Can this chainsaw chain be saved? Tecomec to the rescue...

In my last video I hit some metal in a large oak log. I've decided it's a bit too much to file by hand so I'm going to try to salvage it using the Tecomec Grinder.

[@Andrew_From_NB]

Hi Dick, thanks for this video, really informative and great descriptions as you went. I also appreciate all the great camera angles that you get as well, really helps with visuals for us folks watching! Glad to see the chain was able to be saved, those can add up after a while, so it was good to see this. Andrew from NB :)

[@inthebackyardwithdel438]

Very good video . I’ve seen the chain sharping tool before but never with that type of wheel . I will have to look into one of these . Thanks for sharing and glad you were able to save the chain ! Del

[@oldguyfirewood]

Thanks Del! The CBN wheel makes a big difference.

[@DustyRanch]

Those husqvarna saws are good saws! Last summer I had my 572xp in the bucket with me 35’ up. It caught in the back cut and ripped it out of my hands. (My imagination had it busting into 1 million pieces as I watched it fall) reality was I had to replace a Antivibration shock and went back to work. Glad you were able to salvage that Chain. Stay safe, keepitdusty, keep filming 🎥.

[@oldguyfirewood]

Hi Dusty Ranch. I just noticed this comment and one other form you that I hadn't responded to... don't know how that happened. Thanks so much for watching and subscribing. Yes... Huskys all the way!

[@DustyRanch]

@@oldguyfirewood no worries, comments get lost in ciber space sometimes.

[@ElmhorstJ]

I got same grinder and use the same wheels they are wonderful for damaged cutters !!!

[@oldguyfirewood]

Thanks for the comments! The CBN wheel makes a big difference.

[@Alan_Hans__]

I have a similar grinder and I use it mainly for evening out the teeth after a few sharpens with my fleabay Stihl 2 in 1 file. After watching your video I realise how much time goes into clamping and unclamping to sharpen the chains. Sometime in the future I might look at putting some electrification into the process of sharpening so that it clamps as soon as I move the grinder from the fully up position. I've found that the stone wheel tends to leave a decent burr when taking a heap off when you've had an altercation with some steel. I might have to look at getting 1 of those betterer wheels.

[@oldguyfirewood]

I only use the grinder to even out the teeth or when I’ve hit a rock or some metal. The grinder I have can be purchased with a pneumatic foot operated clamping mechanism, but it wasn’t worth the extra cost.

[@justinsantapole7507]

That was a nice video I was always interested in the the electric sharpeners I do a lot of hand filing myself due to working out in the woods. I just might have a chance to see how they work I seem to work pretty good.

[@oldguyfirewood]

Thanks for the comments Justin! I hand file 90% of the time, but when I have one damaged by hitting rock or metal, the bench chain grinder is the best.

[@DanielAtkinsFirewood]

I still have my Oregon grinder in the box.. I have been learning how to hand file over the last few years and even as messed up as your chain was I could get it back. The grinder would definitely be faster but learning how to recover I think is best at a guy like me that is still somewhat new at it..😊👍

[@oldguyfirewood]

Hi Daniel… thanks for the comments! You make a great point about learning how to hand file before using a grinder. I definitely could have hand filed that chain back but it is easier with the grinder. I don’t use it often but it is nice to have. Thanks for watching! I recognize your name from many live streams I’ve been on. You are one of the original “wood hounds”! Have a great day.

[@danshouseofsmokeandoutdoor7119]

I just started using a Oregon 410 it works good the vise don’t hold good as yours. Think I try and see if can tighten the Chanel up. Definitely lot life left in that chain.

[@oldguyfirewood]

Hi Dan. I’m pretty sure you can make an adjustment to the vise. Most of the time I hand file or use a dremel, but when the teeth are damaged you can’t beat a bench grinder.

[@FirewoodattheFurnace]

Looks like you resurrected that chain very well! Clean shaven!?!? Lol. Another great job my friend

[@oldguyfirewood]

Brought it back from the dead lol! I usually go “no shave November” through December. I went longer this year haha! Going to Cancun in a couple weeks so I want to get that sun on my face!!! Thanks for the comments Brad. See you on the livestream tonight…

[@fricknjeep]

hi there nice sharping . we do a lot of stuff the same , lots of wood there john

[@oldguyfirewood]

It’s nice to be around like minded folks. Thanks for watching so many of my videos!!

[@mikehughes2026]

Hello Dick, you brought that chain back from the dead, she’s cuttin’ nicely. Your grinder looks like a great tool, gonna look into one, very refreshing to see it’s not made over in the Red Menace. Take care and keep moving( great advice)

[@oldguyfirewood]

I love your comments Mike! I have one brand new in the box… never been opened (long story lol). If you’re interested let me know. I figure about $250 plus shipping. Thanks again and hope you subscribed.

[@larryhronesz5693]

Good job on saving the chain, I also have a grinder for really bad chains, the Dremel works good for touch ups but when they get that bad I think the only way is to grind them enjoy your videos

[@oldguyfirewood]

Thanks for watching and thanks for the comments! I agree with you… I don’t use the grinder too often, but when a chain is really messed up it’s the best way to fix it.

[@DeliveryBryan]

Where did you buy that grinding wheel ? I wonder if they make a wheel that will fit my Oregon 410-120 grinder !

[@oldguyfirewood]

I hesitated a long time before buying that wheel because of the cost. I should have spent the money much sooner... they make a tremendous difference. Here's a link to where I purchased it. www.diamondwheelinc.com/chain-saw-wheels.html

[@chrisartman6168]

Thanks for another great video. I use a stihl 2 in 1 file. It works pretty good for me. Those grinders are pretty slick. Definitely makes it quick and easy to bring a chain back. The only issue I have is that it’s too easy to take off to much of the tooth w/ the grinder if you’re not careful. But you did an excellent job with your explanation. Thanks again and keep on moving buddy!

[@oldguyfirewood]

Hi Chris. Thanks for the comments! You’re right about grinders taking a lot of tooth off. I don’t use it often… usually only when I NEED to take a lot off lol. Thanks for watching. I really appreciate it!

[@HilderbrandOutdoors]

Is that white oak? That saw went thru it like it was butter.

[@oldguyfirewood]

Good eye… it is white oak! It cut good, but as I mentioned in the video, one more stroke on the rakers and it will do even better.

[@HilderbrandOutdoors]

@@oldguyfirewood white oak is hard looked like it was really sharp. Thanks for sharing.

[@stevepreston7030]

I hit a rock last Saturday and my chain became toast as well. I manually file, but could not get it sharp, so it's at the shop now. I will pick it up later. I am fairly new to editing KZbin videos. I put up a video yesterday where I hit the rock with my chainsaw cutting some maple. It was a pain to get my spare chain on the saw near sunset, but I wanted to finish the load. Thanks for this good video! I want to get one of those grinders now.

[@oldguyfirewood]

Thanks for the comments Steve! I imagine the shop charges between $6 and $8 to sharpen? Thanks for watching!

[@redeagle6842]

I have a jolly also. Between that and my Sure Sharp grinder they keep my chains sharp and cutting big chips. Great video.

[@oldguyfirewood]

Thanks for the comments William. Sorry I hadn’t replied sooner. I really appreciate you watching!

[@user-cd7jx2td8n]

Hi Dick ~ After roughly 15 years of simply replacing them, we now have a pile of chains that number in the triple-digits. These chains, which are mostly Stihl brand, have varying levels of damage - from rocked out to simply dull. With the price of new chains rising past insane levels, it's time to get a good grinder. If it's not too much trouble, would you kindly reply and let me and your viewers know the Part and/or Model Number for your Tecomec Chain Grinder? By the way, I saw a reply in which you mentioned having one to sell. If this is still the case, I'd appreciate you writing back and letting me know how we can get in touch with one another. I've both liked and subscribed now, so please keep on making the informative videos, sir. 👍

[@oldguyfirewood]

Thanks for watching and subscribing! The grinder is a Tecomec “Jolly Star” grinder. It’s an Italian company that also makes the Oregon brand grinders. With your stock of chains you should definitely get one! I no longer have the one I had for sale. Below is a link to this model. www.baileysonline.com/tecomec-jolly-star-bench-mounted-chain-grinder-120-volt.html

[@user-cd7jx2td8n]

@@oldguyfirewood We own and operate our own mill operation, Dick, and having spent decades taking care of our own equipment, I'm a strong believer in investing in the best tools one can afford. Do you consider the "Jolly Star" to be the best chain grinder made by Tecomec and/or Oregon? Do you happen to know of any other makes and models that you would recommend? The way I figure it, the longer the list of possibilities, the better. A chain grinder seems to be a tricky subject, so thank you for you kindly for the help, sir.

[@oldguyfirewood]

@@user-cd7jx2td8n Tecomec make a super Jolly and the only difference is it has a foot operated hydraulic system to clamp the chain. I would probably go with this if I was buying one today. Since Oregon grinders are simply Tecomec grinders re-badged, I don't see either one being better than the other.

[@davidedwards3734]

If I can't get chain to sharpen I take to the shop. Not cutting enough, in my humble opinion to warrant buying a grinder. Basically just starting out. Great video. Have a Safe Day

[@oldguyfirewood]

Thanks for the comments David! I understand where you’re coming from. It’s a big investment if you aren’t using it a lot. Hand filing can correct about any amount of damage… it just takes longer.

[@davidedwards3734]

@@oldguyfirewood I'm still trying to learn to hand file. I use the 2 n 1 or the dremel. So far its worked for me. Will keep watching yall to learn. Thanks

[@jerryjohnson3047]

good video just wondering what to do with that log that ruined the chain?? can you still get wood out of it without ruining sawchain again?? keep vids coming

[@oldguyfirewood]

Thanks for the comment Jerry! I split off the piece I had already cut, found and eliminated the large nail, and cut and bucked the rest of the log up.

[@TheEverydayGods]

Maybe you answered this… but where did you get your cbn wheel? Thanks!

[@oldguyfirewood]

I got mine from this company www.diamondwheelinc.com/chain-saw-wheels.html Pricey but worth every penny.

[@TheEverydayGods]

@@oldguyfirewood Ok great. Thank you!

[@andrewsamanthamadison3320]

Nice sharpener! Is there a reason you went with that brand over Oregon? I know you mentioned they are one in the same, just wanted to know if there are any benefits? I’m looking to invest in a pull down sharpener soon! Thank you in advance!

[@oldguyfirewood]

Thanks for the comments! I researched both and just found a slightly better price on the tecomec. I bought 2 (I was going to set one up for .325 chain but changed my mind). So, I have a brand new one in the box, never opened, that I’ll sell for $250 plus shipping if you’re interested.

[@JohnSmith-tn1te]

@@oldguyfirewood still have the extra? I'm watching videos trying to make up my mind for 2days on which one to buy? Very interested! Respond ASAP before I buy one please. Nice video 👍

[@oldguyfirewood]

@@JohnSmith-tn1te thanks so much for watching. I no longer have the extra Tecomec sharpener. I would highly recommend it if you are planning on buying one.

[@digger0429]

Good sharing keep cutting

[@oldguyfirewood]

Thanks DIGGER… I really appreciate you watching!

[@blaablaahi]

I found your channel from this video. Thank you for posting it. Been looking at the 520 Oregon. The Jolly Star seems to be comparable. Subscribed.

[@oldguyfirewood]

Thanks for watching and thanks for subscribing! Tecomec actually makes theOregon 520. I have been very pleased with the Jolly star.

[@MountainManMurphy]

Really informative, Dick! I need a compact chainsaw for our upcoming trip to Alaska next year. It would be primarily used for cutting small to medium sized trees off trails, and for some firewood. Any recommendations? I'll be documenting all of our journey on my channel as well, please check it out!

[@oldguyfirewood]

Thanks for the comment! I don't have any small saws but I think if I was to buy one for your application I would look at a 16" battery powered saw... from what I've seen they are pretty amazing. If battery powered is out, I'd look a an Echo top handle saw. They seem to be the best bang for the buck.

[@MountainManMurphy]

@@oldguyfirewood Fantastic, thanks for the info!

[@craigwilson9560]

Great video! You have a great grinder. I ended up getting a stihl because my local dealer had an extra one. So he asked stihl if he could sell it and they gave the okay to sell it. Makes for fixing buggered up chain easier. I have a 2 n 1 and regular files as well! Glad it was fixable. I had a new chain, hit a spike an threw some teeth, i was like man what are the chances of that.

[@oldguyfirewood]

Nice deal! I don’t use it often but it’s great when I need it.

[@HanaBasara]

👌🙋🇷🇴

[@oldguyfirewood]

Thanks so much for watching!

[@firewoodathome]

Worked good.

[@oldguyfirewood]

Thanks for the comments. It’s cutting good now!

[@dragonspicks]

I sharpen chains professionally and I have the same type of wheel. They are hands down the best. I have 2 grinders now one for the teeth and one for the rakers. I sharpen many kinds and many lengths of chains longest being a 52”

[@oldguyfirewood]

Thanks for the comments! You are certainly more knowledgeable than I am if you do it professionally. I tried to hit the basics, but I’m sure you shook your head a few times at my explanation Ha! Thanks so much for watching and commenting. I hope you subscribe to my channel if you enjoy it!

[@dragonspicks]

@@oldguyfirewood honestly there wasn’t any head shaking here, no sir. It’s clear to me you know that chain sharpening is an art, by saying that we all learned how to do it differently however there is always room for inspiration from others like yourself. I’m 32 years old and I’m always looking for ways I could improve my work.

[@redeagle6842]

I have the same grinder. Also have my sure sharp. Love them both. Great way to keep ur chain cutting big chips.

[@oldguyfirewood]

Thanks for the comments William! Sharp chain is critical.

[@redeagle6842]

Didn’t think the first one posted lol. Much easier on your saw

[@woodchuckman1111]

Nice job got to keep chains as long as you can because they are expensive 🪵🪵

[@oldguyfirewood]

You are so right! Thanks for the comments… please subscribe if you like this sort of thing.

[@woodchuckman1111]

@@oldguyfirewood I did two weeks ago 👍👍