Can Your Workbench Do This?

Link for Folding Workbench written and video plans: www.etsy.com/ThomasCustomWood...

[@kramersells]

Why not lock in the top first instead of holding it??

[@Happilee97]

Looks like his arms aren’t long enough to reach the top locks until the center support is removed.

[@wendylambert2717]

To show his strength! ❤

[@David-wg7bj]

Thanks for pointing that out as well!

[@xxstreme]

😂 i think same, it was wrong step. even on deploy

[@DG.2030]

@@Happilee97Lool that’s sarcasm right ? He’s hand is right next to the lock while he’s holding it?

[@jasonmcmaster4968]

I’ve seen a couple of designs like this and love them. One thing i have incorporated into my design is an additional cross brace. Everyone uses a single cross brace but by adding a second brace, I can put a piece of plywood on the bottom as temporary storage for tools/small parts that I’m working with during my projects and not clutter up the top of the table.

[@ThomasCustomWoodworks]

Great idea!

[@Tadjourah]

​@@ThomasCustomWoodworks àaaa01❤❤😊❤❤❤❤❤

[@ALCRAN2010]

​​@@Tadjourahurther more, you can widen the holding braces that go on the wall, so as to accommodate the lower plywood piece, the the rest of the table as shown here, all in one spot.

[@allenkotlan3606]

" temporary" storage with an inch (25mm) of sawdust over everything as it works in my shop.

[@jasonmcmaster4968]

@@allenkotlan3606 why you gotta attack me like that? You don’t know my life. I mean… you’re 100% correct but you don’t know me 😂

[@angelamapes7553]

I need a dining room table I can do that with. Awesome!

[@ThomasCustomWoodworks]

Thanks!

[@stephenowens5375]

I need a wife I can do that with.😁

[@raymarshall2995]

You made that look easy, but I still saw how much control, and muscle it took to lift that table, steady it, and hold it carefully. That sucker is heavy!

[@johnly7688]

Pretty awesome dude. I'd probably add 2 vertical 2x4 under the support wall beam just in case. Great job!

[@ThomasCustomWoodworks]

Thanks!

[@charliedavis1384]

Agreed, I just added 2 small “L” brackets to ensure it doesn’t slip off when storing. Good job!!!

[@papparocket]

One suggestion to reduce the wobbles common on this type of fold-up bench with an unsecured cross brace is to put a threaded insert into each end of the cross brace and a hole in the bottom leg brace that lined up with the insert so that a bolt with a washer will go through the leg brace and screw into the insert. A knob on the end of the bolt would make it easy to tighten by hand. As suggested in another comment, add a second cross brace and lay a piece of plywood over the cross braces will you get some temporary shelf space is a great idea. Plus a second cross piece with the same threaded insert in the ends of the cross brace and bolts through the leg brace would lock the base together so firmly there would be little or no wrack to the workbench. The negative is that it would add another minute to set up and take down times.

[@user-jd5fn1uy3f]

LOVE THIS! AWESOME IDEA! Making them fold and even roll is great because then they can be stacked easy! Film crews that have to recycle wood should do this and make tables and workbenches that can be reused out of the construction wood!

[@Gods1servant]

Excellent idea!!!

[@ThomasCustomWoodworks]

Thank you!

[@MyrtaLopez-wn2xz]

SIMPLESMENTE. EXPETACULAR. ADOREI !!!

[@Hannadayflo]

Wonderful! A kitchen table would be great like this too if one had limited space.

[@faustovera1097]

Muy buena idea 👏👏👏👏👏 pero sería bueno si nos pasa, un video cómo se hace la mesa, ho las medidas 🙏🙏🙏 gracias !!!

[@valnicebarbosa5871]

Amei, pra quem tem pouco espaço como eu, é uma maravilha. Valeu a dica.

[@nubiagoncalves8505]

excelente! quem sabe um dia eu possa fazer assim com todos os meus móveis. sonho isso sempre! tenho muitos gatos iria me ajudar bastante. incrível genial!👏👏💯👍

[@andhewonders]

Pretty optimistic thinking my workbench would ever be empty, but that might work if there was a window behind it and a skip outside.

[@swiftraider759]

This is really cool. you don't happen to have a step by step video building this do you? this would be a cool weekend to weekend project.

[@ThomasCustomWoodworks]

I have detailed written and video plans here. Enjoy! etsy.me/3IFzI34

[@Normal1855]

Nice table.

[@bcroft68bc]

Fantastic idea for the man that has to store his tools away because he doesn’t always have a project to work on and is either working in a small workshop or his garage, (Like me).

[@GenarusMatus-ou6oq]

Muy buena idea, solo creo que cuando la subes debemos poner los cerrojos primero y después quitar el (perno ) palo y doblar las patas. Exelente idea 🎉

[@ThomasCustomWoodworks]

Thank you!

[@toddcrockett5957]

I made one similar to that. Everybody wants me to build them one. lol.

[@lindapack3229]

Listen fantastic idea for workshop whether it be for a woman or men thanks for showing❤❤❤❤❤❤

[@ThomasCustomWoodworks]

You’re welcome!

[@dandagaiola4750]

É show de bola ficou muito legal parabéns 👍 👍 👍 👍

[@boboraratheviper]

What is this music ? Friggin' love it !

[@NemesisVNV]

Great idea, I'm curious how sturdy it stays in place with those casters. Depending on the work being done I imagine a lot of jimmys and shakes?

[@malabarista2023]

Excelente!! Felicitaciones!!!

[@mnchannel]

Sangat praktis dan simpel 👍

[@AnaCristina-hh9xe]

Ideia genial parabéns gostei muito

[@veralpereira]

Excelente trabalho 💯🇧🇷🔥🔥

[@nickmartinez7163]

Great job 👏👍👌🙌

[@ThomasCustomWoodworks]

Thank you!

[@user-rt4xp7ri1u]

壁収納なんて…最高ですよね。😆 ウッドデッキも付け足したデッキを、こんな風に上げて収納できるようにしたいな

[@MarcelMarcheschi]

C'est Super !❤😁

[@wenepzoli]

Super cereative! Good day! Thanks shareit!

[@tomnewland8715]

Thanks for going to effort to put on line. Love mine

[@user-hk8si8gt8xni]

Jizzaxda is very good place to live and enjoy the same thing as soon va boshqa ko'ngilochar dasturlar milliy va har bir inson o'z oila a'zolari bilan bir necha yil ichida bir

[@AmjadAli-ej3dg]

Assalam u Alaikum Wow good idea brother..

[@anthonydewayne712]

My work bench has stuff on it from the work I do.

[@toroah]

haha you have no idea how much time you saved me... lol i was about to say i'll make this over the weekend... and then i read your comment and was reminded my bench always has stuff on it too lol.

[@Chris-fl6fx]

Not to speak about having no empty wall available because off all the materials, tools and machine you (want) need to have to get the job done. 😅 Nice job and idea though !

[@tedihermawan6105]

ilmu yang bermanfaat

[@RusydiRabbani-kf1jk]

Nice ideass!!! *talented skill😊😊😊

[@graceoverall]

A brilliant design, but I would improve a couple things. Namely, spring loaded locking pegs for the legs instead of the cross bar, and also make the bench long enough to accommodate traditional casters instead of the side mounted ones that would buckle under heavy loads over time.

[@user-sr3xi9nj1h]

عمل متقن واصل

[@Zenforya]

Awesome space saver. Idea

[@josefreitasoliveira4547]

Excelente trabalho

[@jtlifechannel9134]

Wow great idea🎉

[@CAESAR_PUTIN_LOVERS]

روعة .. Nice job ♥️🙏

[@simonjaviergarciaruiz9055]

CON LA MITAD DE MADERA QUEDA FUERTE Y MÁS MANEJABLE .

[@ezzatramadan5987]

Very good

[@ThomasCustomWoodworks]

Thank you!

[@crystalvanchure2759]

I add chain so when bringing down it doesn't break or hurt anyone

[@qualitydigitalvision]

Wow Excellent superb very nice

[@silvaniasiqueira5456]

Top essa ideia👏👏👏👏👏👏

[@user-hm9fv9xk7x]

That would be the most useless thing for my workbench to do, it is literally never cleared XD

[@ShivamSharma-zd8lw]

haha i agree

[@JTodd-fp2ve]

GREAT!!!! 👍

[@Da1stDay]

Great idea.

[@frankbullitt4556]

very cool idea

[@ThomasCustomWoodworks]

Thank you! Cheers!

[@goranhinic9242]

Seem like it would be a bit wobble without any diagonal bracing, no? Can you open it and move it side to side?

[@joec3247]

I Like Those Casters, What Are They Called, Where Can I Get Those? Great Bench Idea By The Way, Very Creative!

[@mochafit42]

I need this so bad

[@bienletemknowchannel]

Amazing

[@anthonymwangi]

For real. Wow. Great. I like it ❤

[@ThomasCustomWoodworks]

Thank you!

[@h.d.s.s.3837]

Awesomer!

[@buildandbescene]

Seen these! Wanted to do one but my bench space changes so much

[@tomthompson7400]

a simple latch on the top bracket would make life a lot easier , like a garden gate latch

[@abdullahjan8824]

Ketny ka he

[@tomthompson7400]

@@abdullahjan8824 probably

[@gabrielmorales1066]

That’s amazing

[@aaronag7876]

With the 2 black bolts at the top, could you not have used the table legs support beam, the one you put and rest on the top of the table, after putting the table on the wall ? Use the support beam in a way to hold the table onto the wall, seeing as it is wide and would require a few wooden twist wedges to hold the beam. Just seems 2 little bolts are not strong enough and the weight of the table will pull them off the wall

[@ZulfiqarAli-rf6fp]

Wonderful

[@calvinchung2036]

Clever!

[@linamulina5716]

Cakep buat meja nya irit tempat

[@ThomasCustomWoodworks]

Thanks!

[@FrancisFurtak]

Yeah man, too cool!

[@deldom174]

Excellent

[@joebourke1018]

Cool 👍👍

[@ThomasCustomWoodworks]

Thanks!

[@ZZZ-qy8wj]

Let's see how that works out for you as you get older. The best inventions are the ones where even a senior citizen can use it or do it.

[@anberart123]

زبردست

[@tukangkayujawa974]

I like it 👍👍

[@Nusremmus]

I dig it, but I'd try to work a french cleat in there somehow . LOL

[@derekhobbs1633]

song name?

[@RandyHollis-tx6zc]

Thanks!

[@ThomasCustomWoodworks]

No problem and thank you!

[@FreeWilly2021]

👏🏻👏🏻👏🏻👏🏻💪🏻

[@colewomble7078]

Yes it can. Cuz I just built one exactly like this

[@Indiesmoker25]

Steel One For Metal Works possible right?!

[@javierortega8024]

Me encanto

[@ThomasCustomWoodworks]

Thank you!

[@luizcoloniese2700]

Eu vanda barros. Maravilha.

[@mahfoud514]

Bonne idée mai un peus compliqué

[@marlonleonid]

Me gustaría ver el vídeo de cómo lo hiciste, materiales y medidas

[@yoviss-vsz8851]

Is the top it’s plywood or what u used

[@jerryklooster438]

Wait. Before I start I have to reassemble my work bench...again.

[@mauriciod56]

¡Great!

[@FknNefFy]

Might want a back plate. Your wall is not gonna like that edge when you lift it up each time

[@reynoldmiguel6463]

Looks like he already damaged the dry wall. (Bottom right)

[@soarebv]

Cool

[@nancybarrett6266]

That's Badass 😊

[@ThomasCustomWoodworks]

Thank you!

[@Sophiaboneu_]

Nice🎉🎉🎉🎉

[@andersonribeiro5844]

Gostei otimo

[@manchitaaguilar3547]

Muy ingenioso

[@ThomasCustomWoodworks]

Thank you!

[@linamulina5716]

Bisa juga buat tempat tidur juga kl ya

[@dkpbyt]

I believe there’s a better sequence of stowing it.

[@azwarchaniago5592]

Mantap sekali

[@VlogAntoTv]

Mantap bosqu

[@marciochaves4700]

👏👏👏👏👏👏💯👍✌️

[@cgifly2]

Its very cool but whats the point? I am not being mean.what do you need the space for? when its up if you store stuff there you have to move it anyway as opposed to just leaving it there. In my shop wall space is the premium.

[@ConectadosHoje]

Perfeito 👌

[@stephencochran6843]

Do you have a plan for this table?

[@ThomasCustomWoodworks]

Here you go! www.etsy.com/listing/1370607572/

[@getinkt338]

If my ladder is in the way, I do something else. All joking aside, gorgeous idea, great craftsmanship, but you can’t use it in under a few minutes, assuming you put nothing in front of it you have to move (big workbench shaped spots get filled quickly in my shop) I guess I just don’t see the overall point unless you don’t need it that often, if that’s it, but a folding table for $50

[@MUTzSparky]

What happens when the bottom part slips out and hits all 8 toes?