Can it Take a K26? - Episode 61

Out-of-Darts is now sponsoring "Can it Take a K26?"! Link below!
www.etsy.com/s...
Email Address: (Not currently accepting commissions)
[e-mail]
Facebook Page:
CaptainXavier
Mailing Address:
Chaylo Laurino
P.O. Box 111515
Tacoma, Wa 98411
Theme song source: archive.org/de...
Alterations: spliced.
Time Lapse Music
"Subaqueous"
by Simun Mathewson
licensed under a Attribution License.

[@oliverlp9719]

During your goodwill runs hit ross. They have cheaper mint blasters and every now and then you find a masterpiece

[@papagoose8349]

Go to dollar tree the ninja blowgun uses old school sized darts. The blowgun is useless but 5 darts for a dollar

[@totophi]

20 cents per dart is too much! Aim for 7!

[@papagoose8349]

totophi 20 cents for 1 dart or do without where else can you get an old school sized dart answer nowhere

[@somerandomladontheinternet533]

Actually the holes in the darts are to small to the point where it's non existent

[@Kodaiva]

Or like 100 darts for ten bucks

[@qwertyasdf66]

6:45 One of those reverse plungers that actually doesn't have any more dead space than if they were the forward plunger equivalent. 9:16 The term for a gun that shoots multiple separate barrels simultaneously is actually 'volley' rather than 'shotgun'. I learnt that from a recent Forgotten Weapons episode.

[@CaptainXavier]

Ooooh, good to know! Thanks! I will start using that term!

[@stevemelnick6779]

i LOVE these old blaster tagbacks/k26 videos. i grew up with cyber strike, max force, etc. era of nerf. its a walk down memory lane lol

[@jimthecat2056]

I used to love this channel back in the day, glad to see it's still up and running

[@CaptainXavier]

Back in the day? My channel is only 3 years old...

[@jimthecat2056]

@@CaptainXavier as in when I was little

[@jimthecat2056]

@@CaptainXavier so around that time

[@homelee665]

Hey, a sponsor! Good guy Darts! 73 seems like an unusual number, but it should be plenty. Congratulations, sir!

[@geekmonkey895]

Was awesome seeing you in Dallas. Looking forward to the video you have planned for the gift you got.

[@ethanL337]

Buzz Bee suction cup darts will definitely work in that Warthog. I find that those darts tend to work with most vintage Nerf blasters that have the old school barrel post style holder.

[@EDSKaR]

That warthog has an interesting design. The main flaw with indirect plunger is the massive amount of deadspace but with using a spigot rather than a barrel, they have greatly improved the air efficiency of the system so it's actually pretty good in terms of air delivery. The spring is pathetic though. On the plus side, you have another sear catch spring.

[@LightningEagle14]

I’ve heard you can substitute darts found at dollar tree for old school megas. Side note, that warthog has one sexy shell....

[@kodenarmstrong3114]

I freaking love the k26 episodes!

[@Eyckzim]

So cool! The Rattler is one of the most nostalgic blasters from my childhood. I got to get my hands on one!!

[@jnelly814]

I had the Warthog in 1996 when I was 15. It was my first nerf blaster and we could never afford the big ones, which probably explains my affinity for the pistol nerf guns.

[@camillecirrus3977]

no matter what video im watching, Can it Take a K26? is something that gets the highest priority

[@spiderking5633]

I love this section of the channel

[@zeroblade6599]

That rattler is funky, with a bunch of extra barrel thingies for rapid reloads you could run it in a war

[@TheCatpirate]

Zero Blade Good luck amassing them.

[@adt501]

Finally some blasters I owned as a kid! I remember having another one from this line that could fire from the barrel, and had another blaster built into the grip so you could fire darts from the bottom of the grip too, I cant remember what its called

[@CaptainXavier]

Not sure about the first one but the second one was the Secret Shot

[@sir_goofs9456]

Tbh I thought the rattler was just going to snap and blow up

[@CaptainXavier]

Me too

[@drewster2220]

Treecko_Gamer02 me too

[@Shyid]

This reminds me of ~15 years ago when I pulled apart my rattler to see what i could do with it, decided it was garbage, went to bed and never re-assembled it.

[@eggbag4182]

The Warthog's plunger rods and tubes together look like a tube of epoxy to me.

[@CaptainXavier]

They do indeed.

[@maddoxmcpherson3731]

You can use the old school buzz bee sticky darts in old vintage blasters became the inside is wider then a nerd dart

[@lex2746]

So this is why Out of Darts has been out of stock of K26.

[@vulpix9210]

73, thats so overkill LMAO

[@MelodyBurst]

I saw a mint-conditions Rattler at a thrift store! I went to buy it and... they wouldn't sell it to me because there was no price marked. And the manager got really mad at me. I still miss it...

[@coltstelting6969]

You use get a bunch of rattler barrels so you can swap them out like mags.☺

[@RealmofShadows88]

I noticed when you were looking for a spring for the warthog pistol blaster, there was a spring in your spring bin with a label that said Mega Centurion main spring. I thought those were sealed in a solvent welded plunger tube.

[@CaptainXavier]

Indeed...but you see I have a tool called a "saw." It allows you to separate things that do not wish to be separated...

[@Comet-lv3nk]

@@CaptainXavier lol

[@acelive9644]

Awesome

[@TheFroperator]

2 is the best prime number It's the only even prime number Hence why I love it

[@osielcardenas2869]

Cool, I had a blast at Jared's epic Nerf battle 3!

[@CaptainXavier]

Me too!

[@osielcardenas2869]

Captain Xavier thanks for fighting alongside me in foam flinging warfare.👍

[@yvngsudan2673]

Hi Captain great video

[@TheRealDrae]

I think he never really found a blaster that can ACTUALLY take a k26. You should rename it to 'can it take a piece of k26'.

[@taylorhairrs1310]

Would the Warthog's plunger tube fit a retaliator spring, or would it be too big.

[@nicholasgreen2989]

You are the best KZbinr you make my day every vidio

[@NikoAtHeart]

76 comments, 99 likes, 1 dislike, no views KZbin, ya gotta fix your system, And you’re drunk.

[@pixel_arc8550]

Here we are, two years later, guess what still does not work. Well done, KZbin.

[@brianriddle8389]

RIP Stephen Hawking

[@JoelHomieShow]

Yes

[@dfkman]

So does the Warthog have a reverse direct plunger? That design is baffling to me.

[@CaptainXavier]

No. It is just a reverse plunger. But the design is baffling.

[@Comet-lv3nk]

Reverse dir....... Wha

[@Bean41]

If I’m not mistaken old mega blasters will not mind new megas. Maybe slightly less range but you can test fire them anyway.

[@CaptainXavier]

They will not fit in most. They are too big.

[@Bean41]

Captain Xavier oh. I know the work in the manta ray. Walcom did a tag back and that’s where I got that idea I guess.

[@CaptainXavier]

Yeah, there were basically NO dart size standards in the pre-Hasbro years.

[@Bean41]

Captain Xavier mmm I’m not old enough to know that.

[@pigfish99]

I didn't even know the wartog was a Reverse plunger!

[@kerfefe7202]

Loved the vid

[@kyles.8225]

Good boi OutOfDarts sending the mega overkill

[@drewster2220]

Captain Xavier do the deploy!!!!

[@CaptainXavier]

I already have...

[@lukekozak1403]

Good morning/noon/afternoon/evening/night! Also you should make merchandise because i would definitely buy it

[@Bean41]

Knight Of The Free World totally!!!

[@CaptainXavier]

Soon...two sources will hopefully soon be offering X-Strike Merch...

[@lukekozak1403]

Captain Xavier how about some merch with you in your full tac gear with Teir (sorry if i spelt that wrong) and some ier merch

[@captainnapalm8207]

Awesome. Just plain Awesome.

[@Schmidtlle_d]

You could use the rattler as a wrist mounted nerf gun that would be pretty boss like

[@treydesautels8247]

You should put the shell around a jolt or somthing

[@UnforgetableLuncheon]

You don't have to use old megas, for most blasters you can use the new mega a sometimes they get better ranges

[@CaptainXavier]

I tried, they do not fit.

[@donavonpetersen8386]

If you are able, you should try and make a modular Rattler

[@pauldyer6620]

Use buzzbee sticky darts for the warthog

[@sepronindlvarn486]

Sooo... I started making a Sentry turret base for Tier... It's remot controlled, and I plan to figure out an automated version using the Thermal Hunter scope and the Lego MindStorm color sensor.

[@sepronindlvarn486]

For tomorrow/next week's QnA

[@CaptainXavier]

...is there a question in there?

[@sepronindlvarn486]

Captain Xavier Just wanted your opinion.

[@CaptainXavier]

Well ask for it on tue previous q&a video. That is where I draw questions from.

[@TRASHEDTEG]

Nothing like watching "can it take a k26" while modding

[@ryancollins9511]

Could you please do a build guide on a powerstock Recon/Raider?

[@stephenross5586]

This really helps with what happened to me today

[@CaptainXavier]

Oh? What happened?

[@stephenross5586]

I was forced to change my little sister who is a 12 year old with down syndrome, and I cannot handle human poop, I literally instantly projectile vomit whenever I see or smell it

[@CaptainXavier]

Well...that is just unpleasant...

[@stephenross5586]

Captain Xavier it was, I cannot even stand from how much my guts are retracting from it

[@blackrat9177]

Ross Parker I know the feeling I work with special needs children and one of the boys is down syndrome and he sometimes has accidents and I often help him with clearing him uo

[@jedileader0174]

The Slingfire has a lock to prevent you from primming the blaster when the jam door is open, right?

[@alaeriia01]

Jedileader 01 Nope.

[@neonman54]

Neat

[@mannythepotato8931]

Literally no one talks about how in the into he is trying to put a spring in a rapid strike

[@CaptainXavier]

It has LITERALLY been talked about in the comments of every episode since I changed the intro...

[@qwertyasdf66]

What is there to say? It's a simple and funny gag and that's about it.

[@gamerguy425]

perhaps just to round it up, may I recommend you make a "best K26 candidates vid"?

[@TheMindRobber42]

Is anyone keeping score? How many could take k26? How many could take spring upgrades? How many couldn't be upgraded?

[@CaptainXavier]

Someone out there is. I met them at JENB3, they said they have a spreadsheet with the results.

[@TheMindRobber42]

Captain Xavier Amazing. Hopefully they see this and post their results

[@hexbladescurse]

Captain Xavier I think u should turn the rattler into a wrist mounted shotgun or attempt to masterkey it. Any thoughts

[@loosemoose4134]

No Chain Blazer? Drats.

[@Bean41]

Elliott Larsen I think he’s done it before. May be mistaken.

[@loosemoose4134]

Bean 41 He’s done the “RotoTrack”. I delivered that “Chain Blazer” to his vintage bin personally.

[@CaptainXavier]

I'll get to it. I plan to do it along with another similar blaster later.

[@loosemoose4134]

Captain Xavier Ah, I see. Well, you’re still a schmuck.

[@Spaceraptorderp]

Cappn does it again

[@captainnapalm8207]

Have you seen the warthog-doublestrike?

[@Wchapel88]

A request for a future k26 episode, for The Nerf N-Strike Mega HotShock. Great video, as always Captain

[@Bean41]

DarkenKnights he’s done it. And a dozen other vids.

[@CaptainXavier]

Again? I mean...I could just start reusing blasters I have already done...but I suspect most people would complain about that...

[@Wchapel88]

Must have missed it and or over looked it in my search. Thank you both for the responce

[@CaptainXavier]

If you search the name of the blaster and k26 it should always be the first result IF I have done it. I made sure to always have the blaster name and k26 in the tags. :D

[@Wchapel88]

KZbin searches not what they used to be lol I'll keep on the look out next time, I watched your video on your grappling hook dart retriever and thought the Hotshock would make a good K26 Grapple Gun using The Batman Grappling Hook with a mega dart. Thanks again for your help

[@michaelking8483]

hallo captain have you ever tried making your own springs

[@CaptainXavier]

No. I don't have the tools to temper spring steel.

[@matteomiller1057]

Captain Xavier my regulator isn't working I got it one target for sale the first time I returned it because it shaved the top of the darts then I went back and got another one and now the fly wheels are super slow that I can't shoot it and the conveyor belt isn't working what should I do

[@erasus0307]

How about the x shot regenerator

[@siviblakhawk]

Man, what FPS did that Rattle hit With a brass barrel?

[@smittzero8463]

I haven't seen much about the X-Shot Regenerator on the internet. I wonder if that can take a k26... Also, are its clips cross-compatible with the Battlescout's?

[@CaptainXavier]

If I ever get one we will find out. But I can tell you now the clips are not cross compatible.

[@shadowsa2b]

have you ever tried the vulcan? electric springer...

[@CaptainXavier]

Yes

[@kittenclaws5775]

Frequency is coils per/inch so more coils is higher frequency :) Did you ever do that weird alligator shaped blaster for K26? Because if you haven't I have one I thrifted for two bucks and I'd send it to you for an episode if you wanted! I'd -like- it back but that's not actually conditional since I just grabbed it out of nostalgia xD

[@CaptainXavier]

I have not. I plan to borrow one from the nerf currator.

[@kittenclaws5775]

I mean, want to use this one instead? I actually would feel bad if the Curator's broke D: I don't care about this one beyond the fact I got to find it xD

[@mattvonnerf3495]

I don't think 73 is a happy prime number, 79 is the 6th happy prime and below that, the 5th happy prime is 31? Correct me if I'm wrong, math geeks!

[@CaptainXavier]

You are correct. I did the calculation wrong in my head. I added the digits instead of the square of the digits.

[@MrMikeyt65]

You could try a double strike spring

[@CaptainXavier]

WAY to short.

[@MrMikeyt65]

Oh Ok

[@JoelHomieShow]

Frost like

[@m.otoole7501]

Hey Cap. I obtained a Stampede ECS, but the internals were shot to hell. I stripped the original internals out and am wondering if I can fit a Stryfe flywheel cage and wire it up inside the Stampede shell somehow. If not what the hell do I do with a dead Stampede shell?

[@CaptainXavier]

With enough epoxy, anything is possible

[@m.otoole7501]

I am completely unexperienced with wiring etc however. So that poses problems. (I'm a springer guy by default)

[@diegoblattler7391]

I’m new to lipos and want to get into them but how does one properly take care of a lipo

[@adrianmarshall5851]

Diego Blattler there are probably better people to ask than Captain X. Not a slam against him or anything but as far as I know he's still relatively new to then himself

[@josephward6454]

i looked up the warthog blaster an it will fire whistler darts if u have any

[@CaptainXavier]

I do! Thanks for the tip!

[@josephward6454]

Welcome Captain'. have fun,

[@josephward6454]

I also forgot, my nerf blaster turned out awesome, i will send pics when its dry

[@therichiephetpriyavanh5980]

It is k26

[@adamalvarez4528]

Ok it’s a k26 spring does that mean it’s 26kg in strength ? If not what is it?

[@CaptainXavier]

No, the term k26 comes from the serial number on the manufacturers website. The spring rate is 3.88lbs/in

[@anglemendoza9283]

Que honda

[@adamring2104]

73 isn't a happy prime....

[@CaptainXavier]

I know, I miscalculated in my head. I added the digits instead of the squares of the digits.

[@mementosmemes5622]

I like turtles 🐢

[@TheRamblerMan]

The old Buzzbee stickies should work perfectly. They're the closest thing to the old school Nerf micros that are easily obtainable. I'm curious what happened to the old school megas I sent you. Did they get passed on to another Nerfer?

[@CaptainXavier]

I have them...they did not work in the Rattler...no idea why.

[@TheRamblerMan]

Captain Xavier Oh cool... and weird. Maybe age has shrunk them and they don't work as well in some of the old blasters. They seemed to work fine in the eagle eye but who knows. The barrel "apparatus" on the rattler is kind of weird after all.

[@CaptainXavier]

Indeed and there were no standards back then what with all the company switches.

[@TheRamblerMan]

Captain Xavier Ah true, very true.

[@infinite3365]

But can a jolt take a k26?

[@CaptainXavier]

No

[@leepiirainen2761]

I humbly request a ds-12 and ds-6 "can it take a k26". I did a ds-6 myself, and i need a little video help haha

[@CaptainXavier]

Yeah, they are on the list

[@RoseBianothername]

You should signale the ratler

[@jaydengonzalez145]

Hi

[@soulja7655]

Prime means its only factors are 1 and itself

[@CaptainXavier]

...I am aware...why are you bringing this up?

[@soulja7655]

For the retards out there

[@soulja7655]

Also for the sling fire mod where can i get the berral

[@soulja7655]

Wana do the mod too

[@soulja7655]

I wana build this

[@jonny8796]

Do the rads 12

[@orcatwar9810]

hello

[@vincentmalpica]

Are you gonna do another thrifting videos?

[@isaactachiki-urias4747]

If I want to put IMRs in my stryfe or rayvenfire do I have to take out the thermoster

[@CrimsonHoodnerfer]

Isaac Tachiki-Urias not necessarily you could take it out or you can bypass it by twisting the yellow omega. If you want more info go check out my stryfe mod guide. The mod guide also works for the rayven.

[@CaptainXavier]

Only if you replace the motors.

[@CrimsonHoodnerfer]

Captain Xavier are barricade motors similar to 130 motors.

[@cynthiablackthorn]

What about the Nerf battle scout

[@CaptainXavier]

What about it? I have already done it.

[@adamconley4793]

Did you do a recon cs-6

[@CaptainXavier]

yes

[@chatotalks5325]

one moment, kzbin.info/www/bejne/ZpWtiIKipJebiqs

[@zeroblade6599]

Episode 12

[@adamconley4793]

Zero Blade thanks

[@chatotalks5325]

from what I researched 73 is not a happy number, sorry capt'n

[@CaptainXavier]

Damn...you are correct! I forgot that it is the sum of the square of the digits, not just the sum of the digits...

[@kelzfelder5354]

Can u do a k26 on a nerf dog? Will it make a difference?

[@CaptainXavier]

A nerf dog? ...what?

[@kelzfelder5354]

@@CaptainXavier nerfdog tennis ball launcher

[@CaptainXavier]

...it is rubberband powered. Not spring powered.

[@kelzfelder5354]

@@CaptainXavier good to know thank u

[@garretthershman5582]

can a potato cannon take a k26

[@CaptainXavier]

Yes

[@burningdegree503]

Can the camera take a k26?

[@CaptainXavier]

Yes

[@burningdegree503]

Wow that must be one strong camera

[@wesleysneller8653]

Do you have an Instagram account

[@CaptainXavier]

Yep

[@TheCatpirate]

Can it take a K26 is now sponsored by Catpirate too. :P

[@TheCatpirate]

Where can I get K26?

[@moshehyeazus5223]

I know this show was very successful but you are running out of guns to try. It's time to end the show

[@williamsveen2827]

minimum men naw. Thats the great thing. They make new models every year.