Can we fit Cleetus in "Eagle"??? Titanium vs Chromoly

  Рет қаралды 214,285

CJ Race Cars

CJ Race Cars

24 күн бұрын

Quick update on what we got done this week also a visit from @CleetusM to do a test fit to make sure there is enough headroom in "Eagle". Plus some clarity on what is and isn't titanium on the build!!!
Merch & Parts:
cjracecars.com
Social Media:
IG: / cjracecars
FB: / cjracecars
#CJRC #CJRaceCars #CameronJohnsonRaceCars

Пікірлер: 685
@CJRaceCars
@CJRaceCars 22 күн бұрын
Never had to fit someone this big in a race car 😅. Thanks everyone for following along. Merch is live on the site. Cjracecars.com
@bigswingin6316
@bigswingin6316 22 күн бұрын
Shoving a giraffe in a 69 camaro lol
@bigswingin6316
@bigswingin6316 22 күн бұрын
Great work yall are killing it! Hope this build makes your channel boom!!
@V0S1N0
@V0S1N0 22 күн бұрын
It is frustrating that this project cannot afford the cost of him putting on a suit/helmet + a layer of temporary foam so there is no wondering how high it will be later.
@CJRaceCars
@CJRaceCars 22 күн бұрын
@@V0S1N0 he has more than enough room now. If it was close we would 100 percent check before moving forward.
@Scootermagoo
@Scootermagoo 22 күн бұрын
Being a gentleman of considerable height *I'm 6ft5 and a long upper body* I can appreciate the problems you guys are having, it would probably be worse with me fitting the seat.
@joshcollins103
@joshcollins103 22 күн бұрын
Came here because of the cleetus video, subscribed because you guys are top notch! Can't wait to watch the Eagle run 5's!! Great video keep it up
@CJRaceCars
@CJRaceCars 22 күн бұрын
Thanks for the sub!
@tenman7242
@tenman7242 22 күн бұрын
Same here. Now I have a new channel to watch. These guys are the best. Instant sub.
@mckrackin5324
@mckrackin5324 22 күн бұрын
Gonna be odd watching it run slow runs in the 6s while the boys dial it in. lol... You wanna bet they hit the .00 wall for a while? It was fun seeing them stuck at 10.0 and 9.0 and 8.0 and 7.0. Looks like a 6.0 wall is inevitable ;)
@bmokez
@bmokez 22 күн бұрын
Same
@eianmoretz
@eianmoretz 22 күн бұрын
Same! One of the best parts is the blatant honesty, transparency and “it is what it is” tone from ya boi with the clean cut
@FarmerFpv
@FarmerFpv 22 күн бұрын
Cleetus has left the building and all business Garret in deep thought. Safety is the main priority. That man knows what he wants. CJ Race Cars deals with the first Floridian Swamp Giraffe in history. 😂😂
@WowCreativeUsername
@WowCreativeUsername 22 күн бұрын
I like how you answer people's questions. Understanding they don't know all you do so answering respectfully. Also nice seeing the detail work on the chassis.
@CJRaceCars
@CJRaceCars 22 күн бұрын
Love what I do and it’s cool seeing other people interested in it also.
@ArchAngel-FJB
@ArchAngel-FJB 22 күн бұрын
CJ race cars are widely known for making some of the nicest chassis cars out there. That didn't happen by accident. Y'all put in the work to earn that reputation. Glad to see y'all getting more exposure with this Eagle project.
@TheRyanCape
@TheRyanCape 22 күн бұрын
I work for a top fuel team. Our seat is held in with dzus fasteners. Good enough for a 300+ mph car, good enough for Eagle
@mckrackin5324
@mckrackin5324 21 күн бұрын
It would probably be fine with no fasteners. The harness does all the work. The seat is just a little cushion between the driver and the cage.
@wobblysauce
@wobblysauce 21 күн бұрын
@@mckrackin5324 They hold it in while you try and get out.
@russellharper3027
@russellharper3027 21 күн бұрын
@@mckrackin5324 Harnesses don't do all the work. They contain certain parts of the driver in certain directions, but the seat does much more. In a car like this, where the seat is a tub contained by tubing, it works. In the case of traditional "upright" seats that aren't contained by the chassis, a few .080" (maybe less? I don't recall the wire diameter of dzus springs) and a few little buttons are not enough. They just aren't. I see people apply this "dzus logic" to seats where it doesn't apply (even some very talented racecar fabricators that we may be watching) and put drivers in harms way. Enough sprint car drivers ended up outside their cars in the 80s that people realized the obvious. One way or another, the seat has to be contained. If you need a source, I've crashed the f* out of a lot of racecars in a former 18 year career as a driver, and spent my over the hill lifetime around career racers (not just drag racers, whom aren't in the habit of crashing very often). I've also been a racecar fabricator in USAC, NASCAR, Indycar, SCCA, NASA, NHRA, and several others for the last two + decades. Harness do what they do, seats do what they do.
@lawhornracing6921
@lawhornracing6921 21 күн бұрын
@@russellharper3027keep in mind this will be a carbon bucket with a form mold seat like formula and nascar cup now runs. Not a run of the mill kirkey. I don’t know what difference this makes ?
@mckrackin5324
@mckrackin5324 21 күн бұрын
@@russellharper3027 We're talking about this type of car specifically.
@banginracing
@banginracing 22 күн бұрын
I like how CJ keeps referring to ride height in reference to crank centerline Dude knows what works, it’s all in the angle of the dangle
@orb8176
@orb8176 22 күн бұрын
There is a reason cleetus trusted y'all to build this car, quality is second to none and it shows.
@mcmillan1963
@mcmillan1963 21 күн бұрын
I was waiting for you to tell him amputation with titanium prosthetics was the next step. Nice work 💪
@CJRaceCars
@CJRaceCars 21 күн бұрын
😂
@dtw322
@dtw322 22 күн бұрын
Thank you for including us on this journey. Very good video.
@SwiftSlots
@SwiftSlots 22 күн бұрын
Mr Seat Man does NOT look happy 🤣
@SWF734
@SWF734 22 күн бұрын
Exactly what I thought 😂😂
@camjones1106
@camjones1106 22 күн бұрын
I reckon
@MrIke303
@MrIke303 22 күн бұрын
Cleetus is paying for this lol. Gotta be able to fit. Still… I’m sure it can be frustrating.
@user-wf2bs2nj8v
@user-wf2bs2nj8v 22 күн бұрын
I can look unhappy when I'm in deep thought... Lol. That was the case at that time. Sorry , I'll work on it 😂
@JonHop1
@JonHop1 22 күн бұрын
@@user-wf2bs2nj8v Even if you felt a little frustrated, thats okay man, that is the nature of the business. And Garrett is an anomaly in how tall he is, and also how much head clearance he wants. In my opinion, I feel like the current setup was more than enough and Cleetus had plenty of room, but its Cleetus car, and if he wants it lower, and it can go lower, thats what has to happen. 😆... I cant lie, I would have probably been a TAD annoyed, but at the end of the day, it is what it is. I know you have put a lot of work into it.
@mopar6manbrad390
@mopar6manbrad390 22 күн бұрын
I think CJRC has built the best looking drag car of all time. When they built Monza’s Chevelle. That has to be one of the best looking cars he has ever built. Cleetus is going to have a badass race car when Cameron and his crew is done.
@RUSERIOUS76
@RUSERIOUS76 21 күн бұрын
yeah that is a sexy car. I have a screen shot saved in my phone of it Lol
@JonathonDelumyea
@JonathonDelumyea 20 күн бұрын
Monzas car is probably the best chassis car in the world just beautiful and functional
@aegixxer1
@aegixxer1 22 күн бұрын
You guys are killing it. Eagle might be done before LeRoy's body!
@BzraHax
@BzraHax 22 күн бұрын
Cleet is a good sport about asking for what he wants/needs. CJR are good dudes for making it happen!
@Edizzle15
@Edizzle15 21 күн бұрын
He’s definitely not like Duckstrom. Garrett has a lot more class and respect for others.
@steve45
@steve45 22 күн бұрын
Gotta echo the Cleetus crew, Its his influence that brought me here. However, I'm here for this channel. The detail and knowledge on display is crazy! I',m excited!!! Dont Rush it! Do it right!!!
@baby-sharkgto4902
@baby-sharkgto4902 22 күн бұрын
I’m already looking forward to the next seat height measurement video 👍
@CJRaceCars
@CJRaceCars 22 күн бұрын
💪🏻
@douglasprostock7086
@douglasprostock7086 21 күн бұрын
Sir you explain everything to your audience with patience to educate us in the build process.. Not too many folk do that.. Im sold on your channel !!!
@CJRaceCars
@CJRaceCars 21 күн бұрын
🙏🏻💪🏻
@jesscneal
@jesscneal 22 күн бұрын
Really liking your videos Cameron. Concise and to the point, no fluff and great explanations. Just grabbed a shirt thank you for sharing the build!!
@Powershift
@Powershift 22 күн бұрын
It's so cool to see the process. It's awesome to document the build, because once she's a full time race car most of this won't be known to new viewers.
@kariannestudeman1909
@kariannestudeman1909 22 күн бұрын
Cleetus has been fitting himself into cars for most of his driving life, now a car that's fit to him, {do you guys do airplanes? no, too bad} I look forward to when the Eagle is done and someone else sits in the Eagles seat and can't see over the dash. your crew is killing it keep up the good work!
@davexander4142
@davexander4142 22 күн бұрын
Cleetus has a very loyal following - you either build everything on point, or someone is guaranteed to call you out... only the best!
@danhammond8406
@danhammond8406 22 күн бұрын
Yup
@sjv6598
@sjv6598 21 күн бұрын
CJ is always ‘on point’ regardless of who the customer is. He builds some of if not probably the nicest and safest cars out there. Anyone who has the audacity to ‘call him out’ better know what the F they’re talking about 😊
@kevincharles1983
@kevincharles1983 21 күн бұрын
And they probably have no idea how to build a car. Let the professional do what he does people
@kevinthomas8025
@kevinthomas8025 22 күн бұрын
Clicked fast on this one, I've been watching old videos of y'alls all day lol
@markdavid4773
@markdavid4773 22 күн бұрын
It’s gonna be hard to squeeze a giraffe in there, but I’m sure y’all can do it🤣🤣🤣🤣🇺🇸👍
@obsessioniskey
@obsessioniskey 22 күн бұрын
The work you guys put out is top notch. Thank you for sharing this with us
@nickmendez5546
@nickmendez5546 22 күн бұрын
Sticking a Giraffe inside an Eagle is a straight-up magic trick. You guys seem up to the task! Also, I'm blown away by the speed at which you guys work.
@johnqpublic2718
@johnqpublic2718 22 күн бұрын
For a lot of guys, "Illegal and Expensive" is part of the fun!
@CJRaceCars
@CJRaceCars 22 күн бұрын
True lol
@Doncan0823
@Doncan0823 21 күн бұрын
Smokey Yunik said it best, if you’re not cheating, you’re not trying…
@iLLuZioNz518
@iLLuZioNz518 22 күн бұрын
I've been here since day one of your channel and I'm happy to see you're finally getting the eyes on you that you deserve keep killing it bro
@CJRaceCars
@CJRaceCars 22 күн бұрын
Thanks for following 💪🏻
@Phillyracingsource
@Phillyracingsource 22 күн бұрын
I’m so glad cleetus came to guys to get this car built
@lightning9279
@lightning9279 22 күн бұрын
Don't know what impresses me more, the skills to build that beast or your haircut. Someone does a wicked good cut. 💪💯
@randomfpv22
@randomfpv22 22 күн бұрын
Man those tube fit ups are “chefs kiss” perfect. I used to help make roll cages here in Australia. Beautiful work guys, absolutely world class
@pilbaraman1755
@pilbaraman1755 22 күн бұрын
Thanks for the updates... going to be EPIC
@MrIke303
@MrIke303 22 күн бұрын
Damn, it’s pretty incredible to see the welds you guys lay down. There’s zero discoloration from the heat fluctuating. Freaking badass.
@jeffduncan2547
@jeffduncan2547 19 күн бұрын
Thanks for the explanation! I like the way you describe things, it flows very well!!
@v4yt126
@v4yt126 21 күн бұрын
Thanks for the time you take to explain everything, what a superb shop
@vehdynam
@vehdynam 21 күн бұрын
Great information ! Keep the updates coming. Thanks.
@andycocchia4202
@andycocchia4202 21 күн бұрын
Man, these are some great videos. Great insight. Keep them coming pls! I’ll watch every one.
@petekobraoutdoors7324
@petekobraoutdoors7324 22 күн бұрын
Luv the welds,nice'n' clean! Cleatus is a tall bugger,eh? 😆 Nice to see how these race cars are put together... Lookin great guys....
@CJRaceCars
@CJRaceCars 22 күн бұрын
Thank you
@TheLastTater
@TheLastTater 22 күн бұрын
Thanks for sharing with us. Very exciting!
@chryracer9918
@chryracer9918 22 күн бұрын
Glad to see you uploading again. I do appreciate the info and tech on the moly and titanium stuff.
@shred_zed1
@shred_zed1 20 күн бұрын
I love how you guys are safety prioritized. Making the fastest and SAFEST stuff out there. Incredible
@markpayne1223
@markpayne1223 20 күн бұрын
Y'all guys do awesome work !!
@TheKevinhaeb
@TheKevinhaeb 22 күн бұрын
Love the work and attention to detail! Always wanted to get into fab and now I can see why Tye works to such a high standard. Keep the vids coming!
@robertbannon6361
@robertbannon6361 21 күн бұрын
Good for all of you guys ! I love seeing your subscriber count go up! Keep it up fellas!
@josiahpoirier5449
@josiahpoirier5449 21 күн бұрын
So nice to see a chassis builder upfront honest and respectful. Well done.
@davidzimmer2694
@davidzimmer2694 22 күн бұрын
Cleet has two new children. I think he's finally thinking ahead about safety and getting home from a race. Nothing wrong with that.
@whosaidthat5236
@whosaidthat5236 19 күн бұрын
Damn man you guys are killing it! Great work.
@chrisfarr5909
@chrisfarr5909 21 күн бұрын
WOW you people do an incredible amount of work. WOW! good work!
@stephenlea5765
@stephenlea5765 22 күн бұрын
Thanks for the build details & the explanation.
@ojscustoms9251
@ojscustoms9251 22 күн бұрын
I hope some of the new viewers cruised this channel and watched some of the other builds from previous years. Nothing but top shelf stuff.
@stevenallen4123
@stevenallen4123 22 күн бұрын
I could learn all day from you big dawg!!! I knew Tye had an awesome background and seeing the quality you guys produce, I can definitely see where he learned it from!!! Keep it up!
@chrisobrien9334
@chrisobrien9334 21 күн бұрын
Great looking work lads. Your attention to detail is amazing.
@MyCatW3ll
@MyCatW3ll 22 күн бұрын
Fine looking operation you're running there. I'll keep watching
@cleric670
@cleric670 21 күн бұрын
I love how your videos are short and sweet with no outro, I never realized how much I miss low production videos.
@dbus08
@dbus08 22 күн бұрын
Can't wait to see the final product.
@chadsherman8851
@chadsherman8851 22 күн бұрын
Challenging!! Cameron and the guys eat it up💪🏻 CJRC#1
@joshshelton796
@joshshelton796 10 күн бұрын
Awesome video guys!
@dereklancaster2303
@dereklancaster2303 22 күн бұрын
Yall do some fantastic work guys.
@ThomasJoseph315
@ThomasJoseph315 21 күн бұрын
God bless yea all! Good luck with the build!
@syx3s
@syx3s 22 күн бұрын
respect to the guys building that thing and making it look easy.
@kevinsimmons2815
@kevinsimmons2815 21 күн бұрын
I really can’t wait to see this car finished and y’all do an amazing job
@chasprice2260
@chasprice2260 22 күн бұрын
Man i can't wait to see this thing as the build continues. Yall do some fine work for sure!
@TimMiller-bs8ou
@TimMiller-bs8ou 22 күн бұрын
Can't wait to see this absolute unit running 5s cleetus could not have chose a better company and team to build him an absolute ripper yall got a subscriber for life
@CJRaceCars
@CJRaceCars 22 күн бұрын
Thanks for the sub 💪🏻
@robcollins7951
@robcollins7951 18 күн бұрын
I can't WAIT to see this beast done.....
@shawnwalsh5430
@shawnwalsh5430 22 күн бұрын
Nice equipment and Quality Work!
@raiden9250
@raiden9250 18 күн бұрын
The onboard from the into looks fun and violent all at the same time!
@scottbutler2761
@scottbutler2761 21 күн бұрын
Quality of workmanship is amazing
@bradleyduncan8224
@bradleyduncan8224 21 күн бұрын
I have followed you guys for a few years on here. And as someone who does fab work its awesome to see your work all the time. And I hope the build for cleetus brings in tons of new people to profit cjrc even higher! Keep killing the work guys!
@CJRaceCars
@CJRaceCars 21 күн бұрын
Thanks for following 💪🏻
@jonathantillman842
@jonathantillman842 21 күн бұрын
Loved the sound of the new microhone
@bobwarner9952
@bobwarner9952 22 күн бұрын
Sure is looking good, can't wait for the next vid...
@davidjohnson8474
@davidjohnson8474 22 күн бұрын
Geeze it's amazing how the body is mounted!
@Hodge3425
@Hodge3425 22 күн бұрын
I can’t wait to see the finished product! I know I will enjoy watching the build, you guys must be the Best if Cleetus picked you!!!!!!
@carspotting_ike
@carspotting_ike 22 күн бұрын
I swear the level of detail is amazing
@burgboy2459
@burgboy2459 22 күн бұрын
Hell yeah brother!
@mckrackin5324
@mckrackin5324 22 күн бұрын
When Cleetus's channel was first starting out, it was him, James and Cooper. I always thought Cooper was short. When I found out Coop was over 6 feet tall in real life, I thought, just how tall is Cleet? I can imagine stuffing him in something that's not an El Camino can get tricky. Also, titanium. When I was young, my friend was big into 410 Sprint cars. I remember him buying a bolt pack for his car and it was $13,000. That was with bare minimum spares. A lot of the bolts were even hollow. This was in 1991 or 92. I can't imagine what you guys spend on hardware nowadays. Funny thing, this friend is the same height as Cleet. 6'6". Stuffing him in a Sprint car was tough. Lots of custom stuff.
@brandosti8809
@brandosti8809 22 күн бұрын
James came a bit later. It was basically just Cleet and Coop. He bought Leroy and worked alot with Fasterproms, which is where George came from
@mckrackin5324
@mckrackin5324 22 күн бұрын
@@brandosti8809 Yeah, I know. It all happened fast back then though. I subscribed for the turbo whistles in the C7 exhaust btw. lol
@54raceman
@54raceman 22 күн бұрын
Damn am i glad that most series finally outlawed the drilled out bolts they were a pain to keep a eye on making sure they didn’t crack especially the titanium ones they were damn near hit a good rut or make any type of contact and you just automatically replaced every bolt in that corner of the car
@mckrackin5324
@mckrackin5324 21 күн бұрын
@@54raceman Not to mention that it cost about $2500 to lose a pound. The safety concerns weren't worth the tiny gains (or losses).
@YOLO891
@YOLO891 21 күн бұрын
Sprint cars and late models are where its at. I live in PA very close to many of the great tracks in this state.
@garrybaugher8617
@garrybaugher8617 22 күн бұрын
I love the raw videos. Watched every minute
@CJRaceCars
@CJRaceCars 22 күн бұрын
💪🏻
@dakazon2249
@dakazon2249 22 күн бұрын
So glad cleetus is working with yall on this!!! New to your channel and im loving the vids
@CJRaceCars
@CJRaceCars 21 күн бұрын
Thanks for coming to the channel!
@dylanwest4335
@dylanwest4335 21 күн бұрын
It’s amazing seeing all these new people because of the Cleet but the og among us know you’ve been building these insane chassis for a while and this is just another on the long list of (soon to) win cars.
@Humborg1
@Humborg1 22 күн бұрын
Great looking work, gentleman. Hell ya Brother.
@CJRaceCars
@CJRaceCars 22 күн бұрын
Thank you 🙏🏻💪🏻
@shawngansert1973
@shawngansert1973 21 күн бұрын
Hell yeah!!!! I can't wait to see it done.
@JakeobLamping-epici4z1
@JakeobLamping-epici4z1 21 күн бұрын
New favorite channel!! I gotta watch more of your videos!
@CJRaceCars
@CJRaceCars 21 күн бұрын
Thanks for following 💪🏻
@deweerd3155
@deweerd3155 22 күн бұрын
Beautiful welds, I am a pressure welder so I am always critical of my own an others welds . These are top notch . So refreshing to see the quality. The rest of the car looks amazing as well. I enjoy your videos,thanks for sharing them 👍👍👍👍😊
@jessecoc6247
@jessecoc6247 22 күн бұрын
No way a welder compliments another mans welds
@michaelwynne4346
@michaelwynne4346 22 күн бұрын
Some of Yall making comments really need to think before you hit send, these guy's didn't start building race Car's last week, do you really think they would build a Car that isn't safe, if they needed Garrett to have his suit and Helmet at that fitting they would have told him, there is another Process for fitting the seat that goes inside the tin seat, its in a bag and they pour a substance in the Bag and he has to sit in it with his suit and Helmet on it forms around him, some of these statements you might think they never did this before, they build some of the safest and nicest Car's in the Country, stop talking like you know more than they do.
@sjv6598
@sjv6598 21 күн бұрын
Right? They’re talking like it’s his first build. He’s the best in the business and cuts no corners nor takes any chances.
@censored1360
@censored1360 21 күн бұрын
Good collab they went from barely 10k views to over 200k with the cleeter crew. Great job team.
@scottbobcat8450
@scottbobcat8450 22 күн бұрын
This video is a great balance of technical really nice race car stuff
@totalyep
@totalyep 22 күн бұрын
The fab quality is amazing.
@jasonblack8639
@jasonblack8639 22 күн бұрын
This is gonna be sweet!!!
@Living_EDventures
@Living_EDventures 22 күн бұрын
Excellent work man
@Nfamus_Kiwi
@Nfamus_Kiwi 22 күн бұрын
I can't wait to see how this thing turns out.
@leesanders8824
@leesanders8824 22 күн бұрын
I can't wait to see it done. I know if Garrett picked you guys to build the car it's gonna be awesome. Subscribed👍
@CJRaceCars
@CJRaceCars 22 күн бұрын
Thanks for the sub.
@gwick358
@gwick358 21 күн бұрын
Man, you guys have all the cool tools.
@Zach-ku6eu
@Zach-ku6eu 21 күн бұрын
As a military veteran with a former three second life expectancy - I love the 'No Nonsense, Straight Forward, Master of Craft' attention to detail! These aspects really come through in the video.
@Zach-ku6eu
@Zach-ku6eu 21 күн бұрын
Before anyone asks. Frontline Demolitions etcetera. These guys know what they make could get someone killed in three seconds. They're serious. Just who you'd trust with yer life.
@BenjySparky
@BenjySparky 22 күн бұрын
CJR,y'all rock! Peace
@RingTuned
@RingTuned 22 күн бұрын
I've been following for a long time but this is the most update I've ever seen on a car keep it up
@CJRaceCars
@CJRaceCars 21 күн бұрын
Thanks for following 💪🏻
@Vindoublediesel
@Vindoublediesel 22 күн бұрын
Loving the content so far guys good to see the creativity that goes into racing, Came here from cleet you earned your self a subscriber!
@CJRaceCars
@CJRaceCars 21 күн бұрын
Thanks for the sub.
@JustinSwanstrom69
@JustinSwanstrom69 22 күн бұрын
i like it, looks good! cant wait to see it done
@Peg_Leg9n
@Peg_Leg9n 22 күн бұрын
Kinda shocked that you didn’t give him 💩 about it taking too long 😂
@ihax4uv179
@ihax4uv179 21 күн бұрын
can’t wait to see the engine and turbo setup
@daboenterprize8265
@daboenterprize8265 19 күн бұрын
Definitely going to be cool
@Rebelx251
@Rebelx251 21 күн бұрын
This is so badass. Thanks for the update 🇺🇸💚🏁
@CJRaceCars
@CJRaceCars 21 күн бұрын
Thanks for following along.
@lwilliam22
@lwilliam22 22 күн бұрын
Glad you showed the body mounts. That was one of my first questions. Next I’m curious how the floor will mess with the body. I’ve always wondered how sealed up these were. Thanks
@Jvcomet
@Jvcomet 22 күн бұрын
Looking good guys. ❤️
Cleetus McFarlands “Eagle" gets more tubes! How much POWER???
14:42
How many hours to build "Eagle" and how much do these cars cost???
9:48
СҰЛТАН СҮЛЕЙМАНДАР | bayGUYS
24:46
bayGUYS
Рет қаралды 844 М.
Китайка и Пчелка 4 серия😂😆
00:19
KITAYKA
Рет қаралды 3 МЛН
Hot Ball ASMR #asmr #asmrsounds #satisfying #relaxing #satisfyingvideo
00:19
Oddly Satisfying
Рет қаралды 24 МЛН
MOM TURNED THE NOODLES PINK😱
00:31
JULI_PROETO
Рет қаралды 27 МЛН
I Learned How To Drop-Forge Titanium.
17:53
Alec Steele
Рет қаралды 633 М.
EXPERTS ACTUALLY SAVED Rick Harrison From Losing Everything
18:18
Trend Set
Рет қаралды 1,8 МЛН
Levrone Race Car “REHAB” #42
6:20
Levrone Racing
Рет қаралды 6 М.
Why you Should NEVER Buy an Orange County Chopper
22:23
Bikes and Beards
Рет қаралды 5 МЛН
Andrew Santino vs. Hally Leadbetter | On The Tee | Golf Digest
23:59
I made a precision gearbox - with NO GEARS.
30:09
Not An Engineer
Рет қаралды 1,2 МЛН
The REAL COST of Titanium!!!
12:52
CJ Race Cars
Рет қаралды 136 М.
So... We Bought an Airport
23:21
Cleetus McFarland
Рет қаралды 1,9 МЛН
ЧТО УВИДЕЛИ ПРИ ВСКРЫТИИ ДВС на Старой Ауди А6 #Донцовы
1:00
Донцовы Гаражные Дела
Рет қаралды 979 М.
Universal Car Sun Shade Umbrella Cover | Outdoor Car Cover #shorts
0:15
Emergency Tire Repair: Fixing a Flat Tire in Minutes
0:26
D Collection
Рет қаралды 26 МЛН
Почему в ДРАГ РЕЙСИНГЕ морщатся ШИНЫ?
0:26
ЛАЙФСТОРИ
Рет қаралды 730 М.