Can it be repaired Astra H Z16XEP twinport manifold Part 3

  Рет қаралды 12,490

VauxRez

VauxRez

Күн бұрын

In this episode we complete assembly of the Astra lower inlet manifold, refit it to the car and find out if it was the cause of our rattle
MUSIC CREDITS
Intro/Outro Track
Syn Cole - Feel Good [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Syn Cole - Feel Good |...
Free Download / ncs.io/feelgood
Background track
Axol x Alex Skrindo - You [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Axol x Alex Skrindo - ...
Free Download: ncs.io/axolyou

Пікірлер: 7
@frisco-2.0
@frisco-2.0 3 жыл бұрын
This knocking rattel comes from a lose tin plate inside of the intake manifold. You can test it by taking of the throttle body and tapping on the tin plate inside of it.
@VauxrezNeil
@VauxrezNeil 3 жыл бұрын
This is what I thought originally, you will see I have done a series of videos on how I stripped and re sealed the manifold, however it turns out to be a lot more serious than this as you will see in later videos :)
@danielbachenek7758
@danielbachenek7758 4 жыл бұрын
problem removed? Where did you buy such sleeves? what is the principle of twinport operation? Is it operating at idle speed? What pulls the flap tendon? Bosch valve or potentiometer?I'm from Poland sorry for the lack of correctness in writing, writes via a translator.
@VauxrezNeil
@VauxrezNeil 4 жыл бұрын
Hi Danial I didn't replace the sleeves just the actuator bearings which I bought off eBay, other than the actuator valve and position sensors, you can't buy spare for these manifolds, just the complete unit which is expensive. As I understand it, the twinport system closes one of the inlet ports off at low engine speeds to increase vacuum swirl which in turn increases low end torque and improves fuel economy, the position of the flaps is operated by vacuum from the engine which is controlled by the ECU via a solenoid valve and position sensor feedback loop
@alisinan4148
@alisinan4148 2 жыл бұрын
hello ıs position adjustment done after repairing?
@alien-bl6yd
@alien-bl6yd 3 жыл бұрын
Hi what was that I mean knockin I have the same problem in 1.6 Xep Tnks
@VauxrezNeil
@VauxrezNeil 3 жыл бұрын
A common problem is the baffles in the intake manifold but in my case it was something more serious, keep watching ;)
We list the weaknesses and important features of the Opel Z16XEP engine. Subtitles!
17:18
Can it be repaired Astra H Z16XEP twinport manifold Part 1
31:06
HAH Chaos in the Bathroom 🚽✨ Smart Tools for the Throne 😜
00:49
123 GO! Kevin
Рет қаралды 13 МЛН
Expected Ending?
00:45
ISSEI / いっせい
Рет қаралды 4,4 МЛН
Win This Dodgeball Game or DIE…
00:36
Alan Chikin Chow
Рет қаралды 13 МЛН
Je peux le faire
00:13
Daniil le Russe
Рет қаралды 22 МЛН
Astra H Z16XEP Lower Intake Manifold removal
15:40
VauxRez
Рет қаралды 40 М.
Astra Z16XEP manifold repair part 3
23:29
VauxRez
Рет қаралды 7 М.
ASTRA GSI ENGINE REMOVAL
4:47
DEC-SPEC
Рет қаралды 1,9 М.
AGR-Ventil beim Opel Astra H wechseln mit dem 1.6 Benzin Motor Z16XEP
15:12
I know why the Astra is rattling FINALLY!
13:35
VauxRez
Рет қаралды 96 М.
ремонт впускного коллектора и твинпорт Опель мерива а, z16xep.
23:00
Ремонт автомобиля своими руками
Рет қаралды 2,4 М.
Vauxhall/Opel Astra 1.6 running poorly and no power... Problem found!
42:01
Astra Z16XEP manifold repair part 1
25:18
VauxRez
Рет қаралды 14 М.
HAH Chaos in the Bathroom 🚽✨ Smart Tools for the Throne 😜
00:49
123 GO! Kevin
Рет қаралды 13 МЛН