Can i fly a 3d printed VTOL? Titan Dynamics Hornet tiltrotor tricopter VTOL using INAV not Ardupilot

  Рет қаралды 3,031

Locars Hobbies

Locars Hobbies

Күн бұрын

Пікірлер: 27
@tsmith6669
@tsmith6669 3 ай бұрын
You and people like you who go out and push the boundries of aeromodeling are legends.
@locarshobbies
@locarshobbies 3 ай бұрын
Why thank you! i appreciate this sentiment! i love technology, and love trying new things out! Kudos more to the designers making this possible :)
@christopherhughes6519
@christopherhughes6519 Ай бұрын
Heck of a project, good luck working through it. I started printing my first plane last night with Overture Air without any luck. I was told you could print it like regular PLA and obviously I was doing something wrong. Fooled around with temps and print speed and it was better but not looking anything like your prints. Can you share your configuration changes to get those results.Thanks and good luck getting that beauty flying 100% like it looks in your mind's eye.
@locarshobbies
@locarshobbies 29 күн бұрын
Hey mate, my bad, ive been off the YT recently, so much going on! i realised your comment came 2 weeks ago and i haven't responded, MY APOLOGIES!!! So, in all honesty, i am NOT really a huge fan of pre-foamed LW-pla, i get the idea for sure, but yeah, i think for the additional stringing that it does, it doesn't give that much weight benefit (i beleive in my prints they are only about 80% the weight of normal PLA+ If im really going to give it a red hot go, i will use foaming LW PLA, at least with the increased difficulty of printing it, the weight differences are huge!!! BUt hey, let me know ify ou got any more questions im more than happy to help :)
@ЗахарЗахар-г9ж
@ЗахарЗахар-г9ж Ай бұрын
Can you share the INAV settings? I want to build one too
@locarshobbies
@locarshobbies 29 күн бұрын
Hey mate, i followed theFrisco's VTOL guide in this video kzbin.info/www/bejne/g3anm3uaj7-AmqM give his video a look and follow what he says :)
@vavanetsp
@vavanetsp 4 ай бұрын
Beautiful....it flies so smoothly. I built the Hornet too, but I'm a little bit insecure about the inav config. Could you share your config just to check if I missed something? Many thanks.😊
@locarshobbies
@locarshobbies 4 ай бұрын
Will do sorry I just got back on the yt land haha
@Bernard-Wim
@Bernard-Wim 5 ай бұрын
H nice to see te maiden. I made the Hornet too and it is ready for maiden but can't solve the issue of arming.Flightcontroller Matek V-tol. So i like to now how you made de Nav setup. Thx.
@locarshobbies
@locarshobbies 5 ай бұрын
Hey mate check out this video! kzbin.info/www/bejne/g3anm3uaj7-AmqMsi=Nj_TP3H0-ot__eps A great intro to inav vtol setup
@kimsauermilch3655
@kimsauermilch3655 2 ай бұрын
Hello, have you found a solution to the lack of performance on your Titan? I have printed the same model with 1300kv motor 4S and 7 x 5.5 propellers and it can barely keep flying, I have tried with 6S without improvement, kind regards kim
@locarshobbies
@locarshobbies 2 ай бұрын
Hi! So, 1300kv running 7040 3blade on 4s will be a bit lackluster, I have experienced improvement with the use of 6s with the same prop setup in 4s I'm constantly on the top third of the throttle to keep her flying running but on 6s I'm around 50-60%
@patrickhellmuth5982
@patrickhellmuth5982 3 ай бұрын
Hello my friend, do you remember that you wanted to post the diff all file
@locarshobbies
@locarshobbies 3 ай бұрын
I did and I forgoty apologies I'll see if I can get it today
@patrickhellmuth5982
@patrickhellmuth5982 4 ай бұрын
Hello my friend, can you post your diff all for inav?
@locarshobbies
@locarshobbies 4 ай бұрын
I will do it tomorrow I'll do a diff all 👍
@patrickhellmuth5982
@patrickhellmuth5982 4 ай бұрын
@@locarshobbies thank you my friend.👌
@patrickhellmuth5982
@patrickhellmuth5982 4 ай бұрын
Hello my friend, which time you post the diff all?
@patrickhellmuth5982
@patrickhellmuth5982 3 ай бұрын
Hello my friend do you think on the diff all file, please.
@locarshobbies
@locarshobbies 2 ай бұрын
Hi this is so bad by me as I have been so busy however can I refer you to this link he has a diff that I followed and a step by step instruction I will update the video with this link so that propel can see what or how to setup 😊 apologies for not getting teh diff kzbin.info/www/bejne/g3anm3uaj7-AmqMsi=zOgKca04lf_PvRW_
@stevenfollows1205
@stevenfollows1205 5 ай бұрын
Hi, does the motor at the back stop when you transition to forward flight ?
@locarshobbies
@locarshobbies 5 ай бұрын
Yeah mate she definitely stops in fwd flight mode
@panorama1453
@panorama1453 4 ай бұрын
Hello. Can you share config file? Thanks.
@locarshobbies
@locarshobbies 4 ай бұрын
Will do shortly!
@panorama1453
@panorama1453 2 ай бұрын
@@locarshobbies Hello again, is the config file ready? If so, can you send it? :) Thank you in advance.
@jameswhyte3654
@jameswhyte3654 5 ай бұрын
Inverse reverse upside.....thing 😂
@locarshobbies
@locarshobbies 5 ай бұрын
HEY! It's a technical term right!? Ive been informed it's called "Anhedral":
Flying a 3D Printed VTOL UAV | Stallion with GM3 Gimbal
7:53
FLIGHTORY
Рет қаралды 19 М.
Titan Dynamics Cobra RC VTOL
5:35
Hobby Concept
Рет қаралды 18 М.
HELP!!!
00:46
Natan por Aí
Рет қаралды 39 МЛН
Players vs Pitch 🤯
00:26
LE FOOT EN VIDÉO
Рет қаралды 19 МЛН
Titan Dynamics - Viper VTOL / 3D Printed aircraft
11:35
Bobby Moser
Рет қаралды 2,7 М.
ATOMRC DOLPHIN INAV VTOL BUILD - PART 2 INAV SETUP
30:04
Jeff Does This...
Рет қаралды 2,7 М.
Building a V22 Osprey - Part 2
22:12
Tom Stanton
Рет қаралды 3,9 МЛН
Landings, Moments & Crashes @ Warbirds Over Kingsbury
9:30
The RC Jet Jock
Рет қаралды 10 М.
3D printed Eclipson FOX - Build guide aerobatic sailplane
8:42
Eclipson Airplanes
Рет қаралды 22 М.
Titan Dynamics 3D Printed Hornet R/C VTOL Aircraft
5:39
Hobby Concept
Рет қаралды 6 М.