Can You Use CAR Subwoofers In A Home Theater?

[@ricobonifacio1095]

Thank you for being respectful to your neighbors by keeping the sound down at that time. I have two 12s and I never use them past 8 o'clock because I know how it is to be kept awake by rude neighbors.

[@Kpaceguy]

@ricobonifacio1095 in the 5 yrs i lived there i only had to be asked to turn it down once. Got along well with my neighbors

[@TOONMAN200]

Thank you I have a 30 year old passive Polk audio subwoofer, it's finally given up and I need a replacement. Before your video I was thinking of an car audio subwoofer, but I wasn't sure. You did something on your video a lot of people don't do, you explain everything and you're very thorough, every question I had was answered with your video thanks again I would recommend your video for people that are doing the same thing that I'm doing. A little side note, I do have a Boston Acoustics subwoofer driver amplifier which I'm very proud of.

[@Kpaceguy]

Thank you buddy I appreciate it

[@TOONMAN200]

By the time I got your reply, I went to a high end audio store. Got a JL AUDIO 10W6v3-D4, installed it in my enclosure. Started up the home theater, selected a movie from our HBO MAX. I was blowed away, even my wife was impressed. This speaker is very expensive, of course I use only the best equipment, the only way to go.

[@relaxingparadise2795]

I personally use car speakers for home theater mainly for watching movies or TV series and I must say it sounds amazing way better than the stuff we had

[@Kpaceguy]

More power for less money

[@jasonschannel1315]

So a car sub magnet doesn't interfere with the tv.

[@duckilythelovely3040]

@@jasonschannel1315 no, aslong as it's not super close.

[@jasonschannel1315]

@@duckilythelovely3040 Gotcha!

[@francoisdutoit4197]

I use an old school 12'' Pioneer sub , powered by a small car amp, and honestly , it slams real good!! Everything inside the house rattles on 30% volume on the NAD amp , which in turn drives 2 old school Pioneer bookshelf speakers. Absolutely superb!!! Thanks for this video.

[@Kpaceguy]

Thanks for watching

[@dewaynebryant1483]

How do you get power to the car amp in the house?

[@tylerstrope805]

​@Dewayne Bryant buy a 12 v converter

[@MagicTK-]

Years ago, I had in my Honda CRX, a Cerwin Vega Stroker 18 and an Earthquake 200DHC 2000wrms amp. Now the Stroker 18D4 is in the home theater, with two 300wrms BASH amps in a 9.76cuft external box tuned to 23Hz. It hits deep and blends well with my Paradigm Studio 100 v3 towers. I love it! Eventually I will add a couple more 18" subs for fun.

[@lloydhudson9032]

Damn, I'm sure that 18 was thumping in that CRX.

[@MagicTK-]

@@lloydhudson9032 yes it was. My highest SPL was 148.3dB. Rattle your eyes! And it could handle playing high dB all day long without breaking a sweat.

[@lloydhudson9032]

@@MagicTK- Nice!

[@stevieG2015]

Got started using car audio in the HT nearly 25 years ago. First was converting a Jensen 12" HTsub and replaced the driver with an Alpine Type S. Worked pretty well but ports were very small on the enclosure and chuffed pretty hard so a friend built me a bandpass enclosure for it and we swapped out the Jensen amp and it served me well for many years. The main project after that was dual Audiomobile Evo-R 12's in a 7.5 cuft enclosure tuned to 25hz with both ports open and 18 with one closed. Had that hooked up to a Mackie M-1400i for over a decade. Amp finally gave way and I went on a different path, but still have the Audiomobiles in case I want to let my youthful side out again haha

[@ssjdavid]

Brooo hatches sound insane 😢 makes me miss my EG hatch. I swear I had the most simple system in that car but it was the best sounding car I’ve done yet. Just a W6 and some JBL speakers on a kenwood excelon

[@benjimenfranklin7650]

Damn Skippy you can have a car subwoofer in the house. You can even have a complete car system in your home connected to your television and stereo. It's really nice to have too . Especially when watching transformers 😊.

[@nickilee95]

I want something for heavy bass rap music. Cars drive by all the damn time and rattle my windows and I want to have that kinda bass in my house soooo damn bad!!!! Just NO idea wtf Im doin when it comes to hooking things up.

[@Kpaceguy]

There are home theater subs that have output like a car sub but cost a whole lot more. You can get a crown amplifier or berhinger amplifier that can handle 2 ohms and power a car sub with it and avoid having to figure out complicated wiring. That's what I have going on in my home theater

[@bringmeyourweak]

Ah yes, I use a level 4 DC audio 12 in a transmission line enclosure for my home theater. It's in a rather large basement room and it fills it very well. I can't go back now. Great video K.

[@Kpaceguy]

Thanks!

[@AUDIOED73]

Great 👍🏼 Video- I’m using a 15” old school kicker Solobaric sub and it makes my 7.2.4 system Really get them lowers notes!!! Also installed couple of Bass Shakers underneath my theater seats 💺 and loving it!!!

[@Jamez84]

Subwoofer is a subwoofer car or home they all work the same. Your box will dictate how that subwoofer sounds more than anything. Larger boxes increase the efficiency of the sub and large woofers are generally louder than a Sub with the same motor but a smaller cone area. The enclosure acts as part of the subwoofers suspension, you get too small and it will have trouble moving because of the pressure. You get too big and the subwoofer will lose power handling capability and will act like it is in an open air environment. Generally speaking though car subwoofers are much louder, boasting a greater woofer excursion and larger motor and voicecoil allowing for higher power handling.

[@remisouth5695]

the biggest difference between car/hometheater subs: 1-hometheater subs are usually more efficient than car subs 2- home theater subs usually are capable of playing way lower than car subs...car subs usually are optimized for 40-60hz where as hometheater is optimized for 15-30hz

[@remisouth5695]

​@@CajunReaper95 I'm talking subwoofers...enclosure wasn't in the equation...car subs usually have an fs of around 30-40hz...were as home theater subs usually have an fs of 25hz and lower (i have a dayton audio classic 15 with a fs of 17hz) ...not saying car subs can't play down to those extreme low freq...they're just not designed to do so...hometheater subs would be way more efficient playing 30hz and under than car subs...the dayton audio 15s i have has a sensitive rating of 83db at 30 hz...most cars subs can't make that claim.

[@addiskinfe3226]

I thought you would show us how to connect and wiring a car subwoofer at home But you lectured on theory much

[@Kpaceguy]

Nobody Does that anymore... it's more than pointless

[@Jamez84]

@@remisouth5695 Most car audio subs have FS in the 30s and are optimized for sound between 20- 40hz. The only subs optimized for 40-60hz in car audio are the 6.5 and 8 inch subwoofers. Anything with actual cone are has too much mass to be have an FS as high as you stated. Look up Mr 18hz, this guy has a SPL car hitting SPL numbers in the 160s at 18hz. Home theatre systems don't get anywhere near that loud. Why? This is because their suspensions are super soft when compared to SPL car audio subs. This is because their Xmax is often half of SPL car audio subs. NOT ALL car subs are for SPL. If you look at SQ car audio subs you will find they usually play from 18hz and have a fs in the 20s with a higher speaker efficiency. Why? This is because they use often smaller parts with LESS moving mass than SPL subwoofers and softer suspensions that allow the speaker to hit the really lower notes better but with No authority in comparison. All of these are at the sacrifice of SPL. No matter what you do though YOUR BOX will have more to say about how a subwoofer sounds than the subwoofer itself. I've seen cheap subs sound amazing in custom boxes and I've seen expensive subs sound awful until they are placed in the right box. No matter what you box is going to control the sound, large sealed boxes will hit lower but at much less SPL, while a ported box will be louder, then you have 4th and 6th order bandpass boxes that some call one note wonders. Everything depends on box tuning and size. Larger box = more efficient, more volume, less power handling Smaller box = better punch notes, better mid bass, greater power handling. Ported box = More efficient, more volume, but only at tuning frequency, requires a filter for 20hz and below Sealed box = Less efficient, flatter sound curve, more accurate sound

[@basscaddy1449]

I have been secretly waiting on you too make this video!! Thanks

[@Kpaceguy]

No prob

[@TheREALJosephTurner]

Lots of commenters covered the electrical and speaker theory side of things, so I'll add one more thing that don't matter a whole lot for home theater use: the environment that the speakers are designed for. A lot of home speakers (including subs) are designed with the expectation that they will be used in an environment with a pretty consistent temperature and humidity range. This is why there's a market for surround replacement and rebuild kits for popular vintage speakers- because more often than not, old speakers get kicked out into storage or used in a garage where the temperature and humidity is not always constant. Automotive speaker design, on the other hand, KNOW and EXPECT that there will ALWAYS be semi-extreme temperature and humidity changes- a lot of which are rapid (such as getting into your car in the winter and cranking the heat up). So, dollar for dollar, the average automotive speaker is going to be built using better materials to combat temperature and humidity changes. It's probably not something you can hear when using an automotive speaker indoors, but it will be something you will eventually hear using most indoor speakers in an automotive environment. This is precisely why I went through so many speakers in my "heated only when I'm out there" garage until I decided to switch to using aftermarket automotive speakers in the garage- then it was problem solved!

[@jankof76]

I use to run crown amplifiers in my home atmos theater setup, then I switched to car audio amps and never looked back, car audio amps are way more impactful in home theater.

[@pavanchirmade]

What's the best way to power car amps at home?

[@c.fodder2444]

Sme question. how are you powering them?

[@kepharolang1984]

​@@pavanchirmadeserver PSU,very common in my country

[@jaydenlampman904]

I'm thinking about purchasing a new house in Tampa Florida and this video explains exactly what I would do if I had a home cinema system

[@petedetraglia4776]

I pulled a 200 watt class AB plate amp out of a Klipsch ProMedia 2.1 THX computer speaker setup, built my own seal box (1.25 cubic ft) with an Alpine W12S4 12-inch Single 4 Ohm Subwoofer, full braced internally, stuffed bottom of the box with poly fill, hooked it back up to the computer with the Klipsch satellite computer speaks that have a bass pre - amp dial and it hits down to 25hz but really takes off SPL wise at 30hz...Crossover rolls it off at 100hz where the satellite speakers pick up the mid/upper ranges. It the most musical sub with home theater like impact I've ever heard in the computer arena. I have a 43 inch Sony 4k Bravia TV as my monitor and a Blu-Ray player in my computer...Great video...YES to you can run car subwoofer in your home easily and pretty cheaply if you can build a box for it...

[@b4ll4z]

Thank you I've learned a lot from that video. From a noob audiophile.

[@Kpaceguy]

Thanks for watching

[@thecman26]

Sure you can! I'm currently running 4 dvc 12" orions!

[@Goldenhordemilo]

i powered a 1000w sony xplode 12 inch with the sony xplode amp on a computer psu then use the plus sub output on my pioneer vsx-515 receiver. while living on a farm. games like war thunder sounded great.

[@Leulogy]

Apart from the subwoofer, that demo test of the Dark Knight sounded amazing through my headphones. I'm not sure if it's the mic, but I can clearly here the helicopter moving around the room. I really gotta look into Kefs

[@Kpaceguy]

I used a stereo mic so it should only be stereo left and right

[@chloenicole3340]

i know this is out of the blue but hey, i just wanted to reach out and say thank you for remembering her birthday! it means a lot. 😊

[@Kpaceguy]

Yes ma'am. I'll never forget

[@juwanhowardhll8019]

Yes i been doing it for 11 years

[@planbcj]

one of the more useful videos of youtube fs

[@Kpaceguy]

I appreciate that!

[@Mr.Hardstyle_1]

I have a 15” GAS 3200W RMS subwoofer to my tv surround system 🔊😎😎

[@jankof76]

I have that same 8" and it kicks ass..

[@quitmanlott7394]

Good video. When making any decision, it’s nice to know the ifs ands and buts. Car sub speakers are more durable because they are built with materials and tolerances, to operate in extreme temperatures, light, and humidity. Most have aluminum voice coils that dissipate heat more quickly. Home theater sub speakers are built with lighter materials, tighter tolerances, and copper voice coils. This allows them to be more reactive; reactiveness is especially advantages at lower wattages. At higher wattages, the differences between the two become much less important. As for the box, think of it as a shock absorber that needs to be tuned to work with the speaker's design, and the amp that drives it..

[@1ohmwrecker]

I use a 12" CT Sounds Tropo on my surround sound🤷‍♂️ dig real nice n low!

[@justingalasso1850]

You mainly just have to make sure the impedance matches. Too low of an impedance will fry the amp.

[@paw45]

If one connects a very low impedence sub driver to an amplifier that is not rated for low impedance loads. This can quickly burn up the amp . By the time one smells smoke, the damage to the amp is done. Impedence/resistance is extremely important when pairing to an amplifier. Low impedance means less resistance and possibly an excessive amount of current which causes excess heat in the amps components.

[@josephmccollum4173]

I would hate to have you as my neighbor 😂 but that setup is nice bro

[@Kpaceguy]

@@josephmccollum4173 i appreciate it

[@nawtmail]

My brother and I used to make custom stereo boxes years ago. How did you make that one? So beautiful!

[@Jade_Bronson]

Don't forget many people are buying Crown amps. those amps can work easily with a car sub since they can drive a 2-ohm sub. (2 ohms is not exactly good for home theater) but 4 ohms is perfect. aside from the fact that if you know what you're doing. then a DIY sub is always better than a retail sub, even if you spend well over $1000 on a single sub.

[@larrygaines7462]

I accidentally build better subs than you can buy , granted if you spend a fortune

[@jordankirkham1657]

The 8 inch alpine SWG-844 is a great sub for diy builds

[@erics7655]

Yes I hooked up a JBL 12-inch (stage 12 sub) sub in a box made for a car and slapped a dayton audio 250 watt amp on the end and was able to hook it up to my Sony receiver str-dh590. I only hook it up when I'm watching movies because I have def techs all around for normal listening

[@happyfisch1033]

Tipp for everyone who wants to diy a subwoofer: If you are fine with larg subwoofer enclosures (one very big, or multiple less big) you can get A LOT more output for the money. However car subwoofer typically are designed for smaller subwoofer enclosures (due to space restrictions in the car). They will still work (make sound, even loud and potentially clean sound), but they waste quite some bit of the "bang for the buck" potentiall that usually comes with large subwoofer boxes. In a large enclosures: A car subwoofer can probably handle more power, but also needs more power for the same SPL than a woofer that's designed for big enclosures. I highly recommend simulating the Subwoofer in "winisd" (free software). There you can see for shure. And you will see that some lower power rated woofers outperform high power woofers (in larg enclosures). Even at max power handling.

[@juststuff5216]

I use my Morel Tempo's in a t-line as my home audio mains, and I have used my Dual Peerless SLS 6.5 in a t-line, for my cars' substage! However, there is a 'Yes' and 'No' to answer to this conundrum. As an example, music generally doesn't dip below 35 - 40 Hz, whereas most moves go to 20 Hz and below. If you look at the T/S parameters of home and car audio subs, they generally reflect that. Home audio subs often have a lower FS, suspension compliance, better inductance, (if it's a quality item). Car audio also needs to cope with blending with your average 6.5" (in door, which isn't a good enclosure) midbass speakers, which for the most part, are only good for around 80Hz or higher. Your average Floor standing speaker is built better than a leaky car door enclosure, and can cope with lower frequencies, putting less pressure on a home audio sub, which means it can operate better in a lower passband. Sure there are people like Pete aka Hexibase that can design aperiodic enclosures, and 3rd, 5th and 6th order variants that can cope when complex solutions are needed, but those types of design seem to be out of reach for those who rely on free speaker designing software ... hence why only a few like Pete even attempt it.

[@lothianmcadam1]

What brings me here... The amp within my Klipsch powered sub died. I considered a passive conversion, but the idea of powering it with a cheap car amp dawned on me. And here I am, learning...

[@KillerQ]

You gained a sub because of this sub video…..get it?!? Hehe. Dumb. I subscribed. Seriously, amazing video. Love it!

[@Kpaceguy]

I greatly appreciate it

[@victorjohnson8374]

I just learned a lot. Wow. Great information

[@Kpaceguy]

I appreciate it

[@uncleswing4046]

Great video

[@Kpaceguy]

I appreciate it

[@errolallen5007]

I built a set on open baffle speakers and I put two CB sounds 8” subs and I used DS18 6.5 mids and 1” super tweeters for my two channel system.

[@antonioramirez1865]

Nice video man, I'm definitely going to do this with two spare 12 inch subs I have from my old car system, it would be nice to also show us if you can, on how to do it with a spare car amplifier, that would also be interesting. Cheers to you my buddy, all the way from Mexico.. I'm a new sub now..

[@Kpaceguy]

Welcome to the crew. Thanks for watching!

[@crazyfingers_kc]

I currently use two Kicker CVR12's (old style with the silver "spider" face). Theyre 4ohm dvc, 400wrms, sealed box. I power them with a crown amp that i paid $300 for. I paid $50 for the subs with the box. Beats any home theater sub for that price for sure

[@LauLauHip]

Thank you very much for this video! I want to build a sub for general use (like gaming, music, etc.) and I was unsure wether a car subwoofer would be sufficient

[@Kpaceguy]

It won't dig as deep but it'll be tons louder

[@keithwiebe1787]

My son is using an 8 inch factory sub out of a 2000 Explorer in a folded horn enclosure in his house. Works about as good as my MA 12inch carsub in my house.

[@pastaman6099]

Awesome idea! Definitely gonna try out something like this if any of my subs die on me

[@joeorler4097]

I run a Kicker Comp Q 12 in a custom 2cubic foot sealed enclosure off of a 500w bash amp. It absolutely sound INCREDIBLE.....the Q series is one of the best build subwoofers for SQ made today. For the price I built it for I likely saved well over $600.

[@RyanBassForLife]

Believe me use a car amplifier up and a decent car subwoofer. Its way more affordable just subscribed. You can also use a PA plug in the wall amplifiers.

[@anthonydefr]

Boston G1 car subwoofers have fuses on them and you can get it up too a 8 ohm load to be able to play them for home usage.

[@Kpaceguy]

That's pretty legit! Didn't know that

[@annybodykila]

I had a powered 15" and blew it up, had a 12" audiobahn laying around, so i cut a donut and tossed it in, sounded at least as good as the 15, but didn't hit quite as low, pretty close though. Just needs to be the right ohms and close enough watts, and you should be fine.

[@SpikeoutBattleStreet]

I have been asking it many times.

[@joebruce2180]

I have a DB drive k5 12 in a 2.7 cubic ft. Vented box, powered by a 500 watt Bash amp. The bass is rediculiouslly LOUD AND DEEP!!

[@S380SL4W]

Hi all, I build the box for my infinity kappa 120.9 which been specified in speaker manual, and I bought on AliExpress 300 watt in 4ohms sub amplifier to mach my speaker power in 4ohm as well. To tune this to my room I bought as well Dayton DSP LF and after smart tune I EQ what's have been missing and I don't think for £300 I could buy anything better. Proper BK Subs in UK starts from around £500. My set easy get to 20hz which you can fill and hear.

[@DJBIOHAZARD868]

Can I use car subs for dj equipment, as dj subs ? With dj amps ?

[@Kpaceguy]

So long as it all connects, why not.

[@lizyaj5805]

Bro...i want to know what movie scene do you go to when testing, also what music track is your go to?

[@Kpaceguy]

Hacksaw ridge, dolby demo disc's, ready player one, a quiet place. Top gun maverick..

[@unfinishedbusiness12]

Thanks man good video

[@Kpaceguy]

Thanks for the idea

[@Roof_Pizza]

2-2 ohm voice coils will give you either 1 ohm (not recommended for that amp) or 4 ohm. 7:48

[@Kpaceguy]

1, 2 or 4

[@Roof_Pizza]

@@Kpaceguy not 2

[@Kpaceguy]

@@Roof_Pizza yes you can. It's called series/parallel. That's how my diy sub is wired

[@MurderousMindstate]

@@Kpaceguy yes but you need 2 subs for that. Each sub in series to reach 4 ohms a piece and then parallel to bring the pair back down to two ohms. That single woofer is either 1 ohm in parallel, 4 ohms in series, or 2 ohm using only ONE COIL at half the output. There is nothing wrong with using only one coil even though some folks will argue about it. However that is the only way to achieve 2 ohms without a second sub.

[@TokeBoisen]

@@MurderousMindstate, if you have dual voice coils, you can run each coil on its own amp-channel, so each amplifier will see a 2 Ohm load. If you have a stereo-amp that can't be bridged and want to use it for your DVC sub, this can help you utilise all the available power and power-handling. HOWEVER this can give problems with one coil seeing a different voltage than the other, if gain matching of the two channels isn't perfect.

[@nickgould2510]

Why? Because I own my townhome and the renters next door have bass blaring all waking hours shaking our cabinets. HOA says they can’t/won’t do anything so now it’s my turn to shake the place next door so they complain too.

[@DetectiveStablerSVU]

If you do this make sure you check the ohms of the amp output for the channel and what the speaker is rated for, and check the wattage obv.

[@LRMConcrete]

I been looking for a video like this for weeks! I remember as a kid my brothers wired a car speaker to an av receiver and it blew, but I don't think they ever thought about the impedances of either one but also my mind always wondered if the voltage difference of the two systems had anything to do with the speaker getting blown... So my question is, Assuming both amps are providing the exact same output (500w @ 2ohms, for instance) is there any difference in the output of a 12V car amp vs a 120V amp?

[@Kpaceguy]

500w is 500w. You'll be good

[@jero1820]

I’m running 2 PSI 18” level 4 on a cerwin Vega pro audio amp.

[@deezsquuezeorg]

What crossover did you use for the car sub on a house amplifier?

[@Kpaceguy]

Think it's set somewhere around 60hz

[@DerohMustang]

Hey what's the cost for the speaker or can you sell it as refurbished

[@Kpaceguy]

@@DerohMustang I gave it away long ago

[@nathansolano484]

But HOW did you setup the sub? I just got a regular amp and box setup in my car, I’m looking to make some sort of plug and play setup where I can just quickly take it out of my car and plug it into whatever. Surely I can’t just get an RCA audio splitter and plug it into my laptop? That seems to easy

[@Kpaceguy]

I have a home amplifier that can handle low ohm loads and I quite literally plugged my sub up to it.

[@TheJclone]

YES

[@winglesswhistle]

Great video! I just have one question, how safe is it to run car audio gear from a pa amplifier? Where I live we run on 240v and I would rather not have a car battery where one is not needed. Is it just plug-and-play from a pa amp to a car sub?

[@Kpaceguy]

The issue its the impedance/ohms

[@winglesswhistle]

@@Kpaceguy If I am able to match the ohms from the amp to what the sub can safely handle it should be fine otherwise?

[@Kpaceguy]

@@winglesswhistle yes as long as the power ratings are close

[@winglesswhistle]

@@Kpaceguy thank you for your assistance! 🙏

[@Fdmartinez419]

Isn’t that sub dual voice coil? And you wired it to one ohm load but your amp can only handle down to 2 ohm isn’t that mismatched and will damage your amp?

[@Kpaceguy]

I ended up wiring it to 2

[@Fdmartinez419]

@@Kpaceguy ahh ok copy that

[@Nrfq]

Some car audio amps can handle ohm loads below 1ohm and even below .5 ohms. Real competition amplifiers such as high wattage class D monoblocks

[@Kpaceguy]

@@Nrfq but this is a house. Not a car

[@Nrfq]

@@Kpaceguy that’s true. But you can get voltage converters to lower the voltage to 12v so you can run car amps in home

[@jorgem50]

I didn't want to be the guy with the same svs or monolith or rs subs that 99% of the home audio guys have so I went with car subs. I have two 15s and two 10s. Just like with home subs, my bass can be heard and felt! For what I paid I am banging on a low budget vs your typical home sub.

[@smttyschannel4940]

What Amp are you using again?...I couldn't catch it

[@Kpaceguy]

For Home or car?

[@smttyschannel4940]

@@Kpaceguy home..I'm just trying to set up a system

[@jelleryt5093]

Do you have any recommendations for me i want a subwoofer for my small Bedroom to play loud and bass music, i have a budget around 250-300 and i dont have a amplifier.

[@Kpaceguy]

Bic America f12

[@mobettaspice]

Can you use car subwoofer in a PA sub box for a DJ system

[@Kpaceguy]

If the amplifier can handle it and the cubic feet requirements are met.

[@uniqueusernane8204]

Why can't we just use car audio at home as well? I have bmw e38 speakers as bookshelf and they are amazing, sound is great and quality is excelent so i am satisfied. My subwoofer is a kenwood 10inch kenwood car sub and it works fabilous and shakes the house. I think using car auduo at home is great if you can make it look good.

[@Kpaceguy]

They sound completely different

[@uniqueusernane8204]

@@Kpaceguy yes they do have a diffrent sound to them but i tuned it with equalizer and sounds much better, a huge benefit is that the sound stage is great if you atand to the side it aounds the same af the front. Experimenting is why i did that and i was surprised ao i kept using the car speakers as home speakera. Have fun with audio.

[@hardtymz2517]

I don’t think it matters that they are from a BMW. Parts express sells the raw speakers from “premium” car audio systems (Bose, Infinity, etc) for around 95 cents a piece. One was a big ol’ 6x9. I never heard an OEM car system that sounded any good. Around 2001, I do say that they got the amps right. They play like sht but they play cleanly at the loudest volume the CD deck will go. My ride had Bose, took out just the speakers, kept the Navi and Bose amps, night and day difference.

[@uniqueusernane8204]

@@hardtymz2517 on high end cars they sound great, i wouldn't consider even putting anything aftermarket ts enough to play the music ehile you drive

[@juanmazon2343]

Hey man, like your videos. I want to run my car sub in my house for movies and music. What all do I need to make this happen? Any way I can Bluetooth as well? I have a sub that can handle a lot of power.

[@Kpaceguy]

You can't Bluetooth audio to any subwoofer but you can wireless connect it to your equipment. Find an amplifier that can give you big power and handle low ohm impedances like crown or behringer amps and build a custom box for your sub. I did that in my "project Rythmimic" playlist if you want to see

[@c.fodder2444]

@@Kpaceguy You can use a logitech bluetooth audio adapter or something similar. It will give you bluetooth to anything with rca inputs. There is the obvious bluetooth lag but you can bluetooth your car amp no problem.

[@MouseSpart]

thats port noise because the surface area of the port is small based on t/s of the sub. box is from another speaker for sure.

[@1zzzzzzzzzzzzzzzzful]

Bruh you funny... Not sure if you meant to be but it's Legit complement kept the video entertaining.... Sometimes I say stuff and people take it as sarcasm but if what I said sounds like that just ignore that shit cause it's in ur head. And I thumbs upped this episode.

[@Kpaceguy]

@@1zzzzzzzzzzzzzzzzful I appreciate. I try to be entertaining in most my videos

[@ff-mu6cc]

cool!

[@cantbuyrespect]

can you run a monoblock car amp with only one rca input from a home audio reciever?

[@Kpaceguy]

Yes but the voltage would be so low that you'll distort the sound pretty easily

[@cantbuyrespect]

@@Kpaceguy so how could one go about using a home receiver to send the rca signal to a car amp? My home receiver sends the signal for a home sub over just one rca wire. I have the power supply side of the equation figured out and can power the car amp with a 100amp ac to dc inverter. would love something I could move back and forth between the car and the house.

[@Kpaceguy]

@@cantbuyrespect it would be the same way just but an rca splitter

[@tan.91]

ok so now i have a question, so you have just used a car sub in a home theatre system, so my question is can you put a home theatre sub into a car audio box and use it in your car? if so how much different would it perform opposed to a regular car sub?

[@Kpaceguy]

Yes, I've done it a number of times. Home theater subs sound better and dig a lot deeper, but they don't play as loud or handle as much power.

[@Kpaceguy]

I have. It sounds way better just not as loud

[@roslanhadi131]

Can we combine car amp N hometheatre

[@Kpaceguy]

It's hard but yes

[@01hondascott]

I have a 12inch Orion XTR in a sub box out of my old suv I just sold and I don't think I'm going to install it in my new suv, So it's sitting in the corner of my room right now, The Onkyo sub that came with my surround sound just doesn't cut it for me so I was wondering if i could just unplug the positive and negative from my Onkyo sub and hook them to the positive and negative on my Orion sub box.

[@Kpaceguy]

Nope. You'll kill your amp in minutes

[@01hondascott]

@@Kpaceguy ok thanks buddy, glad I asked someone first.

[@duanesimcoe2673]

I'm in Canada and it'll cost me more than the subwoofer itself to get it here. I have a klipsch r12sw and as far as I know it's a 8ohm woofer. Anyways I found a deal for a Soundstage that is 4ohms dual voice coil. It has the exact same rms at 200 with a max 400. Will my Amp support it?

[@Kpaceguy]

Nope

[@duanesimcoe2673]

Not even if i wire it in series?​@@Kpaceguy

[@Kpaceguy]

@duanesimcoe2673 if you wire it in series, it's still 4 ohms. Your amp won't do that.

[@JamesShehan-f7k]

In in order to use a car sub on a home theater receiver you haft to look on the back of the receiver and see what ohms it is. Then wire your sub to match the ohm. A home receiver is usually 8 or 6 ohm . If you wire it lower than that you will pop your receiver.

[@Kpaceguy]

I still wouldn't do that. You don't want to wire a car sub to a receiver. You won't be giving it sub frequencies you'll be giving it mid bass unless you go full range and your receiver will not have enough power to handle a car sub.

[@kandyaxlr]

I want to connect my focal auditor rsb 300 to a marantz nr 1504 receiver which has only one rca out for the sub. How do i go about it?Also Do i need a dc converter?

[@Kpaceguy]

I don't know what amplifier you're using

[@kandyaxlr]

@@Kpaceguyforgive me. I am a novice. do i have to connect an amp? Cant i connect the sub to the av receiver?

[@Kpaceguy]

@balaji chandrasekaran correct. The subwoofer needs its own dedicated power source

[@kandyaxlr]

@@Kpaceguy got it. Thank you

[@naughtyca131970]

Hello, I hope this comment finds you well, I like your videos but sorry there is a couple of fail on this video, one biggest difference on car audio sub and home theater sub like the Dayton UM line is FS, which you never mentioned on the video, car audio subs are only meant to play at around 32hz (box tuned) or maybe mid 20's for rebassed or slowed song, but not below 20's which a lot of movies excel, and this is why your expensive subs like Monolith, HSU, SVS and GSG DIY are tuned below 20hz and at 6:21 you wired your sub to 1ohm and then you connect it to a 2ohm load amp. you also failed to mention about subsonic filters when using a sub and dj amp like how you have it set up (I made that mistake blew my Dayton um 18s with Edge of tomorrow movie) Maybe its late at night but you will be giving a lot of misinformation and hopefully none of your viewers will try to use a car amp and I'm sure you know why. you are feeling a lot of the bass because you are hearing and feeling higher hz bass which your 8in sub is giving you, I will assume that the FS of that 8in is close to 30s, I still like you though and keep up the good work.

[@Kpaceguy]

Of camera I wires it to two because I forgot my amp was only 2 ohm. There's a million things I didn't say in this video simply to keep the video short. I've talked about everything you've mentioned in other videos, just not this one because 80% of people who watch my channel don't care. Thanks for the comment

[@notyobiz6207]

don't use a car amp in ur house? uhhh i have 4 smart 3k's hooked up no issue playing to 16hz (the key is to make a wall with all the subs u have and create another box) my "6th" order wall full of 4th orders is tuned to 19 while the boxes are tuned anywhere from 50hz down to 25 but mostly mid 30's

[@naughtyca131970]

@@notyobiz6207 or just do it right 1 dayton UM 18s tuned to 17hz in a GSG box and a behringer nx6000d and art cleanbox

[@notyobiz6207]

@@naughtyca131970 but why would i want less performance? LMAO trash advice

[@naughtyca131970]

@@notyobiz6207 less performance, do you even know GSG? There is a reason why Stereo integrity makes car subwoofers and HT subwoofers, if you want the most performance you should use the right subwoofers for the right application if you are a car guy you should know this, you dont use midrange speakers for your highs, maybe you need to learn a little more about HT, do you run those smart 3ks with car off and have no extra battery or HO alternator because that is what you are doing running it at home electricity

[@johndavid5618]

"I swoped mine years back and never looked back.

[@larrygaines7462]

The low impedance has to be 4 to 8 ohm to not hurt your home sub amplifier . Us the thiele parameters. Build your cabinets vertical and de couple the cabinets with 4 3/4 in bolts and crutch tips . Car amps require hi amp power supplies hot and costly. Dayton class d sub plates are more suitable. 8 is too little for deep bass, and cost more than a smaller magnet 10 or 12 . Dont over stuff poly fill for room use. You can build diy and save $. Good video im just a retired old fool thas has built over 500 systems in 50yrs

[@hersonargueta172]

Hey kpaceguy, I have a 5.1 v series Vizio home theater system and I would like to connect my dual 12” comp c ported box subs 2ohms and 3 separate sealed boxes L7T 8” kicker 2 ohms squared. Is it possible ?

[@Kpaceguy]

What are you using for a power source?

[@hersonargueta172]

That’s a good question, what can I use ? Not sure yet lol

[@Kpaceguy]

As long as your sound bar has an option for a sub output, you can get any amplifier that powers down to 2 ohms

[@hersonargueta172]

@@Kpaceguy ok got you. Thanks for the heads up.!

[@jessicaembers924]

Ha, i know a good tric. Take 8 of those CTsounds 12" 800watt Ozone woofers, and wire all their coils in parallel to make 8 1ohm drivers. Then take the 8 1ohm drivers and wire them all in series together for an 8ohm load to your 800 watt home amplifier, and you'll be pumping out 6,400 watts worth of sound! I'm no dummy:-)

[@PortugaRD]

ok, can you show us how to use in a car amplifier?

[@Kpaceguy]

I'm not going to use one in my house

[@iGPR3]

car subs are not necessarily louder because of a higher power rating. efficiency is a huge factor, and most home theatre/home audio subwoofers are more sensitive than your average car subwoofer and don’t need to push the same amount of power

[@cchoice4919]

Yhea car subs are louder by leaps and bounds!!… nice try tho!!…

[@bossalinedezz]

Dope !

[@jordankirkham1657]

You certainly can. I've used them before for diy builds

[@kaedeschulz5422]

Off course you can in the right enclosure with the right driver for your needs. I myself considered using car sub driver's in my DIY infrasonic tapped horn because of all the Xmax and it could be kept decently small. Sadly too expensive at here in germany. Louder than "home" driver's no though you can get the same umpf from a way smaller box. You can't damage a sub by a smaller or bigger enclosure than recommended. What does the damage is either too much excursion or too much electrical power. Over excursion is another case of too much power. Just mechanicaly not electrical.

[@shawnmarques7117]

Years ago i had a jl audio 15 w0 8 ohms hooked up to my pioneer home receiver it slammed i had Dj 15 that came with 2 tweeters an a horn i jus swapped out the subwoofer with the JL audio subwoofer.

[@FatBoyRenji]

Oh yes used to have two 12 pioneers one for left and right and they was fire when you would watch anything bass heavy I could only hook up the two 12's with one of the two 15's I forget what they was but damn did it hit, War movies was the best it was like you was there.

[@realcasama]

simple answer is yes which we expect from videos like this then you try it. but you need an amplifier

[@hardtymz2517]

Is that a serious question?? Car speakers are different beast but subs are subs. Most decent subwoofer home audio amps go down to 2-4ohms for that reason. In midfi stereo setup, we always using Image Dynamics car subs. They’re the best for a reason. Car or home. The SQ is just simply there all day everyday. Even JL wishes for that.

[@adaboy4z]

I've had several people tell me to use a car audio sub and box instead of buying an expensive pre-made home theater sub package.

[@Kpaceguy]

Yes or at least get a pre built home theater box and get a car sub for it.

[@halcyon7005]

I ran some precision power 12s for years at home. To me, being 16 or 17 in 1998 real subs didn't exist outside of car audio: home subs were HTIB garbage as far as I knew. Nowadays it looks to me like both car and home audio use the same tech. Car just does it with a higher fs. And car drivers seem slightly cheaper for the same x-max. So now I'm biased towards drivers marketed to home users, because supposedly the lower fs means lower extension. I do wonder though...with enough power, does fs even matter...at least if going sealed? I wonder if say a Zv6 12 would match an HST 12 in its frequency curve in a sealed box, just do so less efficiently? When high excursion helps a sealed situation hit the lows why does sundown say 'not recommended' for their highest excursion drivers?

[@prototype9000]

Have car subs in mine they hit allot.harder and louder if you have infinite baffe then.they also hit.lower.to

[@ansarogu]

Noob question here; if I use a 100w amp to power a 300w sub, what would end up damaged?

[@Kpaceguy]

The amp

[@ansarogu]

@@Kpaceguy gotcha! Thanks for the info.

[@lestermarasigan4678]

I have a car speakers sony xplod 1300w with small Pioneer speakers i think it is tweeter,, i want to use this at my home what is best amplifier should i use to? Id like to use this for movies, karaoke and off course for music🙏✌️ hope any one can suggest or idea to share! Im from Philippines 🙏✌️♥️

[@Kpaceguy]

Find a 1300w amplifier or close to it