Can you AWD Swap a Jetta? | Owner Spotlight

[@termsofuniverse7251]

These should have come off the dealer floor with an AWD option. Its honestly one of the best looking sedan's VW has done.

[@bigzkiller123]

I always tell myself that VW will never top the mk6 and the mk6.5 body style

[@thefallen924]

@Aj Ernst Jetta R Line isnt awd, and its lower spec than the GLI lol

[@jared4670]

Couldn't agree more. Dq500 plus vr6 3.2 and haldex.

[@seabass3104]

Get an Audi.

[@Chris-dy1cb]

the moment it gets AWD it becomes an AUDI lol

[@sebastiengeerens5158]

You built what Volkswagen should have built years ago. Great job Sir. 😍

[@rodneyfalls1869]

SERIOUSLY. It pisses me off that vw didn’t do this

[@fastboatster]

They didn’t build it because it would steal the sales from the A3.

[@sohcwillie]

@@fastboatster Audi shouldn’t offer a FWD version of the A3 then

[@fastboatster]

@@sohcwillie it does because a bunch of people just want an Audi, and fwd A3 is going to be the cheapest Audi they can buy while still providing better margins for VW Audi Group than comparable VW branded vehicle

[@otavior1630]

@@fastboatster yeah, its sad but they would either have to do that or offer a much much much worse engine in true big brand fashion

[@bigzkiller123]

As a former GLI owner it’s true… even a basic stage 1 tune rendered first and second gear useless

[@s00p3rman]

Agree. I just have a neuspeed power module and grip is basically gone in 1st. I haven't done anything else (tune or mod) because I'm convinced that I'll just make it burn through tires faster. I'm just gonna get a golf r eventually.

[@zackzundel1047]

sure off a launch it will spin but where it really shines is when your in 3d, so if your doing a roll race or something the gli is tough to beat@@s00p3rman

[@nicholasalanis3449]

And goodbye to our tires 😅

[@alextorkelson]

Have you tried using summer tires instead though?

[@shaneinfinity4597]

My last car was a Gen3 GLI and when he talks about stage 3 tuning being an issue he aint kidding. Car is more then a PITA to find parts for and the fact this guy AWD swapped this thing blows my mind. Amazing build

[@DevineDigital]

Haha, its fun when you figure it all out and it comes together, side note some tuning is coming around. Thankfully Reflect Tuning supports us, and there is soon going to an an option for open source tuning!

[@shaneinfinity4597]

@@DevineDigital well thats good to hear. I sold my Gen3 a couple of months ago as it required extra fueling to get the tune from reflect but I am glad to see people are still working with the platform for you guys

[@MarcosJDuran]

Incredible build. If I had the patience, money, and another vehicle, I’d love to AWD/2.0T/Big Turbo my Mk6.5 Jetta. Happy to see how much joy this brings 🙌🙌

[@dominickcaruso]

Another 14’ GLI owner here. Always wanted to do this and dual exhaust. So happy to see someone go through with this. So cool man!

[@PrzFinest21x]

Yessss. Glad this thing has finally gotten some spotlight! Can’t wait to see the power part of this build unfold, Great job Charles 🙏🏼

[@DrivenByChris]

Full send brother

[@DrivenByChris]

Clearly yes. Full send! Imagine a fully built big turbo awd jetta. That's scary

[@kerbsy7838]

Cool yes, scary not even a little bit. would be equivalent to a golf r but weighs more. I would say fully built big turbo fwd would be scariest cause torque steer

[@DrivenByChris]

@@kerbsy7838 big turbo fully built doesn’t equal golf r. Plus u do realize that this car doesn’t weigh more than a golf R and that it operates mostly in fwd mode but when it’s fully built , the awd would allow it to move

[@kerbsy7838]

@@DrivenByChris you didn’t account for all the added weight due to halidex drive shaft exc… and your right it makes less power than a gold r on a more planted wheel base due to its being longer then the golf so you saying it’s scary is halarious the added weight would also bring the hp numbers down and i was comparing big turbo golf r to big turbo jetta not a stock golf r

[@kerbsy7838]

@@DrivenByChris and halidex send power to rear when front slips so it really wouldn’t be the same in terms of you saying it “fwd” making it much more planted and stable over a fwd version

[@DrivenByChris]

@@kerbsy7838 i see what you are trying to say but it is not accurate. A fully built awd Jetta will be scary. It will weigh approximately the same as the Golf R and have the same power potential. And yes , like I already said, the car operates in fwd most of the time so a fully built car will move move out because the rear end will help. You just said what I did in terms of the halidex just differently.

[@burb17]

This is a sweet build. Props to this guy for doing so much of this research and work to figure it out. Also really like the small details he went over like the console and shifter.

[@DevineDigital]

Thank you for the kind words, it was a fun build and still in progress for more fun bits

[@717StreetMedia]

AHHHHH projectgen3 gang thats whats up!!!

[@atascha1914]

The sheer amount of detail that was put in this build is unbelievable. I love everything he did. This is a show winner in every aspect. Perfectly purpose built with maximum drivability in mind. Cheers

[@DevineDigital]

I appreciate the kind words, she is still a work in progress for sure, but getting there.

[@conquerirlemonde8432]

i remember when they started posting about the project in the gli groups... the triumph video was awesome watching all wheels spin on the jack stands. it was so cool

[@DevineDigital]

So glad to see many of you all here enjoying the video.

[@marior.4145]

Awesome video, awesome car. Mk6 is a good looking car and this guy just made it 100x better. Great job!

[@VeeLazer]

if i could like this video twice i would. that car is super cool and projects like this are really why i like VWs

[@Kidd_Clutch]

Awesome work and display of passion man! Congrats!

[@DevineDigital]

You the best!

[@_chan.burn.21_]

The way this man has modded his GLI is exactly what I am aspiring to with my 2015 Beetle 1.8T. I don't want something that's AWD or makes 500WHP, but I definitely want to give it a tune, other go-fast bits, and some suspension/brake work to make it a more fun daily driver... all while keeping the more OEM+ approach.

[@DevineDigital]

Chase your dreams! Build what you want, have fun doing it, thats what this is all about!

[@onelowvdub]

Use the Audi A3 parts . No more messing around , everything works driveshaft and subframe

[@DevineDigital]

I’m not a fan of the looks of the A3 interior or exterior. You are right it would have been easier, not nearly as fun though.

[@onelowvdub]

@@DevineDigital no use the Audi A3 parts .rear haldex and trans etc

[@onelowvdub]

@@DevineDigital even the driveshaft is perfect length

[@DevineDigital]

@@onelowvduboh I see what you are saying. It was really hard to find parts at the time. Now I see posts all over the place for good prices

[@jasonpalacios1523]

I’m completely confused as to why he didn’t. I feel like this guy just wanted to do the extra work.

[@JaredSVX]

That generation of GLI is my favorite...Looks sweet!

[@DevineDigital]

Thank you, this is my favorite generation as well.

[@euroberto85]

I really like this build. It's awesome. If it makes the power he wants the GLI will be such a sleeper.

[@DevineDigital]

Thank you! It has caught quite a few people off guard.

[@euroberto85]

@@DevineDigital if you want another project i have a clapped out MK4 GTI i would even trade for that GLI, i need a 4 door for the family 🤣🤣

[@DevineDigital]

@@euroberto85 I’ve had 3 of those too! Haha

[@kirilkaoneone]

amazing project! I also have an mk6 4motion GLI built in Ukraine 😁 Haldex 5 is working just fine, but with haldex ecu unit from non mqb vehicles (tiguan). transmission can be swapped from golf alltrack, though dsg software should be tuned because of slightly different ratio. Hope big turbo will come up soon If the car won't be blown by russian missile 😱😁

[@DevineDigital]

I hope you and your family are safe! Also thats awesome news to hear about the gen 5, I’d love to know about it when things get better over there!

[@DrivenByChris]

God bless

[@csmakio]

stay safe my dude

[@vitaliigrynchuk1774]

Glory to Ukraine!!!

[@kilovwdude6457]

Keep safe!

[@gerjanrubens2698]

This car first came out in 2011. It was ahead of his time beautiful car. Mine has 247000km chip 40hp more and still drives good. Little problems with clutch, mirror right side and dashboard make some ratle noise when it cold outside. But overal pulls, drives, brakes very good with my kw suspension and bbs Lemans Dunlop sports it Handels great 👍

[@projectlolmqb8649]

Great way to show an awesome build! Charlie is the most ocd person I’ve ever met and it shows in his build quality! Much love brother!

[@MaxiimTribe]

I still had my MK6 when he started the swap iirc. You're next ay?

[@projectlolmqb8649]

@@MaxiimTribe my goals are a little different. AWD may come in the near future but currently shipping a motor out to BBT for head work and assembly. Just got a new turbo for the built motor setup. Gonna build the trans when I get back from deployment and throw everything back together. Hoping to reset the Gen3 WR in my manual before going AWD.

[@MaxiimTribe]

@@projectlolmqb8649 thats cool im sure its gonna rip, i couldnt hang with you cool kids and just went mk7...gonna go into an A3 for awd next

[@modelbehavior3252]

I bought my 2016 GLI new and have waited for someone to pull off this change, great work!!!

[@nkawtg4]

I sold a GLI that looked just like this one because no matter how much power you have, it will always be a FWD. Welp, I was wrong apparently. This car is amazing and I would seriously consider purchasing if it were ever for sale. I doubt the owner would ever part with it, but if you do...let me know! DIBS! Until that day, my S5 will be fine lol. Props to you, man. This is just absolutely amazing. I love it.

[@DevineDigital]

Hey I appreciate the kind words! You are correct, the only way this is leaving my possession is if someone hands me $40K, yes $40k because you would have to be pretty darn hard headed to buy it for that price, haha.

[@crisantogarcia6646]

This is amazing! I was thinking about getting a GLI but I’m tired of FWD. I would get this off the lot! Looks beautiful.

[@brianwilhelm9464]

That gray jetta in the background is beautiful, i miss my old wolfsburg

[@haydnholder7090]

Mines Stage 2 ultronic with vw racing intake, audi r8 coil packs, stage 2 clutch, esc tuning diverter valve relocation kit, esc tuning blow off kit, and a few more things making 322hp with more to go stock turbo! Their very capable cars its the 2wd holding it back for sure that and finding a tuner aswell

[@DahakaCL]

How to not love that guy, he's so happy with his project and telling us his story with the car.

[@MiIlerGD]

Parts lost on this build please. Especially the rear AC duct console. Aussom job there is a guy in Canada that does the AWD swaps all the time and he has it down to a science. The other thing I wanted to know is how did you Get away from not having to Cut out the rear spair well? Where did you fit the haladex ? Please list a full parts list . As I have the same car and want to do this build.

[@clemsonguy99]

Wow. Super impressed. Great looking ride!

[@chacehahn6556]

OMG this video is exactly what I need!!! I’m planning on awd vr6 swapping my Audi TT, and I’m going to have to adapt the haldex and transmission exactly like this. Thanks algorithm!!

[@DevineDigital]

Yay for the algorithm! Also if you are on Facebook by chance there are some AWD conversion groups that can help too!

[@willianbispo1323]

It wouldn’t be easier get the MK2 TT 3.2 Quattro ?

[@freshofftheplane]

This is awesome. Much respect to the owner.

[@DevineDigital]

Thank you!

[@Innkeepeeer]

Thats the type of dad I wanna be in future. Incredible build sir! nothing but respect.

[@ivanhiliev]

A true Golf nerd, thinking he build the car for his kids :) :D Great work! And it's funny how we in Europe want to have the US bumpers, pars, etc and vice versa. That's what optics are for, each car could be unique when you play with it

[@DevineDigital]

I appreciate you, it’s always for the kids, but sometimes for us too! Haha

[@_Volkhunter_]

Is no one laughing at the Mike's harder lemonade in the car seat cup holders 😂😂😂😂. That's so funny!! That was my laugh for the day. Good build bro!!!

[@johnyboy760]

😂

[@DevineDigital]

Lol, you know not many people seemed to notice it. I thought it was a funny little easter egg.

[@coffelt683]

Its funny the rear AC situation kind of reminds me of the Crown vics. Only the Middle Eastern market vics got rear AC vents mounted to the center console. But fair enough, they need them more than most of us in the US lol.

[@DevineDigital]

Haha very true, those are the fun parts to find. I love finding those challenging to complete projects. It makes you appreciate them more.

[@nubz0rzyou]

Mk4 and mk6 jettas are so damn good looking

[@Scooter_9k]

i've thought about doing something similar to my 2015 Golf Sportwagen TDI and then youtube recommends me this.

[@marcuspatterson2925]

I got one too. The 30th Edition. Apr stage 2 rn ,manual with a bunch of bolt ons. With that big turbo though, I’d look into adding new headers. Im on my way to where you are though. Awesome build!

[@NOTaGLI]

The exhaust manifold is integrated into the block these motors don't use headers the turbo bolts right up to the block.

[@ridiculousness7477]

This will blow the doors off my F30 335. Great job sir

[@DevineDigital]

Thank you!

[@pomnichowski]

Scratching an itch is wonderful

[@GN_Grizz]

Love this build have been following this build for quite some time. Charles is an amazing guy and loves to spread knowledge and take this platform to new heights. So, glad he finally got some screen time on this.

[@BlkSTIG]

FINALLY!!! Amazing build Charlie.

[@DevineDigital]

Thanks Cameron!

[@jamesroan]

Volkswerkes down here in Miami is the truth! The guy won an award for the AWD swap on a white MK6 GLI

[@audikris]

Awesome vid! Super cool owner interview, and gorgeous car! Well done congrats Charles!!

[@gavendelrio9193]

Always wished my white ‘14 edition 30 GLI was awd. Good to see people doing this!

[@nicholasmanning7935]

Mhhhmmmm thinking about doing this. But with my 6 speed. It'll be like an manual s3. But also I need that center console lol

[@andycastellanos68]

Great work! Do you know any mechanics in Southern California (LA area) that you would be able to recommend? I have a 2013 Jetta 2.5 se I’d like to start a project on

[@tristiangordon4838]

Cant wait to someday do this to my 12' gli

[@WolfCommander]

Wish more people with different cars did this. The Mazda 3 _(in Japan and other places)_ come with AWD, however the USA Verizon is *ONLY* FWD (not including the gen4) It is said that the Mz3 AWD uses the same system as the cx3 + the CX5 - and it's wheel base is just about the same. If I had money, I'd do it to mine but I'm broke.

[@deepakkv303]

You can totally buy the current gen Mazda 3 in AWD form in the US... just can't get it in AWD and manual form as it doesn't exist. They look really cool and it's always fun to see them out in the wild.

[@ronburgundy4375]

They also did have dsg golf r's in other parts of the world during the mk6 Gen

[@DevineDigital]

I’m so jealous of that! I wish we had them here in the states too, 5th Gen R32 and then not until 7th Gen.

[@mshilko]

Great looking car. I have a mk7 golf r and this looks better for sure. Super clean. Great job.

[@DevineDigital]

Thank you, 7R’s are pretty awesome too, don’t sell yourself short.

[@briandonovan5434]

Thank you for the console information. I was trying to solve this very conundrum

[@DevineDigital]

If you need anything let me know, it is very very hard to find the parts. Many places say they have it, then write you back and say they cannot get it due to it being a legacy part.

[@HatsuneM1ku01]

I mean technically you can, euro models have a 4 motion option. just have to import the rear part of the chassis and trans/driveshaft tunnel and weld it up in place of the old one and get the rear subframe diffs, transmission etc

[@DevineDigital]

That’s basically what was done, but some of the parts weren’t able to be shipped due to length restrictions that require ridiculous shipping prices. At the end of the day I said if it works and is available here I’ll use it.

[@Wattis161]

father of the year!

[@MK6_GLI]

Did I miss the part where he stated this was an "un-face lifted" MK6? The rear looks 6.5 but the front is of course MK6, however he's moving with the gen 3 ea888.

[@DevineDigital]

2015 is a weird year for the GLI, Facelift butt, and interior except for android auto and parking sensors… then it’s the pre facelift face. If you’re curious on other things I’d be glad to help. Cheers!

[@MK6_GLI]

@@DevineDigital I've watched this video as well as many of your IG posts and I cannot figure out why I was so hyper focused on this detail! Lol I do have a question about your build though - in the video you mentioned the "Passat Haldex dilemma", but I couldn't figure what rear crossmember you found bolts up without cutting the rear pan up. Would you mind sharing your wisdom on this? Thank you sir!

[@DevineDigital]

@@MK6_GLI thanks man! I wound up getting a golf r rear subframe, but a TT and A3 subframe from the same generation works too.

[@MK6_GLI]

@@DevineDigital thank you sir!

[@AraiTech]

@@DevineDigital first of all, you have a nicely built car. i just finished converting my Jetta Mk6 with 1.4tsi EA111 to 2.0tsi EA888 Gen 2 completely rebuilt with forged internals and big turbo setup.. and for the love of all there is no traction.. i wish you could clear some things, i’m planning to go for a similar AWD setup.. but i’m from Malaysia and sourcing parts here are painfully hard and expensive.. so i would really appreciate if you could guide me in the right direction since i don’t want to be burning a hole in my wallet with parts that don’t fit.. 😂 Would parts from the Mk6R direct bolt on? I know the DQ250 and transfer box wouldn’t be an issue, but how about the rear sub-frame, haldex and the rear drive shafts and especially the long shafts? Since the Golf & Jetta Mk6 have different wheelbase.. Jetta Mk6s in this part of the world only comes in 1.4tsi trim, either single (turbo only EA111 or EA211) or twin-charged (supercharged+turbo EA111).. no 2.0tsi @ GLI.. Thank you and really hope you would read this and reply.. Cheers..

[@martingilvray06]

Have you had mounting points tearing off the bell housing or gearbox casing , M1 Ghost.✅✅✅🇬🇧

[@DevineDigital]

I have not, but I have all the brackets to secure the transfer case to the engine as well. Otherwise you would get flex and have that happen.

[@brianinglis2199]

Man the money it must have took

[@pnwcustom]

We're about to start this project on our Big turbo beetle! Thanks for sharing your story!

[@langamtimkulu6846]

nice job.......does he have a build video? and does he have a 5 cylinder or VR6 ENGINE SWAP planned for the future?

[@bbowers825]

You basically built an RS3..... GLI looks mean man, congrats!

[@ronburgundy4375]

Also what you meant to say is you couldn't get traction I have a 750hp ek civic with big fat slicks and still have issues hooking unless I'm on a prepped track it'll blow the tires apart at 70 that said still beat em spinning.

[@DevineDigital]

I love me some big power EK action, it blows my mind how much downforce is needed to get traction. This used to do that, but now it’s much more fun to get thrown back in the seat for the kids and daily driving. Cheers!

[@zkjel125]

Was just talking about this. I wish they made the GLI awd.

[@jonmallard2176]

Any reason why a similar year A3 Quattro or a Tiguan wasn't used for a donor car? It's basically a Jetta anyway.

[@DevineDigital]

Great question, tiguans are very similar but drastically different the US, they have torque converted autos here, an a3 8P AWD is a direct boot on essentially but they are unicorns. The 8V (2015+) are very different in the rear subframe and fuel tank.

[@arthurerby2466]

This might honestly be my dream sleeper

[@sanymerger3483]

Your Volkswagen is so clean and I’m here for it

[@austinstephensparks]

thats awesome i had an a4 b6 i wanted to do a lot of things with but it was becoming a money pit. had to cut my loses maybe ill try again later down the road

[@fgtrhwu2]

I wonder if this will be possible for the 1.4 Jetta with the turbocharger and supercharger

[@DevineDigital]

I’m not to familiar with the 1.4 configuration, but if they make a 1.4 AWD somewhere in the world then it should be possible. Good luck!

[@fgtrhwu2]

@@DevineDigital I don't think that model was for the US market, it was mainly sold in Europe and Asia. 1.4 mk6 Jetta comes with a EA111 1.4 tsi twincharged engine(turbo and supercharged). VW never released a AWD version of it so I'm not too sure about compatibility

[@DevineDigital]

@@fgtrhwu2 good information to know, the best way would be to look at diagrams of similar vehicles for mounting points and such. Thats what a lot of the research is

[@georgiereano6004]

Hello, how are you? I would like to know how much money you put into everything you have already done and where you did it. I have a gli too, thanks

[@georgiereano6004]

I have saved a little money I wanted to know how much I would spend an approximate

[@chillsmith9622]

This car is on bags? Beautiful car, I recently got a 1.4T 5speed Jetta, didn’t know much about Volkswagen, would’ve gotten a GLI but I’m satisfied with my little TSI

[@DevineDigital]

This is on BC coilovers with swift springs

[@jimbo.t7510]

Well done !! Very sick build and super clean , sweet sleeper

[@hellaflushhonda]

Have a 1st gen 2012 GLI so what exactly is needed to get this done?

[@RickGTI2019]

How does VW not hire this guy ? Genius ‼️ Great work, thank. RickGTI….. 🌴

[@whoelsebut4557]

Seems like this is the place to ask a question, i have a 2003 TDI engine will it fit the motor mounts of a 2007 GTI. USA both models

[@DevineDigital]

Honestly they haven’t changed much over the years, best bet would be to double check an aftermarket vender and compare the design, from what I’ve seen the mount and bushing itself changes, but where bolts to the portion of engine side mount is typically the same. Best bet would be to double check shop daps site for photos and see.

[@whoelsebut4557]

@@DevineDigital you sir are a godsend

[@ventodanny]

sounds like golf r is it because of the traction

[@marceloho1984]

Its almost an Audi S4. The solid chassis is there, but the hard thing is get all the parts, mount and get all these things working. Kudus for you.

[@DevineDigital]

Thank you, it was a very fun project, still looking at refining it as well.

[@mikepurvis8824]

"This is what I do for my kids"... uh yeah... that's it :) Well done sir

[@DevineDigital]

Happy wife, happy life. Honestly though it’s a lot of fun getting them involved in the builds and enjoying it!

[@markycupko]

Awesome work m8!

[@alexanderheling2057]

So I want to know how much it would cost to change my front wheel drive Jetta into a all wheel drive.

[@DevineDigital]

Approximately the cost of buying a wrecked R or A3. Prices will vary widely

[@bigblueskybehindtheclouds1874]

Nice build yes the wider track is a pain on the butt I put 04 A6 Front suspension parts on my 01 b5 wagon and that's what I saw as the difference as well but real nice build

[@DevineDigital]

Thank you! Also awesome work, it’s definitely worth the wider track, shes so planted now.

[@mendyWZRD]

Beautiful. Well done 👍🏽

[@Raskeable]

Awesome project! Maybe have a look at parts for Skoda and Seat as well. I know you dont have them in the states but those parts are usually interchangeable.

[@DevineDigital]

Great advice! The original catback exhaust I had on the car was from a Skoda Variant TDI after the swap.

[@Raskeable]

@@DevineDigital I currently drive a skoda superb as well. Similar gear to a Audi S3 or golf mk7 R. However the chassis etc is closer to a passat. Happy to help figure stuff out if needed!

[@oahts5906]

@@Raskeable mk4 Jetta wagon 03 1.8t. stage 1 tuned, it’s fun but finding myself needing to replace the steering rack and other parts. Seems like a ton!

[@Raskeable]

@@oahts5906 drive a Skoda superb myself. But basically just a golf 7r when it comes to parts:)

[@JesusReyes-mi7yv]

well i know what im doing to my gli.. thank you mate

[@410kane]

I don't know if I'm missing something. What rear subframe did he use?

[@DevineDigital]

A golf R rear subframe

[@410kane]

@@DevineDigital ok Thanks. 👍

[@rwsteiner100]

Someone please let this guy know its a good idea to replace the PCV with the cts billet catch can pcv replacement.

[@DevineDigital]

It may be a decent investment if it’s not CTS and if it wasn’t working. My PCV system shows no signs of wear or oil contamination in the inlet. The only way it’s getting replaced is with a true baffle system with atmospheric vent. Cheers!

[@nydrell1969]

"FLOOR IT DADDY"....nuff said.

[@SHWELL11]

NIcely Done, hopefully I can check it oout in person one day. Definitely sounds like a challenge..

[@Jonathan00062]

My dream car, a awd jetta. I've been begging vw to make them all wheel drive. Hopefully soon.

[@fukndrums367]

As long as Audi exists I don’t think we will be getting an Awd Jetta here in America

[@Jonathan00062]

@@fukndrums367 yeah. You have a point.

[@ElChapoDel8]

what car is that fuel tank from?

[@DevineDigital]

This one specifically is a MK5 R32.

[@rexjames4072]

I wonder of this awd trans system is compatable with gen1 gli?

[@donovahnnduhaney7608]

Rim n tire setup if you don’t mind?

[@ironreed2654]

This is cool "IF" he did not spend more than a Golf R to build it; I'd also like to know if he had the mechanical lsd when he installed the big turbo and had such wheel spin issues, I'm not arguing that point but would like to know...I've been considering a GLI and it could save me over building.

[@berube361]

Of course he spent way more on this that what a golf r would cost lol.

[@DevineDigital]

@@berube361 lol you are wrong, I spent about 15k less than a Golf R.

[@DevineDigital]

I did splurge on a Wavetrac LSD as well when building the car, it’s an absolute beast to drive and on rails.

[@danielzuniga88]

Impressive, some one do this on a MK7 GLI

[@UnitedShredNation]

I have a B7 Passat 2014, can that be converted to AWD?

[@Treizez34]

Swap a 6.5 front clip n that thing and it’ll be perfect! Awesome job making what vw should have did years ago for the jetta

[@DevineDigital]

I’ve thought about it, but id probably splice the upper 6 with the lower 6.5. May still do that in the future. The car is far from done overall.

[@Treizez34]

@@DevineDigital they never are lol… Kudos man.

[@DevineDigital]

@@Treizez34 thats the truth!

[@madarauchiha1218]

I wonder how different the Mk7 era GLI would be. built on the MQB chassis I wonder if it'd be easier to harder to do.

[@DevineDigital]

If you can get past component protection, most A3 parts would be a direct fit.

[@SlowBoiGang]

I wonder that too. AWD would be nice

[@etrom1]

This guy has the car I dream I can make mine into someday

[@decaysaypluhtheyst]

I have an mk6 2.5 sel and i don't even want to be gnarly. I just hate fwd and really wish i had an AWD and a normal turbo.

[@gregoryspencer6196]

I would like to do a All wheel on my GTI MK6, What kind of code and wire would you think ?

[@Juan_More_Mile]

what's the part number for that center console?

[@DevineDigital]

Its sadly been discontinued, 5c7863241n82v if you can find it

[@ventodanny]

can i all wheel drive my golf 7.5 gti