Car stuck in park | Mercedes Shifter Repair / Fix

[@undertakerfire7810]

Wow great that you did this on your own!!👍 the dealer loves to charge ridiculous prices... I am a huge fan of these era S and CL class Mercedes Benz, but I wouldn't call them vintage just yet!😄 lol

[@Turbo_Snail]

You are right. It’s not really vintage. It’s just, the car is only 3 years younger than its owner. That’s pretty old. Either way we love the car and we saved almost $3000 so far doing various repairs our self. There are more videos to come including spark plugs and blower motor. Thanks for the kind words! :)

[@steveosman4992]

I had same problem with my 2004 S430 shifter stuck in park but I got lucky . I was ready to start ripping everything apart when the car battery died and had to replace with a new battery. after I installed the new battery guess what? the car was shifting again. apparently on those cars once the voltage of the battery drops to 10 V or below , the transmission locks up and won't allow you to drive the car to protect the transmission. so if you had a similar problem, check the brake switch first if OK check the battery voltage and if OK then take the shifter apart to replace a broken piece.

[@Turbo_Snail]

That’s a good tip. In our case. The plastic part was broken in two.

[@lawrenceharrell508]

You are absolutely right! I simply put power to the dead battery with a jump box, turned the ignition switch on without actually cranking the car.

[@kishorilalkishoreda5719]

Thank you mate My car is 2004 SL500 and it has only 60k and I’m having problem with removing it from PARK position but today I left the car on for about 10 minutes and suddenly was fine So the battery could be it. Btw, what do you mean by “ parking switch “. ?

[@wand3rw0rld]

​@@kishorilalkishoreda5719 I think you meant "Brake Switch"?

[@kishorilalkishoreda5719]

@@wand3rw0rld yes thank you But now it’s fixed That one piece of plastic inside the shifter assembly was broken.

[@v12cat]

Brilliant video. The shifter linkage will come off from the top, despite what most of the forum posts say. Well it did on my facelift W220. Once the three retaining Allen head bolts are removed I twisted the mechanism backwards as far as I could and the linkage will the slide out of the shift lever. It has a plate cast into it so it won’t come apart in its normal operating range (2:30). The spring clip on it just stops sideways movement. All it needs is gently easing out of the machined groove in the selector lever (2:30). A much easier job than it appears at the start. It pays to look through tutorials to find good ones like this!

[@Turbo_Snail]

Yeah, I was hoping to get it off from the top as all I read was having to get underneath and I got discouraged. But it worked. I wish I had better shots in the video. Maybe next time someone has the issue I may be able to redo this video for better quality and angles. Thanks for watching!

[@Crunchykyle]

@@Turbo_SnailI will volunteer to meet up and you can make a better video on my 2003 S430 please man I’m begging you.

[@kashiomodashio6455]

Great job and great video, my 03 s430 just got stuck, so I’m going to do the same, the black plastic piece with the spring is the piece I’ll be extracting out correct?

[@Turbo_Snail]

Yes. Watch the other video as well. I got a lot of flack for just removing it and not reinstalling it properly.

[@zen8316]

Thanks a million. Worked for me to bypass and I’m fine with that. Nothing broke but I think the solenoid was out.car runs fine. Thanks so much.

[@Turbo_Snail]

Thank you for watching. Please watch my follow up video to that as well. And if it’s not too much to ask please thumbs up it. It helps on my end. Thank you again!!!

[@zen8316]

@@Turbo_Snail I have watched that video but will offer a response. I did appreciate that view also and it helped it me make my final choice.I do think my sensor went out because there was nothing broken.and had metal or aluminum lever.

[@Turbo_Snail]

Excellent. It was controversial because I removed a safety feature.

[@zen8316]

@@Turbo_Snail I bet but. 800 dollars cheaper. At least for me and this is what makes you my MVP.

[@zen8316]

Update. While driving my 01 clk430 home after doing the workaround I set it to cruise control. Cruise control would not disable driving through a school zone and was accelerating while on the brake pretty hard as cops looked at me strangely. . It you have to do this you might wanna check your cruise control in a safe place if you expect to use it. Just a heads up. I parked mine while I wait for cheap eBay replacement shifter.well 200 plus a year square trade warranty for 49. Worth it. Be safe. Do what you you have to do.

[@dot-herb6382]

Thanks man ! I did it 😁 with your explanation ! There was some little differences between your car and mine but guidelines were similars

[@Turbo_Snail]

That is awesome!!!

[@keepitkush5208]

Major thank you is in order. You helped me a lot with this info. Took me about 3 hours to get the whole thing out and put it all back together. This was exactly what my problem was tho.

[@Turbo_Snail]

Thank you for watching. There are more videos to come. Today we are working on the transmission mount to eliminate some vibrations.

[@bartekkarczewski2858]

Wow. Fantastic. Done with mine and is working fine. I had 3 issues which I didnt seen on your video how to go around it but manage sort it out… Many thanks

[@Turbo_Snail]

Glad it helped

[@bartekkarczewski2858]

@@Turbo_Snail only one video that much clear… many thanks mate..

[@Turbo_Snail]

check out my updated video as well. we've done it right the second time.

[@felixtotolici]

Hello there! Great job indeed. Can you please help me with a suggestion as to how to disconnect the main electric plug, the one with the white cap, that is in front of the shifter, basically towards the P position. Also some suggestions for disconnecting the metal clip from the arm? Forever grateful!

[@Turbo_Snail]

Watch the second video, the update I made for this as well. Maybe it will answer some questions. On the metal clip there is a little [ that holds the shifter in place. You gotta bend it out. At least that’s the only way I’ve managed to remove it. In regards to the plug, spray some electrical cleaner on it. Maybe it’s just caked up? I really don’t recall anymore but some of the plugs were a little harder to take apart. Usually plugs have a little plastic latch. Once depressed they usually release. I hope this helps, the repair was done over 3 years ago. It’s hard to recall. The 2nd video may reveal some additional steps/footage. Good luck!

[@eyeswideshut7354]

Also, how did you disconnect the shifter mechanism without getting under the car?

[@Turbo_Snail]

I pried the c-clip open. I widernd the gap. After it’s all done you can squeeze it back together. Even if you get underneath the car you can’t really see what you’re doing. So for an at-home fix, that’s the best I could come up with.

[@DmitriHolod]

Thanks man! The best video explaining all this Mercedes secret room..

[@Turbo_Snail]

Glad it helped!

[@jelleveirman]

Thanks for the video. I just fixed a w220 today the same way. Only issue I have is that it goes very easily out of park even without pressing the brake pedal. It clicks though when pressing the brake pedal. But is seems the aluminium replacement part has a little too much play the keep the shifter locked in park… 🤷‍♂️

[@Turbo_Snail]

Ah that’s sucks. That means it doesn’t push against that actuator. Well it works for now, but if it bothers you or you are in a state with inspections, you gotta fix it again. I’m glad you got it “fixed” tho!

[@jelleveirman]

@@Turbo_Snail or the spring that pushes against it got too soft or squeezed...

[@truknfred1]

Thank you for the video I had to go rescue my son as well today

[@rtbrintlinger9233]

you're a great Dad!!

[@Turbo_Snail]

Thanks! It's more about safety. I rather have him drive this than a Civic.

[@MikeWMiami]

Something similar happened to me with a 2003 SLK320. Could not get into park, could not remove the key. The battery was old and not charging well. I replaced the battery and that solved the problem for me. Crazy!

[@Turbo_Snail]

Yeah. That’s a different problem than the one in my video.

[@szymonkaczorowski1212]

Could you please describe how to disconnect the shifter from transmission link? On 2:47 you are showing it but no details how did you unplugged this? I am afraid it could be the most difficult procedure. Thanks

[@Turbo_Snail]

I’m sorry I didn’t get any video of that. I was struggling and tried to figure out how to do it. What I did was bend that little U shaped clip away/out with some big needle nose pliers. This will let that little button slide out. When you reinstall it, squeeze it back in. You go from |_| to \_| that is enough to release it. It is very easy. The hardest part was actually lining up the console back into place as I did it by myself.

[@szymonkaczorowski1212]

Turbo Snail thank you. I am going to take it off because I have started to feel hard shift to P and backwards. I am afraid that this plastic part started to broke and shifting is different now. Better to get it earlier then it will stuck on P forever.

[@Turbo_Snail]

That is exactly how ours started. Eventually it wouldn’t work anymore. Luckily it was in front of our home and not somewhere out and about. Have someone help you put the console back in. It was a bit of a pain by myself. Good luck and thanks for watching. Check out our other videos if you can.

[@NoodleMcnoodle]

I have a C240 that has the opposite problem. I occassionally cannot shift INTO park. Same problem??

[@Turbo_Snail]

Hm. 🤔 first time I hear of that. You should always be able to shift back into park. Check MBWorld.org. Those guys are a lot smarter.

[@WildBill541]

I’m here for the same issue on a C320

[@Yiyiyi-p5e]

@@WildBill541same issue w220 hard to get in park

[@WildBill541]

@@Yiyiyi-p5e Yeah, I’m not 100% sure what the problem was. I sold it to someone else to figure out lol

[@screentutsHD]

Thanks for this video! That plastic part was cracked in half when I got it out so I'm pretty sure that was the problem! One day later my car won't start. It could be completely unrelated but I'm wondering if you have any advice. Is there any "safety" switch that might have been affected by removing that? The car dash lights up, electrical is on but it won't turn over. No clicking. Nothing. Any help you can provide is appreciated! Thanks again.

[@Turbo_Snail]

Have you checked the battery? Some people leave the lights on during the procedure and it drains the battery. Also, try to disconnect the battery and wait 20 minutes. Car will reset itself.

[@BrentSchneider]

Crankshaft Position Sensor, if you have a strong battery and no clicking.

[@dk4undc1]

so you had to replace the part that was broken? because you didnt show that so when you take it out it must be replaced?. that was helpful

[@Turbo_Snail]

Actually. In this video. I just took it out. I have a follow up video that shows how to reinstall it.

[@peterwilson3471]

in the uk mercedes wanted £600 for that park problem I fixt it my self for free thank for your help

[@Turbo_Snail]

Once you see it in person it is hard to fathom why someone can charge so much money for a 50 cent part. Even if it was made of gold it couldn’t cost that much. SMH. I’m glad you got it fixed. I developed a bad habit of not stepping on the brake anymore when I’m shifting out of park. ;)

[@francopellicier]

Good job, I'll do this to my W22o S350, 2006. Thank you very much!

[@Turbo_Snail]

Watch both videos. I made an update. It may get you better angles. I hope it helped.

[@ksiazevald1170]

Mercedes W220 thank you for your video I managed to unlock the gearbox and remove this plastic element what do you mean it is dangerous if you remove it I saw in the comments your statement that it is better if it is for example metal fitted ?

[@Turbo_Snail]

I don't mind not having this safety feature in it. Some people think it's dangerous. I for one don't let 3 year olds drive my car so it should be okay. Basically if you remove that, you don't have to step on the brake anymore to shift out of park. Can it be dangerous? Perhaps? But that is up to you to decide whether this is a feature you must have. If you do, follow my link and buy a metal version of that plastic part from Amazon. It's okay enough if you want to put it in.

[@ksiazevald1170]

thank you my friend thanks to you I saved 150 dollars In Poland such a service costs I will tell you that it is safe without it, because nothing will block you anymore, and with this plastic maybe something can always block you in my opinion it is made so that the car is not stolen it is primarily a protection against car theft, or maybe it is made of plastic specially so that in case of emergency it can be broken manually because you will not break the metal one maybe that is the whole philosophy, Thank you again my friend how many people are happy with you how much good you have done for everyone it is a pity that I cannot send you a picture of my S class, because it is really beautiful maybe I will find your email and send it to you Once again warm greetings Waldek 👋🏾

[@Turbo_Snail]

I think, like on a manual where you need driver input to shift to a certain extent, you need a driver to push the brake to shift out of park. This way a passenger doesn't shift mistakenly. When you drive manual you usually pull the e-brake, however, automatic drivers often dont do that. Here in the USA, this service would be over $1000 as the dealer will not fix the broken plastic but install a complete new shifter. $150 sounds a lot more reasonable than what they do over here. Yes, I would love to see your ride. I enjoy seeing what other people do to their cars. I'm from Austria so I'm used to people working on the body, the interior and a bit on the engine. Here most cars just have crazy engine work and very little on the outside. I enjoy watching KZbin videos from Wolfgangsee where they have several meets a year, even back in the day when I used to live there. I'd love to visit and perhaps participate in such an event again. Please email me @ [e-mail]

[@crimsoncollective]

Hey brotha I just did this to my 2004 S430 , I put everything back together started the car fine after removing the plastic piece out and left it out , drove it down the street parked it and tried to go back to it to start it now when I turn the key nada, you don’t even hear the starter trying to turn , but the battery is definitely not dead because everything turns on! Do you have any idea what this could be? I was reading something about a transmission control module letting the starter know it’s in park

[@Turbo_Snail]

Check the linkage from the shifter to the transmission. Maybe it fell apart. The car is probably still in gear and that’s why it won’t let you start.

[@crimsoncollective]

@@Turbo_Snail Took the shifter assembly back apart and noticed a small black rectangular plug was disconnected that connects to the shifter , (there is also a white one which is the same shape and size and a yellow one which is smaller than the first two) I connected those back to the shifter/ accessories and Walla!!! When anybody goes to do this just make sure you remember everything you disconnect and connect it back in the same place! Car turns on and shifts no problem thank you sir for the fast reply

[@maximeosorio9527]

Hello, after remove the plastic part broken inside who stuck the shifter and reinstall all Now I have my parks sensors not working is it normal without this part or I forget to plug something ? I check two times …

[@Turbo_Snail]

Sounds like you forgot something. Recheck.

[@maximeosorio9527]

Thanks for reply. The three button : tow, park and electric sun screen are powered but When i press button « tow off » the red light on button « park off » appears To get off the light I have to press the button under tow « off alarm » I do à mistake ??

[@maximeosorio9527]

And my parktronic front and rear have two red light with long beep before shutdown

[@hectorsegovia3593]

Good morning. Lol I’ve been up all night googling what went wrong with my girls 2006 Mercedes clk350. She was driving to work yesterday, just as she hopped on the freeway, the car stalled out and didn’t want to accelerate. We had to get it towed home. I checked the transmission oil and it’s black. We r the second owners to this car. We got it per-inspected, before purchase, and were told the car was left in a garage for years jus because it needed an oil change. And nothing was wrong with it. So I have 2 questions for you. One: should I change the transmission oil on the car before trying your method??? Or Two: Do your method taking out the most likely broken piece of plastic and then change transmission oil??? P.S Sorry for the long story lmao Thank you for your time

[@Turbo_Snail]

Sorry to hear about your breakdown. Those are 2 completely unrelated issues. Why did the car stall out? Engine oil/level? Transmission oil? It doesn’t have anything to do with the shifter. The shifter wouldn’t even let you put the car in drive. I was told by Mercedes tech that once your transmission oil is over 100k miles you shouldn’t touch it anymore. A transmission tech told me you can change the oil at any time/age. Not sure who to believe. The S500 has the same oil for 140k miles now and the only person willing to touch it seems shade so I’m scared to take it anywhere. If the transmission oil is black you may have bigger issues in hand if that’s why the car conked out. If all fails, not knowing your exact situation, and you know how to change transmission fluid. I would try doing that and see where it takes you from there. Just do a filter and oil and I wouldn’t flush out all of it. That being said, I’m in no way qualified to make such a decision on your behalf. The way I look at it, if it’s already broken, can I make it any worse? If the answer is no, what do you have to loose. Check mbworld.org. It’s a wealth of resources. I wish you good luck and I hope you get to enjoy that car for many years to come!

[@marshallw.6343]

@@Turbo_Snail I wonder why you would never change out the trans oil once it's over 100k? That makes no sense to me... hmmm I wonder why...?

[@Turbo_Snail]

@@marshallw.6343 I was told that by a Mercedes tech. This oil was supposed to be lifetime oil. However, later a memo surfaced that oil should be changed every 60k miles (100k km). For people who haven't done the oil changes on time they were advised to not change it if it was never changed before 100k. There has been a class action law suit and people got some compensation for that (if you were the original owner). At this point (140k miles), I'm just gonna run it until it dies. I've read, expected life should be around 200-250k miles (unless you are racing or towing). Now, I had to change a transmission cooler hose and there was some oil that came out. The oil seemed still in good color and no contamination. I expected it to be black.

[@loug4626]

What was the plastic part you removed? Did u replace it or just leave it out ? Thx

[@Turbo_Snail]

Check my updated video. I installed it after an argument with a mechanic in this videos tread. Honestly, it would have been fine without it as long as you know the risks.

[@ranat5526]

@@Turbo_Snail It's too risky without that stop check key, you just don't know what a small child is capable of incase they may jump to the front seat while the engine is running!!

[@davidseawell7106]

If the car is stuck in park that's easy to fix do not take the whole console apart that's not what the problem is.

[@loug4626]

Fixed. It was a faulty brake switch in spite of brake lights still working.

[@agkoustozarras6015]

I replaced on my S class W220 with an aluminium one and when I press the brake pedal when the car is on Park it makes a clicky noise because of that part. Does your car after the repair make any noise when you press the brake pedal?

[@Turbo_Snail]

Yes it does.

[@DrLynch-iw6yg]

Thank you for sharing your repairs. 💪👍

[@Turbo_Snail]

Thank you for watching!

[@miekwest1]

Hi there - great video! Really informative and it's given me the confidence to have a go with my SL350, which has started to suffer the same problem - and it's getting worse. A couple of questions - on some forums I've seen people saying you need to be careful about blowing the airbags because of a sensor in the area. Did you consider this 'issue' or not? And what do you need to do to avoid a possible problem with the aibags? thanks and regards

[@Turbo_Snail]

Disconnect the battery and wait about 20 minutes before doing anything around electronics. That will prevent any accidental airbag deployments. That being said. I can’t imagine why there would be a sensor for the airbags there.

[@miekwest1]

@@Turbo_Snail OK thanks for the advice! :-)

[@roadbepbeeprunnerbeepbeep9190]

@@Turbo_Snail If you disconecct the battery aren´t you going to ruin the data in the computer´s car?

[@Turbo_Snail]

Not at all. Whenever working on anything electrical, unless you know what you’re doing, disconnect the battery. You may loose custom settings like preset radio stations but it’s better than triggering an airbag or frying some electronics.

[@roadbepbeeprunnerbeepbeep9190]

@@Turbo_Snail Thank you for your feedback. I am sorry but english is not my first language and I still did get it if you took the broken part (the plastic lever) out of the transmission module or you glued or something and put it back together. Thank you for your videos and help-

[@michaelangelo9871]

You know your s*** you ain't no joke what a good dad people like you that make the world go round

[@Turbo_Snail]

Thank you. It means a lot. I just want to spend more time with my kids.

[@sbstrddd]

Thanks for the video! Helped a lot! Although, when I opened up the shifter, I noticed the piece wasn't broken. It was still in one piece. My Benz seems to only want to shift from park into R, N, or D some of the times. Other times it locks up. Do you think it could have something to do with the solenoid?

[@Turbo_Snail]

It sounds like it’s the solenoid. Very rare. Keep in mind. My plastic piece was only cracked. I had to dislodge it for it to break apart.

[@behyndthescenetv]

Most Likely Solenoids

[@Turbo_Snail]

@behyndthescenetv nope. Broken plastic piece that the solenoid pushes against.

[@aurelientabuefoto5484]

Hi first of all thank you for your video I was able to remove all the parts but stuck with attach part. I noticed you did not record that part. How did detach it.

[@Turbo_Snail]

its a little clamp thats stuck on the side. Everyone tells you to get to from underneath however I was able to just pry it apart. Dont worry you won't damage anything. Its where the transmission attaches to the shifter. I used a flat head screwdriver. With a little force it will open up.

[@Turbo_Snail]

Check my other video, I can't remember if I recorded it. I also tried to explain it in the video description. I hope it helps.

[@jackee1derful367]

What tools did you use? I seen an Allen wrench, anything else?

[@Turbo_Snail]

Torx screw driver set. I may have put link in the description. Pretty much everything on the Mercedes’ is torx.

[@jackee1derful367]

@@Turbo_Snail thanks, everything you've shown has been BIG help. I'm having a hard time with that small bolt though, in trying to take out the gear box. I'll get it somehow.

[@Turbo_Snail]

Watch my updated video as well. I tried to get a few different angles and what I learned the first time around.

[@milkomollov2286]

Danke 🍀🍀 sehr viel geholfen jetzt bei mir funktioniert alles wieder besser Top 👍👍👍🤗🍀

[@Turbo_Snail]

Das ist super! Thanks for watching :)

[@eyeswideshut7354]

What color interior is that? Tan or cream? I’ve been thinking about cream colored interior.

[@Turbo_Snail]

I think it’s tan. Whatever the lighter color of the two is.

[@jaimeadama]

I did this on my s400cdi. After you disconnected the shifter did you had a EPC warning? My car now does not rev past 3500 rpm. And there is no boost on my turbos. Do you think it could be related for this repairs? Does it need some sort of reset? Thank you

[@Turbo_Snail]

I dont think it's related. Did you disconnect the battery before working on the car? Maybe try disconnecting the battery, let it sit for 30-45 minutes, reconnect and see if it recalibrates. Check if your car has a second battery. Make sure both are disconnected.

[@Chicken.Wayner]

Did you reprogram the new shifter?

[@Turbo_Snail]

Reprogram? How? Not necessary.

[@kingpinstatus2415]

Hello I have a 2006 S430 Mercedes Benz. When I start the car up, press down on the brake to attempt to move the gear shift into drive, the car will not move. Keep in mind I can move the gear shift from park to drive. Do you have a idea what the problem could be

[@Turbo_Snail]

You can check if the shifter linkage is connected properly. There is a little rubber piece that wears out, maybe it fell off. I hope its a $0.50 problem... good luck.

[@maxboya]

I know what your problem Is

[@kingpinstatus2415]

@@maxboya What do you think 🤔

[@maxboya]

@@kingpinstatus2415 still Have the issue?

[@rubenvega5867]

Hola, me pasa lo mismo, se me quedó trabado en la P y no deja hacer nada, enciende perfectamente, tú solo quitaste la pieza de plástico o la reemplazaste? Gracias

[@Turbo_Snail]

La reemplaze en otro video. Trabaja sin la pieza pero es mas seguro si la reemplazas.

[@rubenvega5867]

@@Turbo_Snailmuchas gracias, hay q quitar la batería para hacer todo eso?

[@Turbo_Snail]

@rubenvega5867 I disconnected the battery on the first job, on the second video the battery was connected. It should be fine.

[@rubenvega5867]

@@Turbo_Snailmuchas gracias, voy a probarlo porque se me quedó igual que a usted, trabada en parking, arranca y todo y ya antes se me atascó un par de veces pero ya aquí se me quedó trabada, ya contaré

[@rubenvega5867]

Acabo de hacerlo, retiré la pieza de plástico y no puse nada, hasta ahora súper bien y no se traba, mis dieces por el vídeo, sencillo de hacer solo hay q dedicar un rato y costo 0$

[@BadidaJackson]

Does this issue I’ve getting stuck in park have anything to do with the weather? I have the same problem and it seems to be fine when it’s 45° and up but then gets stuck when it’s colder. I have had it checked at a trusted car repair service and the Mercedes dealer and have not had any good results.

[@Turbo_Snail]

I’m not sure about that. However, looking at my views it seems to spike in the autumn and the spring. Not sure if that could be related or just coincidence.

[@BadidaJackson]

@@Turbo_Snail thank you for replying And for your original post.

[@lapatabelluda2240]

@@BadidaJackson same here when is cold I have to let it heat and wait so I can’t shift but when is hot like today is not even stock 😑 I told my friend he thinks is the transmission

[@chrispiirioja6122]

@@lapatabelluda2240 transmission oil is very important to be at the exact point

[@openureyes]

Great job 👏

[@Turbo_Snail]

Thank you!

[@Feyenoord0492]

Hi Sir i just got out my shifter today and openend it , i try to get the plastiv lever uout , but a pin , is stuck in it could you please help me out i got pictures and everything please help me ! greetingsss jessie

[@Turbo_Snail]

Email me at [e-mail]

[@Crunchykyle]

I’m in Daytona Beach. Would you do this to my car for $250?

[@Turbo_Snail]

Sorry, I'm not a mechanic. It's easy tho if you want to try it yourself. If you email me I can recommend you maybe an actual mechanics. There is a great local Mobile Mechanic that would probably charge you about that, maybe even less.

[@Crunchykyle]

I sent you a email. Still waiting on a response..... I really need that info for the mobile mechanic.@@Turbo_Snail

[@Thehandsomehustler]

My 2000 clk 320 gets stuck in drive and neutral then I just turn the car off and when I turn it back on it usually cooperates could I have the same issue?

[@Turbo_Snail]

I couldn’t imagine a situation why it would get stuck in neutral as well. The little plastic piece I took out is strictly for the release out of park. That’s all it does. I would open it up and look for some type of obstruction or maybe just a good cleaning and lubrication, you won’t believe all the stuff that gets down there after 20 years. I hope you find the issue. Good luck.

[@Thehandsomehustler]

@@Turbo_Snail it's not stuck in neutral it won't go past neutral and driver when I try to shift it sometimes

[@Turbo_Snail]

Ok, then probably the little plastic piece is Brocken and getting in the way of shifting. I would take it apart and see what’s going on.

[@jayhernandez8160]

Did you get it fixed ? I have the same problem 2006 E350.

[@beesmyth5490]

How did you disconnect the shifter

[@Turbo_Snail]

There is a little clamp on the bottom left side. Deep down. Pry it away. It’s usually held in place by a little rubber prong but the car being that old, it’s probably rotten away and should come apart with a little force. Read the comments and description.

[@armandh9287]

Thank you so much for this nice info that you shared!

[@Turbo_Snail]

Thank you!

[@davidsyked9420]

Did you replace the broken part or put everything back together without replacing the part

[@Turbo_Snail]

I have 2 videos. The original one that got some outrage because I removed the safety. And then the other one, where I put one back in. Just search the Mercedes playlist. I tried to make it a bit more explanatory than the first video.

[@misaalsaxena6528]

How to move the lever in neutral if it is gear shifter stuck to remove the central bolt? Can you please tell how you put the gear shifter at neutral position?

[@Turbo_Snail]

You can hit it with a mallet. It’ll work maybe a couple of times. I got lucky. I had to pull the lever maybe 20 times before it released to do the service.

[@davidseawell7106]

Yes that is easy.

[@sadokbarbouche9427]

I have a 2004 s500 4 matic with 80k miles will i damage it if i change the transmission fluid?

[@Turbo_Snail]

Oh man. That is a sensitive topic. I was told by a Mercedes dealership that they wouldn’t change my fluid because we had over 100k and it was never changed. Then a transmission mechanic said it’s fine to do filter and oil change. No flush. I wish I could tell you more. You should consult with a Mercedes dealership and let them do it. Yes, I said it, try the dealer first. That’s a $6000 transmission you’re potentially playing with.

[@mohamedelyaouti2051]

Do it! No such thing as a service free trans. No matter what Mercedes says. The trans needs new fluid because the old fluid loses viscosity. And the trans will eat itself regardless eventually. If it does break after replacement then the transmission is destroyed already anyway and you just saved yourself a breakdown because now you know.

[@Turbo_Snail]

@@mohamedelyaouti2051 Let's see. Maybe. I have a busy month at my "Real Job". Once I'm done. Maybe I should do a video and see what happens. I just hope its not a $6000 mistake!!! ;)

[@mohamedelyaouti2051]

@@Turbo_Snail i see where your coming from, i dont have issues as i always purchase with service records. in any case the transmisisions are very cheap to replace on the used market.

[@Turbo_Snail]

@@mohamedelyaouti2051 I actually have all the service records as well. Apparently the previous owner had 100k mile warranty and everything was always taken care of, however, not the transmission :/

[@peterwilson3471]

thanks I took mine broken plastic bit out no need to replace it it will never get stuck in park againit was easy 6 scews out take out broken pease out your free ive got a SL 350 BIG ENGINE Don't everreplace that part I beg you I'm driving my car out the silly part in it keep that part out I'm very happyI can park my car and it will never get stuck again you done a great Video thanks

[@Turbo_Snail]

I'm glad it worked! This was my first video, sorry for the quality.

[@tmo2798]

That's a pretty dope beat that bumps.

[@Turbo_Snail]

Thank you. Music, because I'm a bad talker.

[@bigrichard2840]

My 2005 e class is stuck in park is it the same issue?

[@Turbo_Snail]

It should be very similar if not identical. I think the S and E shared the same design.

[@GeorgelStingaciu-z2g]

Hello Sir, I have the same problem with my car s 320. I want to replace that connector but I don't know how to look for it so I can order it. Please tell me where I can find it and what it is called. Thank you very much

[@Turbo_Snail]

All the links are in the description. Also check out my other video for parts on the same topic.

[@D_Z_1]

At 2:30 this thing where it's connected is now broken :( I don't know what I can do now. I have fixed it for now with cable ties but I think it don't hold long and it's terrible to don't know what happens when the cable ties break and the shift linkage falls off. Please help 😭

[@Turbo_Snail]

Put it back thru the hole. Should be like a ushaped pin that goes over the linkage when coupled. A zip tie will definitely break.

[@Turbo_Snail]

In the second video I lost the rubber grommet. I was able to get the replacement.

[@D_Z_1]

The problem is that the small part with cast iron where sitting the rubber is broken out of the end from the linkage. It was after break a small part. I don't know what to do... A replacement of the linkage is very hard to get. Sorry for my bad english btw. I from Germany.

[@Turbo_Snail]

Ah das ist nicht gut. Ist das der Teil vom Getriebe oder der von der Schaltung?

[@D_Z_1]

@@Turbo_Snail Du sprichst deutsch? :) Es ist der Teil der Gestänge und Schaltung verbindet. Das was gebrochen ist war am Gestänge dran also das Teil was vom getriebe kommt... Leider kann ich hier auch kein Foto senden um zu zeigen was genau kaputt ist.

[@jimmyliew9128]

Hello my friend can you show or let me know how do I fix my 2002 CL55 Mercedes car Shifter stuck in park

[@Turbo_Snail]

Watch both videos I’ve done on that. Also read the description.

[@jimmyliew9128]

Hello my friend is me again I would like to know my 2002 CL55 replace the Shifter plastic part the part number is #. Can we replace to Aluminum n can you help to tell us where to order it. Very thankful for your Help.Thankyou.

[@Turbo_Snail]

@jimmyliew9128 I’m not sure where to get the plastic part. You can do the aluminum one from the link in the description. It works fine.

[@GeorgelStingaciu-z2g]

Hello Sir. Just last night it happened to me that it got stuck in parking mode and a friend of mine told me to force it somehow or hit the gear lever and it will return to driving mode. ok it worked but when I park it remains stuck as well

[@Turbo_Snail]

Yeah. Sounds like that piece is broken. All gears will work but it’s almost impossible to get it out of park.

[@MercedesE63S-AMG]

So what exactly was the problem? That black plastic piece? You just removed it? I have a cl55 that just started doing this. I have to really fight it to come out of park.

[@Turbo_Snail]

Yes, they decided to put a cheap plastic piece in there. You either replace it or remove it. If you remove it you can shift out of park without putting the foot on the brake.

[@hustleramirez8959]

Q

[@mexicanamerican21]

So then what is the point of that plastic? My cars lock switch also broke but it will only shift into park or drive when I take my foot off the break. But when I try to shift using the shiftronic it doesn’t work

[@Turbo_Snail]

It’s probably jammed in there somewhere. Take it out and safe yourself some future headache. It’s there so that a passenger or a kid couldn’t possible shift the car out of park.

[@jb3274]

Hey man, does this mean you can now shift it in PRN or D without even pushing the break? Even when your doing 60mph. Since that plastic piece was to prevent it from doing that. Or am I wrong? Thanks.

[@Turbo_Snail]

Yes. I can shift without pushing the brake pedal. It was the cheapest solution for that problem. Mercedes wanted $1200 or $1600 (if I remember right) for the shifter which was way out of budget. So yes you must be aware of that. In most European countries that would not pass inspection either.

[@jb3274]

@@Turbo_Snail oh i see, thanks allot man!!

[@b0mykneesmyth872]

How did he disconnect from inside the car he skipped that part

[@Turbo_Snail]

Yeah, couldn’t get the camera in there. I wrote it up in the description, trying to explain best I could. Also watch my follow up video.

[@2010onlyme]

I have a question I have a Mercedes Benz C230 2006 my car have the same problem with the gear shift with the only difference my was giving the changes when the car was off. So I took it to this near by Mechanic Tire Choice is the name of it. and it’s been 4 weeks and 4 days since the car is in this shop I do t know what to do if I should take this car to a Mercedes specialist that know that someone recommend me. Or just sale like it is paid off the car or just this people don’t know how fix the problem! I need help I don’t know what to do if I should towed my car to the specialist or sale it just like it is. do you think this really take that long to fix the Gear Shift?? Your help will be appreciate. Every time I go to check if the car is ready is not ready and it’s been so frustrated I feel like the don’t know how fix the problem.

[@Turbo_Snail]

I just bought the replacement part. It should be here this weekend. I’m going to make a video maybe by next weekend on reassembling with the aluminum replacement part. Don’t sell the car. Even if you just remove the broken plastic piece, it’s really easy to do to get you by. Or get it to another mechanic, that should be a 1 hour fix.

[@williammurchison4474]

Man I'm haveing the same problem wit my 2004s430 can u help me

[@Turbo_Snail]

Watch both videos I made. Most people can do it fairly easy. It seems around this time of year I get tons to f views and comments on this.

[@shaunamartinez8951]

I'm currently having this problem but how did you get the gear shifter to come out you skipped that part

[@Turbo_Snail]

Watch my updated video. I tried to get some additional info in there.

[@louisvary8707]

It would be nice if you explain what you were doing as you were doing it instead of blasting the music

[@Turbo_Snail]

Watch the second follow up video.

[@adam987689]

2003 sl500 r230 stuck in park. When I took off the letter part off the gear box it’s the same looking shifter on the inside.. plz help. Ty

[@Turbo_Snail]

Just wedge that plastic part out inside the shift box. That’s it. Mine was broken so I completely broke it out.

[@p098098098]

Mine is stuck in park but also the car won't start ( no crank ) Its 2001 S600 with only 60.000kms. Any help would be very appreciated. Thank you.

[@Turbo_Snail]

does your key turn in the ignition? If not, you have a bad key (maybe just a dead or low battery). Bad key will give no start and no shift. If that's not it, check the fuses. I like to start with the cheapest possibilities.

[@candyman6665]

Do I have to put the car in neutral to remove the shifter???

[@Turbo_Snail]

Don’t remember. I think you can probably remove it in park or neutral. You need to move the shifter the remove the panels however.

[@candyman6665]

@@Turbo_Snail do I put the car in neutral when it's off and the battery is disconnected in order to push that little pin in to get to the 3rd bolt?? I just wack the shifter with a hammer? Is that necessary to get to the 3rd bolt??

[@Turbo_Snail]

@candyman6665 I remember having to move the shifter through the gears. It’s been too long.

[@robertstone6302]

can you replace the plastic piece you removed?

[@Turbo_Snail]

Yes. There is/was a company in China that replicated that part in aluminum. I left it out. I opted to not replace it but remove it. I have no links to that part unfortunately. Mercedes only sells the whole assembly for a crazy amount.

[@roadbepbeeprunnerbeepbeep9190]

@@Turbo_Snail You are correct. I have the similar problem on a SL from 2003 (in europe) and the only solution offered by Mercedes was to replace the whole module (1000 euros plus work hours). However, I call the attention of everyone that the replacement parts sold online may not fit your Mercedes. Some sites let you give your particular model and check if it fits your car or not. Yet, most don´t. I have looked into those aluminum replacements but then again I am not sure if it will fit my car. My question to you, Turbo Snail, is if the car taht you fixed is still running without problems with the glued broken part on this video? hank you for your video and help which is has been so helpful for most of us with the same problem.

[@MrMirajjarim]

How did you take off the link that connects to the box ?

[@Turbo_Snail]

You have to force it open a bit. Get a flathead shrew driver and carefully jamb it in there. Spread it open. When you install it use big pliers to push it back together. It is a pain.

[@Turbo_Snail]

The little metal pin that holds the round “button” in place. Force it out. It will release. Make sure when you pop it back in you bend the metal back in place.

[@philipcooper8297]

2004 vintage Mercedes-Benz. :)

[@Turbo_Snail]

:)

[@jennifertorrence5032]

hello @ turbo no i didnt disconnect the battery but turned it on several times while working on it and drove it yesterday i ran a test and codes are p0600 and p0705 i believe. what else can I do

[@Turbo_Snail]

Unplug the battery and let it sit for 20-30 minutes. Maybe the code will reset. I’ll research what those codes are when I get home.

[@Turbo_Snail]

P0600 means that the ECU has lost the connection with one of its many controllers more than once. When this code is set the ECU triggers the Check Engine Light to be displayed on the dashboard and a failsafe mode enacted. The failsafe mode is to prevent further damage and protect the vehicle. What the P0705 code means. Diagnostic trouble code P0705 indicates that the Engine Control Module (ECM) or Transmission Control Module (TCM) has received an input error from the Transmission Range Sensor (TRS). ... The function of the Transmission Range Sensor is to tell the ECM or TCM the position of the shift lever.

[@Turbo_Snail]

So the first one should be reset with a battery disconnect. The second one may as well but maybe a disconnected cable at the shifter. Recheck the wiring.

[@jennifertorrence5032]

@@Turbo_Snail ok i will disconnect and look at the wiring again thank you so much!

[@agustinperez1118]

Muchas gracias por tu vídeo me ha servido de mucho gracias al video he podido solucionar mi problema que era el mismo (((((GRACIAS)))))

[@Turbo_Snail]

Wonderful. I’m glad it helped.

[@jackdaniels8356]

Are you in the southern California area? I have a w203 c350 and have this same issue, will pay for help! thank you!

[@Turbo_Snail]

Thanks for reaching out. However, I live in central Florida.

[@kusadasister]

I have to same problem. It’s doesn’t work from P to change.

[@Turbo_Snail]

You can force it to get you going once or twice but you gotta fix it. I hope the video helps. Watch both for reference.

[@autoglassmechanix7716]

My S350 4matic w220 stuck in to D-N and 1.hrs. later working! Why? I dont understand... no stuck in park, stuck in D-N and later woking

[@Turbo_Snail]

I can only imagine that the little plastic part broke off and was stuck, preventing you from shifting back to park. After some wiggling you may have dislodged it. If you can shift out of park without the brake pedal than that’s it. If not, I don’t know.

[@jmlp1368]

Good job.

[@phillybred8580]

What parts were broken?

[@Turbo_Snail]

The little plastic piece that pushes against a piston when you step on the brake so that it allows you to shift from park.

[@nathanlich9812]

But what if the shifter is moving fine, even when the cats off?

[@Turbo_Snail]

Then the shifter is not the problem. As long as the key is in the ignition in ACC, and the pedal is depressed, you should be able to shift. If you can shift without the brake pedal, the safety feature has been already removed.

[@davidseawell7106]

No you have a problem well that's easy to fix

[@timrocheleau86]

I just tried it, but I can't remove it because the console is stuck against the lever (which is in park) and I can't get it out of park with a hammer... Any idea ?

[@Turbo_Snail]

You gotta be able to shift at least into neutral. Plead with it, move the shifter patiently back and forth. Eventually it should release. Make sure your foot is on the brake and the ignition is on. Did you remove the shift knob?

[@timrocheleau86]

@@Turbo_Snail yeah I removed the shift knob. I used to eventually manage to get it out of park but this time I just losed it and didn't have the patience for that. Also I have wires in the back that I can't unplug...

[@Turbo_Snail]

Wires? It should be a metal clip. Bend it outwards (the u looking part) with some pliers. When it pops back in just bend it back in.

[@Turbo_Snail]

How did you make out? Back together and driving? Or pulling the last hair out?

[@timrocheleau86]

@@Turbo_Snail Nah I gave up and put everything back together. Right now I just hope that my faulty ABS sensor is the cause of it...

[@alaaalahmad2721]

How can i buy a metal part

[@Turbo_Snail]

I have seen them on eBay from China. I don’t think Mercedes sells it. As they want to sell you the compete shifter assembly.

[@Turbo_Snail]

Also, from what I e seen it’s almost impossible to put it back in without further disassembly.

[@alaaalahmad2721]

@@Turbo_Snail my car is not stuck every time . do you think it is the same problem?

[@Turbo_Snail]

Yes, that’s how it starts. The plastic part is cracked and not completely broken. It’s just a matter of time until it breaks off.

[@kayausderkiste1000]

@@Turbo_Snail onlinewholesaleparts.com/rk20091021.html

[@bigdaddy3955]

Would this work on a w210?

[@Turbo_Snail]

Yes, I believe it is the same. After 2006 there was a change and doesn’t apply to anymore.

[@Turbo_Snail]

I’m not sure tbh. But I would imagine it to be at least similar if not the same.

[@Kohovysavac]

why you just didn't pull strong and break the fuse

[@Turbo_Snail]

What fuse? There is no fuse in the shifter assembly. There is a little black plastic piece. If it breaks, it’ll jamb up something else when you least expect it. That piece as shown in the video must be removed or replaced.

[@rogermurphy724]

any one have a problem with 99 sl500 shift stuck in park

[@Turbo_Snail]

They have the same issue the w220 people have. I think it’s very similar.

[@bogdanbutnaru1612]

how come the broken pieces are no longer needed and he threw them out? wth

[@Turbo_Snail]

The broken piece is connected to an actuator. If you release the brake it pushes against a latch that blocks you from shifting from park into any other gear. Now, once you push the pedal it unlocks it and you can shift. When the plastic piece fails it gets stuck in the lock position because the actuator cannot push against it anymore. If you remove it, it’s always unlocked. It can create a safety issue but it’ll fix your problem. Watch my updated video on how I installed a new one.

[@peterwilson3471]

I counted 36 different Mercedes with that problem

[@Turbo_Snail]

Wow, unbelievable. It should have been a metal part and not plastic.

[@jennifertorrence5032]

@@Turbo_Snail i need help i followed ur video completely everything went well taking apart and putting back but now my speedometerand rpm and my temp gauge dont work but my fuel level and outside temp does did i disconnect something by accident or??? please help my email is [e-mail] asap thanks

[@Turbo_Snail]

Hi Jennifer. Sorry to hear about your troubles. Did you disconnect the battery when doing this job? If not, you may have drained your battery too much. Recharge and try again. If the battery is full, did you reconnect all the wires after disassembly?

[@loco8850]

Wats the name of the song i herd it many times before but never kno the name n imma make sure i played this track when im done n get her driving again lol

[@Turbo_Snail]

It's called "Foundation" by Vibe tracks. I got it from the KZbin Creator Studio. Click on Create, Audio Library, and type "Vibe Tracks". I use all of the Vibe Tracks Library for these Videos. Keeps a consistent feel and sound. Thanks for watching and happy creating!!!

[@loco8850]

Turbo Snail cant find that exact beat when i type in Foundation Vibe tracks not making a video just wanna blast the tune when im done fixing this shifter problem n driving it on road agian lol

[@loco8850]

Turbo Snail n the the 3rd srew from top the a pieace metal blocking it from being unsrew

[@Turbo_Snail]

You gotta have a KZbin account for creators. Not sure how this worked anymore but once you are in the uploading screen you can go into the creators tab (I don’t know how this works on the new beta, not there yet) and look for “vibe tracks”.

[@deonamarithamesthames5400]

Was the car crank and was stuck in park

[@Turbo_Snail]

Yes the car starts just fine if it’s stuck in park.

[@Walerdos007]

ОГРОМНОЕ Спасибо !!!

[@rrarre]

I have a c240 2001 lately it’s been getting stuck in Drive and neutral and can’t move it up to R or Park, I’m not the best with cars. All I know is that when this happens and I’m driving the car stops really harshly and when I’m driving it makes a really loud noise. I just got the transmission oil changed I thought it would be that but since I’m not great with cars I wouldn’t know haha. Anybody know what could cause this? Thank you.

[@Turbo_Snail]

Hey, sorry to hear about your troubles. It doesn’t sound it’s a shifter issue. At how many miles did you get your trans oil changes? Did you do oil flush? Or filter and oil?

[@blaster12v]

There is a small hole with a small cover on it , bottom of stick Under the D put a screwdriver in there and it unlocks the stick

[@blaster12v]

There is a small hole with a small cover on it , bottom of stick Under the D put a screwdriver in there and it unlocks the stick

[@rrarre]

Turbo Snail got my trans oil changed at 208k miles, last week.

[@rrarre]

blaster12v yeah it’s not really drivable now my car doesn’t go past 1st gear whenever it gets stuck the way it does.

[@kerrycook2730]

you didn't tell or show anything.and the music was bad.real bad.

[@Turbo_Snail]

Ok

[@glanton9]

I was jamming! And thank you for the help! Video saved!

[@Turbo_Snail]

@glanton9 wonderful. Thank you!

[@davidseawell7106]

So I watched that entire video with that dude right there and my car is a c320 2001 Mercedes Benz stuck in park and I could not get the car to start as a matter of fact there was no energy or no electric going to the starter so the starter wasn't even engaging I tried everything in the world and it didn't work from you guys on KZbin so I decided to pay someone to come out here with a computer and tell me what was wrong and he did start my car it took him 2 and 1/2 hours he didn't take nothing apart he got it started I paid him $200 for his time and $22 for the part. Now if you want to know how to fix your car that's stuck in park and it's not starting hit me up and I'll tell you what to do.

[@Turbo_Snail]

You know that there is a difference between a car stuck in park and a car not starting.

[@parodoxicalization]

Hey we have the exact 2001 C320. My car is stuck in drive and will not go to park. So I have to use the parking break to get the car to stop and “park” How do I fix this?

[@h.j.c1409]

I have this same problem. 2004 C240 4Matic. The car starts intermittently. When it does not start, it will not shift out of neutral with switch on. Sometimes I can jiggle the shifter and get it to start. Other times, you just wait and maybe it starts later. There seems to be no rhyme or reason to it... What was the deal with yours? Thanks!

[@infantbruhh7154]

What did your mechanic do @davidseawell7106

[@marcoantonioalvarez7223]

Thank you

[@Turbo_Snail]

Thanks for watching!

[@GG-yn6jw]

I have a Mercedes cr230 2005 and I have the same problem obviously if you're mechanically inclined as yourself yes it is a piece of cake but in my case I am not. Now I'm more frustrated I thought it was something simple like a fuse that I can do myself obviously not🙄

[@Turbo_Snail]

Oh, sorry to hear that. I’m not a mechanic by the way but if you go to a trusted mechanic they may be able to do it for you for cheap. Just point it out to them and see what they say. I hope you get it fixed. Cheap!

[@GG-yn6jw]

@@Turbo_Snail thank you so much, so nice of you to reply. Unfortunately, I don't have a reliable mechanic. But as soon as they see Mercedes regardless of the year, they over price everything, even for a diagnostic. I'm searching for an honest mechanic. Thanks again!😊

[@Turbo_Snail]

It’s not just Mercedes. Trust me. Mechanic rates have surged from $60 to about $130 per hour in just the last 5-6 years. At least in my area. And that’s regardless what type of car.

[@iamher6422]

Good stuff

[@Turbo_Snail]

Thank you. I hope it helped.

[@mattiehousworth]

Does anyone knows who this music is by

[@Turbo_Snail]

The music you hear in this video is called Rock Angel by Joakim Karud. It's license free on youtube. Just download and enjoy!

[@tyronewhitlock105]

I was thinking the same thing ot sounds like a beat from 9th Wonder

[@enrique1955]

A very sincere...thanks !!!

[@Turbo_Snail]

Thanks for watching! :)

[@_palaced_5067]

where you located

[@Turbo_Snail]

Central Florida

[@luhjay1948]

How can I get in touch with you I’m in Sanford

[@Turbo_Snail]

Email me

[@harambememorialpage]

2004 is vintage? 🥲

[@Turbo_Snail]

I know it doesn’t sound as old as the late 19 hundreds, but 20 years is pretty old.

[@deonamarithamesthames5400]

My 2000 s430 key wont turn

[@Turbo_Snail]

Put a new battery in it. If that doesn’t work you may have a problem with the keys electronic.

[@georgegeorge6034]

Brake light switch £20 cured my E240

[@Turbo_Snail]

Beats dropping $1600. :)

[@romanskarzhinets3128]

Nice omega watch

[@Turbo_Snail]

Oh, thank you. It’s an Omega Seamaster Olympic Edition for the Vancouver winter games in 2010. It’s not everyone’s cup of tea because of the weird color combination. But it was designed with a white face and red bezel for the Canadian flag and the watch lume is a baby blue for the ice/glaciers which was rare back then.

[@romanskarzhinets3128]

Turbo Snail i think its very nice