Can this prevent an Inframe? Cummins Mistake w/ ISX15. Kenworth W900L | Valvoline Cummins Restore

[@jackmartin3603]

Hey Sammy it's Jack the guy with the black Peterbilt. We met at the TA in Barstow about this time last year. I used that in my motor. it did the trick for me. I was using a gallon about every 3000 miles. Now I use a gallon about every 10000 miles. I change it at 12. I did it after I deleted everything, I wanted to clean all that crap out of there the best I could. That was about a year-and-a-half ago and I'm still going strong. Hope it works for you too

[@MakeCentsTrucking]

I. Remember you man!! I can’t wait to see if I get the same results 👊😆😎

[@jackmartin3603]

And I was going to say I didn't do anything special. I just dumped it in and drove. I don't remember what the mileage was when you were supposed to drop it. But I know I follow the recommendations I didn't change filters or anyting during the process. I'll see you again sometime take care bud

[@MakeCentsTrucking]

👊😎 good time know

[@jonscott7686]

Long story short Sammy is putting a Band-Aid on the real problem

[@jonscott7686]

MakeCents You’re putting a Band-Aid on the real problem

[@jonesinl.l.c.9931]

Had a 14 cummins did the same thing, but with a lot less miles... cummins recommended valvoline restore, tried it, and ended putting new pistons and rings in it. Super common on the 14-15,s and probably a few more

[@LaszM-o5o]

2350 ISX '13 engine. This stuff works. I have used it since I had 400,000ml and started to burn oil. I use it every 120,000ml and it keeps my oil consumption at reasonable level. Now I am at 1.2 million and going strong.

[@MakeCentsTrucking]

🙌🙌🙌 how do you use it? Full oil change every 120k? Needing to do it again myself

[@LaszM-o5o]

​@MakeCentsTrucking , yes. I change the oil between with regular part synthetic. Then the oil burning slowly increasing from 10,000ml/gallon to 5,000. Then comes the Valvoline Restore change what resets to 10,000. Btw, I have experienced the same cold leak issue. I needed to get fixed, because it failed on the company safety inspection. But the Valvoline saved me from an early rebuild.

[@Misesian86]

Schaeffer oil, Ultra Performance 10W30, will do the same thing they’re claiming and is much cheaper. Schaeffer has a has a powerful additive package that will actively clean the crud out. I’ve witnessed it in a used Volvo I bought. The first 75k miles of samples were terrible, but now they’re perfect.

[@Sprotdude17]

This valvoline oil has a 50% group 5 Easter base stock, that's what does the job. Schaeffer is a amazing oil but they don't use any Ester, if you want the closet equivalent to this valvoline oil the only other one on the market is redline 15w40 which is also a 50% Ester base stock. Those are the only 2 diesel oils on the market that use that much Ester, a high Ester oil will clean a gunked up gasoline engine in 10,000 miles (I know we're talking about diesels but thats not where my experience lays)

[@coolmike72]

It works!! I use less than 1/2 gal btw 15,000 mile oil change. Jerry recomended doing this oil change yearly to keep engine clean. I have next years oil change sitting at home in my office!! Keep a few gals with you at all times, it’s designed to clean the carbon from your rings which means it’s designed to be burnt off. Also, after running it I tried Delo oil, she did NOT like it, switched back to Delvac and all is good with the world!!!

[@MakeCentsTrucking]

I sure hope I can get same results 👊😎

[@MOONSHADOW-jx2tw]

Diesel Machine in Princeton Indiana has warehouse full of rebuilt engines CAT DETROIT CUMMINS they quoted me 15k out the door with a core. Takes 4 days to swap engine. 3yr warranty on some models. All engines go in dyno for break in . They do trans as well.

[@rollinghillstrucking]

Information.

[@MakeCentsTrucking]

I could go for a nice 3406e or a... nay gimme a 6nz 550 🤓🤓🤓🤓

[@PacoChannel]

Please keep us updated as to how it worked on your truck and how many miles is recommended to travel before the next oil change with that oil. Thanks!

[@MakeCentsTrucking]

ill run it to 20k miles, drain it and see what i stand :)

[@mattt3284]

Just finished my $85 pg VPB Restore cycle. Will be using the VPB from now on, although Delo 400 may produce less ash, and now the newest Delo 600, even less ash.

[@gregorygrice4808]

Hey Sammy just a suggestion you should send a oil sample in of your old oil and you can further more see what's going on with it I use a place called black stone they will send you a kit , there very knowledgeable its like 28 dollars or so ,

[@DJBIGTIME718]

Jerry told me the same thing. I just used 3 gallons mixed with regular oil... It helped a little. Im interested to see if it works by using the restore oil only. Jerry is the man!

[@Daniel-z2j2v]

Cummins tried this to my cousin’s motor before they changed the pistons and liners. It was under warranty so they wanted to try the cheaper way first. This was around 3-4 years ago.

[@DIYSEMI]

If that oil is dissolving all that carbon into your oil, consider changing your oil filter a couple times so it doesn't plug. Watch your oil pressure gauge too

[@chipperfluffy]

Yep or cerma

[@Robert-dy8jt]

I have a 2011 isx . Been using 5 gl lucas Pure synthetic in it for years , just hit a 970,000 miles going to do the inframe this week . Im also going to install a Spinner Centerfuge to help out with the carbon . I had the same oil leak it would leak when cold and seal up after 30 min of driving. That engine is only going to get worse, would not be suprised if your oil cooler gaskets fail and start leaking oil into the coolant (mine did) all down hill from there . Great video always good info. 👍👍

[@saugeyes]

Hope it works. However if it doesn't try treating the carbon from the top side if possible using brp engine tuner. Ive used it on carboned and sooted up direct injected outboards for years. I've seen leakdown drop from 40% to 5% after a couple treatments.

[@Angel-zp8tf]

Try the mobil delvac for me that is the best oil for trucks or Rotella , Im a owner operator I have 2 trucks and one of them is Cumming ISX for those type of engine it’s normal the oil consumption in my truck it takes 2-3 gallons between maintenance and I do my maintenance at 12,000 , what you need to worried is the pressure of the oil to the engine put some Lucas in the middle of maintenance. I stay away from shops I do the mechanic and maintenance they will rip you off!!! Stay safe out there

[@timmay2k]

Is the truck deleted? I got a paccar mx13 motor in my 579. Deleted has almost 900k miles on it. Runs great doesn’t lose oil in between oil changes I do do every 20-25k miles intervals.

[@truckerstyleshawn]

Looking forward to seeing the results

[@MakeCentsTrucking]

Me too brother. Sure hope it does the deal 😎😎

[@truckerstyleshawn]

MakeCents if not a piston and roadless Inframe kit is only about $1200

[@tommyreed4220]

I have a 2350 I learn more and more from u!!!I don’t go through much oil.I never have to add oil...Should I do this????

[@MakeCentsTrucking]

No. Only if you have oil consumption

[@chrispompano]

Do an internet search for it & read the hits on Bob Is The Oil Guy. Those chemists analyze it & posted the patent with the concise formula. Very unique chemistry.

[@impalaboy80]

Call or stop into Pittsburgh Power and get you a gallon of Max Mileage have heard of a lot of great results

[@behroozkhaleghirad]

My suggestion as a mechanic: remove the head and oil pan, pressure wash the block, crankshaft and the head with diesel. Don't forget the oil pump. Change the hed gasket and oil pan gasket and put it back together. One can do iin 1 day and not mach money.

[@jonathanbulman1184]

Please keep me updated, mine does the same thing!

[@nattydreadlocks1973]

High oil consumption is a byproduct of piston ring ware. You need new piston rings. Problem is, you probably can't buy just the rings. Keep a eye on your turbo also. One bad o-ring could cause her to run away. ✌

[@MakeCentsTrucking]

Or carbon packing around the rings. Stop by a shop and look at a cm2250 or cm2350 that’s being rebuilt. It’s crazy how they build up. Then rings stick

[@ralphalvarez7663]

Run a amsoil bypass filter, keeps soot to a minimum in the oil

[@PTucker0864]

I'd be worried about increased bearing clearances running the thinner oil, or maybe some crud loosening and clogging the oil pick-up screen? I locked up an old GM V6 years ago pouring in some motor clean stuff....it was a $500 car though...lol. Hope it works for you. I use high-mileage Mobil1 in my Hemi pickup to prevent seal leakage...it seems to work....no leaks.

[@100pyatt]

10-30 is the correct oil specification for that motor to begin with. 15-40 reduces oil flow and causes overhead starvation once soot starts building up in the oil, thickening it further

[@PTucker0864]

@@100pyatt , Good info. I've never seen 10w30 for trucks in the truckstops....guess I wasn't looking....lol.

[@kyleallen1835]

Interesting thank you!!

[@TerraFirmaX]

it'll be interesting to see how this works

[@MakeCentsTrucking]

The Arizona Homestead Project yessir. I’m ready to run through 20k and get fresh oil in and see

[@SixteenVoice]

Can he go back to regular oil after the change? Because if he keep doing 1600 USD oil changes, then, maybe time to get a proper fix?

[@bigsleeperstudios8865]

NPC_5600436935 it’s designed for one time every 100,000-120,000 miles.

[@Tennessee_Jon]

it’s just another tax write off so he’s probably saving money than fixing the problem. I can see his point but I rather fix it instead. But hey this ole 60 series leaks a gallon a week and I rather it leak than not. Once a 60 series stops leaking something is wrong.

[@zadokmotorfreight2423]

@@Tennessee_Jon 🤣🤣

[@MakeCentsTrucking]

Yes.

[@rollinghillstrucking]

@@Tennessee_Jon that's what I have is 60 series

[@robsamazinworld8159]

You should compare and contrast ref vs dry van vs flat bed rates

[@Pete-from-Tn]

Buddy hope it works. But you know Rawze thinks its snake oil. LOL But I think its going to work. If not its making the KW and the oil company rich.. We used to add Kerosene to the engines. That would cut the crud out of them. But then some it finished also. Thinking on my 95 model Series 60. It will just get a inframe. That cost almost buy's half of my parts. LOL

[@kingmike40]

I have a diesel mechanic who says that transmission fluid in the fuel tanks can do the samething, but he told me that back before the trucks were computers on wheels with dpf. so don't know if it would screw up something on todays trucks.

[@speeddemon9876]

I have a 2015 kw didn’t use any oil until the bottom end bearings got changed after high pressure fuel pump sent metal shards through the bottom end now I go through a gallon a week

[@reefgaming3996]

I had to change oil every trip of 3500 miles I added aftermarket second filter then I got 2 trips out of it around 900k miles 2009 Cummins isx 435hp I got rid of it

[@HinojosaRandy]

My 2014 cascadia is leaking oil from the passenger side oil pan gasket.it looks like it’s from the oil pan gasket but it’s coming from inside a space between the block and timing gear cover? It’s towards the front do you have any info on this? It’s a Cummins engine and only does it at start up and then stops leaking. Thanks

[@jonscott7686]

Do you know using 5 gallons at $13 gallon it is still much cheaper to add regular oil to it.

[@Acts238Church]

Good luck with that sir.🙂

[@MC-ns9ef]

If you idle your truck a lot-it increases carbon buildup.

[@skim4me]

Absolutely agree!! I cringe when I see these guys idling their trucks all night. They're asking for trouble.

[@rafaeltapia9908]

I'm asking for a friend... so if u delete your truck and remove all 3 filters does that burn up your turbo ??

[@MakeCentsTrucking]

No. If anything your turbo is working harder just to push exhaust through the 3 filters 👊

[@rafaeltapia9908]

@@MakeCentsTrucking thanks for the reply !!

[@HaveyouLovedandbeenLoved]

Makes sense bro , by the way I still watch just using my girls phone . Keep us posted!

[@skim4me]

I have a dd15 with 500,000 on it. I change the oil evrry 60,000 miles. I've never had to add oil. I don't even check my oil level anymore. I've always used 10w30.

[@MakeCentsTrucking]

2010 dd15 i had was the same. Never a drop low

[@topdoglogistics1406]

Try using the catayst from Pittsburgh Power, great for cleaning carbon. I swear by it

[@timmay2k]

TopDog Logistics I use that in my Mx13 motor. Expensive but does work also helps fuel mileage

[@topdoglogistics1406]

Big Tim's Trucking LLC I swear by it, I was starting to consume oil then started using that product and it cleaned itself up. Plus 650,000 trouble free. It maybe 240 a gallon but it goes along ways for sure. I’d talk to make cents if I had a way to connect with him

[@alexpatino498]

Did you have any blow by coming out of the blow by tube or the dip stick? I’m losing a gallon every 2 thousand miles, I have no blow by and I was wondering if this is my problem or if it could be the valve seals.

[@oscarcamacho6183]

I have 2006 w900 with a cat 6nz and I go thru 1 gallon every 10k miles and I think it leaks out more then what it burns and the engine has close to a million miles

[@darylwirth9423]

I switched from 15w40 to 10w30 and cut oil consumption in half or better.

[@thomaskirkpatrick4031]

Man oh man, that's an expensive oil change. Can't wait to see if it works.

[@DrivenTrucking]

I’m looking forward to this because I’m next LOL

[@dronetrucker]

I have a Cummins N14 celect, best motor ever built, 2million miles and counting. Two inframes also.

[@dimab8753]

Those engine can do up to 2 million miles without inframes with proper maintenance. Your with two already sounds not the best. My friend has 2006 cat c15 acert with almost 1.4mil miles no inframe, original turbos just changed 2 injectors.

[@dronetrucker]

@@dimab8753 first time a valve broke, decided to do a rebuild, the second time a mechanic fucked it up, and had to rebuild it, but you are 100% correct.

[@timbutler259]

My Volvo d13 doesn’t use any oil between 25k oil changes. 750k miles on engine. But I hear this a lot on Cummins engines. Keeping my fingers crossed.

[@rayoca9489]

What about amsoil and there additives? Just curious Great vid ! God Bless Brother

[@rogergoff5874]

Be interesting to see how it works. There is a blue synthetic on the market for 4 wheelers s also which is pricey. Don,t know much about it so, yea keep us up to date. Take Care of old Elimae . ! Also I sent you some stuff on FB messenger ? Don,t see too much action on Rate Chasers yet. Need to fix the Background photo and delete the old ones. There's like 3 pictures for the group that come up. I know somebody said the correct background is your truck with the shifter extension. Any way when you get time to deal with it.

[@miltechmoto]

Where is the update for this video?

[@crazzylee]

You can use a hydrogen fuel cell system to clean the engine like new.

[@Ranchready496]

What the Diablo is that

[@jacobsimcox133]

I'm afraid this is a band-aide to a problem if it even helps at all. Carbon packing around ringlands on top of the compression rings causes "glazing" to the cylinder walls (basically polishing the Inside diameter of your cylinders down past the cross hatching.) because carbon is harder than the steel sleeve. Without out cross hatching on your cylinders your oil doesn't adhere to the the cylinder walls as evenly which compounds the problem further by making it worse faster. Just plan on doing cylinder packs sooner than later. Get that thing freshened up and keep hammerin my dude, Best of luck Sammy B!

[@davidschabel4664]

My first pete a 1963 352 had a detriot diesel a gallon a day eve of it didn't run, normal way back then pull toy here

[@MAXXEDOUTTRANSPORTATION]

I drive isx Cummins and I add 7 or 8 gallons between oil changes change oil every 20k miles

[@MakeCentsTrucking]

Same here. We’ll find out in the next 20k if it’s worth a purchase

[@timothymcvay7286]

I hope it works out

[@Jerzeyguy]

Add an oil by pass filter. Best. Money you’ll ever spend.

[@truckinnuttz7038]

I know this is old but from which point did you run the by pass supply line. Thanks in advance

[@Jerzeyguy]

@@truckinnuttz7038 There’s a fitting by your oil filter in the block you run it from there

[@truckinnuttz7038]

@@Jerzeyguy thanks do you recall the size i think id like a cut off valve as well thanks

[@Jerzeyguy]

@@truckinnuttz7038 no I don’t , it does keep your oil / engine cleaner. The soot is what kills The longevity of the new engines

[@truckinnuttz7038]

@@Jerzeyguy i just purchased the valvoline blue restore. Im going to run that. thanks I appreciate ya

[@rickmartin6217]

I had blow by on my isx, and used Schaeffer oil twice and it stopped

[@drec.134]

Could I use this in a CAT C12 motor!

[@TruckingWithTay]

Let’s goooooo I want to know the results?

[@MakeCentsTrucking]

Bro, I can’t wait to see. Give me a month or so and we’ll know 😎👊

[@williamspence1294]

That's expensive my friend but I guess it's worth it !

[@dieseldoctor9294]

Hope it works for you but don't be surprised if it doesn't help, get ready for a overhaul with updated anti carbon ring liners and pistons. At 700k plus mileage on a isx cm2250 or 2350, it's time for a overhaul anyway. Keep us updated on it. Keep the Shiney side up!

[@DIYSEMI]

5 gallons in 14,000 miles is some serious oil consumption. Never heard of this, very interested to see the results.

[@Maxim22vition]

That's because he's using a low viscosity oil. If he would jump to 15w40 or something higher like 15w50 oil consumption will drop significantly.

[@MakeCentsTrucking]

I’ve been using Mobil Delvac 15w40

[@dimab8753]

@@MakeCentsTruckingtry maybe adding a gallon of Lucas, that shit is tick AF, maybe that will stop a little oil consumption.

[@Justadudeman22]

You better let me know buddy !!!!

[@markm0000]

Man I hope that works. I’m burning about a qt every 1k. It’s annoying to keep adding oil every week.

[@Pfeifer6969]

I was told that this oil was discontinued is that true

[@MakeCentsTrucking]

I don't think so. My friend in Tx can't order in Tx but we ordered it here in Chattanooga at the MHC dealership last month :)

[@doughboy6020]

What type of oil are you buying from wally world ?

[@blackfivetrucking7674]

Dough Boy The same you buy at the truck stops but $10-12 cheaper

[@MakeCentsTrucking]

Mobil Delvac

[@doughboy6020]

@@blackfivetrucking7674 Ok I just wondered....I thought maybe like tires they sell..there built to a certain standard to allow name brand to put there name on.Maybe that's just all hearsay

[@topdoglogistics1406]

I normally use 1gal every 12-15k

[@novalifetrucking345]

Same here my isx15 & C15 take about 1 gal 12-15k. Best thing to do is an overhual adding 5 gal before oil change is CRAZY!

[@Mangu1718]

I just did an Oil Change with that oil, not the Restore though , keep us posted on results

[@DK-fq3hy]

01:25 hi cents...If there is concerns about carbon build up on the ISX I would probably recommend you to install an oil spinner 976. It may be a considerably more affordable than expensive oil changes. If you are interested send me a message and I'll direct you to where you'll find every single part needed with diagram for cummins. DIY.

[@tsimmons1974ts]

I hope it works Bro 👍🏾👍🏾👍🏾

[@angelfain8040]

Hey Sammy, this is Angel, how many miles do you have on your Cummings?

[@MakeCentsTrucking]

709k I think it is

[@rilloroc]

I was at 500k on mine when Cummins recommended I use that for 1 oil change. I went from using 3 gallons between intervals to using 1 or less between. I also started averaging an extra mile a gallon. What I'll add though is my truck wasn't demandated, and after that started having to drop and clean that DPF about every 80k or so.

[@ryanstaysloaded]

Next time drop $1700 on chicken lights and chrome.

[@princeismypitbull5432]

fuck it chicken mcnuggets

[@bhitt603]

1,340,000 on cm870 full delete still running strong,zero gallons burnt oil, changed every 12,000 mi....6.2 mpg just saying

[@jackmartin3603]

Yeah me too 854000 miles emessions deleted.borg Warner turbo.. Guess mine didn't know it was supposed to grenade @ 600k. Keep on truckin bud.

[@bigsleeperstudios8865]

Hey Sammy, can you find out if this can be ran with an ops filter system? I know it’s only designed for one oil interval but I wasn’t sure if it was ok with the ops.

[@MakeCentsTrucking]

I’m sure you can. Ops is just a filter system. I’d call ops just to be sure though

[@bigsleeperstudios8865]

Ok I’ll do that. My truck has 710,000 on it and I have the ops system I’m gonna put on at the next oil change. I want to run the Valvoline blue and see how that works. I’m usually at a gallon at 10,000 miles or so and I have been using 10/30 rotella t5.

[@DrivingByBraille]

Sleeper Studios the OPS system has a shut off valve. So you can stop the oil from going through the OPS system.

[@glennworley1351]

Hey Sammy how many miles can be expected to get on the ISX engine before a rebuild is needed? I've looked at some truck with around 600K on them from TMC and was curious about the engines. Thank you Glenn

[@NKM10212]

This is happening to me right now.. My truck is at Cummins

[@NKM10212]

Can't wait to see how this works

[@MakeCentsTrucking]

Me too man 😎😎

[@dougwiggins4859]

What oil are you running on the regular sammy?

[@hisway1995]

That $1,700.00 Should Have Been Towards An Overhaul...Wasted MONEY..On OIL...

[@joshcecil5892]

What has been your oil change intervals? And how many miles do you have on her?

[@MakeCentsTrucking]

18-20,000 and 710,910. Been using Mobil Delvac

[@dimab8753]

@@MakeCentsTrucking I thought you doing oil changes at like 12-14K miles, since you own a truck especially those 2250,2350 Cummins. If you follow Rawze he was saying to even change at 10k miles cause of that carbon buildup. My uncle switched oil to Rotella and saying that now he adds less than half what he used to add. He has 2350 with 850k miles, no rebuild yet.

[@joshcecil5892]

@@dimab8753 I'm about to jump into a 2350 and that's my game plan also. An oil change a month. It may be an extra 33% in oil cost that I'll try to offset by doing it myself, but I've never been a believer in the long term effects of any type of restore product. I'm hoping it works out for our boy makecents though 👍🤞 good luck

[@100pyatt]

@@dimab8753 stick with a synthetic to begin with it as far superior detergency to stop this buildup

[@thomasvittetoe1930]

How many miles are on the truck

[@truckerken]

I have the same engine.. time for a rebuild

[@yosiasmeimen9888]

I can’t find this oil does anybody know where to get some

[@MakeCentsTrucking]

I went to my local Kenworth dealer and they ordered it for me.

[@yosiasmeimen9888]

Hey Sammy I’m hear this oil was designed for a particular isx engine do you think it would work on my isx cm871

[@gabinovela2767]

How long do you leave it in?

[@MakeCentsTrucking]

Normal oil change. 20k miles

[@hisway1995]

Oil change is not your problem...Fix The Leak...You Can Add GEAR OIL and it Wouldn't Help...

[@MakeCentsTrucking]

Lol hang around. The leak isn’t the majority of oil consumption 🤓👊

[@matthewsones5287]

Better roll some bearings in it at the minimum. My ISX locked up at 700,000 miles. Cummins even recommends bearings at 500,000 miles...

[@simentalg]

Matthew Sones did you do an oil analysis?? Maybe you had more then one issue going on!!

[@patryk2497]

Bearings at 500k is correct ! Better to be safe than sorry

[@matthewsones5287]

Guillermo S nope decided to get away from the Cummins after loosing my pocket book in them. They are strong engines but aren’t built to what they use to be. I went back to being a CAT owner...

[@jonhmore6671]

Howmuch it cost the bearings???

[@matthewsones5287]

jonh more depends on door rates in your area. My area high side would be $150 an hour and I can’t remember the book time on them but they can easily be done in 8 hours.

[@wayneblue5370]

Do they make anything similar for the paccar engine?

[@MakeCentsTrucking]

You can use this. But if you don’t have blowby and bad oil consumption I wouldn’t worry with it

[@wayneblue5370]

@@MakeCentsTrucking thanks for another information video, I can't wait to hear the results. No blow by, but definitely losing oil.

[@chrispompano]

Can only be purchased thru Cummins dealer now $81 A gal.

[@makeitpay8241]

are you pulling oil samples? the engine you save may be your own.

[@MakeCentsTrucking]

Yes. All is well

[@makeitpay8241]

@@MakeCentsTrucking outstanding

[@agustinvaldes6223]

I have the same engine...Cummins did the overhaul at 370k under guarantee....they told me it will do this againg...i have 572k and star doing the consumption again..looking to delete the whole system..good luck..

[@christophermoody6840]

@5:04 "92 gallons and 35 cents". Huh? Just joking... I start to get loopy after I been talking for awhile too.

[@MakeCentsTrucking]

I caught that when I said it. Laughed and thought oh well lmao I say the wrong thing all the time bahaha

[@rollinghillstrucking]

@@MakeCentsTrucking nothing wrong with being imperfect lol

[@100pyatt]

Too bad Valvoline didn't sponsor you for this test !!

[@carsonmiller9658]

Just curious, what year is your Kenworth? It's a beautiful truck.

[@MakeCentsTrucking]

Appreciate it man. She’s a 2014

[@karlbaker1943]

I would Not buy the last part known to man from MHC Kenworth in Chattanooga! Go to Knoxville. Dont have any service work there either. I have used Valvoline 15w40 in my 600 cummins and it's got almost 800k on a Recon. Uses 1 to 2 gallons in 20k.

[@MakeCentsTrucking]

Used them for years and my truck keeps rollin 🤓🤓🤓 but I only buy parts 👊

[@alexdowell1663]

Doesn't having the wrong size gear ratio cause a motor to burn more than usual? I would also look into that.

[@05trucker55]

Should someone with a paccar engine do the same ?

[@MakeCentsTrucking]

Only if your burning a lot of oil.

[@kenoconnor2257]

Should have talk to Pittsburg power,,they have a engine oil flush SYSTEM, machine ,, could have , SAVE U BIG BUCKS !!!!,

[@Lost_AtSea_]

Sounds like engine blow by. Bad crank case. ( inframe time!)

[@MakeCentsTrucking]

Na 🤓

[@jeconsta]

And I thought the oil consumption on my ISX it's bad because I have to put 2 gallons in between oil changes (10-12k miles)