So glad to see you fellas have got another installment up online, Piero! Watching you and Lucky work is much more fun than wet-sanding my engine bay for the fifth time! And it's great to see somebody else overcoming the obstacles that ALWAYS crop up. (It's The Journey, not the End Point that makes these crazy projects so fun and satisfying. And yeah, occasionally so aggravating you gotta scream ;)) I test-fired the stroker I built w my buddy John, last week. Now if I can get it painted without losing my mind, I can start to put it back together for the last time, (I hope!) My best to you and your great crew.
@williamlovely450 Жыл бұрын
Lucky is a wonderful fabercator his skills are amazing what a kool friend to have
@formspimp2 жыл бұрын
Always fun hanging in Lucky’s garage and watching the build
@MADFABRICATORSTV2 жыл бұрын
Yeah we have some good times :)
@shotsrodder2 жыл бұрын
Great tips Lucky 👍 your friend is lucky to have you 😂 no pun intended 😎
@TheCanadianBubba2 жыл бұрын
Just out enough to not catch the eye... maddening. Worse when you know somebody else knew about it ahead of you. Taking it in stride and moving forward like a boss ! Keep diggin' 👍
@MADFABRICATORSTV2 жыл бұрын
Totally.. my buddy Mark didn’t know either.. he got it with a pile of parts and was still wrapped in the newspaper from the chromer.. it could even been dropped at the chromer during polishing 🤷🏻♂️ it’s all good! Got refunded and using that to chrome another ..
@RustyOlive2 жыл бұрын
I swear! Every time I watch an episode. I think. This is way to short!! I wish this was a full feature document! I WANT MORE! Lol So sick! So jealous.. so hard!!
@MADFABRICATORSTV2 жыл бұрын
Thanks man.. it’s funny cause my analytics says the drop off is around 12 minutes haha They are in a playlist so in theory you could watch them all in a row and it would be full length 😂
@RustyOlive2 жыл бұрын
@@MADFABRICATORSTV what? Nooo? Some people just can’t appreciate the good sh$t when its right in front of them I guess. Maybe when the car is “done” … 🤣 I’ll go back and watch them all again. Lol Keep up the good work! Car and videos I’m looking forward to my new MFS shirts in the mail too.. super stoked
@stephenbukin66422 жыл бұрын
So Cool been really enjoying watching the build. keep up the good work lads..
@matthewrinehart23672 жыл бұрын
Dude, I love you friends. It's such a brotherhood. It's great the way you support each other!
@MADFABRICATORSTV2 жыл бұрын
Yeah I’m blessed to have great friends!
@THROTTLEPOWER2 жыл бұрын
Enjoyed............. 👍👍👍
@MADFABRICATORSTV2 жыл бұрын
Thanks for watching!
@THROTTLEPOWER2 жыл бұрын
@@MADFABRICATORSTV 👍
@matthewkranick49072 жыл бұрын
Another awesome episode...thank you again...love watching this come to life!!😎
@MADFABRICATORSTV2 жыл бұрын
Thank you for the support!
@murdoc65012 жыл бұрын
Just simply awesome. Thank you for taking us along for the build and upcoming ride. Just ordered some merch to support you and the channel. The hardest part of this is the wait for the next video/update on the progress. Keep moving forward!
@MADFABRICATORSTV2 жыл бұрын
Thanks you the support and thanks for ordering goods!!
@AHotrodShop2 жыл бұрын
Looking good
@knutbkristiansen2 жыл бұрын
I love those awesome episode s
@thumpershd2 жыл бұрын
Sorry about that chrome center, that's my luck too ;-) Watching with great interest, better luck moving forward!
@MADFABRICATORSTV2 жыл бұрын
Yeah sucks but that’s the part of Hot Rodding that not fun haha
@shedbythetracks2 жыл бұрын
That rear-end deal was hard to take.. Glad to see you are back on track. Endeavor to persevere.
@MADFABRICATORSTV2 жыл бұрын
Yeah it’s a bummer but gotta keep moving on
@substandardabuse60282 жыл бұрын
Been looking forward to seeing an update. 👍
@protc2 жыл бұрын
Love it!!!!
@sculptor61672 жыл бұрын
Shirt ordered! Keep up the good work...car is looking Great!
@MADFABRICATORSTV2 жыл бұрын
Thanks Chris! Appreciate the support..
@r1lark2 жыл бұрын
Man, that sucks on the chrome banjo. Like you say, that's hot rodding. At least your buddies came thru on another one.
@MADFABRICATORSTV2 жыл бұрын
Yeah totally sucks.. I actually had 2 others that we used for the internals so there was plenty of them just not chrome haha
@JohnnyJalopyArt2 жыл бұрын
great progress!
@MADFABRICATORSTV2 жыл бұрын
Thanks dude!
@black88coupe2 жыл бұрын
Cool.
@aaronhogan23712 жыл бұрын
Love this build!
@MADFABRICATORSTV2 жыл бұрын
Thanks!
@matthewrinehart23672 жыл бұрын
Yeah, I'm a dick for not subscribing, but I'm glad to see fresh vids!
@MADFABRICATORSTV2 жыл бұрын
I forgive you :)
@lesorcierharleyus55432 жыл бұрын
good job respect.👍👍🤘🤙
@dtrain14642 жыл бұрын
.. looking Groovy fellas.
@MADFABRICATORSTV2 жыл бұрын
Thanks dude!
@eddiezapien57132 жыл бұрын
Noice.
@TrashcanGarage2 жыл бұрын
😎👍
@AndyGeesGarage2 жыл бұрын
Shame about that centre section. I’d be tempted to try straightening it using a port-a-power. Might crack it though Thanks for the update I haven’t abandoned mine just busy with a race car
@Ecosse572 жыл бұрын
get back on that t!
@AndyGeesGarage2 жыл бұрын
@@Ecosse57 will be soon.
@MADFABRICATORSTV2 жыл бұрын
Yeah wasn’t worth trying to make it round.. Chrome was so nice too that it would of totally of F’ed it up..
@AndyGeesGarage2 жыл бұрын
@@MADFABRICATORSTV Lucky is right though it’ll make a cool lamp base or just hang it on the garage wall.
@glassblastcollision2 жыл бұрын
Put a short ten ton hydraulic cylinder inside it and warm it up with just a heat gun and pay attention to the movement. It's not out that far from round. Steel it clay!
@MADFABRICATORSTV2 жыл бұрын
Thanks but don’t want to risk damaging the chrome and I was refunded the money and sent it back :) easier to just get another one I have chromed..
@grahamparr3933 Жыл бұрын
Will you get your money back on the chrome casing🤔
@MADFABRICATORSTV Жыл бұрын
Yes I did. Mark was defiantly cool about and had no idea it was not round. He got it from a pile of parts he bought off someone so he never used it.
@jcerullo50152 жыл бұрын
those tube welded to the torque tube
@MADFABRICATORSTV2 жыл бұрын
Is that a question?
@jcerullo50152 жыл бұрын
@@MADFABRICATORSTV yes because I dont see a crossmember and not sure if it just camera angles
@MADFABRICATORSTV2 жыл бұрын
Yes there’s a mount on the torque tube that’s how it is on the stock set up too..
@bvcxz472 жыл бұрын
at 9:23 that bearing looks pitted
@anthonycarty94332 жыл бұрын
Glad you mentioned that , all that effort to rebuild the axle and they used pitted bearings . Ho hum .
@luckyburton47872 жыл бұрын
Rollers on that bearing are just fine. Plenty of life left and no it’s not much effort.