*CAN WE SAVE THIS 2018 CRF450R?!?* | BLOWN ENGINE!

Instagram djs_garageyt

[@dannyherbert67]

Both those radiators are pretty bent, that bike was ridden hard. You should re-grease all the bearings and change the oil in the forks and shocks

[@Satans_spot]

i just subscribed today but have been watching videos for a lil bit. ik alot of people would disagree with me but one day in a video could you tell us how you started in the hustle

[@dustin9035]

Wow, I didn't know the 2018's came with curved radiators. That's sweet!

[@DJsGarage]

OEM!

[@MatthewG_208]

You should really spend the time trying to bend those radiators back. Put them on a table or the floor and with a block of wood tap then back plumb. They are soft aluminum and makes it an easy job👍👍

[@colemurphy6048]

If you try and bend them back they could bust open

[@shawnmoore5621]

Just replace them.

[@colemurphy6048]

@@shawnmoore5621 exactly

[@lukatomas8389]

Bro that's dumb see so many people crack them when they do that just spend the money to buy new ones or just run those

[@charlesswiger2260]

Great bike build man loved it 👍

[@NOTTApro142]

That bike has seen better days. But thats the life of a motocross bike.

[@Hudson12339]

I love this video upload schedule

[@ianthompson9653]

I think we all do 😁

[@hatedcrf2303]

loved the video and cant wait for the next one

[@ianthompson9653]

“13 hour bike” … yup

[@DJsGarage]

I agree

[@DanielLopez-fs1xj]

I bet it was a beginners bike didn’t know how it worked didn’t use clutch right and probably redlined it alot

[@cheto2952]

Boss A quick look at those radiators. They need replaced bent to hell and back.

[@aidenc4879]

Yo bro I’d love to get started doing what you do your a big inspiration to me. I was just wondering how you find you bikes, like where do you look and on what sites? Thanks bro

[@ktmshop]

you should wash that engine properly before mechanical works, when You assembling new piston dust from that dirty water hose easily goes in to the crankcase.

[@gabbysantana24]

It would be cool if u did a build on a cr500 or kx500

[@DJsGarage]

Trying to find one!

[@braysonriggen5514]

Hard to find

[@DanielLopez-fs1xj]

@@DJsGarage there is 3cr500’s in southern colorado one runs ones a parts bike one is mint but needs a rebuild

[@MartinRodriguez-sy5dx]

Nice video bro have an 19! Deff helped I’d like if you’d mention torque specs

[@fatsandy2166]

rockymoutain has a place in ky to not just utah

[@loopeyshooter503]

Did you ckeck the ring gap? Forged pistons require more clearance than OEM.

[@yzinger9878]

when selling stuff do you close the garage so they dont know you have other toys?

[@DJsGarage]

I ussually meet them at a local gas station

[@jonthelamb4549]

I just sold my bike a month or so ago and now I want another lol shoulda just kept it

[@johnberry2877]

Yep ! They are NOT getting easy to find and the prices just keep going up and up 🔥🔥

[@jonthelamb4549]

@@johnberry2877 I’ve found it pretty easy to find a decent bike around for a good price. I think blown up ones cost more and are harder to find becuase people want projects 😂

[@TheHemiphil81]

This is the perfect 450 to do a 450x build on it..

[@763GanderGuys]

I know your a bike guy, but I wanna see a sport quad like a Raptor 700r, Yfz450r, Trx450r, Trx400ex, Banshee??

[@masonwells8025]

Aluminum brightner the fwak out of the bike

[@brockpeck7073]

Thought the 19's came with black rims. Aftermarket rims?

[@demitriblyashuk4941]

U deserve more subs

[@derekconnatser54]

Good job bro

[@justintaylor9858]

Did you put actual oil on the clutch side

[@Keyssony]

It’s Lit 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥 Bro

[@Nick-fm9ux]

We're you using any torque specifications?

[@laceygreen8087]

Hey I got a 2019 crf450r and I was curious how much will it take to tear down the engine and is it hard to do.

[@shotgunz1248]

All these new strokes like timing chains and valves pistons some even like to eat the head up where cams lay lol Bike should clean up good

[@Henryve33s]

What’s good cuh

[@shotgunz1248]

Get a Suzuki Rm125 07 the last one when they done last update on the motors

[@DJsGarage]

I want one

[@shotgunz1248]

@@DJsGarage I have a 07 cr125r last year and I will not sale it I want a rm also just can’t find one

[@B19902133]

Where are you in SC? I moved down here few months ago. Outside of Charleston

[@DJsGarage]

Upstate

[@Rachwal.Productions]

those radiators make me cringe

[@DJsGarage]

Same haha

[@gahvin3990]

If you weren’t so far from me I’d buy it from u😂 but I got a 2012 rmz250 that has the same ticking noise this did you think I should do the timing chain or what do you you think it is on a rmz250 😂🙏🏼🙏🏼 all the rmz250s you had didn’t make the noice mine does😒😂

[@bradlycriswell1990]

cant believe how clapped out that bike was being as new as it is. Whoever owned it, gave two fucks about it.

[@user-nw7kf6nl2y]

great content as always

[@unidentifiable6152]

Is it just me or are half the dirtbike sim the world in South Carolina

[@DJsGarage]

Uhhhhhhhh idk

[@guadalupepulido2978]

Like your video question how do you advertise your bike for sale

[@DJsGarage]

Facebook

[@nick_3771]

Support RUMBLE!

[@zexymf5440]

how do we buy these?

[@augieh6146]

Holy fuck that bike was used look at the rads

[@MrNz96]

How do you know which piston size to put in the bike?

[@DJsGarage]

Dial caliper

[@DoorTap]

man I dont know how so many people in your area treat their bikes so bad lmao, I just got my 2022 crf450 and planning on making it last 4-5 years, have no idea how those people clap out new bikes so fast or wash them at all lmao have yet to seen a clean bike when you pick them up

[@DJsGarage]

My 2021 yz125 was pretty clapped out too😹😹

[@DoorTap]

@@DJsGarage they just dont care apparently lmao

[@Hudson12339]

How much did you get/sell the rzr for?

[@DJsGarage]

Paid 5 sold for 7.5

[@meriadhaliti]

Dj Garage Why Cr 125 1993 keep scraching My piston I ride only 3 Time and it blow up it blow up 2 brand new piston only 2 hours in it so can you help me fix the problem

[@ste7590]

U probably need new cylinder or crankshaft

[@RileyMcElwain]

You may have put the rings in the wrong way or your pistons may be the wrong size or your cylinder is bad causing it to blow up

[@highlightzilla9581]

Cranks probably bent

[@DJsGarage]

Could be big bore cylinder with stock power valves?

[@meriadhaliti]

@@DJsGarage Cylinder is stock size the bike is all servise with Wosner The cylinder is brand new no scraching and the cranks is new is all service top and

[@low-key-vibing4979]

Would you want to buy my 2016 Yamaha yz 250F it’s seized and clapped from a wreck I got in (3,000)

[@DJsGarage]

Maybe. Where you located

[@low-key-vibing4979]

@@DJsGarage Washington I was wondering if you wanted to cause I have to go over their to a friends anyway

[@Ucrane346]

How much

[@DJsGarage]

5k 💰

[@BMBradyy]

@@DJsGarage I’d give you 4750 is it titled ?

[@jex8046]

RM125 :):);)

[@tiana5271]

I found a 2006 crf450 for only $2000

[@chrisanderson4748]

Sell me this bike!! Mine got stolen, from Fayetteville

[@johnberry2877]

I hope the scumbag who stole it gets stomped by the bike !! Worthless dirt bags won’t work for their stuff 🤬🤬🤬🤬! My buddy got his stolen right out of back of his truck. The rear wheel was chained to the swing arm and they literally dragged it and carried it for miles before it was trucked away! However, he did put his birth month and year on the number plates. Well , he put out a add on Craig’s list and the ass hat who stole it rode it around before removing the numbers and he was turned in by an old dirt biker down his road ! Thankfully he got his bike back within a couple days and the perp was arrested. It always a good idea to put numbers on your plates regardless if you race or not !

[@weekendwarrior6285]

Sealant job on the cam cover would be enough to put me off buying the bike... sorry 😆

[@DJsGarage]

It all peels off…