Canon Printer Alternate Blinking Lights Power and Error || Canon G3000 printer reset 5B00 5200

[@drrashmi15]

Wow thanks

[@Parvinder_Singh]

Welcome 😊 Subscribe, share and like

[@samar26]

Wow.. it just worked with my printer. Saved rs 2000 .. pls make more videos on the common problems of inkjet printers..

[@DilbandhuChelak]

Very nice paji❤❤

[@Parvinder_Singh]

Thank you Please subscribe, share and like my channel !!

[@nakulbansal9986]

Thanks 🙏 It was useful for me

[@dilipsamant1901]

Hi Parvinder, I have Canon Pixma MP280 printer. Orange and Green lights are flashing alternatively 8 times. I tried resetting as per your video but it did not work. For your information, recently I have properly cleaned ink absorber properly, fitted everything back. could you help as this 8 times flashing of lights was happening before and after cleaning of ink absorber. Thanks

[@Parvinder_Singh]

Hi Dilip Samant, basically these are idicators that shows that your cartridges are not properly fitted

[@vineetkhunger]

This worked, thank you!

[@Parvinder_Singh]

Great. Please share and subscribe to my Channel!!

[@pk-xr6rt]

Thanks a lot...it worked..

[@Parvinder_Singh]

I am glad to help. Thank You!!

[@ashnaik777]

Tnx bhai

[@Parvinder_Singh]

Glad to help!! Please share, like and subscribe

[@SAGINELA123]

supper sir

[@Parvinder_Singh]

Thanks 🙏.... Do let me know if there are any gadgets you need to know about!! Do share and subscribe!! Thanks Team Gadgets Agile

[@RajKumar-yc1qx]

Any offers currently going to purchase a Canon Ink Tank printer ?

[@Parvinder_Singh]

Yes Amazon is offering multiple offers. I will share the link

[@sushantibhuinya3386]

👍

[@parthaj33]

Even after doing these steps if the problem still shown the same alternate blinking problem what to do

[@Parvinder_Singh]

In that case first remove the heads from printer, clean them with some spirit or alcohol and let it dry, then reset the printer. After that do deep cleaning via laptop software ( this will consume lot of ink) And then try, if still not working then your printer heads have hardware issue. Then call Cannon engineers for replacement.

[@soni745]

Bhaiya apne jo bataya maine waise kiya per light abhi bhi blink kar rahi hai

[@Parvinder_Singh]

Try to place the injectors properly, hope it helps

[@RanjeetSingh-ru9qt]

3 times yellow light blinking not solve the problem what can i do please help

[@Parvinder_Singh]

Which model do you have?

[@Rishav-v2y]

Paji wha

[@Parvinder_Singh]

Thank you

[@shefalisrivastava8873]

If by doing same error is not solved than what to do

[@Parvinder_Singh]

You can see my one more video in my channel for printers. Clean the heads with spirit and then reset, and finally deep clean via computer. Hope this helps

[@narottamnayak4160]

G3000 B202 PROBLEM SOLUTION KEYA HE?

[@Parvinder_Singh]

Sir, iska matlab hai ki aaapke printer heads tak signal nahi ja raha, aap ek baar heads nikaal ke clean karein and dubara theek se fit kariye.

[@asirbadbehera1206]

7 times alternative blink orange & Green light how to resolve it.

[@Parvinder_Singh]

Hello, thanks for watching my video. Really thankful to you. Please help to subscribe and share. Kindly let me know which model of printer you are using

[@saurabhverma3999]

canon g3000 printer orange light blinking 22 times plz solve problem

[@Parvinder_Singh]

Hi Sir, your paper is jammed.... You can see my another video in which paper is jammed on my channel. Please Subscribe, share, ike and support my channel Thanks

[@the6pmclub29]

while foing the first step ...after a while yellow light is blinking

[@Parvinder_Singh]

Make sure to restart your firestick from back. So that it goes in scanning mode

[@raghubhat89]

10 times blinking, ink is available in the tank, what to do?

[@Parvinder_Singh]

Hello Sir, which model do you have for Printer. Please let me know.

[@raghubhat89]

@@Parvinder_Singh sir, its canon g3000

[@Parvinder_Singh]

@@raghubhat89 this means - An error requiring a repair has occurred.

[@punatanii278]

​@@Parvinder_Singhis this problem related to hardware? 10times blink ink is full..

[@uubadshah]

Same problem bro...10 times blinking...what to do??

[@amitkumarmaurya586]

g 3000 printer me green and orenge light 3 time

[@Parvinder_Singh]

Have you checked paper jam in printer, do proper cleaning and reset it, alao clean the injectors

[@Apansagalekhau]

Agar orange light blink na late to

[@Parvinder_Singh]

Kya error aaa raha hai aapko?

[@Apansagalekhau]

Wahi 7 time error but solve nhi ho raha

[@Parvinder_Singh]

Sir aaap heads ko check karo.... Wou theek se nahi lage hue.... Theek se laga ke reset kar do Subscribe, share and like my channel

[@LATHALATHA-pl9ve]

Bro it's not working for me bro

[@Parvinder_Singh]

Hi, did you try all the steps? What is the issue you facing

[@sandipbhavre7915]

10 time blink kr raha hai sir

[@Parvinder_Singh]

Aaap check kariye, front tray set hai ki nahi theek se!! 10 times blinking ka issue tabhie aaata hai

[@Parvinder_Singh]

Do subscribe and share the channel!!!

[@darshmanju]

Didn't work

[@Parvinder_Singh]

You try to clean injectors.... I have other videos on my channel for printer... Please visit and let me know if it works, else i Will research more on it Please subscribe and share my channel... I put lot of efforts for my youtube family

[@kunjanparashar3254]

Thanks sir

[@Parvinder_Singh]

Glad it helped... Do share and Subscribe to my channel