Can the new JRL ONYX replace the S/C INSTINCTS | REVIEW, UNBOXING , & COMPARISON

Watch My Step-by-Step Self-Cut Tutorial HERE: • 🔥INSANE🔥 Self Cut TRAN...
Embracing your uniqueness is crucial in a world that often values conformity. Our differences are the wellspring of creativity, innovation, and progress. When we dare to be different, we challenge the status quo, pushing boundaries and fostering diversity of thought. It is through these distinctions that we unearth new solutions to age-old problems and weave the rich tapestry of human experience. Being different empowers us to break free from the shackles of societal expectations, to authentically express ourselves, and to inspire others to do the same. In a society that thrives on individuality, embracing what sets us apart is not just important - it's essential for personal growth and the advancement of our collective human journey. SO BE DIFFERENT! ❤️

[@thecloudedbarber]

Check your zero gap on the jrl and also you can adjust the metal on the guards to reduce vibrating guards

[@smittylamar]

Just subscribed fam💪🏾🤜🏾🤛🏾🏆 Ima get the Jrl Ghost 👻when they drop

[@emmanuelhayden2449]

Stay consistent bro your time coming! I went with the onyx instead of the Instinct, way too loud and vibrates way too much.

[@KriispyKing]

Thank you Brotha 🙏🏾❤️ Great choice! Haven’t used my instincts much since i got the Onyx ! Much smoother ride 💪🏽

[@SmittyBlendz]

Can’t wait to get my hand on these. Ordered a couple weeks ago.

[@KriispyKing]

Excited for you brotha !

[@Kdiazox]

Dope video bro, really enjoyed the comparisons. I haven’t been able to put them down since I got them. I have no guard rattles with mine I would say use a new guard. Every blade and clipper is slightly different and stretches that metal bracket. You probably figured it out by now. I also had to back them off a couple hairs so it wouldn’t touch the guard which was also causing a small rattle since they were set too close.

[@asniffer6532]

Mine arrived today, the box is cool however I think they could have added a silk bag to put all the guards or something. It feels like something is missing with such high quality product. Design wise, I think JRL Onyx are by far the most classy of all clippers. They are not flashy like Babyliss products, but that shade of black from the Onyx model is amazing.

[@713johnblendz]

I had some what same issue with my wahl clipper I opened it and the wire to my power switch was a little disconnected so I fixed it and it works again

[@massterrbarber]

Nice video and great introduction. I have my go to it’s the XTRIM clippers and I’m thinking about getting the onyx jrl I see potential for them being in my arsenal.

[@KriispyKing]

Preciate the love my boy !! Never heard of the XTRIM, gotta look into them. The ONYX will not disappoint !

[@edwardramirez1420]

Thx for the support!

[@vladankostevski5749]

Hello, which one is better? I love JRL 😊

[@mauriceporter2394]

I’ve had my JRL for years with no issues.. I’m liking the all black

[@KriispyKing]

The new all black look is 🔥🔥🔥

[@desmondmitchell5602]

I love my instincts i had the 1st ones that came out. They fell apart in 2 weeks. My 2nd pair they sent me they brought down the rpms on the new version so it never gets hot anymore.. awesome move on there part !!! I put the gold see though lens on the black case it's a beautiful clipper now !!!

[@KriispyKing]

I bet that looks 🔥🔥 no issues with my current Instincts. Been running strong for 5 months. So hopefully they hold up.

[@desmondmitchell5602]

@@KriispyKing it does.. that's awesome to hear

[@durtyboyzinc]

Try the JRL blade on the Instinct! Works great!!!!!! I promise you!!!!!!

[@terrell3993]

JRLS over everything, Wahl Seniors as a back up..32 yrs in.

[@eddieworkman5855]

wahl seniors are rubbish not good for fading atall

[@terrell3993]

I dont know you or your skill level, but that statement is absolutely not true. I've been blazing heads with the Wahl Seniors.

[@eddieworkman5855]

@@terrell3993 they were good for bulk but not fading if i had choose a wahl clipper for fading would be the magic clip

[@valetudo025]

@@eddieworkman5855that’s Cap bro. Seniors are good for bulk and fading.

[@et8865]

What guards go on the jrls?

[@paulcollins6395]

Who does your hair!! Please a tutorial on your cut!! It’s fire!! Also authentic and very needed review!!

[@KriispyKing]

I cut my own hair lol. But in The video i literally just gave myself a line up before I recorded.

[@trimmerjon07]

I got 2 S/C clippers. I gotta go with the power and maneuver. I was told you can put the fade blade Wahl on those. But I haven't tried it

[@jt2475]

You can put the wahl fade blade on the onyx?

[@davidberry9226]

Is the throw on the JRL's a half? Or a 1?

[@rfresh445]

Ima get 2 of em cause I really enjoy the taper blade for coarse hair and for fading I like the fade blade quick and out

[@thebarberexperience5846]

I feel in love with jrl when they first came out them instinct is something i have never seen in a clipper that size and power if I can put them new jrl clipper in the line up wow they have a new trimmer that has a new system to zero gap. I just came across your channel great job my brother

[@KriispyKing]

I agree with you ! Thank you sir ! Appreciate the love man ❤️

[@davidberry9226]

Idk know why but the JRL's blends seem softer. More buttery

[@bbauric]

Love both clippers, and no issues with my JRL's. Have to give the edge to the Instincts though....game changing clipper

[@KriispyKing]

Agree 100%!! If the Instincts could be a lot more quiet and ran a lot more cooler, INSTINCTS ALL DAY !

[@bbauric]

@@KriispyKing You may already know, but the black fixed faper blade runs much color than the gold one

[@deelyon9112]

@@KriispyKingima get me one of those just for detailing at the end no need to worry abt over heating

[@chrisl115]

@KriispyKing please put me onto where you got that real tree camp gown from? 🙏 great comparison btw

[@KriispyKing]

I got it from Illuzien. Hit this link my boy ! illuzien.com/products/hunting-szn-pro-cape?_pos=22&_sid=6a4a0bb71&_ss=r

[@999FINE]

Can you show how you got that camera angle on the haircut? Mount / ring light etc. Thanks.

[@KriispyKing]

Sheesh. Maybe will have to make a separate video for this!

[@davidpineda4764]

broo but the Bill pro 600 is a beast of a machine that has a brutal 9500 engine compared to the instinct it falls behind and the truth is the noise is quieter it has double speed 7200 and 9500 brutal a complete machine for fade and standard 🔥 regards

[@icb_91_]

How is the onyx compared with gamma boosted or sc rebel? If you tried them.

[@jt2475]

I got the onyx and rebel, I use a jrl taper blade on the onyx, not the fade and on the rebel use the faper blade it comes with. The rebel has the crunch sound and is better at bulk and Clipper over comb. The jrl blends softer. On skin fades I use the jrl and the rebel to take out the bald line, everything else I use 100% rebel.

[@joeyDi8764]

Cuz they won't turn on that's nothing but a switch... Need to hit him with the air comp.not the toothbrush either if can be helped. New ones same as the old ones , don't even need the second speed they won't replace the instinct either.👍🏼

[@nusense808]

I will only use the Instinct for clipper over comb moving forward. They’re too loud and get to hot (and yes I oil them)

[@gerry5971]

Change the blade. They don’t heat up with the carbon/daper blade. The gold blade will cook

[@Jay.S90]

I had the same issue with my jrl’s. Wouldn’t turn on. Turned out to be a pcb fault. Board needs replacing.

[@KriispyKing]

Thanks for the comment. I may have to contact JRL about it.

[@Andrew-cn6rc]

Helpful stuff 👍. I've spent hours listening to clipper comparisons. Think I'll stay with the magiclips.

[@jt2475]

I put the 3versince ceramic stagger tooth blade with the jrl cam they sell on my onyx and I get everything my magic clips gave me but the jrl has two speeds, runs cooler and is quieter. My fades have gotten better running this onyx set up on the slow speed. Just another option to consider as I was a big magic clip fan too

[@Andrew-cn6rc]

@@jt2475 Thanks for getting back to me. I actually bought the onyx last week, but still haven't gotten around to using them yet. I'm a bit concerned about the blade it comes fitted with. As looks very similar to the faper blade on the instincts, that I didn't get on well with when trying, as found it very sharp. So limited the angles I could use the clipper (if that makes sense). Maybe it's just me.

[@jt2475]

@@Andrew-cn6rc I put the gold jrl taper blade on mine. I don’t like the faper blade either. Most of my clippers have a taper blade but I have one with a fade blade specifically for taking out bald lines. The taper blade with the ceramic stagger tooth blade/cam I got from 3versince fades better than any clipper I have especially on slow speed

[@Andrew-cn6rc]

@@jt2475 Hi, are the gold and silver taper blades the same? Thanks

[@Andrew-cn6rc]

Also is it similar to the wahl taper blade. As in not sharp and scratchy

[@jasondookie1900]

I noticed when I used the gapping tool that came with the jrl and gapped the blades... it also aligned the blade as well and my guards were more secure on the jrl. Hope this helps.

[@KriispyKing]

Preciate that‼️

[@arnie1008]

What guards do you use? because when I zero gap mine it starts chipping into the guard when I fully close the lever

[@anonymouspononymous9078]

​@@arnie1008just commenting to know what guards to order too

[@simonchhetri699]

@@arnie1008its not because of zero gap its because its not centered properly, that sound it makes while using guards are because it’s hitting far on one side of the guard because its not centered.

[@robrealcuts]

Really debating between the 2 for my next clipper. But it’s a really tough decision

[@KriispyKing]

If you deal with more straight hair, the i would recommend the JRL. If you deal with more Coarse hair then I would recommend the Instincts. As you see in the video Both clippers can do either. I have a versatile clientele so with the JRL’s being the newest, the quietest, and the coolest running clipper in my station,I’m gonna have to go with those for now.

[@robrealcuts]

@@KriispyKing bet. Yeah my clientele pretty versatile as well. N I love my rebels but they just so loud. I want a hitting clipper but that isn’t annoying to my clients ears. Thanks bro

[@Godknowsblendz]

I have both jrls and a pair of ergos for coarse hair and it works perfect

[@matthewljr0809]

Did the new JRLs last for you with no issues boss? Trying to decide on them or sticking with magic clips

[@KriispyKing]

Still running perfectly fine as of now. There are a few cosmetic damages because they are all plastic, but other than how they still look, i have no issues.

[@_rah_rah_]

Same thing happened to me…..died as soon as the warranty was over. They only wanted to give me a discount on the older model. But that model is definitely not worth it, debating whether to even try the newer model.

[@KriispyKing]

Thats tough ! Yea with me dealing with past problems myself, I’m gonna have to really put these to test to see if they hold up. Not sure if they are worth the buy as of now, still way too soon to tell.

[@elbarberoloko]

on the stylecraft instinct put the black faper blade, that one dont get hot like the gold one

[@KriispyKing]

Preciate that. Gonna have to try that out. Thank you !

[@akhmadkusairi6759]

@@KriispyKing or swap to Jrl fade blade no worries to get hot

[@smittylamar]

And u cut nice asf

[@juanmarley5690]

Playing wit something a lil bit bigger?!? Pause!!! lol 💯💪🏽😆

[@Barberadel]

👍

[@Alanisrael12]

question do the jrls open up longer yhan the instincts ?

[@saidzueke4782]

I think so

[@504fadez]

Yes they do

[@isabellaleal1545]

Wouuuuuu

[@JohnSmith-bn7bl]

both are nice, and keepers... altho the onyx is smoother not as aggressive which i like.

[@davidberry9226]

I couldn't deal with that rattle though with the Wahl guards and they're the guards I'd use.

[@tonystr8cut]

Just cop JRL Onyx and mine don’t rattle with Wahl guards.

[@davidberry9226]

@@tonystr8cut what's the throw on them? Half? 1?

[@tonystr8cut]

@@davidberry9226 thew .5, 1 and 1.5 on there and no rattle.

[@bryanpablo2023]

Use the style craft tight guards

[@hallodude7024]

If you would choose between these both clipper, wich clipper would u pick?

[@Mogg_king]

I personally believe the JRL has a smoother blend and the SC is great for bulk removal and extremely aggressive needs. It punches, the JRL blends. That’s the best description I can give to people. Another thing is the JRL is a longer clipper so you can get a better flicking motion with it opposed to the SC one. I’ve used the SC for a year about and I’ve honestly always loved the JRL. The onyx one is definitely a tad better than the last one as well

[@hallodude7024]

@@Mogg_king Okay. Thanks.

[@edt6952]

Hello, is Onyx a replacement for old JRL or simply an additional model to the range?

[@KriispyKing]

ONYX is a newer Model now called the 2020C-B. A lot of different updates internally and externally.

[@edt6952]

@@KriispyKing I understand it’s a newer model but is it additional one to the range or replacement to the current one?

[@KriispyKing]

@@edt6952 that is something you will have to ask JRL. I do not have that information on production changes.

[@esenkz4571]

Я купиль ONYX 2 месяца назад и могу сказать что если на старый JRL поставить FADE нож то на работе почти нет разницы кроме оборотов и дизайна... рабочая время тоже не сильно заметно )) так как оба наицелый день спокойно хватает и в конце дня поставлю на разядку . Если у вас есть старый то купите FADE нож и будет круто

[@anthonyvaldez6239]

Them Jrl are sick all black. Kinds oc remind me of a phantom lol. U sick with them clippers

[@KriispyKing]

I agree ! Preciate that ❤️❤️

[@TitoCutsTampaBay]

Is it already shipping? Or did you get early access

[@KriispyKing]

PreOrders have already started shipping for certain vendors. But i do not believe they have hit the stores yet. From my understanding they sold way more than expected on the PreOrders so they are already backed up on the shipments for those. Very high demand for these right now.

[@jonasvann5387]

I feel like then jrl's compare more to the masters than the instincts... Still think the instincts have a slight edge

[@robrealcuts]

Which one you prefer ?

[@saidzueke4782]

Jrl 100%

[@geravez]

How much for your second pair??

[@KriispyKing]

The ONYX is going for $190 if you can find anymore Preorders available.

[@freeyourmind4349]

@@KriispyKingI just ordered some today. I’m ready to get my hands on these

[@user-ux3jz9mi2r]

Which of jrl is better at all ? Onyx or t or c?😢

[@izzhamaz3406]

In my opinion itx Onyx,cause some specs have been upgraded such as battery capacity ,and the price diff is just a little from the t and c

[@marcosgranados6964]

Instincts #1

[@KriispyKing]

Really tough to say now ! Lol

[@YOUNGAVE215]

Tpob over everything when specs is real close it comes to price

[@KriispyKing]

@@YOUNGAVE215 FACTS !

[@chris-li6om]

@@YOUNGAVE215tpob rubbish doesn’t last broken 4! U pay for what u get cheap as chips 🍟 😂 absolutely crap company

[@Mike-hy8cs]

is the new jrl heavier than the original?

[@KriispyKing]

Literally about the same give or take a an ounce. Cannot really tell the difference in the hand.

[@akhmadkusairi6759]

Jrl onyx shorter a little bit

[@504fadez]

JRLs don’t get hot🤪🤪🤪🤪

[@KriispyKing]

Not at all ‼️‼️

[@Tigerbalm1310]

Ohhhh damn. I was low key mad that I bought the JRL cause the way it felt vs my wahl and babyliss. I did a whole day with these and they never got hot

[@massterrbarber]

Jrl looks like my style

[@KriispyKing]

WILL NOT GO WRONG WITH THE ONYX !

[@713johnblendz]

I’m upgrading my batteries on them for sure tho @tomb45

[@KriispyKing]

Sheesh didnt know tomb 45 had a battery upgrade on these. I gotta look into it. Preciate that !

[@Jcutts707]

Keep ur clients off the phone so they can keep there head up lol.. thanks for the vid though been looking at both I think jrl for me.. 2 barber in my shop got the instinct and both lever screw kept coming loose so kept tighten them 1 has striped already.

[@KriispyKing]

Ive had zero issues with the instincts so far. But you wont go wrong with either one for sure ! Thanks for the comment.

[@desmondmitchell5602]

Lock tight works really good

[@Jcutts707]

@desmondmitchell5602 sounds good if it screwed into metal but it's plastic. Locktite and plastic don't go together. Clippers are not made to last anymore. That's y each company comes out with a new 1 every 6 months