Yesssss. That would be just about the perfect length and it hold 12 rounds
@brianmurphy70926 жыл бұрын
Hmmm I'd take a sling fire stock cut it and attach it to the lawbringer stock so you'd have a tad more comfort along with looks what you add this idea to is up to you I have put a sling fire stock on the rough cut it's great and good lookin
@thr335ix74 жыл бұрын
Done it and I love it
@infernolukegaming32122 жыл бұрын
I love it
@meroastisruined30396 жыл бұрын
*sees judge in thumbnail* well, good luck trying to open that
@CaptainXavier6 жыл бұрын
It was actually fairly easy...if time consuming...
@meroastisruined30396 жыл бұрын
Captain Xavier was expecting it to be assembled, but luckily not
@CaptainXavier6 жыл бұрын
A fact you would have known...if you had watched the video before commenting...which is KZbin etiquette 101... :P
@meroastisruined30396 жыл бұрын
Captain Xavier I suppose so, but in my comment I said "sees judge in thumbnail" so I was judging it by the thumbnail (pun intended lol).
@Draftsman_MC13006 жыл бұрын
I love your expression as you look up and smack the camera with the spring. 🤣🤣🤣
@ProfessorPhysics26 жыл бұрын
Hey Xavier, if you have a broken Apollo, you can use the 3rd gear (preferably the new metal one) as a lovely replacement for the weak plastic one in the Judge :) I wasn't sure if the Judge could take a K26 but thanks a ton for confirming it for me!
@RosyRecluse6 жыл бұрын
Someone need to try this... give the judge a real upgrade without adding a compressor system inside.
@Isheian6 жыл бұрын
LoonShy Honestly, a xbz or Titan with a compressor or hpa is worlds better than a spring upgrade
@tomaso2025 жыл бұрын
Do you know if I can get a K26 in my stryfe
@gabrielkillian51114 жыл бұрын
Tomaso your joking, right?
@dogdog3572 жыл бұрын
@@gabrielkillian5111 Nah, he's completely serious. He's going to give it the heaviest trigger pull ever, or a hefty mag retention
@jacobesperanza64526 жыл бұрын
The little foam seal that connects the cylinder and the plunger tube on my lawbringer got destroyed, so i cut up a dart flattened it with a hair dryer and superglued it on, somehow it worked (i found this funny for some reason)
@jonathangates89066 жыл бұрын
Just as a FYI, the widened part of the spring in hammer primed blasters is what goes towards the bottom, as its what stops the spring from pushing out the bottom.
@thefyingfist6 жыл бұрын
Love the new intro!
@CaptainXavier6 жыл бұрын
:D
@Nate-sq7mw6 жыл бұрын
same i love it and i strangly laughed at it a bit dont know why
@tristenmontey36276 жыл бұрын
He should put a k26 on a maverick
@CaptainXavier6 жыл бұрын
I tried...like...50 episodes ago. It cannot take one.
@aiden7136 жыл бұрын
Hah best intro ever....LOVELY!!
@CaptainXavier6 жыл бұрын
:D
@snakefoolery21776 жыл бұрын
The LawBringer looks like the grenade launcher for the Demo in TF2
@rueseki61214 жыл бұрын
demo but he's a cowboy
@thr335ix74 жыл бұрын
WhyAmISoBored *ka boom*
@scottsweeny66474 жыл бұрын
Na it looks like the lawbringer
@Dreadballoon4 жыл бұрын
WhyAmISoBored yeah!
@buddysgarden3 жыл бұрын
yes
@CalebDoesStuff6 жыл бұрын
Love the new intro! This episode was very helpful because I just got the Judge. I’ve been thinking if it could take a K-26 for a while now! Great video cap!
@jrdi35746 жыл бұрын
New year, new intro! Absolutely fantastic!
@BishopGantry6 жыл бұрын
It didnt spring to mind youd change the intro, just lovely Yes pre and post mod range and velocity tests!!!
@Lumini-36 жыл бұрын
Fun fact: you can double the Hammershot's spring using an "Elite" Jolt spring. It makes the blaster shoot faster, although I don't know by how much
@zeroblade65996 жыл бұрын
New intro, sarcastic comments, big blasters. my year's off to an awesome start
@Mildcat7436 жыл бұрын
Big fan of the new intro, as well as the science part of the Lawbringer verdict, it adds a nice level of fairness when you know the outcome.
@CelticViking576 жыл бұрын
Awesome intro cap. Your face when u look up to the camera was hilarious
@CalebDoesStuff6 жыл бұрын
I love the chronograph facts!
@hugoyoung48906 жыл бұрын
Nice to see the fruits of your labour with a new spring bin.
@Old_Snake136 жыл бұрын
Nice Vid Cap. On the topic of cosplay and the judge... I plan on painting one up for Mrs Commander so she can use it for a Bombshell Harley Quinn costume.
@CaptainXavier6 жыл бұрын
NICE!
@boba-fett8316 жыл бұрын
Love the intro!
@valerielastname95086 жыл бұрын
I believe that spring for the Lawbringer was a Strikefire spring, or at the least the same dimensions as one. I have a Strikefire spring myself, and it seems to be identical.
@ryanwarrener67606 жыл бұрын
THE NEW INTRO IS JUST SPECATACLER
@canny246356 жыл бұрын
The Longshot front gun spring works really well with my hammer shot
@scottjs52075 жыл бұрын
I have one of those..... thanks!
@iceybobster6 жыл бұрын
Love the intro, watching it over and over again
@sir_goofs94566 жыл бұрын
Favorite part is the new intro excellent job
@Lumini-35 жыл бұрын
Jolt Springs can fit outside the hammershot's spring and it makes the draw weight noticeably heavier
@Paperguide1526 жыл бұрын
THE NEW INTRO IS HILARIOUS
@owenkennedy32156 жыл бұрын
I was not expecting that intro oh my god. I love it.
@MrTKHolmes6 жыл бұрын
New intro is perfect!
@snorribjorn50746 жыл бұрын
Like so many others, I like the new introduction. Excellent work as always!
@CaptainXavier6 жыл бұрын
:D
@thomjames666 жыл бұрын
I'm breaking the rules but I'll risk it, liked the new opening and the new what can it take, I have the recall of a goldfish now on with the merriment!!! props to spell check for dropping the y and adding the i!
@CaptainXavier6 жыл бұрын
What rule are you breaking? The don't comment until finishing the video? Compliments are generally ok since they are not things that are likely to be effected by later content. Generally it is questions or corrections or suggestions that are the issue. :)
@beriorgar6 жыл бұрын
cool new intro! i also liked how you went a little more in depth with the lawbringer. so yeah, i like this improved format
@ObbyCloud6 жыл бұрын
New intro is great! The look on your face is just perfect.
@ZachsYTUBE6 жыл бұрын
Nearly died laughing at that new intro 😂
@CaptainXavier6 жыл бұрын
:D
@Isheian6 жыл бұрын
Seconded
@TytonidaeIndustries6 жыл бұрын
i would love to sea just a compilation of all your various intros
@DeisFortuna6 жыл бұрын
The judge is the perfect meme gun. Also, if it's possible to mod it to take sledgefire shells instead of having to manually reload all 30 shots, that would probably make it far more practical. (Assuming you also made some kind of button or mechanism to quickly eject empy shells, like ejecting them when the shell rotates past the firing position)
@notforsaletoday18956 жыл бұрын
Ooohhhh Cap, I love the new intro 😂
@MexicanWaffIe26 жыл бұрын
that lawbringer upgrade spring may have been the longshot front pump spring
@PerfectRequiem6 жыл бұрын
I wonder if there's a type of sturdy label you can apply to springs and mystery parts so that the source is marked when you go to use them again later?
@CaptainXavier6 жыл бұрын
+PerfectRequiem I have started doing this actually. But too late to help here.
@jamessaylor30896 жыл бұрын
I was actually just tearing apart some goodwill finds for parts today, and among them was a Tek 6. Dig up one of the many stock Hammershot springs I have laying around, and as it turns out the Tek 6 spring rests snugly around the Hammershot spring, the internal diameter being exactly the same size as the external diameter of the widest coil of a Hammershot spring. I am not currently able to test it to be 100% positive, but I’d put down the $1.50 I paid for the Tek 6 that it would work.
@CaptainXavier6 жыл бұрын
Nice! The rumors are confirmed! Thank you!
@jamessaylor30896 жыл бұрын
Captain Xavier, I just compared the spring combo to some Hammershot internals. It looks like it would work. However, personally I’d add a larger washer of some sort as the Tek 6 spring is almost over the edge of the support and could, in time, slip over and fail. It would definitely be a heck of a spring upgrade though.
@SofaPop.6 жыл бұрын
Could you make a blaster that fires K26? And can that blaster take a K26?
@BoldBeardedMiddle-agedGuy6 жыл бұрын
Awesome intro!!!
@NoBoDipReMiuM5 жыл бұрын
When the judge came on the table i heard a very quiet...yesssss
@1188duneman6 жыл бұрын
Orange Mod Works 8kg spring works beautifully!
@philipsmith8026 жыл бұрын
Modulus line = inspired by the attachments from Call of Duty Zombiestrike line = CoD Zombies Doomlands = Fallout + Red Dead Redemption Rival = Super Monkey Ball Alien Menace line = Halo??? Impact Zone = the obligatory ice level Hasbro knows how much money video games make.
@randomness11756 жыл бұрын
I minimized my law bringer and I will tell you it is definitely oversized but with a spring upgrade it's worth the bulk
@CaptainXavier6 жыл бұрын
Nice!
@abquintic6 жыл бұрын
Possibly that spring came from a Rey/Han Solo blaster?
@darrenjacobson74566 жыл бұрын
So... you added a stock to a hammershot, and now you're removing the stock from a Lawbringer? What the heck is going on in your head?
@CaptainXavier6 жыл бұрын
+Darren Jacobson madness! That us what! I will, of course, make the stock from this into a standard stock. Then I will put a stock attachment point on my minimized Lawbringer. And then I will be able to put the stock BACK ON! MWUHAHAHA!
@hermanlai60356 жыл бұрын
woah so meta
@stevenpeven2582 жыл бұрын
I suppose if you could get your hands on stronger replacement parts for the judge internals, you could possibly get a stronger spring in there
@0ptimusv0ltr0n6 жыл бұрын
For some reason I like the look of the judge without the extra shell. Maybe attach a jolt to one side and a bigshock to the other.
@insimniac6 жыл бұрын
Hey I was wondering if you could make me a minimised deploy so I can finally like the thing
@fletcherclausen43496 жыл бұрын
in one of your vids (I think the toy story k26 vid) you had green balls but did no know what they were called the are "Ballistic Balls" Here are some Attachments for EIR 1- single boom co 2- 3 boom co 3- 6 boom co 4- nerf nitro 5- Ballistic Balls 6- Zing Firetek Rocket 7- molle 8- dude Perfect arrows 9- Faux Bow arrows 10- rebel / zomstrike arrow 11- Xploderz 12- Tek Recon 13- Vulcan ammo belt 14- Zing Air Z-ammo Suction Cup Arrows 15- Hog Wild Power Popper
@RoryStarr6 жыл бұрын
I like the new intro. I liked the old one, but it was due for a change.
@CaptainXavier6 жыл бұрын
Way over due. I plan to have a different intro for each major series.
@christianbarnes89316 жыл бұрын
loveing the new introa
@snooobz25456 жыл бұрын
I *love* the new intro
@CaptainXavier6 жыл бұрын
:D
@Jimmytoehandle6 жыл бұрын
Oh yeah it does dig into your hand
@helpdeskconfessions6 жыл бұрын
I wonder if you can turn the Judge into something akin to a mortar. I know Walcom turned it into a bazooka revolver with a compressor, and with the weight, I don't see a benefit to holding it all day.
@Isheian6 жыл бұрын
On the lawbringer, you can double up hammershot/lawbringer springs.
@spazzofspeed6 жыл бұрын
Sick new intro, Cap!
@jcj94brony6 жыл бұрын
If you could figure out a spring powered, magazine fed, automatic blaster, you'd have made my heaven in Nerf form. I've got a few concepts rolling around but they all use monster sized shells to act as the mechanism for firing the darts, which - while it works fine in theory - leads to seriously low FPS readings without even *larger* shells. Having said that, I'd settle for a tube mag blaster that doesn't suck.
@CaptainXavier6 жыл бұрын
That would be the Stampede...
@hell59286 жыл бұрын
What a coincidence Captain a week ago Goodwill brought mine.. You can keep the judge I'll bring the Law. Almost 10 kg of spring without upgrading the catch spring.Where was this video a weekend ago when I was studying Law.
@CaptainXavier6 жыл бұрын
:D
@jameskirkland69166 жыл бұрын
The lawbringer in my experience has less sturdy internals than the hammershot, but I would still try the mod I do for hammershot here. I take two stock hammershot springs and twist them together for my spring upgrades. It is significantly tougher than an 8 kilo spring, and I have never had an issue with catching. The only caveat is for that for the love of all things sacred, do not dryfire it.
@austinm45606 жыл бұрын
cap, you can double spring hammershot, but to let you know, when i tried priming it with double springs when the shell was open it did not catch but when i closed it it will work fantasticaly
@BryanWasHere896 жыл бұрын
Nice surprise. I want a Lawbringer of my own someday. Also, I had a thought. The Judge has a lot of dead space in the revolver section. What if you were to make a smaller (maybe only 4) Sledgefire shell revolver for an air blaster attachment?
@Luke-ko4qo6 жыл бұрын
Loooooove the new intro
@CaptainXavier6 жыл бұрын
:D
@bobthegaminggod25643 жыл бұрын
I just had an amazing idea. Take a judge make it motorized, cut off the handel, and make it arm mounted. Shield shotgun.
@1Scimetar6 жыл бұрын
No idea if a tech-6 spring would work for supplementing that of a hammershot, but the one I have is the same diameter as the standard N-Strike Elite springs that are found in stock retaliators, rampages, and EAT's
@astergen69204 жыл бұрын
The law ringer is my favorite rifle
@ashleyl38616 жыл бұрын
Love that intro!
@alexelliot24435 жыл бұрын
I found a k 26 (14 kg) spring at home Depot
@Telemachus28146 жыл бұрын
Have you guys ever played a game where your blaster/weapon can "break" by being hit by rounds? P.S. I love the new intro.
@CaptainXavier6 жыл бұрын
+Telemachus2814 not that I know of.
@zeroblade65996 жыл бұрын
But that would finally give a reason to use the 40 jolt body armour loadout
@musaaydogan42926 жыл бұрын
I don't do that but what I do is that once it gets hit by a round you have to take it to the mechanic to repair it which takes 30 secs
@Telemachus28146 жыл бұрын
That's actually pretty interesting. So you can get your weapon "broken" but have it be fixable once you get to the mechanic.
@musaaydogan42926 жыл бұрын
Telemachus2814 thanks I have only been doing it for a couple days so I just invented it
@kiritoblackthedemon65866 жыл бұрын
That intro 😂😂😂😂
@CaptainXavier6 жыл бұрын
:D
@LUCHATHOR136 жыл бұрын
I cut a small section of 1/2 inch cpvc and used that as a spring spacer in a hammershot.
@CaptainXavier6 жыл бұрын
Sure...if you want to be cheap about it. :P
@LUCHATHOR136 жыл бұрын
Captain Xavier it was the curators hammershot. :D Hahaha!
@adamvanleeuwen31046 жыл бұрын
that is cool! nice channel!
@CaptainXavier6 жыл бұрын
Thanks!
@KerinKoure2 жыл бұрын
I believe that half compression doesn’t damage the spring the only reason why leaving the blasters primed damages it is it’s it it’s apex compression which is what causes strain
@lastwymsi6 жыл бұрын
I LOVE THE NEW INTRO!!! You should make varients of it and swap them in and out each episode.
@CaptainXavier6 жыл бұрын
That plan is to have different intros for each regular series.
@EDSKaR6 жыл бұрын
Is that.... is that a rapidstrike in the intro? Filming in advance of the next April fools video? The Lawbringer stock is woefully too short for even a child, but I REALLY like the idea of a revolver rifle/revolver carbine. I want to get my hands on one so that I can extend the stock, maybe with a slingfire stock (BECAUSE THAT ISN'T THE OBVIOUS ANSWER ¬.¬) But I do really like the look of the Lawbringer barrel. Every time I think about how to improve the The Judge, I always end up with a lanard triple shot. Either that or some hyper complicated sledgefire shell ejecting monster... that looks like a lanard triple shot. I like the new format, let's see if it's popular!
@brianmurphy70926 жыл бұрын
Screw the spring Imma jus put washer sooooo much pooooooooooowwwwweeeerrr
@scarletsurge56246 жыл бұрын
if you want a noticeable difference doublestrike spring in the lawbringer or any hammer prime blaster so far and get it or you could put in 3 springs from the shotgun pistol knock off thing youv already tried for K26 to get over 100 fps (if you upgrade the seal and all that)
@jakedumanphotos6 жыл бұрын
🤣 I about laughed like an hour and watched it about like 30 times but nice intro
@gazashotshell90996 жыл бұрын
It would be cool to see all the blasters that could and couldnt take the spring in different piles to compare the ammount
@Daonehelios6 жыл бұрын
You captain Xavier
@CaptainXavier6 жыл бұрын
You Ghostly Fire
@viiem28766 жыл бұрын
you Captain Xavier
@j.evanroy46836 жыл бұрын
For the sake of all things modular, could you mod a Lawbringer for the stock and front barrel to be removable and compatible with the N-Strike stuff?
@jetaviator1586 жыл бұрын
Love the intro cap
@CaptainXavier6 жыл бұрын
:D
@chatotalks53256 жыл бұрын
I wonder if the BOOMco crank force (the BOOMco gun with a spinny crank on the right side) can take a K26?
@ethanellard90575 жыл бұрын
hey Cap, i was wondering if you could take a look at some cheap airsoft springers (ukarms as an example) and see if any of those springs would be compatible/ viable for Nerf?i think that would be a cool video/ experiment
@aayushyularen88826 жыл бұрын
first k26 video was published november 2016. wow
@larce41586 жыл бұрын
From my own experience, adding a knock-off Jolt spring to my Sweet Revenge together with the stock one, and it got a nice boost. Maybe the spring that you put in it is something like that? Edit: I'm talking about the spring you added to the Lawbringer.
@joshua54836 жыл бұрын
The Judge looks like a nightmare to get open
@CaptainXavier6 жыл бұрын
It is.
@radioactivesdesigns35546 жыл бұрын
Great work as always. Always love watching these. But.. Heres a series idea.. Can it take a k12?
@whuttontarnation24846 жыл бұрын
Yay
@doodlebanger45746 жыл бұрын
12:12 HOLY HECK!
@Bread_Lord3 жыл бұрын
So I just remembered the nerf overwatch things exist
@brianng97656 жыл бұрын
i've just recently subscribed to you, so i didn't look through all your videos yet. but have you tried to put a k26 to vortex blaster? and btw, what's so special about the k26? i'm from the airsoft community, still new to nerf blasters
@CaptainXavier6 жыл бұрын
Yes, I covered Vortex Blasters. They cannot as they do not use compression springs. They use torsion springs. And K26 is strong, cheap, and fits in lots of Nerf blasters.
@hunzhurte6 жыл бұрын
the new intro is a nice detail
@hunzhurte6 жыл бұрын
wonder if it is just for this serious cause that would make sense.
@CaptainXavier6 жыл бұрын
It is. I plan to make a new Intro for every major series.
@hunzhurte6 жыл бұрын
That's very nice. By the way I am watching your videos from Germany so greetings from the Bratwurst-Country!👋
@shadowsa2b6 жыл бұрын
just cus its new, can the TriBreak take a k26? if for no other reason than i want to see what looks like on the inside
@logankunkle10396 жыл бұрын
Captain xaviar you don’t need to work about chopping the law bringer cause they already did it for you with a different blaster
@CaptainXavier6 жыл бұрын
+Logan Kunkle the Negotiator only holds 8 rounds so it is no better than an upgraded Hammershot. I want the 12 rounds.
@logankunkle10396 жыл бұрын
Captain Xavier very solid point and thank you for making entertaining videos and very helpful tips on making my blasters a lot better
@CaptainXavier6 жыл бұрын
:D You are welcome
@jilliankatz31845 жыл бұрын
nice video
@adamwilson31046 жыл бұрын
Captain! I'm planning on steampunking my judge this week, but I'm debating on if i want to make it semi-war practical or not. With k-26 do you think it's worth it to brass the 30 barrels of the judge?
@CaptainXavier6 жыл бұрын
I doubt it. I would be surprised if it would even be able to fire, honestly. Maybe a partial brass barrel. But it was so weak I would be worried about it not having enough power to clear a brass barrel at all.
@chrisseng59176 жыл бұрын
Are u able to turn the judge in to a semi auto with fly wheel?