

Quick question I have the same set up and was wondering will the OEM rad relocate kit fit with the risers

[@johnkappeynevandecoppello2447]

What is the part number for the rubber seal kit.

[@dextermartin4181]

By far the best video for the warrior risers, thanks. Also, how did/what did you use to get the pre-made engine intake connector inside the cut factory tube? Thanks

[@LCPowersports]

Thanks! I can't fully remember unfortunately 😑

[@dextermartin4181]

No worries, I'm sure some form of ingenuity will find me lol

[@LCPowersports]

@@dextermartin4181 haha yeah it was not fun installing it

[@vampire5705]

Getting some soon for my 450 gonna be a lot but it should pay off👍

[@LCPowersports]

Oh yeah man I love them

[@goldendragon1085]

I have a red 450

[@vampire5705]

@@goldendragon1085 recently upgraded to the xmr 570 don’t need right now 👍

[@goldendragon1085]

@@vampire5705 Nice mate enjoy the ride

[@JGLEZ69]

thanks

[@rickygreer7288]

Blake..Yall bring it on down to Burdens and try it out this weekend at the Bash..Brother...

[@throttlepinnedatvsxs]

Can you do an update? How is the snorkel kit holding up? Have you had any leakage problems?

[@LCPowersports]

I'll do a update video but yes its holding up great

[@destinhook3826]

very curious, can you purchase the factory XMR snorkel kit and put it on a regular Outty?

[@LCPowersports]

Yes. I was gonna go that route but then decided not to.

[@blanetullier8818]

Is the hole saw the same size for all the holes

[@LCPowersports]

I believe it was!

[@Piratefluffy]

What did you use for a Silicone? I'm halfway through this install myself and am now questioning whether or not I picked the right silicone for the job. Used some all weather construction sealant from local Menards (White Lighting Stormblaster, tripolymer elastomeric sealant) but just now found out that this stuff is more geared towards roofing applications. Probably going to end up re-doing the silicone.

[@LCPowersports]

We used pipe cement for the fittings and used a airbox seal from warranty killer performance.

[@LCPowersports]

But if you need some use ultra black brand silicone it will do the job!

[@zacharyjackson9091]

How did you re mount the fuse box? Just use like a double sided tape? Or did you run zip ties?

[@LCPowersports]

I think we just zip tied it

[@willcole2398]

Did y’all use dielectric grease on your electrical connections?

[@LCPowersports]

I did on the ones I could get to easily.

[@eugenebernadski6526]

How far do the snorkels stick out? Trying to figure out if the oem rad relocate kit will fit together with this kit

[@LCPowersports]

I will work iv seen people do it they don't take up much space at all

[@coltonhoyt2740]

Where did you order the kit from? I ordered one for mine and it was not a warrior riser kit so I need a good site that I can order from and not get burned again. Thanks!

[@LCPowersports]

I got it on there site.

[@zackg8129]

Do you know if the install would be any easier with the xmr 1000? Thinking about getting this kit.

[@LCPowersports]

I think it would be!

[@FakeDongers]

curious if you had to extend any vent lines other than the 4 that are already up top. see some guys with 6 vent lines running up the snorkel.

[@LCPowersports]

Iv only used 4 and haven't had any problems.

[@joshuabrown4864]

What size vent tubing to fit inside the warrior risers? I'd like to get white colored vent tubing

[@LCPowersports]

I don't remember. I don't have the machine anymore or I'd check!

[@josephseres7080]

How long did it take for the install?

[@LCPowersports]

I'd say I total 4-5 hours its a was a pain but its still doing good with no problems

[@big_ute]

This vid helped unfuck the instructions they sent, had to cut a bit more from the pod but it installed very nicely.

[@zimnyful1]

Hello. What is the diameter of a flexible plastic pipe? Greetings from Poland

[@LCPowersports]

I believe its 2 inch

[@carterreisig6267]

Did you use a grease or silicon that is going to dry because it looks a little like grease to me

[@LCPowersports]

Whats that?

[@nickglass6995]

How many vent lines should be ran up? Just got mine done at the dealer and they only ran up 2 lines through the snorkle

[@LCPowersports]

I have 4

[@kingdon9690]

So having a different setup on my 450 outlander mine didn't come out as good as this. It looks alright, but the instructions were crap. I cut in all the places it showed to cut holes. Seems like the airbox breather doesn't line up like yours. Either way it's on, now my question is did you guys use the screens on all of the snorkels?

[@LCPowersports]

We used them on the air intake breather and the belt intake you don't need one on the belt exhaust. And yes it was a pain to get it all to line up!

[@kingdon9690]

@@LCPowersports awesome ty that's all I have left to do on it. I got it with the Halo lights but they wouldn't work on it. So those are gonna be used as front lights instead.

[@jayd6916]

What size drimmel did you use?

[@LCPowersports]

It should say in the video

[@Austin_capp]

What all tools do you need to do this I’ll be putting my warrior risers on my xmr 570 next week

[@LCPowersports]

The warrior riser kit for your XMR should be a lot simpler install than it was for this XT model. You may need a dremel tool, flat head screwdriver, Phillips head, maybe a couple metric sockets or wrenches. PVC glue, and a couple zipties.

[@LCPowersports]

Like i said it should be a lot simpler for the XMR since the xmr is already snorkeled to the front of the handle bars.

[@josenavarro6293]

can i ask what tire sent u running ?

[@LCPowersports]

I had 29.5 outlaws2s.

[@vinniamadeus496]

Whats the name of the panel screwdriver?

[@LCPowersports]

I'm not sure! I will have to go back and watch the video!

[@mrmcsweat2177]

Do all those parts come with the snorkle kit

[@LCPowersports]

Yes

[@joshuacrawford4122]

Including the air filter box seal?

[@LCPowersports]

I bought that separately

[@treytonodom3338]

What size tires? Any lift?

[@LCPowersports]

29.5s outlaw2s and no lift.

[@chadswartout4031]

Brandon,.Blake or Joel, I NEED your help!!!!!! I have a 2021 c Force 500 that I am about to snorkel with a warrior riser kit. I've seen this video snorkeling your outlander and let dirt flies video snorkeling their cforce 600, but there are no videos on KZbin showing how to do it on a 500. Can you post one or direct me to a video that I can watch?

[@LCPowersports]

I will get with Blake and see if he has made one!

[@coltonspeer3005]

How’s the setup with just the snorkel? Do you over heat much in the mud will you be adding a rad relocate

[@LCPowersports]

Iv had it over heat and go into limp mode once and i was in some deep mud on a really hot day other than that its been good! Iv been on the line on getting a rad relocation but I haven't had enough problems to go ahead and pull the trigger!

[@coltonspeer3005]

@@LCPowersports awesome thanks for the info! I got a 2021 850xt with a snorkel on order thanks for the response

[@LCPowersports]

@@coltonspeer3005 take your time and have patience lol its worth it in the end! And don't forget to get you a air box seal! It helps to heat it up with a heat gun to get the air box to close all the way if you can't get it closed!

[@coltonspeer3005]

@@LCPowersports Thanks for the tip! Definitely will be a nights work.

[@LCPowersports]

Definitely

[@Winnipeg_Jets_Fan]

I'd like to get this done on my 21 Max 850, but it looks like more than i am willing to tackle lol

[@LCPowersports]

Lol yea it was not fun installing i would pay someone to do it before I did it again 😂

[@eliosantiago1329]

Hi, just install most of the riser but I my cam an do not have the vent line run to top. Wonder if you guys can help me to know where do they come out from.

[@LCPowersports]

I would have to look and see. Do you have a Facebook?

[@eliosantiago1329]

@@LCPowersports no I do not use social media. But you said at the beginning of the video they go to the differential, air box...... but I have 4 line and like to make sure before.

[@LCPowersports]

@@eliosantiago1329 yeah it should be 4

[@eliosantiago1329]

@@LCPowersports okay but where do they go to?

[@nombr]

Good video! How would a guy go about taking off the risers? I need to get my air box opened up to clean it (swamped the quad:( ) lol

[@LCPowersports]

Just pry up some to get it off under the seat

[@nombr]

@@LCPowersports ok thanks, should I heat them up at all to get the glue to loosen up ? I didnt install them on the quad

[@LCPowersports]

@@nombr that would probably work

[@loganpait3729]

I have a 2021 can-am outlander 450 if all my stuff is ran up to the handle bars like yours does that mean I can take it up to there and not worry about water or is there other stuff I need to run ? I haven’t made it completely threw the video so sorry if I missed something

[@LCPowersports]

Just make sure everything is sealed off the only thing I did other than the kit was I got a better seal for the air box. Iv been to the top of the snorkel tips and haven't had any issues.

[@loganpait3729]

LC Powersports ok so it can go over the exhaust as long as the air box and belt box and stuff like that is water right ?

[@LCPowersports]

@@loganpait3729 yeah thats the way mine is

[@loganpait3729]

LC Powersports ok I don’t have the kit tho I just have the 3-4 lines and the little belt box thing ran btw so do you think I need the kit or should it be good as long as I’m not over the lines and belt box thing sorry if I’m aggravating lol I’m just not trying to total a new fourwheller

[@LCPowersports]

Your good man! I'm not totally sure. If it was me I'd put a kit on it

[@SuperReddog17]

wow looks great but hot dam that's a lot of work.

[@LCPowersports]

Definitely... but it pays off in the end... But while your installing it; u will be saying "I should of got a XMR

[@youraveragenightx4135]

@@LCPowersports Is it easier to install them on an Outlander XMR?

[@LCPowersports]

@@youraveragenightx4135 im sure it is lol ill always buy xmr from now own 🤣

[@youraveragenightx4135]

@@LCPowersports I’m getting a 2021 Outlander XMR 570 and I plan on installing Warrior risers for it.

[@LCPowersports]

@@youraveragenightx4135 yeah I think its alot better on those

[@groundupexcavation]

I’m looking at this kit but I’m trying to cut as little as possible. The description on their website said you only had to cut 3 holes in the cover part. That looked like a lot more than 3 holes. Did y’all have to leave the splash guards off as well?

[@LCPowersports]

We did but you can trim them to go back on. Its only 3 holes but there is more cutting under the plastics. It was honestly more than i wanted to do but I do like the kit.

[@groundupexcavation]

LC Powersports yea that’s my issue. I mean mines a 2014, but still don’t wanna chop it up so to speak

[@LCPowersports]

@@groundupexcavation I think its about the same with any kit though.

[@groundupexcavation]

LC Powersports I had my belt exhaust run up into the pod at one point but my mistake was where I cut some out of the right side splash guard let water run right up into the pod when my tires were spinning in water

[@LCPowersports]

Ahhh yeah you don't want that

[@battleforntkids5575]

Lol I took mine off and daum I musta put my bike threw some work

[@canadaplace2be176]

Can ams will fill up. Full of mud the hole filter gets mud in there. But u guys might be abel to do it.

[@dakotastepe]

On a scale of 1-10 how much of a pain in the ass would u say it is to do this I kinda wanna get snorkel risers but I also don’t wanna shoot myself

[@LCPowersports]

I only shot myself one time lol. But it was a pain to do even with help!

[@dakotastepe]

@@LCPowersports dam lol I’ll just stick to trying to hydroplane everything lmao

[@LCPowersports]

It was definitely worth while though

[@dakotastepe]

@@LCPowersports I’d imagine my biggest fear is snorkeling mine and going deep and forgetting something and sinking it

[@LCPowersports]

@@dakotastepe I feel you! Just gotta double check everything!

[@daynelycett155]

How do you access the fuse box after the snorkel install? Sawzall?

[@LCPowersports]

I had to just use a light bead of silicone and pull them off then pop the display panel off. Kinda annoying but I haven't had to do it but one time.

[@rogerfuller7876]

One thing about can am that Polaris will always have over can am, beefy prop shafts and a good rear diff, Polaris fronts aren’t the greatest but that comes from people’s negligence

[@OMRS1]

Well Polaris’ rear “diff” is the trans. I’ve seen more issues with the Polaris trans with their retarded turf mode shredding into chunks and completely fucking the case and rest of the trans more than I’ve seen can am destroy their diffs.

[@LCPowersports]

I guess it depends on how you drive them. To me they are all pretty decent machines! We just beat them to death 🤣

[@jameskuypers5830]

Do you have the directions for this still?

[@LCPowersports]

I do not

[@jameskuypers5830]

@@LCPowersports okay thank you, we bought a warrior riser kit, but we bought it for the XMR, we own a outlander XT so the pipes won’t fit

[@jameskuypers5830]

How would you rate these snorkel kits? Have they held up good?

[@LCPowersports]

@@jameskuypers5830 mine is still holding up great

[@canadaplace2be176]

XMR. will fill up full mud believe me...

[@LCPowersports]

I added a seal from warranty killer performance and iv had no problems since

[@cheesefarmer3545]

Snorkels before rad? Man, did mine the other way around, it's easier in the long run

[@dudeethan2593]

Is the website legit

[@LCPowersports]

Yes

[@dudeethan2593]

I’m about to order a snorkel for my Can-Am 450 outlander.How long does it take to come in

[@LCPowersports]

Took a few days.

[@kingdon9690]

@@dudeethan2593 I ordered mine like last Thursday and got it yesterday which was quicker than expected. Yes its a fight, and if you have a 2020 outlander 450 expect a headache taking the whole front plastic off. It's not like this model you see here, no access panel under the rack. It's all one piece on the 2020. Took me hrs just to take that apart because no one on here has a video of it.

[@canadaplace2be176]

Warriors rissers are dirty bastards. U need. To burrie this in mud. Who wants to buy a mud buggie