A NEW Classic - Review of the QSP Worker QS128-x

[@hardrock1826]

I did order 4 Ganzo Knives from Power Cutlery, I had mentioned at an earlier time that I was doing that. Wanted to let you know, I used your code, I appreciate getting a break, Thanks very much. They were all opened with a thumb stud/post, no flippers. That may of had something to do with why they were not opened by Customs. But I got them all, it took almost 4 weeks from point of order. And I really like them, they will look good in my display case. Thanks again for introducing those knives to me. I also ordered and received a nice knife, CJRB from Integrity, it is a flipper. Thanks for your recommendations, I will be ordering more from these suppliers, especially before Christmas.

[@CanadianCuttingEdge]

Glad you got them. I doubt that customs people can tell if a folding knife has flipper or thumbstuds before they open it. I seriously doubt that CBSA agents know that much about knives. I think they have a master list of who the shippers are that they want to inspect, as well as the list of package contents, and the rest is just random selection. Of course they have x-ray inspection but that is where I don't think CBSA agents can really tell the difference between flipper and thumbstud knives on a black and white x-ray. To back that up, I have had a number of knife packages inspected where there were no flippers (They put CBSA tape to seal the box, so it's easy to see if they inspected it or not). I hope all future orders you make also come through without any problem.

[@hardrock1826]

@@CanadianCuttingEdge Yeah you're probably correct about them targeting certain suppliers. But I periodically watch that Border Security show about our Canadian Border Services (reality TV). Sometimes they show them opening packages and they pull out a knife they are carrying, mostly folders. And my my they do have some really nice knives that they carry. Wonder what supplier they get their knives from (wink wink) ? Just saw the one show and they had the cameras in where they do the X-Ray examination of packages in the Toronto Area. I must admit what shows up on that screen, what they can see is pretty good. Like you say, differentiating between a flipper and post would be difficult but they can see that they are knives in there. I am planning on ordering more knives prior to Christmas and I am looking at White Mountain Knives to give them a try. I really do like these Ganzo knives though, glad I got these. I don't know if it's better making orders during a time of the year when they are really busy, like at Christmas. Or when they are less busy. But I won't be leaving any ordering to the last minute or there won't be anything left to order. What I find disturbing is that the Border Services seem to make their own rules and have an ugly on for flippers. Yet I can buy flippers from Canadian Suppliers located here in Canada. I have bought over the years from Warriors and Wonders in Vancouver. Never had a problem with them. One year I couldn't get a particular knife anywhere from any suppliers that I normally deal with in the USA. But this particular knife they had at Warriors. I contacted them and it was very close to Christmas and I was hoping to get it before then. And they got it to me, by mail, in time very fast, at probably the busiest time of the year. I have had a couple of things opened by the Border Services and they stick that tape over everything. I had some items they opened, not knives but camera parts. And it really ticked me off. They stick that tape everywhere and they damaged the boxes that the items came in. I have all the boxes to things like knives, they are worth more to hardcore collectors when things come with nice boxes. Border Services are in need of training when choosing to open packages.

[@matthewadler1329]

Thank you for not calling N690 a budget steel. I can always count on Jake to actually know whats up. This is pretty nice, and something a little different as a modern traditional. QSP does really nice work.

[@CanadianCuttingEdge]

I believe N690 is a step up from budget and I am a HUGE fan of QSP.

[@STUFFWEDO]

Very nice knife. I love the return to traditional, just better. Thank you for a great review.

[@CanadianCuttingEdge]

me too. Check this out: kzbin.info/www/bejne/Znram4NjpdR1lck

[@STUFFWEDO]

Wow! the 003 looks awesome.

[@kidbach]

I watched Arthur Brehm's video on the Ruike LD42B. I dont speak a lick of German but it sounded like he thought it was s good buy. I like the blue scales and bolster just make the Worker pop! The Bohler N690 is more steel than I'd ever need for the cutting that i do, but if i had the money, it would be a "just in case I needed an edc knife for a formal function." Thanks for sharing, Jake.

[@waldmeisterbrehm]

i should make an englisch review on it ;) greetings from cologne, germany! arthur brehm ;)

[@kidbach]

@@waldmeisterbrehm awesome!

[@waldmeisterbrehm]

@@kidbach is this a "yeah, do it!!!" ? ;)

[@kidbach]

@@waldmeisterbrehm please and thank you.

[@hellsbells6380]

@@waldmeisterbrehm a lot of people will love it too. So... yeah!! Do it, please!

[@Alex-hs1uf]

I recently got my first QSP, the Penguin. QSP is making some nice knives. Thanks for the review of this one. ATB.

[@CanadianCuttingEdge]

Very nice! I reviewed the Penguin a while ago, it is a wonderful knife in a more discrete size.

[@Alex-hs1uf]

@@CanadianCuttingEdge It was partly your review that got me to order one.

[@mkris8653]

I agree with "Stuff We Do" below. I think it will be interesting to see what new manufacturers can bring to old favorites. I'd love to see a little brother to this knife too.

[@CanadianCuttingEdge]

I just found out in the last 24 hours that Rough Rider (Smokey Mountain Knife Works house brand) is now making some better end old school folders with micarta and D2 - kzbin.info/www/bejne/Znram4NjpdR1lck So that is another option. I think I will try to get one or two of their new RRR knives once they are in stock.

[@mkris8653]

@@CanadianCuttingEdge I know the ones you are talking about. I really like them, but I have changed my purchasing habits to boycott certain countries. I'll have to wait for a second hand one to come available. Buying second hand is only way i can justify some purchases these days.

[@jmcdermo]

Another knife, another detent problem. Ordered this from Blades Canada and received it today. I can flick it open really easily. With the pivot screws both rotating, I can't seem to tighten it with much authority. Beautiful knife - absolutely love it. But, again, as a Canadian this might qualify as a gravity knife. Stupid law, but this could be seen as such. I am perplexed - I specifically ordered this thinking I would never have a problem with this model. Clearly this a tool, but I can flick it open with my wrist sometimes.

[@CanadianCuttingEdge]

If you don't return it you could send it to me, I think I could probably get it to work well for you. I often fix soft detent knives so that they don't violate the current interpretation of the gravity and centrifugal knife laws. email me if you are interested - CanadianCuttingEdge AT gmail.com

[@locationjason7299]

Very detailed review. Excellent work.

[@CanadianCuttingEdge]

Thank you kindly! I think details are important. It takes a lot more time to make a video with all that detail but I think my viewers deserve to know exactly what they are contemplating to buy.

[@franksalem8580]

I bought one in snakewood and love it. With a little practice you can open it easily with one hand.

[@CanadianCuttingEdge]

Yes, the action is smooth enough that it opens easily enough to do that for me too. Thanks for mentioning it.

[@ataleph1]

Jake, l would only add one comment to what you have said (especially you are right regarding the thickness behind the edge, n690 can withstand 0.4mm and below assuming good heat treatment of course ). So that is about the lock. In my opinion on such a knife the only situation where you are going to need a lock is whittling or similar type of job where the blade gets stuck in the material when you are pulling it back after doing your cutting motion. To fight back this issue you need a lock indeed but not really as strong as a back lock. This knife could benefit from having a mid lock instead, allowing for much easier one hand closing (especially given such good mechanics). Actually one more thing - on a WORKER (gets dirty by definition) washers make much more sense than ball bearings, but of course to get same performance with washers would cost many more $$$. Otherwise really like the knife (classic design that can be taken apart!). Thanks for the video!

[@CanadianCuttingEdge]

I agree with the points you are making. I am sure that if it was a mid-lock then there would be some people asking for it to be a back lock. We humans are like that. :) You ended with a benefit that I failed to mention. It can be taken apart if the need for a deep clean ever comes up - that can make it worth it right there.

[@davewoods8717]

that is a GREAT looking knife. If that leather case was black as well -it would be a have to have for sure... Great video Jake; thanks!

[@CanadianCuttingEdge]

Yeah, black would be better, but leather can be dyed darker without too much fuss.

[@tonyhoodlass1846]

Just got mine green jigged bone and stickers well pleased

[@CanadianCuttingEdge]

Very nice

[@Brye29]

Awesome vids keep em coming and as a fellow Canadian thanks for the WMK info as always

[@CanadianCuttingEdge]

Thanks! Will do!

[@bmoviebmovie]

Nice knife worth considering. A ball-bearing, slip joint....something I don't have!

[@CanadianCuttingEdge]

Well, it's not a slip joint, it is a back lock knife. But it sure is nice.

[@blueclothes1]

You’re right it’s not an intimidating looking knife but I really like pocket knives that has a prominent belly 🤓

[@CanadianCuttingEdge]

I like a big belly too, but I also like a flat belly. I think I Like a big belly more, cause that is what I have.

[@asheddie]

Hi mate, any idea what style of spring it has? Rod tension spring? Cheers, Ash.

[@CanadianCuttingEdge]

Email me and I will send you a picture of it taken apart. i get a lot of emails so be specific for what you are asking so I can more easily remember. CanadianCuttingEdge AT gmail.com

[@roldatanir8520]

I love the knife, I think i'l be good for whittling.

[@CanadianCuttingEdge]

Which handle option do you like the most?

[@roldatanir8520]

@@CanadianCuttingEdge Wood

[@roldatanir8520]

@@CanadianCuttingEdge wood scales

[@hoogaba]

Typo In description I think with your discount sweet review !

[@CanadianCuttingEdge]

Thanks for commenting about that. I do wish you could give more detail, I am not sure where the typo is. the WhiteMountainKnives.com discount code is: CCE If that's not what you are talking about please post a new comment - cut and paste the error so I can figure out what you mean and fix it.

[@hellsbells6380]

Is it possible to buy them directly from china? The stores cited dont ship to my country... Thanks!

[@CanadianCuttingEdge]

I don't know if they are sold from China. I will contact my representative from QSP maybe they will know. It would help me to know what country you are in. please email me because replies to replies are hard for me to find because KZbin doesn't make it easy for KZbin channel owners to follow individual conversations, instead I just see new comments. I guess you could make the comment over again but add your country, or email CanadianCuttingEdge AT gmail.com

[@hellsbells6380]

@@CanadianCuttingEdge Thank you very much. I'm from Brazil and you have some followers from here. I will do a new comment too.

[@hoogaba]

Hi Jake, Just confirming if this is an error : "You will get 10% off the regular price of $76.95 to $84.88 when you check out with coupon code: CCE (it works for everything WMK sells)" Shouldn't it be like 69$ if the original price is 76 or was the orignal price 84 and its going down to 76? Thanks again for your review videos!

[@CanadianCuttingEdge]

I am sorry for the confusion with the wording. "the regular price of $76.95 to $84.88" means that those numbers are the regular price of the knife - depending on which handle version is chosen. The 10% savings comes off the regular price. $76.95 minus 10% = $69.26 (rounded up the nearest penny)

[@hoogaba]

@@CanadianCuttingEdge Oh got it! thanks

[@skcamerican]

The green bone always looks like a pickle. LOL. Nice looking knife, beautiful blade shape - but out of my budget range. Rough Ryder work knives for me!

[@CanadianCuttingEdge]

Have you heard that Rough Ryder is now putting out some of their knives with D2?

[@skcamerican]

@@CanadianCuttingEdge Yeah. I’m too poor to go for the RR Reserves and the higher end ones, though. And I’m not really a knife addict. Yet. Really. I think. So I’m pretty happy with the usual RRs. I have a Dog Bone Jack that I love. I’d like to get hold of some sold-out ones - the Cowboy Cutter, and that micarta work knife that sold out so fast, and that ridiculous thing with the wrench sticking out the butt, mostly because it’s so goofy. Hope they do another run!

[@gammonsandwich1756]

Again I do just wish they had made the pocket clip ambidextrous. Please knife makers, don't forget the 10 percent of us who are left handed. Thanks!

[@CanadianCuttingEdge]

I am left handed too. I have come to conclude that knife companies just simply will not cater to lefties much of the time. So I tried hard to get used to R handed knives carried from my left pocket. I can deploy the blade and have it at the ready just as quicklly from either side pocket. BUT - I also forced my self to become ambidextrous, mostly because I was the youngest of 4 brothers so all the hand me downs I got for any sport were R handed and my parent's didn't have enough $ to buy new stuff just for me. I learned how to make it work. I know that I'm unusual and that's not always possible for every leftie though.