CAR DECALS | This is why you must know which transfer to use and when to use it

[@RDIdecals]

OUR LINKS: RTAPE TRANSFER: amzn.to/3QXg7PR APPLICATION ROLLERS:amzn.to/3L0vtPX ORACAL 651 VINYL: amzn.to/45CuP34 GRAPHTEC VINYL CUTTER CE7000-60: amzn.to/3subOBE CAMEO 4: amzn.to/45JvZdc CAMEO PRO 24 INCH: amzn.to/3OVTp8t CORELDRAW SOFTWARE: amzn.to/3EgwP5e RAPID TAC:amzn.to/44x4x18 REPOSITION MAGNETS:amzn.to/3qMJ3zu CUTTING KNIFE:amzn.to/3QX0LuN SQUEEGEE: amzn.to/3QVadie NEW KZbin CHANNEL: kzbin.info/www/bejne/bmLNmqqIrLGMi7M

[@DesignCutters]

Nicely done guys! Having seen the paint condition on the back doors (from someone removing other lettering improperly with a straight edge razor blade), I would have covered that whole section first in white vinyl, then put my blue lettering on the white vinyl. It would not have added very much material cost but would have made it look nicer.

[@RDIdecals]

Thank you! That sounds like a great idea, fortunately we didn’t have to remove the old letters, we only tried to remove the adhesive. Adding a white background sounds like a great idea too! Thanks for supporting our content!!

[@spro957]

Brilliant video guys. I am learning a lot from your channel. From UK 🇬🇧 💯👍🏼

[@RDIdecals]

Thank you mate cheers 😃👍

[@MA-bx2ev]

Which one is more popular on cars and trucks, GLOSSY or MATTE vinyl and why? Which one do you recommend? Thanks

[@sotosbrother9389]

Does the at75 transfer tape ship well ? If you ship a customer a vinyl decal ?

[@RDIdecals]

Hello! So far AT75 has been the best option for shipping out decals. Just a reminder, AT75 is the same as AT75.1

[@LHommeDeParfum]

Very helpful video. Rtape is quite difficult to find here in Europe. Any Orafol equivalents to At65 and At75? Cheers

[@RDIdecals]

I’m sorry but for Europe I wouldn’t know a brand close to Rtape 😔

[@LHommeDeParfum]

@@RDIdecals Thank you Sir. After some reearch I found that ORAFOL have their won transfer tapes labelled LT, MT and HT MT95 (Light/Medium/High?). According to the datasheets, looks like Rtape Clear Choice AT75 would be closer to Orafol MT95. I will try that of I don't find RTape. Cheers again for your helpful videos.

[@xxcunninxx4882]

nicly done!

[@Iwanttolearn23]

How do I get in contact with you guys ? I would like to ask more questions but not here

[@mikepi660]

Thanks guys

[@RDIdecals]

Our pleasure!

[@aus-rider]

Looks good guys 👌

[@RDIdecals]

Thank you 🙏

[@sotosbrother9389]

Is at75 the same as at 75.1 ??

[@RDIdecals]

Hello! Yes it is.

[@sotosbrother9389]

@@RDIdecals on the website it says the at65 is now considered high tack ? What’s the best price to get those transfer tapes ??

[@savannahbrown570]

I keep having problems where the tape will not grab my decals no matter if I have my force down or not and blade depth at its lowest please help me

[@RDIdecals]

We had that problem before most likely the transfer is a very low tac or the weather when it’s too hot or cold the vinyl won’t stick to the transfer that is why we use high tac transfer like the AT75

[@mmdz7459]

How much did you charged for that?

[@RDIdecals]

$680 because it was an intricate project and we used 38 square footage of material and 3 hours of labor that is what our DECAL CALCULATOR gave us as round up number

[@mmdz7459]

@@RDIdecals muchas gracias muchachos bendecida semana.

[@RTCDigitalS]

​@@RDIdecals $680 usd?

[@evolved46]

Greetings from Romania.

[@RDIdecals]

Greetings and thank you for your support 🙏

[@bossfootbagstwo2078]

It’s called a door hinge…

[@RDIdecals]

Thanks a lot 😅

[@bossfootbagstwo2078]

@@RDIdecals No problem…