The Best Tutorial for Installing Custom Tire Letters

[@RG-sk8cc]

Excellent tutorial for folks like me who had no idea this was so engaging. Looks like an all-day activity one Saturday when I have absolutely nothing to do except drink beer

[@BasinMotorsports]

It took longer than I expected, but I tend to overdo things a bit searching for perfection. Cleaning seems to take the longest time of the whole process. Once you determine where to install them on your first tire, the next three go pretty quick. The older the tires are, the more time the cleaning takes. Thanks for watching!

[@allanknight843]

Ray Grogan Hey ray, that reminds me, about 30 or so years ago, when i was 20yrs old, i had and old, beat up F100. One day i felt like changing the oil. So, i went to the auto part store, then I stopped at the convenient store and picked up a case of Budweiser. It took me all day and into the night. I actually had halogen lights set up. Lesson learned

[@AtLeastImNotLiberal]

Finally someone else who takes pride and the time to do the job the RIGHT way. Cut corners pay for it later

[@shawnhasty7480]

I must admit i didnt take the time and care that you did when i did mine. Im going to purchase another kit and take advantage of the time my car is in winter storage, and with my new rear tires in my dining room, I'll be able to let them cure better. Thank you for the great video it is a huge help.

[@greg.s8592]

looks good. I found that when I installed tire letters on my car, suddenly I was brushing against curbs like never before and ripping them off, so I always have spares now

[@Mr.Frost181]

Watching this video just made me change my mind on putting tire letters if I have to be all day with this 😩😩

[@BasinMotorsports]

Mine are the permanent letters, so the extra adhesive is needed. You might try the temporary set, which should be less time. I went a little heavy on the adhesive, which has been a real PITA to take them,off this week.

[@Mr.Frost181]

@@BasinMotorsports I was going to go custom or just bring out the stock letters on the tire

[@BasinMotorsports]

@@Mr.Frost181 If you are just coloring the tires, you might try a tire paint pen. Should be less work, but it does fade over time.

[@Mr.Frost181]

@@BasinMotorsports that's what I was going to do lol but if I have to buy the one like this well I'll just do that then so it will last long

[@skipdegraff6547]

I'm trying to buy raised white letters from the factory

[@dirkanthony23]

Thanks, after I watched your video I installed using your methods...Came out really well took me 3 1/2 hours

[@BasinMotorsports]

Great to hear! You did it in half the time it took me. Filming and fumbling my way through it took a while.

[@copaceticproductionz5924]

yeah it takes time. took me 2 days. did 2 tires per day lol

[@anything7087]

What about whasing tire is it worth gor letter?

[@BasinMotorsports]

@@anything7087 The kit comes with a spray that you can use on a rag or towel to wipe the letters with. The instructions say not to use a tire dressing on the letters.

[@AcAttack81]

This is the perfect video, I was about to go out and slap mine on real quick before 76 degrees in NH turns to 40 degrees in about 2 hours, i have left over cans of brake clean from doing my brakes i heard is ok too? Love the tape and trim the bottom of sticker idea, definitely doing that. Also was worried about spacing top to bottom and you nailed that. Thanks man, interested to see how much tire shine comes off my tires from shows lol Definitely a round on me if your ever in New England🍻🍻🍻🍻🍻 (Im 45 mins from Bean)

[@jrolivarez8011]

How did it work for you ? How long did the letters last on wheels is the adhesive strong?

[@BasinMotorsports]

I had them on for two years before I sold the car. I never had any issues with the adhesive, and they were tough to remove. I have a video removal video also on the channel, so you can see how well the adhesive can hold up.

[@jrolivarez8011]

@@BasinMotorsports Awesome thanks for the quick response 👍

[@rajeshsingh-wz8fx]

Thank you for that great video. Clarify for me, that lettering is sticky at the back, do I have to remove that stickiness with acetone and thereafter apply the glue?

[@BasinMotorsports]

The letters are not sticky, so you do not need to clean them. The glue in the bottle is what holds them on the tire surface.

[@rajeshsingh-wz8fx]

@@BasinMotorsports thank you

[@scottwood33139]

Thanx for going into detail on how to do this. Took me 7hrs in 2 days but this video was very helpful.

[@BasinMotorsports]

Awesome that it could help!

[@johnthegodfatherslack]

What a fantastic tutorial. Very informative, you make a great instructor. Getting a set soon.

[@BasinMotorsports]

Glad it was helpful!

[@ayeeffkay]

What kind of glue is that ..bc mine doesn't ship with glue bc its flammable

[@BasinMotorsports]

There is a link in the video description to the proper adhesive.

[@quezwoodard1646]

I bought some new tires and added the stickers before mounting and putting air in them. Is that bad

[@BasinMotorsports]

No. The installer just needs to be careful not to damage them. Otherwise OK to do beforehand.

[@brianpreston3052]

I have the nittto nt 555g2. Top of the tire says Nitto and the bottom says nt 555 g2. How would you use the lettering on the tires. Thanks in advance

[@BasinMotorsports]

The application process is the same, and you could do NITTO on the tires. Or you could go custom if your car has a name. customtireletters.com/products/nitto-tire-lettering-kit There is a discount code in the video description too.

[@brianpreston3052]

@@BasinMotorsports thanks bud. Just ordered the lettering kit. Can't wait to put them on my new tire and rim set up.

[@brianpreston3052]

@@BasinMotorsports thank you bud. Should receive the package by Tuesday

[@brianpreston3052]

How many bottles of glue should I have just in case.

[@BasinMotorsports]

@@brianpreston3052 If you bought the kit, it should come with a bottle of glue. I had extra leftover from the installation video. I would bet you'll have some left over also.

[@dustye753]

Would you say this glue is like tire patch adhesive?

[@BasinMotorsports]

Patch adhesive is more jelly-like than this when I used it last. This stuff is like super glue. It's very liquid.

[@dustye753]

​@BasinMotorsports Thanks I ended up using 401 glue, it's on ebay for like $2/ bottle. Smells like superglue, and seems to be working perfectly. I would have thought something more flexible would be better as it's on the sidewall.

[@TimothyColeman-li9ud]

Any kind of good quality glue I can use that can be purchased in person at maybe a local parts store or somewhere other than ordering online? Thanks in advance

[@BasinMotorsports]

I don't know the chemical composition of the liquid adhesive to recommend something else. You might find something that can bond rubber to rubber locally. I have never looked.

[@partyboy0319]

When washing the car and using degreasers on tires. Will these get damaged or fall off. How many washes would it last.

[@BasinMotorsports]

If they are colored, degreasers and tire shine can damage the coloring supposedly. I never had an issue with hand washing the tires with car wash solution. Mine stayed on for 2 years with no problems. I sold the car and took them off at that point.

[@jamessignorelli852]

How long do these letters last ? How much do they cost ? What company and do you have to order them or does someone carry them ?

[@BasinMotorsports]

I had them on this car for 2 years, but took them off when I sold the car. They were less than $100 at the time of the video. I haven't priced them since. I went through Custom Tire Letters to order them, and there is a link and discount code in the video description. Someone may have them in-stock. Mine were a custom design, so it was an order ahead deal for me.

[@switchblade1Le]

Subscribed just because I see all your hard work even to the simplest details.

[@juliet2five]

Question.... My tires have raised black letters. The sidewall isn't smooth. It's a 20" BfGoodrich All terrain will the letters work over these raised black letters?

[@BasinMotorsports]

They will work over raised letters. My tires had black raised letters too. Just be sure to wet out the letter well and you should have no problems.

[@Robocoppat]

This is the most informative tire lettering video I've ever seen. Dude i dig those glasses. Where did you get them from? Consider me a subscriber. Oh i forgot to ask, do they make these for motorcycle tires to?

[@BasinMotorsports]

Glasses are 3M safety glasses with custom prescription lenses. Mine are about 10 years old probably. Tire letters can go on motorcycle tires also. Just had to order them for motorcycle tires.

[@navarox]

where can i get the material used for cutting the letters?

[@BasinMotorsports]

I can find the lettering material off a Google search for "tire stickers".

[@dealer1237]

I know a few years have passed, but how did this lettering kit hold up?

[@BasinMotorsports]

I had no problems in the two years I had them on. No color change or peeling.

[@dealer1237]

@@BasinMotorsports That truly is proof that proper preparation is the key to longevity. I'm going to give it a shot. Than you!!

[@BasinMotorsports]

They were a complete PITA to remove. Good prep will make them last the life of the tires. There should still be an active discount code in the video description for CTL is you buy from them. Good luck!

[@JimJuno]

Just a question. I did it once with my bike but because the wheels aren't free it was an 8 hours pain in the ass to do it right. Now my new tires are on the way and so are the new set of letters but I wonder if I can prep the tires first and once they are finished have them mounted to the rims. The question is; Is this possible with the letters already on there?

[@BasinMotorsports]

You can do the letters before mounting the tires. The shop will need to be careful not to damage the letters. I would put a layer of painters tape or something easy to remove on the letters to prevent any scuffing while the tires are mounted. If the shop is just mounting the tires, and you will be putting the wheels back on the bike, I'd do them after the tires are mounted but before the wheels go on the bike.

[@JimJuno]

@BasinMotorsports Thank you for the fast reply. To use the protection is good advice I didn't think about. Yes they will install them for me. To put the tires on there and remove the wheels as I did think about but for that I need a lift. I'm going to try it the other way and post feedback on your video. It might be useful for your audience. Thanks man!

[@ericmeza7573]

Ok so I purchase Felcon letterings but my letters come a black rubber so the letters on stuck to this black rubber how do I install them to my tires

[@BasinMotorsports]

Do the letters have a clear transfer material like what I used? Are you supposed to peel the letters from the rubber they came on and transfer to your tires? What brand are the letters (who did you buy them from)?

[@oscarrodriguez-xj1vp]

Can I drop my vehicle down off the jacks after the process???

[@BasinMotorsports]

Absolutely.

[@oscarrodriguez-xj1vp]

@@BasinMotorsports thanks for answering my msg man! Question where should I keep buying my decals??? Any recommendations??? Also! I’ve seen decals applied with the heat gun? Any difference ???????

[@BasinMotorsports]

The ones with a heat gun are usually temporary for an event or limited time. The glued on ones are meant to last as long as the tires (usually years). I'll always send you to Rob at Custom Tire Letters if they have what you want. He offers a discount in the video description that should still work on their site.

[@oscarrodriguez-xj1vp]

@@BasinMotorsports got it! Right on my man I appreciate you’re information!!!!! God bless you brother.

[@tacticalgaming2666]

I just put on the tire letters and when the glue was still wet i sprayed the cleaner directly on the tire and there’s a huge mess on a part of the tire what’s the best way to clean it up it’s around 2 letters

[@BasinMotorsports]

Try acetone.

[@mrhuemac6607]

Sir. How are you? How can I get the lyrics and glue? I mean how can I orden I need the name what I need I don’t find the glue :/

[@BasinMotorsports]

Look in the video description. I have links to the Custom Tire Letter website (plus a discount code), and an Amazon link to buy more glue if the lettering kit isn't enough.

[@CrimxSun]

Maybe weird question, but can you also use scale model tire glue like traxxas, or flexible all in one kit. This special tire glue is hard to find in my country.

[@BasinMotorsports]

Not sure if it can be used. It sounds possible. Have you contacted Custom Tire Letters to ask? Rob (the owner) should be able to help if you email him.

[@CrimxSun]

@@BasinMotorsports I found some good glue, either way thanks for your reply. Also, isn't acetone harmful for the tire and rim finish, if you leave it like that. I've read that you need to wash it off with water and soap first. I'm scared for it to eat away my rims lip.

[@BasinMotorsports]

@@CrimxSun I never got it on my wheels, so I can't say.

[@Vasquez19781]

Yikes! This seems like I need to have it done professionally lol. I bought some thinkin I could do it but, ya-nope…I’ll mess it up. GREAT TUTORIAL!!!! 🙋🏾‍♀️🙋🏾‍♀️❤️❤️

[@BasinMotorsports]

It's not such a bad job. Just take your time on it.

[@rushnerd]

Seriously, you can do it. It's not as daunting as it seems once you try doing it yourself. Doesn't have to be the best job ever, just get a rag, acetone your tires and backs of the letters and tape them on where you think they should go, then just flip the letter set on to the top of the tire and "color inside the lines" with the glue and carefully bring them down to and press 30sec to seat. You can do it.

[@nigelsergio5512]

Hey where did you get the stickers from ??

[@BasinMotorsports]

Directly from Custom Tire Letters. There is a link and discount code in the video description.

[@chynabarnescb]

The counting was adorable 🥰

[@barbarafuller5098]

omg your the only one who describes this so well

[@AngelDrone2024]

Amazing video!! What size are they?. .... 1inch or 1.25 inch??

[@BasinMotorsports]

1.25 inch for an 18" low profile tire.

[@AngelDrone2024]

@@BasinMotorsports thank you.. So i might need 1.25 inch. For my tire 20"

[@BasinMotorsports]

Sorry, just measured. Mine are 1.25". I would ask Custom Tire Letters what size they recommend for a 20" tire. They picked the 1.25" for mine.

[@KuyaPow626]

Thank you for such a thorough guide! Isn't it better if you're taking the wheels all the way off anyway to do it on the ground? Then gravity works with you and you can position the letters easier?

[@BasinMotorsports]

You could do it that way just as easily. Whatever is easiest during the install process.

[@KuyaPow626]

@@BasinMotorsports Im cleaning my wheels with acetone now... Remind me again why you said you need to use around ten towel wipes before proceeding? My paper towels are picking off the black grime from the rubber, but I wonder if that is forever going to happen or if it stops after ten passes... Oh, my tires are pretty much BRAND new, like 100 miles on em. Ive only put a shine on them once and I just washed the wheels with wheel and tire cleaner products.

[@BasinMotorsports]

@@KuyaPow626 The 10 rule was when my tires stopped leaving residue on the towels. If the tires are newer, they may not take as much work to clean. Mine were over a year old and had seen many road miles.

[@fredhammond9597]

Can you galvanize letters to tires?

[@BasinMotorsports]

No. Galvanizing is adding a layer of zinc to iron or steel for protection.

[@dustinrogers5667]

can you use tire shine over the sticker?

[@BasinMotorsports]

The instructions say to avoid it, so I never tried it. I would spray a blue shop towel and wipe tire shine on the tire and avoid the letters as best I could when I went to car shows.

[@EVicTion_NotiCe504]

They sell a tire shine for that

[@sgtpepper122]

@@EVicTion_NotiCe504yep, water based

[@rushnerd]

Hey not sure if you still read these comments, but that was a FANTASTIC tutorial! I thought I heard some people speak of sanding down the raised lettering on the tire smooth for the aftermarket letters to stick. It seems like you didn't have to do anything like that. Do they still stick fine after all that?

[@BasinMotorsports]

I read every comment. I didn't sand anything down beyond what I showed. The raised letters will stick fine if the prep is done well. Mine stuck with no issues for 2 years before and were a sumbitch to get off. Take your time and they will outlast the tires.

[@rushnerd]

@@BasinMotorsports Dude, thanks so much man. I was worried I had to do more prep work. Just got new Michelin Pilot 4 S tires in for my 88 MK3 Supra and am putting said stickers that cover the logo (and are oversize) on each side. I was just worried since the lettering is raised it would botch it, but I completely trust you on this and I'm going to follow your instructions except that some of my letters are falling off the guide tape haha. I'll figure something out. You got a new sub.

[@chrisislas1838]

Very, very thorough. I have mine and ready to put on but wanted more info of do's and don't. This content helped out tremendously. Thank you!

[@BasinMotorsports]

I tried do make sure everything was overdone. Just take your time on them, and they will turn out great.

[@chrisislas1838]

@@BasinMotorsports It came out great. Have people believing I bought the tires that way...tells me I did a very good job at it.

[@BasinMotorsports]

@@chrisislas1838 Awesome to hear! I'd say if people don't recognize they are added, you did great work.

[@imadnassan9159]

Hallo Bruder, wie bekomme ich dieses klebrige Material?

[@BasinMotorsports]

Check the video description for links to the tire stickers and adhesive.

[@cantwaitkid]

It looks as if this is the same process as applying a bicycle tube patch, including holding pressure for 30 seconds. This seems to be a vulcanization of rubber process. Are these letters made of the same material as a tube patch?

[@BasinMotorsports]

I don't know for 100%, but I would guess they are very close if not the same.

[@ThisIsTheTruth34]

Hello sir! I am wondering if you still have the lettering on your tires and if so how are they holding up?

[@BasinMotorsports]

I sold the green Mustang in April 2021 and the new owner asked for them to be removed. They were on for 2 years with no issues.

[@dannyr.8326]

I'm doing this soon thank you for an excellent video.

[@BasinMotorsports]

Best of luck! They add a little something extra to your vehicle.

[@markwagner2685]

what is the brand of the tire letter glue? and kit cleaner name and brand.

[@BasinMotorsports]

I got the kit through Custom Tire Letters. They are a partner of Tire Stickers, and you can find extra glue under Tire Stickers. I've seen it on Amazon among other places. If you go through CTL, there is a link to their site and a discount code in the description.

[@TheManic.5-OH]

Genius! One thing im doing is using a AA battery to roll the letters on, like a rolling pin

[@BasinMotorsports]

That will get the air out. I like it.

[@eveistrongsaint893]

Can you put letters on tires that have dupilcolor on them?

[@BasinMotorsports]

You can, but I am doubtful the letters will stick well.

[@eveistrongsaint893]

@@BasinMotorsports even if given a sufficient amount of time to dry?

[@BasinMotorsports]

@@eveistrongsaint893 The adhesive causes a vulcanization process to occur between the rubber letter and the tire surface. The duplicolor may prevent the proper reaction. You can try it and see what happens.

[@malcgraham.vintagecomputer1876]

Hey how long have you had on your tire letters now..

[@BasinMotorsports]

I had them on for 2 years, and then removed them because I sold the car. The new owner didn't want them.

[@malcgraham.vintagecomputer1876]

oh they lasted long then. great. i ordered mine already. soon to be delivered and installed. thanks again for your great tutorial @@BasinMotorsports

[@brianpreston3052]

I was wondering. I just bought new rims and tires. You think it'll be better to put the lettering on before I install the rims.

[@BasinMotorsports]

I'd do it after. Less chance that they will be damaged during tire mounting, and you can use the rim as a visual gauge where the letters look best spaced.

[@brianpreston3052]

@@BasinMotorsports thank you sir. Awesome job.

[@doaburnout1205]

Does the tire need to be mounted on the rim? Or it doesn't matter?

[@BasinMotorsports]

Doesn't matter for applying them. The only concern is how close they are to the wheel area, so the tire shop doesn't damage them during wheel/tire mounting. You may want to cover them in painter's tape when getting the wheel mounted to prevent scuffing.

[@doaburnout1205]

@@BasinMotorsports I'll just wait I figured they might scuff or peel off during the mounting process.

[@rabbitenjoyer6320]

did you rebalance the wheels after applying your stickers?

[@BasinMotorsports]

No. You don't need to.

[@rabbitenjoyer6320]

@@BasinMotorsports cool, thanks for the quick response! Great tutorial btw

[@randy9573]

What about any adhesive ooze out.

[@BasinMotorsports]

It will dry, but you can wipe excess off while it's wet if it bothers you. It doesn't have any functional problem.

[@MoDodgeMoMods]

This is a very detailed Installation. Excellent video👍

[@BasinMotorsports]

It's a little long, but I went overboard on details. Thanks for watching.

[@mhb75clothing]

So what happens when you need to buy new tires?

[@BasinMotorsports]

You buy new letters. They don't come off easily.

[@bigbankrolll]

What glue are y’all using to keep these permanent stickers on for a very long time very snug? I got on interstate one time and lost a lot of letters

[@bigbankrolll]

Help !!!

[@BasinMotorsports]

The kit from Custom Tire Letters comes with a bottle of adhesive, but if you need more there is a link to Amazon in the description for the product.

[@jonbenzo4175]

what was the adhesive you used? i bought letters, but i don't believe they provided me with it

[@BasinMotorsports]

My kit came with a bottle of adhesive. Tire Stickers does sell a bottle of adhesive on Amazon or through their website if you need one.

[@jonbenzo4175]

@@BasinMotorsports thanks for the reply man i actually just looked up quick after i sent that and found it in Amazon, appreciate the vid dog

[@davidarmstead1989]

Should I grind the molded lettering on the tires down to have smooth surface on the tire ??

[@BasinMotorsports]

No. You can just go over them if they aren't too large (thick). My BFGs had lettering that I just covered up.

[@LostPie]

I wish I sanded them flat first. One thing I will mention is to not push with all your force when putting these on, it will cause them to dry with Indentations where your fingers were pressing. Sort of just let the adhesive do the work, and you just hold them in place

[@rontorres6320]

Do you still use tire shine on ur tires n does it make the letters look dirty

[@BasinMotorsports]

The instructions specify not using tire shine, so I've never tried it.

[@edwardcarelli1381]

Can you use a tire shine on the letters ?

[@BasinMotorsports]

The instructions say not to, so I never tried it. The kit does come with a letter cleaning spray.

[@edwardcarelli1381]

So do you dress the rest of the tire and not the letters? Thanks, your explanation was very helpful. One last question, my tires has groves on them. Do you recommend I sand them down to get a smooth surface? Thanks again.

[@BasinMotorsports]

I never worried about dressing the tires after the letters. I just cleaned them at shows with water and wiped them off. You could spray the tire dressing on a towel and wipe it on and avoid the letters. I never had an adhesion problem due to raised letters or grooves on the tire. The letters will conform to the surface they stick to, grooves and all. I had the letters in the video on for 1.5 years and never had a peeling issue.

[@edwardcarelli1381]

@@BasinMotorsports Thanks for all your insight. Put the letters on today, quite a project for a 77 year old but was lots of fun. They look really good. Thanks again. Ed

[@BasinMotorsports]

@@edwardcarelli1381 glad to help. What did you put them on?

[@zulharith1709]

I stop usng tyre sricker once you hit the curb or other wall it's gone n you going to purchase again and again...I use paint pen if ut hit curb I just paint it again...

[@barbarafuller5098]

were do you live ..> id love to hire u

[@BasinMotorsports]

South central oregon

[@BestQoqaj]

Glue didn't work for me it fell off I put black silicone on letters

[@FutureLaugh]

can you respray your tire gloss over the new tire letters or is that going to strip them

[@BasinMotorsports]

The instructions say to not use tire gloss, but doesn't say why. It may affect the dye for the color or the adhesive.

[@johnjohny295]

So how long for the whole job

[@BasinMotorsports]

4-8 hours depending on how dirty the tires are and how thorough you are. It took me 8 including filming.

[@jesusmadrid6485]

Where did you purchase the stickers from??

[@BasinMotorsports]

Directly from Custom Tire Letters. There is a link and discount code in the video description.

[@frankieperez6534]

How long does this process take for all four tires ?

[@BasinMotorsports]

Plan on 6 hours if you follow my video. It took me 8 because I had to film and adjust things as I went.

[@josephtorres3821]

What's size lettering 1 inch or 1.25inch

[@BasinMotorsports]

Mine are 1.25 inch letters.

[@tt-rs1457]

Does it still last ?

[@BasinMotorsports]

I had the letters on for 2 years without a problem. I removed them when I sold the car.

[@garydrabo1510]

Do you place the sticker directly over the original black lettering i.e. "BFG ALL TERRAIN' or must it be a smooth section?

[@BasinMotorsports]

The smoother the better, but they will go over the BFG letters. My tires weren't thick lettering since they are low profile, but the A/T may have thicker letters.

[@jasonbotting4436]

What is the actual web site name to order please

[@brianpreston3052]

Are those the f14 rims

[@BasinMotorsports]

No. Rovos Pretoria 18x10.5"

[@joelyngdoh8010]

The glue what company is it....???

[@BasinMotorsports]

The label shows Tire Stickers, but beyond that I don't know who the manufacturer is. They may be able to tell you.

[@staceysimple9493]

Use barge cement

[@maengel071]

Can you also count Arkansas?

[@BasinMotorsports]

Yes, but I say Arkansas a little faster. I may have to say 35 Arkansas.

[@boyscout-p3u]

mine fell off after a couple of weeks, maybe the glue is substandard

[@victoriamojuta]

Awesome video. 👌 Very informative

[@jmb2956]

Great detail video Thankssssss

[@choubakablackscars1664]

Quel colle prenez vous svp

[@BasinMotorsports]

This kit comes with the glue. There is a link in the video description for Amazon to purchase it.

[@choubakablackscars1664]

J utilise cette colle mais a chaque fois mes lettres noircissent quelques jours après...c du a quoi svp la qualité des lettres?

[@BasinMotorsports]

I never had a problem with mine. I don't know why they would turn black. Have you contacted the manufacturer to ask for help?

[@jorgebarrios2319]

Can I use brake cleaner or do I need acetone specifically?

[@BasinMotorsports]

The instructions specify acetone as it doesn't dry out the rubber. Brake cleaner would probably work, but I didn't try it.

[@tt-rs1457]

@@BasinMotorsports Never, never use brakecleaner. I will leave a resedue and it wouldn't stick.

[@Jelsick]

Back in the day, raised white letter tires were everywhere. Now you have to put them on yourself.

[@BasinMotorsports]

I can remember buying tires year sago and they'd have to ask if you wanted the letters facing in or out. Now, many tires are directional and you have no choice for lettering.

[@Jelsick]

@@BasinMotorsports Its interesting how tire choices have changed. I had a 66 Belvedere, a 67 AMC Ambassador, and a 78 Gran Prix, in the 80s and early 90s. All had white letter tires. Directional tires were unheard of really. These look great on today's performance autos.

[@trillmexicanz]

Just getting ready to do this right now! Great video!

[@BasinMotorsports]

You got this!

[@MyCoreU]

Nice tutorial 👏🏼

[@777tommys]

Great video, gona put some on my tires. Thanks

[@jasonpark5906]

I always use wood screws for a nice snug fit.

[@bigbankrolll]

What do u mean ?

[@GoProHJE]

How long does it last??

[@BasinMotorsports]

It depends on which version you buy. I have the permanent set, and they are 1.5 years old. No issues with mine and they may outlast my tires.

[@PitoCee19]

Does it fall off?

[@BasinMotorsports]

No. They are glued on. No problems in 1.75 years so far.

[@lbmautos]

To offset the cleaning time a tad ima do this the same day i get my wheel&tires mounted.

[@BasinMotorsports]

Good idea. Should be less to clean off.

[@skipdegraff6547]

I'm going to buy raised white letter tires from the factory.... I'm old skool and understand bleach white . We just spray wash the car then rinse soap the tire and finish wax the car and then gloss with tire wet sponge.... The custom is badass but I don't see it lasting the way I abuse my tires

[@BasinMotorsports]

I didn't drive the car as much as I hoped to. They held up for my level of use, and yeah it was quite a job without the filming.

[@scottroe1087]

is your car paint from Dip your car?

[@BasinMotorsports]

No, my widebody is vinyl wrapped in Avery Dennison Satin Urban Jungle.

[@ricoric7968]

Hey how big are your letters

[@BasinMotorsports]

About an inch and a half. They are made specifically for 18" tires.

[@ricoric7968]

Basin Motorsports preciate it

[@skipdegraff6547]

You REALLY gotta want this. That's a 8 hr job then regular maintenance and dude is on a dirt road!!!!

[@g6rida07]

Very helpful 😊

[@randybass5403]

Proline RC TIRE GLUE IS A BETTER GLUE, my stickers have been on my tires for over a year, less over glue,quicker cure

[@kickinitwithlos7800]

Great tutorial very detailed!

[@BasinMotorsports]

Thanks!

[@bigfoot7688]

Awesome video, very thorough! Quick question. How long did it take for your letters to arrive? Thanks!!

[@BasinMotorsports]

I think it was about 4-6 weeks before they arrived. I don't remember it being a quick turn around since mine were custom designed.

[@bigfoot7688]

@@BasinMotorsports Thanks for the quick response you the man!

[@ithanhunt3250]

*WHAT IS THE FONT ?*

[@BasinMotorsports]

No idea. I let the design team at Custom Tire Letters handle it. I just specified the fox head logo, and the tire size. They did the rest.

[@samueldelgado141]

GOOD JOB !!!!!

[@BasinMotorsports]

Thank you. I'm still happy with how they came out.

[@jeremy95ize]

Great video I’m installing today

[@kisoshi898]

Great video.

[@BasinMotorsports]

Thanks!

[@kisoshi898]

Tried finding the adhesive itself on website, can't seem to find it. Must have to buy lettering to get it.

[@BasinMotorsports]

Custom Tire Letters doesn't sell the adhesive separately, but it is on Amazon. I believe I have a link in the description to the bottle on Amazon.

[@thc7632]

Excellent video 💪🏼

[@scottkeene68]

Thank you so much awesome video.

[@kobeplayeddefensetoo1351]

What shops install these on tires? I rather get someone else to do it.

[@BasinMotorsports]

A local custom shop or a tire installer may do it. I really couldn't find a true installer list on Google. The lettering companies don't have an installer network listed. I can only see distributors (Tire Stickers website). You might ask them if they know of anyone in your area.

[@kobeplayeddefensetoo1351]

@@BasinMotorsports Thanks for the info.

[@Wackedgaming]

How are they holding up? and what size did you get?

[@BasinMotorsports]

No issues on them on any tire. They are made for the 18" tire sidewall (you specify tire size when ordering). They are about 1.25" tall.