Can it Take a K26? - Episode 123

Patreon for MakerSpace:
/ captainxaviernerf
Instagram:
CaptainXavierNerf
Reviews requests:
[e-mail]
General Questions:
[e-mail]
Facebook Page:
CaptainXavier
Mailing Address:
Chaylo Laurino
P.O. Box 148
Vader, Wa 98593
Theme song source: archive.org/de...
Alterations: spliced.
Time Lapse:
BenSound

[@NerfAutist]

Episode 123? Yet still the most entertaining modding related show I’ve ever watched

[@dragonblaster-vu8wz]

With those 3d printed shells and Mega XL, I wonder if a shell with a post the dart sits on instead of a barrel it goes in would work better

[@CaptainXavier]

A post was my later thought too. Much less dead space.

[@ionobru]

@@CaptainXavieryou need to re-order the playlist again 😢

[@steelryder2266]

Even after all this time, I still enjoy the “word from our sponsor” bit

[@masterSageHarpuia]

I would love to see an update on the m32

[@dianeo4092]

pls

[@chrisr6776]

Yes please. Thanks

[@gairkarohncatarn4527]

Thank you for attempting this on so many blasters, even if they can't take a K26 these are quite informative on the internals of each blaster you cover. Thanks for making the series.

[@alexandermacphearson4379]

The M203 will make an amazing masterkey

[@jeffreycarman2185]

9:53 in addition to reversing the flare whoever designs the Mega XL shell could also minimize the dead space and optimize it for front loading the Mega XL darts.

[@drkstl]

The megaXL shell has like 2mm of dead space in it. There is nothing to minimize (I'm the one who designed and printed those shells)

[@gairkarohncatarn4527]

It might just be a poor seal on the shell by the blaster

[@drkstl]

@@gairkarohncatarn4527 in the m32, definitely The issue with the MegaXL rounds is that the MegaXL dart itself isn't consistently produced. Even within a pack you'll have diameter differences. If you massage the dart in your hand a bit before the first few fires, it'll resolve the issue.

[@TalonaxeArmory]

Regarding the MXL Shell, the issue is MXL and the total lack of consistency with the Ammo Type, every batch of them is a little different you can get them to work but it takes some... massaging.

[@CaptainXavier]

Right!? Dial that QA in already!

[@TalonaxeArmory]

@@CaptainXavier It's unreal... I have... Hundreds of rounds of it that I bought because it looks like they're never going to make it again and it feels like every single batch is different. Also, the m32 looks like it will take K24 which we have on hand from the shoulder fired launcher, I'll let you know once I open mine up since it's finally here

[@BadgerFiresFoam]

@@TalonaxeArmory its really cool to see you mentioned in capt. x's channel! i look forward to meeting capt. x in april once again (hopefully this time more formally.) will i be seeing you there?

[@TalonaxeArmory]

@@BadgerFiresFoam if I go to an event that weekend, it will be Boilerdome

[@BadgerFiresFoam]

@@TalonaxeArmory what a bummer that they had to schedule on the same weekend.

[@lemonfriend4175]

Hi Cap! it seems like forever since ive watched your stuff, i have really missed your perfect blend of serious and silly, keep up the amazing work!, also im so glad that since the last time ive watched i got into design and 3d printing thanks to you!

[@williamcrosslin6969]

i love seeing my family crest in your videos

[@Smartass-pl3nx]

Nice, I love this series!

[@bigemugamer]

4:37 AI nano bug infiltrates the K29 modding base.=D Great blasters, heard of them once but nothing else. great video. =)

[@nicholasmazzarella2720]

Captian Awesome video. These look amazing. Keep up the great work.

[@OGclasshole]

That M203 would make a really good masterkey, i just cant find it!

[@jeffreycarman2185]

Love the new intro! Bangarang!

[@Lykrast]

I'm curious where do you even get those blasters? Couldn't find the M203 online (except mentionned on 3d printed shells)

[@CaptainXavier]

I got it on Temu...I think...

[@spilledfries]

@@CaptainXaviertemu was the only place i could find it on

[@Ljplaysplanes]

I want to see someone make a nerf gun with a spring from a PIAT launcher or something comparable.

[@stuntmatt7124]

Those things sure look cool.

[@skelepus2171]

YAY another k26 video

[@maverickbeagle817]

Man is the M203 even on the market anymore/yet? I’ve been searching for it since this released but I can’t find anything at all, it’s like it doesn’t even exist😅

[@CaptainXavier]

Yeah, I can't find it either...and I have one. Pretty sure I got it thru Temu so who knows if they are still available.

[@flame1245]

Not the company that makes these(I don’t think) but there’s a m79 howitzer that takes the same kind of shells that I like to see your opinion on I like cause I own

[@BenthewildchildE750]

Sir, I am sorry to say this question again, I have decided to continue building my gear and I’m starting with reassembling my mediator, is there a specific spot for the different types of screws for the shell and what orientation does the plunger rod need to be in to catch smoothly?

[@CaptainXavier]

Yes and yes.

[@BenthewildchildE750]

@@CaptainXavier is this the captain Xavier snark I’ve heard of? If not, sorry for assuming.

[@BenthewildchildE750]

@@CaptainXavier sorry if I came off as rude in my response that was not my intent. Would you like me to send you an email with pictures or am I to figure it out on my own?

[@CaptainXavier]

@BenthewildchildE750 wait, I misread the second question. The answer the first is just "yes." The various screws all do go in specific places. I do not know which screws go where off the top of my head. As for plunger rod orientation. If it matters, then there should only be one way to fit. If it can fit in more than one way, it probably doesn't matter.

[@BenthewildchildE750]

@@CaptainXavier thank you for the explanation and clarification, I never meant to imply anything negative about your response, thanks for the information, I look forward to your new videos and bagerang! I think I miss spelt that. 😂

[@gargunkle]

I don't recall if I said this before, but I

[@comandergold93]

You should make a whole Nother spring post for the M 32

[@fourthousandhammers3493]

Hey, I can't seem to find these online. Does anyone know where to buy these?

[@CaptainXavier]

The M32 I got from Biu-Blaster.com. The M203 I got from Temu.com

[@pjusttheletterpreally.noth2995]

Oh hey, looks like you managed to get a K26 into that Rapidstrike? Congrats. Jokes aside, which blaster is the one in the new opening? Looks sweet

[@CaptainXavier]

That is an FDL-3

[@pjusttheletterpreally.noth2995]

@@CaptainXavier Neato. Good luck getting the K26 into it

[@prime-eight]

Been waiting for something more like the side swivel M320 but in an underbarrel variant in 40max/megaXL. Like a M320/pico booper type thing or like a calamari/booper. The pico booper is way to flimsy and unrefined

[@reconab12]

Where is the best place to get these blasters?

[@DartArmoury]

We sell them at Dart Armoury - shipped from the UK and have featured our products with Cpt Xavier before 👍

[@reconab12]

@@DartArmoury do you guys sell the M 203 or is that a different company?

[@moejitz]

Where is the link to get the smaller one? It would make the perfect masterkey. Finally a 203 masterkey!!

[@CaptainXavier]

Check to comments. There was someone who had a source. I got mine on Temu but that is a sketchy source.

[@moejitz]

Thank@@CaptainXavier I got mine and I attempted to upgrade it with all types of springs can you give me some info on the one used? Oh and where did you get the printed shells from again?

[@natestormer6118]

The cake was a lie(portal reference)

[@runnerdm6]

Could you look at the adventure force ranger?

[@TintagelEmrys]

What did the K17 get you? And can you double up with the K17?

[@Mgtowhonesty]

does there happen to be links to these blasters avilable? i know the multi grenade launcher is on zhenduo, not sure about the howitzer.

[@CaptainXavier]

I got the M203 from Temu and the M32 from Biu-blasters.

[@pjusttheletterpreally.noth2995]

​@@CaptainXavier Temu is safe? Last time I bought something from there, I got a scam call about my credit card.

[@CaptainXavier]

Who said anything about safe? I just said that is where I got it...

[@Mgtowhonesty]

@@CaptainXavier ummm, no worries captain but i never made a comment about it being safe, i actually hadn't replied to the comment yet at all but i appreciate the information

[@pjusttheletterpreally.noth2995]

@jimmusthegrimmace It was me. I asked if Temu is safe because last time I used it, I got a scam call about my credit card

[@AwkwardPenguin82]

Next, on a Very Special Episode of "Can It Take A K26"...

[@Crowe0920]

If anyone can find a link for the M203 that ISNT on Temu (had a bad experience on there and got a card stolen) please let me know

[@Seawolf.Gaming]

I'm early again. Also I missed me some Can it take K26

[@nerdtvch5]

I underslung my m203, I like the recon/retaliator barrel personally. I used some k17, fires megaXL in those talonaxe shells suitable enough. I've been waiting for someone to open up the m32 because of that grip tbh, I didn't want to F mine up, they're a little on the expensive side and I was lucky to find mine on sale...... ITS ONE SCREW UNDER THE COVER?!?!?! OMG LMAOOOO

[@CaptainXavier]

Well, technically, it is a bolt. There is a nut in the sell. But yes, just the one.

[@nerdtvch5]

@@CaptainXavier thank you Captain 🫡🥳 I was super worried about ruining the handle to get it off

[@MrFreefonix420]

​@nerdtvch5 where did you get it on sale, I litterally dont own any of these grenade launchers because they are cheap dollar store quality but cost the same as a pro nerf

[@nerdtvch5]

@@MrFreefonix420 I wouldn't say they cost the same as pro nerf, they're in line with out brand new off the shelf blasters of similar size and performance. The m32 (six shot) is like 100 bucks, plus or minus 10 dollars plus shipping. I got mine on this past Black Friday sale. It's super realistic looking tho so mine needs a paint job. The m203 I have set up as an undersling attachment. It's like 30-40 bucks and is ok, it's big compared to magnus masterkeys in some sense. Even upgraded with a k17 It's just ok. It works better then the little rocket platform, mega xl is super woorly birdie there, and out of this it fires more true. I actually think the GL-6 Howitzer you can get on Amazon for around 30-40 dollars is objectively the best out of the 3. I'm pretty sure they're all made in the same place, and you can get them at Biu Blasters. My best advice is to shop around with these type of 3rd party options. Most of them have a constant 10% off sale discount code.

[@THEBEAN6412]

The new intro caught me a bit off, I thought I clicked the wrong video

[@Eulemunin]

Notion Informative

[@wanderingbear9800]

any 40max plans or ideas?

[@CaptainXavier]

Yes, but as that was not within the scope of this video, I did not address it here. I will address it when I do my mod videos on these blasters.

[@JB77772]

hi

[@milosmods]

Why don't you just HPA the damn thing and be done with it that's what I did to those things that I got I got the exact same blasters I mean seriously the modification only takes about 10 seconds and you'll be able to run 40 max shells

[@CaptainXavier]

Because this series is called "Can it take a K26?" Not "Why don't I just completely replace the internals with an obviously superior system that is not allowed at most events, thus making it completely unusable?" That being said...that sounds awesome! How does it fire regular shells and 40 max shells!? What core are you using?

[@moomersshupakarri]

Can the letter E take a K26?

[@CaptainXavier]

Yes

[@pjusttheletterpreally.noth2995]

​@CaptainXavier Huh, neat. I tried the letter Q once, and apparently, it's reverse plunger.

[@CaptainXavier]

@@pjusttheletterpreally.noth2995 ...giggity?